fix: fix image

Signed-off-by: Xinwei Xiong(cubxxw-openim) <3293172751nss@gmail.com>

.docker-compose_cfg/config.yaml

@@ -0,0 +1,79 @@
+# Copyright © 2023 OpenIM. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+#---------------Infrastructure configuration---------------------#
+etcd:
+  etcdSchema: openim  #默认即可
+  etcdAddr: [ 127.0.0.1:2379 ] #单机部署时，默认即可
+  userName:
+  password:
+  secret: openIM123
+
+mysql:
+  dbMysqlDatabaseName: admin_chat # 数据库名字 默认即可
+
+# 默认管理员账号
+admin:
+  defaultAccount:
+    account: [ "admin1", "admin2" ]
+    defaultPassword: [ "password1", "password2" ]
+    openIMUserID: [ "openIM123456", "openIMAdmin" ]
+    faceURL: [ "", "" ]
+    nickname: [ "admin1", "admin2" ]
+    level: [ 1, 100 ]
+
+
+adminapi:
+  openImAdminApiPort: [ 10009 ] #管理后台api服务端口，默认即可，需要开放此端口或做nginx转发
+  listenIP: 0.0.0.0
+
+chatapi:
+  openImChatApiPort: [ 10008 ] #登录注册，默认即可，需要开放此端口或做nginx转发
+  listenIP: 0.0.0.0
+
+rpcport: # rpc服务端口 默认即可
+  openImAdminPort: [ 30200 ]
+  openImChatPort: [ 30300 ]
+
+
+rpcregistername: #rpc注册服务名，默认即可
+  openImChatName: Chat
+  openImAdminCMSName: Admin
+
+chat:
+  codeTTL: 300 #短信验证码有效时间(秒)
+  superVerificationCode: 666666 # 超级验证码
+  alismsverify: #阿里云短信配置，在阿里云申请成功后修改以下四项
+    accessKeyId:
+    accessKeySecret:
+    signName:
+    verificationCodeTemplateCode:
+
+
+oss:
+  tempDir: enterprise-temp # 临时密钥上传的目录
+  dataDir: enterprise-data # 最终存放目录
+  aliyun:
+    endpoint: https://oss-cn-chengdu.aliyuncs.com
+    accessKeyID: ""
+    accessKeySecret: ""
+    bucket: ""
+  tencent:
+    BucketURL: ""
+    serviceURL: https://cos.COS_REGION.myqcloud.com
+    secretID: ""
+    secretKey: ""
+    sessionToken: ""
+    bucket: ""
+  use: "minio"

.docker-compose_cfg/datasource-compose.yaml

@@ -12,16 +12,16 @@
 # See the License for the specific language governing permissions and
 # limitations under the License.
 
-apiVersion: v1
-kind: ConfigMap
-metadata:
-  name: openim-cm
-data:
-  config.yaml: |+
-    {{- with .Values.config }}
-        {{- toYaml . | nindent 4 }}
-    {{- end }}
-  notification.yaml: |+
-    {{- with .Values.notification }}
-        {{- toYaml . | nindent 4 }}
-    {{- end }}
+#more datasource-compose.yaml 
+apiVersion: 1
+
+datasources:
+- name: Prometheus
+  type: prometheus
+  access: proxy
+  orgId: 1
+  url: http://127.0.0.1:9091
+  basicAuth: false
+  isDefault: true
+  version: 1
+  editable: true

.docker-compose_cfg/prometheus-compose.yml

@@ -0,0 +1,85 @@
+# Copyright © 2023 OpenIM. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+#more prometheus-compose.yml 
+global:
+  scrape_interval:     15s 
+  evaluation_interval: 15s 
+  external_labels:
+    monitor: 'openIM-monitor'
+
+scrape_configs:
+    - job_name: 'prometheus'
+      static_configs:
+      - targets: ['localhost:9091']
+
+    - job_name: 'openIM-server'
+      metrics_path: /metrics
+      static_configs:
+      - targets: ['localhost:10002']
+        labels:
+          group: 'api'
+
+      - targets: ['localhost:20110']
+        labels:
+          group: 'user'
+
+      - targets: ['localhost:20120']
+        labels:
+          group: 'friend'
+
+      - targets: ['localhost:20130']
+        labels:
+          group: 'message'
+
+      - targets: ['localhost:20140']
+        labels:
+          group: 'msg-gateway'    
+
+      - targets: ['localhost:20150']
+        labels:
+          group: 'group'
+
+      - targets: ['localhost:20160']
+        labels:
+          group: 'auth'
+
+      - targets: ['localhost:20170']
+        labels:
+          group: 'push'
+
+      - targets: ['localhost:20120']
+        labels:
+          group: 'friend'
+
+      
+      - targets: ['localhost:20230']
+        labels:
+          group: 'conversation' 
+
+      
+      - targets: ['localhost:21400', 'localhost:21401', 'localhost:21402', 'localhost:21403']
+        labels:
+          group: 'msg-transfer'
+       
+ 
+
+
+      
+
+    - job_name: 'node'  
+      scrape_interval: 8s
+      static_configs:
+      - targets: ['localhost:9100']
+     

.dockerignore

@@ -2,11 +2,11 @@
 
 # Ignore specific files
 .dockerignore
-.git
 
 # Ignore build artifacts
-logs/
 _output/
+logs/
+
 # Ignore non-essential documentation
 README.md
 README-zh_CN.md
@@ -17,6 +17,9 @@ CHANGELOG/
 # Ignore testing and linting configuration
 .golangci.yml
 
+# Ignore deployment-related files
+docker-compose.yaml
+deployments/
 
 # Ignore assets
 assets/

.env

@@ -1,20 +1,5 @@
-
-MONGO_IMAGE=mongo:6.0.2
-REDIS_IMAGE=redis:7.0.0
-ZOOKEEPER_IMAGE=bitnami/zookeeper:3.8
-KAFKA_IMAGE=bitnami/kafka:3.5.1
-MINIO_IMAGE=minio/minio:RELEASE.2024-01-11T07-46-16Z
-ETCD_IMAGE=quay.io/coreos/etcd:v3.5.13
-PROMETHEUS_IMAGE=prom/prometheus:v2.45.6
-ALERTMANAGER_IMAGE=prom/alertmanager:v0.27.0
-GRAFANA_IMAGE=grafana/grafana:11.0.1
-
-OPENIM_WEB_FRONT_IMAGE=openim/openim-web-front:release-v3.5.1
-OPENIM_ADMIN_FRONT_IMAGE=openim/openim-admin-front:release-v1.7
-
-#FRONT_IMAGE: use aliyun images
-#OPENIM_WEB_FRONT_IMAGE=registry.cn-hangzhou.aliyuncs.com/openimsdk/openim-web-front:release-v3.5.1
-#OPENIM_ADMIN_FRONT_IMAGE=registry.cn-hangzhou.aliyuncs.com/openimsdk/openim-admin-front:release-v1.7
-
-DATA_DIR=./
-
+USER=root
+PASSWORD=openIM123
+MINIO_ENDPOINT=http://127.0.0.1:10005
+API_URL=http://127.0.0.1:10002/object/
+DATA_DIR=./

.gitattributes

@@ -1 +0,0 @@
-*.sh text eol=lf

.github/.codecov.yml

@@ -20,20 +20,4 @@ coverage:
         paths:
           - pkg/* # only include coverage in "pkg/" folder
         informational: true # Always pass check
-      tools: # declare a new status context "tools"
-        paths:
-          - tools/* # only include coverage in "tools/" folder
-        informational: true # Always pass check
-      test: # declare a new status context "test"
-        paths:
-          - test/* # only include coverage in "test/" folder
-        informational: true # Always pass check
-      # internal: # declare a new status context "internal"
-      #   paths:
-      #     - internal/* # only include coverage in "internal/" folder
-      #   informational: true # Always pass check
-      # cmd: # declare a new status context "cmd"
-      #   paths:
-      #     - cmd/* # only include coverage in "cmd/" folder
-      #   informational: true # Always pass check
-    patch: off # disable the commit only checks
+    patch: off # disable the commit only checks

.github/dependabot.yml

@@ -0,0 +1,59 @@
+# Copyright © 2023 OpenIM. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# To get started with Dependabot version updates, you'll need to specify which
+# package ecosystems to update and where the package manifests are located.
+# Please see the documentation for all configuration options:
+# https://docs.github.com/github/administering-a-repository/configuration-options-for-dependency-updates
+
+version: 2
+updates:
+  - package-ecosystem: "gomod"
+    directory: "/"
+    schedule:
+      interval: "daily"
+      time: "08:00"
+    labels:
+      - "dependencies"
+    commit-message:
+      prefix: "feat"
+      include: "scope"
+    groups:
+      gomod-deps:
+        patterns:
+          - "*"
+  - package-ecosystem: "github-actions"
+    directory: "/"
+    schedule:
+      interval: "daily"
+      time: "08:00"
+    labels:
+      - "dependencies"
+    commit-message:
+      prefix: "chore"
+      include: "scope"
+    groups:
+      github-actions:
+        patterns:
+          - "*"
+  - package-ecosystem: "docker"
+    directory: "/"
+    schedule:
+      interval: "daily"
+      time: "08:00"
+    labels:
+      - "dependencies"
+    commit-message:
+      prefix: "feat"
+      include: "scope"

.github/release-drafter.yml

@@ -1,51 +0,0 @@
-# Copyright © 2023 OpenIM. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-name-template: 'v$RESOLVED_VERSION 🌈'
-tag-template: 'v$RESOLVED_VERSION'
-categories:
-  - title: '🚀 Features'
-    labels:
-      - 'feature'
-      - 'enhancement'
-  - title: '🐛 Bug Fixes'
-    labels:
-      - 'kind/fix'
-      - 'kind/feature'
-      - 'enhancement'
-      - 'kind/documentation'
-      - 'good first issue'
-  - title: '🧰 Maintenance'
-    label: 'chore'
-change-template: '- $TITLE @$AUTHOR (#$NUMBER)'
-change-title-escapes: '\<*_&' # You can add # and @ to disable mentions, and add ` to disable code blocks.
-version-resolver:
-  major:
-    labels:
-      - 'major'
-  minor:
-    labels:
-      - 'minor'
-  patch:
-    labels:
-      - 'patch'
-  default: patch
-template: |
-  ## Changes $PREVIOUS_TAG
-
-  $CHANGES
-
-  ## Contributors to this $REPOSITORY	release
-
-  $CONTRIBUTORS	

.github/standardizer.yml

@@ -1,50 +0,0 @@
-# https://github.com/marketplace/actions/conformity-checker-for-project
-baseConfig:
-  searchDirectory: "./"
-  ignoreCase: false
-
-directoryNaming:
-  allowHyphens: true
-  allowUnderscores: false
-  mustBeLowercase: true
-
-fileNaming:
-  allowHyphens: true
-  allowUnderscores: true
-  mustBeLowercase: true
-
-ignoreFormats:
-  - "\\.log$"
-  - "\\.env$"
-  - "README\\.md$"
-  - "_test\\.go$"
-  - "\\.md$"
-  - _test\\.txt$
-  - LICENSE
-  - Dockerfile
-  - CODEOWNERS
-  - Makefile
-
-ignoreDirectories:
-  - "vendor"
-  - ".git"
-  - "deployments"
-  - "node_modules"
-  - "logs"
-  - "CHANGELOG"
-  - "components"
-  - "_output"
-  - "tools/openim-web"
-  - "CHANGELOG"
-  - "examples/Test_directory"
-  - test/testdata
-
-fileTypeSpecificNaming:
-  ".yaml":
-    allowHyphens: true
-    allowUnderscores: false
-    mustBeLowercase: true
-  ".go":
-    allowHyphens: false
-    allowUnderscores: true
-    mustBeLowercase: true

.github/sync-release.yml

@@ -1,30 +0,0 @@
-# Copyright © 2023 OpenIM. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-OpenIMSDK/openim-docker:
-  - source: ./config
-    dest: ./openim-server/release/config
-    replace: true
-  - source: ./docs
-    dest: ./openim-server/release/docs
-    replace: true
-  - source: ./scripts
-    dest: ./openim-server/release/scripts
-    replace: true
-  - source: ./scripts
-    dest: ./scripts
-    replace: false
-  - source: ./Makefile
-    dest: ./Makefile
-    replace: false

.github/sync.yml

@@ -75,23 +75,6 @@ OpenIMSDK/OpenKF:
     dest: .github/.codecov.yml
     replace: false
 
-OpenIMSDK/openim-docker:
-  - source: ./config
-    dest: ./openim-server/main/config
-    replace: true
-  - source: ./docs
-    dest: ./openim-server/main/docs
-    replace: true
-  - source: ./scripts
-    dest: ./openim-server/main/scripts
-    replace: true
-  - source: ./scripts
-    dest: ./scripts
-    replace: true
-  - source: ./Makefile
-    dest: ./Makefile
-    replace: true
-
 group:
   # first group：common to all warehouses
   # TODO: add the required warehouse here
@@ -103,7 +86,7 @@ group:
       OpenIMSDK/community
       OpenIMSDK/openim-charts
       OpenIMSDK/openim-sdk-cpp@main
-    files:
+    files: 
       - source: LICENSE
         dest: LICENSE
         replace: false
@@ -133,4 +116,4 @@ group:
         replace: false
       - source: ./scripts/githooks/
         dest: ./scripts/githooks/
-        replace: true
+        replace: true

.github/workflows/auto-assign-issue.yml

@@ -27,7 +27,7 @@ jobs:
       issues: write
     steps:
       - name: Checkout code
-        uses: actions/checkout@v4
+        uses: actions/checkout@v3
 
       - name: Assign the issue
         run: |

.github/workflows/auto-gh-pr.yml

@@ -24,49 +24,37 @@ on:
     types: [created]
 
 jobs:
-  sync-issue-to-pr:
+  create-pr:
     runs-on: ubuntu-latest
+    if: github.event.pull_request.base.ref == 'main' && github.event.pull_request.merged == true
     steps:
-      - name: Checkout code
-        uses: actions/checkout@v4
-      
-      - name: Sync Issue to PR
-        if: github.event_name == 'pull_request' && github.event.pull_request.base.ref == 'main'
-        run: |
-          PR_BODY="${{ github.event.pull_request.body }}"
+        - name: Check out code
+          uses: actions/checkout@v3
+          with:
+            fetch-depth: 0
 
-          ISSUE_NUMBER=$(echo "$PR_BODY" | grep -oP 'Fixes #\K\d+')
-          if [[ -z "$ISSUE_NUMBER" ]]; then
-            echo "No Issue number found."
-            exit 1
-          fi
+        - name: Create PR to release branch
+          run: |
+            ISSUEID=$(gh pr view ${{ github.event.pull_request.number }} --repo $OWNER/$REPO | grep -oP 'Fixes #\K\d+')
+            echo "===========> $ISSUEID"
+            ISSUE=$(gh issue view $ISSUEID --repo $OWNER/$REPO --json labels,assignees,milestone,title)
+            echo "===========> $ISSUE"
 
-          echo "Issue number found: $ISSUE_NUMBER"
+            LABELS=$(echo $ISSUE | jq -r '.labels[] | select(.name) | .name' | jq -R -r -s -c 'split("\n")[:-1] | join(",")')
+            ASSIGNEES=$(echo $ISSUE | jq -r '.assignees[] | select(.login) | .login' | jq -R -s -c 'split("\n")[:-1] | join(",")')
+            MILESTONE=$(echo $ISSUE | jq -r '.milestone | select(.title) | .title')
+            TITLE=$(echo $ISSUE | jq -r '.title')
 
-          # Using GitHub CLI to get issue details
-          gh issue view "$ISSUE_NUMBER" --repo "${{ github.repository }}" --json labels,assignees,milestone,title > issue_data.json
+            gh pr edit ${{ github.event.pull_request.number }} --repo $OWNER/$REPO --add-label "$LABELS" --add-assignee "$ASSIGNEES" --milestone "$MILESTONE"
 
-          # Check if jq is installed
-          if ! command -v jq &> /dev/null; then
-            echo "Installing jq..."
-            sudo apt-get install -y jq
-          fi
-
-          # Parse data with jq
-          LABELS=$(jq -r '.labels | map(.name) | join(",")' issue_data.json)
-          ASSIGNEES=$(jq -r '.assignees | map(.login) | join(",")' issue_data.json)
-          MILESTONE=$(jq -r '.milestone.title' issue_data.json)
-
-          # Check if any of the fields are empty and set them to None
-          LABELS=${LABELS:-None}
-          ASSIGNEES=${ASSIGNEES:-None}
-          MILESTONE=${MILESTONE:-None}
-
-          # Edit the PR with issue details, handling empty fields
-          gh pr edit "${{ github.event.pull_request.number }}" --repo "${{ github.repository }}" \
-            ${LABELS:+--add-label "$LABELS"} \
-            ${ASSIGNEES:+--add-assignee "$ASSIGNEES"} \
-            ${MILESTONE:+--milestone "$MILESTONE"}
-        continue-on-error: true
-        env:
-          GITHUB_TOKEN: ${{ secrets.BOT_GITHUB_TOKEN }}
+            # git checkout -b bot/merge-to-release-$ISSUEID
+            # git push origin bot/merge-to-release-$ISSUEID
+            # gh pr create --base release --head bot/merge-to-release-$ISSUEID --title "Merge main to release" --body ""
+            # gh pr create --base main --head feat/auto-release-pr-624  --title "The bug is fixed" --body "$x" --repo OpenIMSDK/Open-IM-Server --reviewer "cubxxw"
+          continue-on-error: true
+          env:
+              GITHUB_TOKEN: ${{ secrets.BOT_GITHUB_TOKEN }}
+              GH_TOKEN: ${{ github.token }}
+              ISSUE: ${{ github.event.issue.html_url }}
+              OWNER: ${{ github.repository_owner }}
+              REPO: ${{ github.event.repository.name }}

.github/workflows/auto-invite.yml

@@ -27,19 +27,19 @@ jobs:
     steps:
 
       - name: Invite user to join our group
-        uses: peter-evans/create-or-update-comment@v4
+        uses: peter-evans/create-or-update-comment@v3
         with:
           token: ${{ secrets.BOT_GITHUB_TOKEN }}
           issue-number: ${{ github.event.issue.number }}
           body: |
             We value close connections with our users, developers, and contributors here at Open-IM-Server. With a large community and maintainer team, we're always here to help and support you. Whether you're looking to join our community or have any questions or suggestions, we welcome you to get in touch with us.
 
-            Our most recommended way to get in touch is through [Slack](https://join.slack.com/t/openimsdk/shared_invite/zt-22720d66b-o_FvKxMTGXtcnnnHiMqe9Q). Even if you're in China, Slack is usually not blocked by firewalls, making it an easy way to connect with us. Our Slack community is the ideal place to discuss and share ideas and suggestions with other users and developers of Open-IM-Server. You can ask technical questions, seek help, or share your experiences with other users of Open-IM-Server.
+            Our most recommended way to get in touch is through [Slack](https://join.slack.com/t/openimsdk/shared_invite/zt-1tmoj26uf-_FDy3dowVHBiGvLk9e5Xkg). Even if you're in China, Slack is usually not blocked by firewalls, making it an easy way to connect with us. Our Slack community is the ideal place to discuss and share ideas and suggestions with other users and developers of Open-IM-Server. You can ask technical questions, seek help, or share your experiences with other users of Open-IM-Server.
             
             In addition to Slack, we also offer the following ways to get in touch:
             
-            + <a href="https://join.slack.com/t/openimsdk/shared_invite/zt-22720d66b-o_FvKxMTGXtcnnnHiMqe9Q" target="_blank"><img src="https://img.shields.io/badge/Slack-OpenIM%2B-blueviolet?logo=slack&amp;logoColor=white"></a> We also have Slack channels for you to communicate and discuss. To join, visit https://slack.com/ and join our [👀 Open-IM-Server slack](https://join.slack.com/t/openimsdk/shared_invite/zt-22720d66b-o_FvKxMTGXtcnnnHiMqe9Q) team channel.
-            + <a href="https://mail.google.com/mail/u/0/?fs=1&tf=cm&to=info@openim.io" target="_blank"><img src="https://img.shields.io/badge/gmail-%40OOpenIMSDKCore?style=social&logo=gmail"></a> Get in touch with us on [Gmail](https://mail.google.com/mail/u/0/?fs=1&tf=cm&to=winxu81@gmail.com). If you have any questions or issues that need resolving, or any suggestions and feedback for our open source projects, please feel free to contact us via email.
+            + <a href="https://join.slack.com/t/openimsdk/shared_invite/zt-1tmoj26uf-_FDy3dowVHBiGvLk9e5Xkg" target="_blank"><img src="https://img.shields.io/badge/Slack-OpenIM%2B-blueviolet?logo=slack&amp;logoColor=white"></a> We also have Slack channels for you to communicate and discuss. To join, visit https://slack.com/ and join our [👀 Open-IM-Server slack](https://join.slack.com/t/openimsdk/shared_invite/zt-1tmoj26uf-_FDy3dowVHBiGvLk9e5Xkg) team channel.
+            + <a href="https://mail.google.com/mail/u/0/?fs=1&tf=cm&to=winxu81@gmail.com" target="_blank"><img src="https://img.shields.io/badge/gmail-%40OOpenIMSDKCore?style=social&logo=gmail"></a> Get in touch with us on [Gmail](https://mail.google.com/mail/u/0/?fs=1&tf=cm&to=winxu81@gmail.com). If you have any questions or issues that need resolving, or any suggestions and feedback for our open source projects, please feel free to contact us via email.
             + <a href="https://doc.rentsoft.cn/" target="_blank"><img src="https://img.shields.io/badge/%E5%8D%9A%E5%AE%A2-%40OpenIMSDKCore-blue?style=social&logo=Octopus%20Deploy"></a> Read our [blog](https://doc.rentsoft.cn/). Our blog is a great place to stay up-to-date with Open-IM-Server projects and trends. On the blog, we share our latest developments, tech trends, and other interesting information.
             + <a href="https://github.com/OpenIMSDK/OpenIM-Docs/blob/main/docs/images/WechatIMG20.jpeg" target="_blank"><img src="https://img.shields.io/badge/%E5%BE%AE%E4%BF%A1-OpenIMSDKCore-brightgreen?logo=wechat&style=flat-square"></a> Add [Wechat](https://github.com/OpenIMSDK/OpenIM-Docs/blob/main/docs/images/WechatIMG20.jpeg) and indicate that you are a user or developer of Open-IM-Server. We will process your request as soon as possible.
 

.github/workflows/auto-tag.yml

@@ -12,7 +12,7 @@
 # See the License for the specific language governing permissions and
 # limitations under the License.
 
-name: OpenIM Create Tag
+name: Create Tag
 
 on:
   issue_comment:
@@ -26,7 +26,7 @@ jobs:
     if: startsWith(github.event.comment.body, '/create tag')
     steps:
       - name: Checkout code
-        uses: actions/checkout@v4
+        uses: actions/checkout@v3
 
       - name: Validate version number and get comment
         id: validate

.github/workflows/bot-auto-cherry-pick.yml

@@ -12,7 +12,7 @@
 # See the License for the specific language governing permissions and
 # limitations under the License.
 
-name: Github Rebot for Cherry Pick when PR is merged
+name: 'Github Rebot for Cherry Pick when PR is merged'
 on:
   pull_request_target:
     types:
@@ -23,9 +23,8 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Comment cherry-pick command
-        uses: actions/github-script@v7
+        uses: actions/github-script@v6
         with:
-          github-token: ${{ secrets.BOT_GITHUB_TOKEN }}
           script: |
             const pr = context.payload.pull_request;
             if (!pr.merged) {
@@ -64,4 +63,5 @@ jobs:
               repo: context.repo.repo,
               issue_number: pr.number,
               body: cherryPickCmd
-            });
+            });
+          github-token: ${{ secrets.BOT_GITHUB_TOKEN }}

.github/workflows/bot-cherry-pick.yml

@@ -12,57 +12,22 @@
 # See the License for the specific language governing permissions and
 # limitations under the License.
 
-name: Github Robot for Cherry Pick On Comment
-
+name: Github Rebot for Cherry Pick On Comment
 on:
   issue_comment:
     types: [created]
-
 jobs:
   cherry-pick:
     name: Cherry Pick
-    if: github.event.issue.pull_request != '' && contains(github.event.comment.body, '/cherry-pick')
+    if: github.event.issue.pull_request != '' && contains(github.event.comment.body, '/cherry-pick') && github.event.comment.user.login=='kubbot'
     runs-on: ubuntu-latest
-
     steps:
       - name: Checkout the latest code
-        uses: actions/checkout@v4
+        uses: actions/checkout@v3
         with:
           token: ${{ secrets.BOT_GITHUB_TOKEN }}
-          fetch-depth: 0 # To ensure all history is available for cherry-picking
-
+          fetch-depth: 0 # otherwise, you will fail to push refs to dest repo
       - name: Automatic Cherry Pick
         uses: vendoo/gha-cherry-pick@v1
-        with:
-          # Assuming the cherry-pick commit SHA is passed in the comment like '/cherry-pick sha'
-          commit-sha: ${{ github.event.comment.body }}
         env:
-          GITHUB_TOKEN: ${{ secrets.BOT_GITHUB_TOKEN }}
-
-      - name: Create a new branch for PR
-        run: |
-          PR_BRANCH="cherry-pick-${GITHUB_SHA}-to-${{ github.base_ref }}"
-          git checkout -b $PR_BRANCH
-          git push origin $PR_BRANCH
-        env:
-          GITHUB_TOKEN: ${{ secrets.BOT_GITHUB_TOKEN }}
-
-      - name: Create Pull Request
-        uses: actions/github-script@v5
-        with:
-          script: |
-            const prTitle = "Cherry-pick to ${{ github.base_ref }}"
-            const prBody = "Automated cherry-pick of ${{ github.event.comment.body }}\n\n/cc @kubbot"
-            const base = "${{ github.base_ref }}"
-            const head = "cherry-pick-${{ github.sha }}-to-${{ github.base_ref }}"
-            const createPr = await github.rest.pulls.create({
-              owner: context.repo.owner,
-              repo: context.repo.repo,
-              title: prTitle,
-              body: prBody,
-              head: head,
-              base: base,
-              maintainer_can_modify: true, // Allows maintainers to edit the PR
-            })
-        env:
-          GITHUB_TOKEN: ${{ secrets.BOT_GITHUB_TOKEN }}
+          GITHUB_TOKEN: ${{ secrets.BOT_GITHUB_TOKEN }}

.github/workflows/build-docker-image.yml

@@ -19,27 +19,8 @@ on:
     branches:
       - main
       - release-*
-    paths-ignore:
-      - "docs/**"
-      - "README.md"
-      - "README_zh-CN.md"
-      - "**.md"
-      - "docs/**"
-      - "CONTRIBUTING.md"
     tags:
       - v*
-  pull_request:
-    types: [closed]
-    branches:
-      - main
-      - release-*
-    paths-ignore:
-      - "docs/**"
-      - "README.md"
-      - "README_zh-CN.md"
-      - "**.md"
-      - "docs/**"
-      - "CONTRIBUTING.md"
   workflow_dispatch:
 
 env:
@@ -49,119 +30,26 @@ env:
 jobs:
   build-dockerhub:
     runs-on: ubuntu-latest
-    if: ${{ !(github.event_name == 'pull_request' && github.event.pull_request.merged == false) }}
     steps:
-      - name: Checkout main repository
-        uses: actions/checkout@v4
-        with:
-          path: main-repo
-
+      - name: Checkout
+        uses: actions/checkout@v3
       - name: Set up QEMU
-        uses: docker/setup-qemu-action@v3
+        uses: docker/setup-qemu-action@v2
       - name: Set up Docker Buildx
-        uses: docker/setup-buildx-action@v3
-
-      - name: Build and push Docker image
-        uses: docker/build-push-action@v5
-        with:
-          context: ./main-repo
-          load: true
-          tags: "openim/openim-server:local"
-
-      - name: Checkout compose repository
-        uses: actions/checkout@v4
-        with:
-          repository: "openimsdk/openim-docker"
-          path: "compose-repo"
-
-      - name: Get Internal IP Address
-        id: get-ip
-        run: |
-          IP=$(hostname -I | awk '{print $1}')
-          echo "The IP Address is: $IP"
-          echo "::set-output name=ip::$IP"
-
-      - name: Update .env to use the local image
-        run: |
-          sed -i 's|OPENIM_SERVER_IMAGE=.*|OPENIM_SERVER_IMAGE=openim/openim-server:local|' ${{ github.workspace }}/compose-repo/.env
-          sed -i 's|MINIO_EXTERNAL_ADDRESS=.*|MINIO_EXTERNAL_ADDRESS=http://${{ steps.get-ip.outputs.ip }}:10005|' ${{ github.workspace }}/compose-repo/.env
-
-      - name: Start services using Docker Compose
-        run: |
-          cd ${{ github.workspace }}/compose-repo
-          docker compose up -d
-          sleep 30
-
-      - name: Check openim-server health
-        run: |
-          timeout=300
-          interval=30
-          elapsed=0
-          while [[ $elapsed -le $timeout ]]; do
-            if ! docker exec openim-server mage check; then
-              echo "openim-server is not ready, waiting..."
-              sleep $interval
-              elapsed=$(($elapsed + $interval))
-            else
-              echo "Health check successful"
-              exit 0
-            fi
-          done
-          echo "Health check failed after 5 minutes"
-          exit 1
-
-      - name: Check openim-chat health
-        if: success()
-        run: |
-          if ! docker exec openim-chat mage check; then
-              echo "openim-chat check failed"
-              exit 1
-            else
-              echo "Health check successful"
-              exit 0
-            fi
-
-      - name: Checkout e2e
-        if: success()
-        uses: actions/checkout@v4
-        with:
-          repository: "openimsdk/test-e2e"
-          path: e2e-repo
-
-      - name: Set up Python 3.9
-        uses: actions/setup-python@v4
-        with:
-          python-version: '3.9'
-      
-      - name: Install dependencies
-        run: |
-          sudo apt-get update
-          sudo apt-get install -y xvfb libxi6 libgconf-2-4
-          cd ${{ github.workspace }}/e2e-repo
-          pip install -r requirements.txt
-      
-      - name: Run tests
-        run: |
-          cd ${{ github.workspace }}/e2e-repo
-          xvfb-run --auto-servernum --server-args='-screen 0 1920x1080x24' pytest -v -s ./script
+        uses: docker/setup-buildx-action@v2
 
+# docker.io/openim/openim-server:latest
       - name: Extract metadata (tags, labels) for Docker
-        if: success()
         id: meta
-        uses: docker/metadata-action@v5.5.1
+        uses: docker/metadata-action@v4.6.0
         with:
-          images: |
-            openim/openim-server
-            ghcr.io/openimsdk/openim-server
-            registry.cn-hangzhou.aliyuncs.com/openimsdk/openim-server
+          images: openim/openim-server
           # generate Docker tags based on the following events/attributes
           tags: |
-            type=ref,event=tag
             type=schedule
             type=ref,event=branch
             type=ref,event=pr
             type=semver,pattern={{version}}
-            type=semver,pattern=v{{version}}
             type=semver,pattern={{major}}.{{minor}}
             type=semver,pattern={{major}}
             type=sha
@@ -172,6 +60,65 @@ jobs:
           username: ${{ secrets.DOCKER_USERNAME }}
           password: ${{ secrets.DOCKER_PASSWORD }}
 
+      - name: Build and push Docker image
+        uses: docker/build-push-action@v4
+        with:
+          context: .
+          # linux/ppc64le,linux/s390x
+          platforms: linux/amd64,linux/arm64
+          push: ${{ github.event_name != 'pull_request' }}
+          tags: ${{ steps.meta.outputs.tags }}
+          labels: ${{ steps.meta.outputs.labels }}
+
+  build-aliyun:
+    runs-on: ubuntu-latest
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v3
+      - name: Set up QEMU
+        uses: docker/setup-qemu-action@v2
+      - name: Set up Docker Buildx
+        uses: docker/setup-buildx-action@v2
+# registry.cn-hangzhou.aliyuncs.com/openimsdk/openim-server:latest
+      - name: Extract metadata (tags, labels) for Docker
+        id: meta2
+        uses: docker/metadata-action@v4.6.0
+        with:
+          images: registry.cn-hangzhou.aliyuncs.com/openimsdk/openim-server
+
+      - name: Log in to AliYun Docker Hub
+        uses: docker/login-action@v2
+        with:
+          registry: registry.cn-hangzhou.aliyuncs.com
+          username: ${{ secrets.ALIREGISTRY_USERNAME }}
+          password: ${{ secrets.ALIREGISTRY_TOKEN }}
+      
+      - name: Build and push Docker image
+        uses: docker/build-push-action@v4
+        with:
+          context: .
+          # linux/ppc64le,linux/s390x
+          platforms: linux/amd64,linux/arm64
+          push: ${{ github.event_name != 'pull_request' }}
+          tags: ${{ steps.meta2.outputs.tags }}
+          labels: ${{ steps.meta2.outputs.labels }}
+
+  build-ghcr:
+    runs-on: ubuntu-latest
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v3
+      - name: Set up QEMU
+        uses: docker/setup-qemu-action@v2
+      - name: Set up Docker Buildx
+        uses: docker/setup-buildx-action@v2
+# ghcr.io/openimsdk/openim-server:latest
+      - name: Extract metadata (tags, labels) for Docker
+        id: meta3
+        uses: docker/metadata-action@v4.6.0
+        with:
+          images: ghcr.io/openimsdk/openim-server
+
       - name: Log in to GitHub Container Registry
         uses: docker/login-action@v2
         with:
@@ -179,20 +126,12 @@ jobs:
           username: ${{ github.repository_owner }}
           password: ${{ secrets.GITHUB_TOKEN }}
 
-      - name: Log in to Aliyun Container Registry
-        uses: docker/login-action@v2
-        with:
-          registry: registry.cn-hangzhou.aliyuncs.com
-          username: ${{ secrets.ALIREGISTRY_USERNAME }}
-          password: ${{ secrets.ALIREGISTRY_TOKEN }}
-
       - name: Build and push Docker image
-        uses: docker/build-push-action@v5
+        uses: docker/build-push-action@v4
         with:
-          context: ./main-repo
-          push: true
+          context: .
           # linux/ppc64le,linux/s390x
           platforms: linux/amd64,linux/arm64
-          tags: ${{ steps.meta.outputs.tags }}
-          labels: ${{ steps.meta.outputs.labels }}
-      
+          push: ${{ github.event_name != 'pull_request' }}
+          tags: ${{ steps.meta3.outputs.tags }}
+          labels: ${{ steps.meta3.outputs.labels }}

.github/workflows/check-coverage.yml

@@ -12,7 +12,7 @@
 # See the License for the specific language governing permissions and
 # limitations under the License.
 
-name: OpenIM Check Coverage
+name: Check-Coverage
 
 on:
   workflow_dispatch:
@@ -41,7 +41,7 @@ jobs:
     runs-on: ubuntu-20.04
     steps:
       - name: Checkout
-        uses: actions/checkout@v4
+        uses: actions/checkout@v3
 
       - name: Setup Golang with cache
         uses: magnetikonline/action-golang-cache@v4
@@ -56,4 +56,4 @@ jobs:
         continue-on-error: true
 
       - name: Upload Coverage to Codecov
-        uses: codecov/codecov-action@v4
+        uses: codecov/codecov-action@v3

.github/workflows/cla.yml

@@ -12,7 +12,7 @@
 # See the License for the specific language governing permissions and
 # limitations under the License.
 
-name: OpenIM CLA Assistant
+name: "OpenIM CLA Assistant"
 on:
   issue_comment:
     types: [created]
@@ -33,7 +33,7 @@ env:
   OPEN_IM_SERVER_CLA_DOCUMENT: https://github.com/openim-sigs/cla/blob/main/README.md
   OPEN_IM_SERVER_SIGNATURES_PATH: signatures/${{ github.event.repository.name }}/cla.json
 
-  OPEN_IM_SERVER_ALLOWLIST: kubbot,openimbot,bot*,dependabot,sweep-ai,*bot,bot-*,bot/*,bot-/*,bot,*[bot]
+  OPEN_IM_SERVER_ALLOWLIST: kubbot,bot* 
 
 jobs:
   CLAAssistant:
@@ -41,7 +41,7 @@ jobs:
     steps:
       - name: "CLA Assistant"
         if: (github.event.comment.body == 'recheck' || github.event.comment.body == 'I have read the CLA Document and I hereby sign the CLA') || github.event_name == 'pull_request_target'
-        uses: contributor-assistant/github-action@v2.3.1
+        uses: contributor-assistant/github-action@v2.3.0
         env:
           GITHUB_TOKEN: ${{ secrets.BOT_GITHUB_TOKEN }}
           PERSONAL_ACCESS_TOKEN: ${{ secrets.REDBOT_GITHUB_TOKEN }}

.github/workflows/code-language-detector.yml

@@ -1,27 +0,0 @@
-# Copyright © 2024 OpenIM. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-name: Language Check Workflow Test
-
-on: [pull_request]
-
-jobs:
-  comment-language-detector:
-    runs-on: ubuntu-latest
-    steps:
-      - name: Checkout Repository
-        uses: actions/checkout@v4
-
-      - name: Code Language Detector
-        uses: kubecub/comment-lang-detector@v1.0.0

.github/workflows/codeql-analysis.yml

@@ -47,11 +47,11 @@ jobs:
 
     steps:
       - name: Checkout repository
-        uses: actions/checkout@v4
+        uses: actions/checkout@v3
 
       # Initializes the CodeQL tools for scanning.
       - name: Initialize CodeQL
-        uses: github/codeql-action/init@v3
+        uses: github/codeql-action/init@v2
         # Override language selection by uncommenting this and choosing your languages
         with:
           languages: go
@@ -59,7 +59,7 @@ jobs:
       # Autobuild attempts to build any compiled languages (C/C++, C#, Go, or Java).
       # If this step fails, then you should remove it and run the build manually (see below).
       - name: Autobuild
-        uses: github/codeql-action/autobuild@v3
+        uses: github/codeql-action/autobuild@v2
 
       # ℹ️ Command-line programs to run using the OS shell.
       # 📚 See https://docs.github.com/en/actions/using-workflows/workflow-syntax-for-github-actions#jobsjob_idstepsrun
@@ -73,4 +73,4 @@ jobs:
     #       make release
 
       - name: Perform CodeQL Analysis
-        uses: github/codeql-action/analyze@v3
+        uses: github/codeql-action/analyze@v2

.github/workflows/create_branch_on_tag.yml

@@ -19,16 +19,12 @@ on:
     tags:
       - 'v*.*.0'
 
-permissions:
-  contents: write
-  actions: write
-
 jobs:
   create-branch:
     runs-on: ubuntu-latest
     steps:
     - name: Check out code
-      uses: actions/checkout@v4
+      uses: actions/checkout@v3
       with:
         fetch-depth: 0
 
@@ -40,38 +36,41 @@ jobs:
     - name: Install git-chglog
       run: make install.git-chglog
 
-    - name: Create Branch and Push
-      env:
-        TAG_NAME: ${{ github.ref_name }}
+    - name: Create Branch
       run: |
+        TAG_NAME=${GITHUB_REF/refs\/tags\//}
         IFS='.' read -ra VERSION_PARTS <<< "$TAG_NAME"
         if [[ "${VERSION_PARTS[2]}" = "0" ]]; then
           BRANCH_NAME="release-v${VERSION_PARTS[0]}.${VERSION_PARTS[1]}"
           echo "Creating branch $BRANCH_NAME"
           git checkout -b "$BRANCH_NAME"
           git push origin "$BRANCH_NAME"
-        else
-          echo "Not a release tag. Skipping branch creation."
         fi
-      continue-on-error: true
 
-    - name: Create and Commit CHANGELOG
-      if: endsWith(github.ref_name, '.0')
-      run: |
-        git fetch --all
-        TAG_NAME=${GITHUB_REF#refs/tags/}
-        IFS='.' read -ra VERSION_PARTS <<< "$TAG_NAME"
-        git checkout main
-        cd CHANGELOG
-        git-chglog --tag-filter-pattern "v${VERSION_PARTS[0]}.${VERSION_PARTS[1]}.*" -o "CHANGELOG-${VERSION_PARTS[0]}.${VERSION_PARTS[1]}.md"
-        git add "CHANGELOG-${VERSION_PARTS[0]}.${VERSION_PARTS[1]}.md"
-        git commit -m "Update CHANGELOG for $TAG_NAME" || echo "No changes to commit."
-      continue-on-error: true
-
-    - name: Push CHANGELOG to Main
-      if: steps.create-and-commit-changelog.outputs.changes == 'true'
-      uses: ad-m/github-push-action@v0.8.0
+    - name: Push Changes
+      uses: stefanzweifel/git-auto-commit-action@v4
       with:
-        github_token: ${{ secrets.BOT_GITHUB_TOKEN }}
+        commit_message: "Auto Commit CHANGELOG"
+        branch: release-v${VERSION_PARTS[0]}.${VERSION_PARTS[1]}
+      env:
+        GITHUB_TOKEN: ${{ secrets.BOT_GITHUB_TOKEN }}
+
+    - name: Create and Push CHANGELOG
+      run: |
+        git checkout main
+        TAG_NAME=${GITHUB_REF/refs\/tags\//}
+        IFS='.' read -ra VERSION_PARTS <<< "$TAG_NAME"
+        if [[ "${VERSION_PARTS[2]}" = "0" ]]; then
+          cd CHANGELOG
+          git-chglog --tag-filter-pattern "v${VERSION_PARTS[0]}.${VERSION_PARTS[1]}.*"  -o "CHANGELOG-${VERSION_PARTS[0]}.${VERSION_PARTS[1]}.md"
+          git add "CHANGELOG-${VERSION_PARTS[0]}.${VERSION_PARTS[1]}.md"
+          git commit -m "Update CHANGELOG for $TAG_NAME"
+        fi
+
+    - name: Push Changes
+      uses: stefanzweifel/git-auto-commit-action@v4
+      with:
+        commit_message: "Auto Commit CHANGELOG"
         branch: main
-    continue-on-error: true
+      env:
+        GITHUB_TOKEN: ${{ secrets.BOT_GITHUB_TOKEN }}

.github/workflows/deploy.yml

@@ -0,0 +1,73 @@
+# Copyright © 2023 OpenIM open source community. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+name: OpenIM Deploy for dev
+
+on:
+  push:
+    branches:
+      - 'devops' # Only for the dev branch
+      - 'main'
+    paths:
+      - '.github/workflows/*'
+      # - '__test__/**' # dev No immediate testing is required
+      - 'src/**'
+      - 'Dockerfile'
+      - 'docker-compose.yml'
+      - 'bin/*'
+
+jobs:
+  deploy-dev:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v3
+      - name: executing remote ssh commands using password
+        uses: appleboy/ssh-action@v1.0.0
+        env:
+            OWNER: ${{ github.repository_owner }}
+            REPO: ${{ github.event.repository.name }}
+        with:
+          host: "${{ secrets.SG_M1_HOST }}, ${{ secrets.SG_N1_HOST }}, ${{ secrets.SG_N2_HOST}}"
+          username: ${{ secrets.SG_USERNAME }}
+          password: ${{ secrets.SG_PASSWORD }}
+          port: ${{ secrets.SG_PORT }}
+          envs: OWNER,REPO
+          script_stop: true
+          script: |
+            mkdir -p /test/openim
+            cd /test/openim
+            pwd;ls -al
+            echo "OWNER: $OWNER"
+            echo "REPO: $REPO"
+            git clone -b develop https://github.com/${OWNER}/${REPO}.git; cd ${REPO}
+            docker compose up -d
+
+
+    #   - name: deploy # Deployment
+    #     run: |
+    #       ssh work@182.92.xxx.xxx "
+    #         # 【Attention】Log in with the 'work' account, manually create /home/work/imooc-lego directory
+    #         # Then git clone https://username:password@github.com/imooc-lego/biz-editor-server.git -b dev (private repository, use GitHub username and password)
+    #         # Remember to delete origin to avoid exposing GitHub password
+    #         cd /home/work/imooc-lego/biz-editor-server;
+    #         git remote add origin https://openimbot:${{secrets.WFP_PASSWORD}}@github.com/OpenIMSDK/open-im-server.git;
+    #         git checkout dev;
+    #         git pull origin dev; # Download the latest code again
+    #         git remote remove origin; # Remove origin to avoid exposing GitHub password
+    #         # Start docker
+    #         docker-compose build editor-server; # Same as the service name in docker-compose.yml
+    #         docker-compose up -d;
+    #       "
+    #   - name: delete ssh key # Delete ssh key
+    #     run: rm -rf ~/.ssh/id_rsa

.github/workflows/depsreview.yaml

@@ -2,7 +2,7 @@
 # Licensed under the MIT License (the "License");
 # you may not use this file except in compliance with the License.
 
-name: OpenIM Dependency Review
+name: Dependency Review
 on: [pull_request]
 
 permissions:
@@ -13,6 +13,6 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: 'Checkout Repository'
-        uses: actions/checkout@v4
+        uses: actions/checkout@v3
       - name: 'Dependency Review'
-        uses: actions/dependency-review-action@v4
+        uses: actions/dependency-review-action@v3

.github/workflows/docker-buildx.bak

@@ -1,502 +0,0 @@
-# Copyright © 2023 OpenIM open source community. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-name: Docker Buildx Images CI
-
-on:
-  schedule:
-  - cron: '30 1 * * *'
-  push:
-    branches:
-      - release-*
-    tags:
-      - v*
-  workflow_dispatch:
-
-jobs:
-  build-ghcr:
-    runs-on: ubuntu-latest
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v4
-        
-      - name: Set up QEMU
-        uses: docker/setup-qemu-action@v3
-        
-      - name: Set up Docker Buildx
-        uses: docker/setup-buildx-action@v3
-        with:
-          install: true
-
-      - name: Cache Docker layers
-        uses: actions/cache@v4
-        with:
-          path: /tmp/.buildx-cache
-          key: ${{ runner.os }}-buildx-${{ github.sha }}
-          restore-keys: |
-            ${{ runner.os }}-buildx-
-
-      - name: Log in to GitHub Container Registry
-        uses: docker/login-action@v3
-        with:
-          registry: ghcr.io
-          username: ${{ github.repository_owner }}
-          password: ${{ secrets.GITHUB_TOKEN }}
-
-      - name: Log in to Docker Hub
-        uses: docker/login-action@v3
-        with:
-          username: ${{ secrets.DOCKER_USERNAME }}
-          password: ${{ secrets.DOCKER_PASSWORD }}
-
-      - name: Log in to AliYun Docker Hub
-        uses: docker/login-action@v3
-        with:
-          registry: registry.cn-hangzhou.aliyuncs.com
-          username: ${{ secrets.ALIREGISTRY_USERNAME }}
-          password: ${{ secrets.ALIREGISTRY_TOKEN }}
-
-################################################
-# build/
-# └── docker
-#     ├── openim-api
-#     │   └── Dockerfile
-#     ├── openim-cmdutils
-#     │   └── Dockerfile
-#     ├── openim-crontask
-#     │   └── Dockerfile
-#     ├── openim-msggateway
-#     │   └── Dockerfile
-#     ├── openim-msgtransfer
-#     │   └── Dockerfile
-#     ├── openim-push
-#     │   └── Dockerfile
-#     ├── openim-rpc-auth
-#     │   └── Dockerfile
-#     ├── openim-rpc-conversation
-#     │   └── Dockerfile
-#     ├── openim-rpc-friend
-#     │   └── Dockerfile
-#     ├── openim-rpc-group
-#     │   └── Dockerfile
-#     ├── openim-rpc-msg
-#     │   └── Dockerfile
-#     ├── openim-rpc-third
-#     │   └── Dockerfile
-#     └── openim-rpc-user
-#         └── Dockerfile
-#############################################
-
-      - name: Extract metadata (tags, labels) for Docker openim-api
-        id: meta1
-        uses: docker/metadata-action@v5.5.1
-        with:
-          images: |
-            ghcr.io/openimsdk/openim-api
-            openim/openim-api
-            registry.cn-hangzhou.aliyuncs.com/openimsdk/openim-api
-          tags: |
-            type=ref,event=tag
-            type=schedule
-            type=ref,event=branch
-            type=ref,event=pr
-            type=semver,pattern={{version}}
-            type=semver,pattern=v{{version}}
-            type=semver,pattern={{major}}.{{minor}}
-            type=semver,pattern={{major}}
-            type=sha
-
-      - name: Build and push Docker image for openim-api
-        uses: docker/build-push-action@v5
-        with:
-          context: .
-          file: ./build/images/openim-api/Dockerfile
-          platforms: linux/amd64,linux/arm64
-          push: ${{ github.event_name != 'pull_request' }}
-          tags: ${{ steps.meta1.outputs.tags }}
-          labels: ${{ steps.meta1.outputs.labels }}
-          cache-from: type=local,src=/tmp/.buildx-cache
-          cache-to: type=local,dest=/tmp/.buildx-cache
-
-      - name: Extract metadata (tags, labels) for Docker openim-cmdutils
-        id: meta2
-        uses: docker/metadata-action@v5.5.1
-        with:
-          images: |
-            ghcr.io/openimsdk/openim-cmdutils
-            openim/openim-cmdutils
-            registry.cn-hangzhou.aliyuncs.com/openimsdk/openim-cmdutils
-          tags: |
-            type=ref,event=tag
-            type=schedule
-            type=ref,event=branch
-            type=ref,event=pr
-            type=semver,pattern={{version}}
-            type=semver,pattern=v{{version}}
-            type=semver,pattern={{major}}.{{minor}}
-            type=semver,pattern={{major}}
-            type=sha
-
-      - name: Build and push Docker image for openim-cmdutils
-        uses: docker/build-push-action@v5
-        with:
-          context: .
-          file: ./build/images/openim-cmdutils/Dockerfile
-          platforms: linux/amd64,linux/arm64
-          push: ${{ github.event_name != 'pull_request' }}
-          tags: ${{ steps.meta2.outputs.tags }}
-          labels: ${{ steps.meta2.outputs.labels }}
-          cache-from: type=local,src=/tmp/.buildx-cache
-          cache-to: type=local,dest=/tmp/.buildx-cache
-
-      - name: Extract metadata (tags, labels) for Docker openim-crontask
-        id: meta3
-        uses: docker/metadata-action@v5.5.1
-        with:
-          images: |
-            ghcr.io/openimsdk/openim-crontask
-            openim/openim-crontask
-            registry.cn-hangzhou.aliyuncs.com/openimsdk/openim-crontask
-          tags: |
-            type=ref,event=tag
-            type=schedule
-            type=ref,event=branch
-            type=ref,event=pr
-            type=semver,pattern={{version}}
-            type=semver,pattern=v{{version}}
-            type=semver,pattern={{major}}.{{minor}}
-            type=semver,pattern={{major}}
-            type=sha
-
-      - name: Build and push Docker image for openim-crontask
-        uses: docker/build-push-action@v5
-        with:
-          context: .
-          file: ./build/images/openim-crontask/Dockerfile
-          platforms: linux/amd64,linux/arm64
-          push: ${{ github.event_name != 'pull_request' }}
-          tags: ${{ steps.meta3.outputs.tags }}
-          labels: ${{ steps.meta3.outputs.labels }}
-          cache-from: type=local,src=/tmp/.buildx-cache
-          cache-to: type=local,dest=/tmp/.buildx-cache
-
-      - name: Extract metadata (tags, labels) for Docker openim-msggateway
-        id: meta4
-        uses: docker/metadata-action@v5.5.1
-        with:
-          images: |
-            ghcr.io/openimsdk/openim-msggateway
-            openim/openim-msggateway
-            registry.cn-hangzhou.aliyuncs.com/openimsdk/openim-msggateway
-          tags: |
-            type=ref,event=tag
-            type=schedule
-            type=ref,event=branch
-            type=ref,event=pr
-            type=semver,pattern={{version}}
-            type=semver,pattern=v{{version}}
-            type=semver,pattern={{major}}.{{minor}}
-            type=semver,pattern={{major}}
-            type=sha
-
-      - name: Build and push Docker image for openim-msggateway
-        uses: docker/build-push-action@v5
-        with:
-          context: .
-          file: ./build/images/openim-msggateway/Dockerfile
-          platforms: linux/amd64,linux/arm64
-          push: ${{ github.event_name != 'pull_request' }}
-          tags: ${{ steps.meta4.outputs.tags }}
-          labels: ${{ steps.meta4.outputs.labels }}
-          cache-from: type=local,src=/tmp/.buildx-cache
-          cache-to: type=local,dest=/tmp/.buildx-cache
-
-      - name: Extract metadata (tags, labels) for Docker openim-msgtransfer
-        id: meta5
-        uses: docker/metadata-action@v5.5.1
-        with:
-          images: |
-            ghcr.io/openimsdk/openim-msgtransfer
-            openim/openim-msgtransfer
-            registry.cn-hangzhou.aliyuncs.com/openimsdk/openim-msgtransfer
-          tags: |
-            type=ref,event=tag
-            type=schedule
-            type=ref,event=branch
-            type=ref,event=pr
-            type=semver,pattern={{version}}
-            type=semver,pattern=v{{version}}
-            type=semver,pattern={{major}}.{{minor}}
-            type=semver,pattern={{major}}
-            type=sha
-
-      - name: Build and push Docker image for openim-msgtransfer
-        uses: docker/build-push-action@v5
-        with:
-          context: .
-          file: ./build/images/openim-msgtransfer/Dockerfile
-          platforms: linux/amd64,linux/arm64
-          push: ${{ github.event_name != 'pull_request' }}
-          tags: ${{ steps.meta5.outputs.tags }}
-          labels: ${{ steps.meta5.outputs.labels }}
-          cache-from: type=local,src=/tmp/.buildx-cache
-          cache-to: type=local,dest=/tmp/.buildx-cache
-          
-      - name: Extract metadata (tags, labels) for Docker openim-push
-        id: meta6
-        uses: docker/metadata-action@v5.5.1
-        with:
-          images: |
-            ghcr.io/openimsdk/openim-push
-            openim/openim-push
-            registry.cn-hangzhou.aliyuncs.com/openimsdk/openim-push
-          tags: |
-            type=ref,event=tag
-            type=schedule
-            type=ref,event=branch
-            type=ref,event=pr
-            type=semver,pattern={{version}}
-            type=semver,pattern=v{{version}}
-            type=semver,pattern={{major}}.{{minor}}
-            type=semver,pattern={{major}}
-            type=sha
-
-      - name: Build and push Docker image for openim-push
-        uses: docker/build-push-action@v5
-        with:
-          context: .
-          file: ./build/images/openim-push/Dockerfile
-          platforms: linux/amd64,linux/arm64
-          push: ${{ github.event_name != 'pull_request' }}
-          tags: ${{ steps.meta6.outputs.tags }}
-          labels: ${{ steps.meta6.outputs.labels }}
-          cache-from: type=local,src=/tmp/.buildx-cache
-          cache-to: type=local,dest=/tmp/.buildx-cache
-
-      - name: Extract metadata (tags, labels) for Docker openim-rpc-auth
-        id: meta7
-        uses: docker/metadata-action@v5.5.1
-        with:
-          images: |
-            ghcr.io/openimsdk/openim-rpc-auth
-            openim/openim-rpc-auth
-            registry.cn-hangzhou.aliyuncs.com/openimsdk/openim-rpc-auth
-          tags: |
-            type=ref,event=tag
-            type=schedule
-            type=ref,event=branch
-            type=ref,event=pr
-            type=semver,pattern={{version}}
-            type=semver,pattern=v{{version}}
-            type=semver,pattern={{major}}.{{minor}}
-            type=semver,pattern={{major}}
-            type=sha
-
-      - name: Build and push Docker image for openim-rpc-auth
-        uses: docker/build-push-action@v5
-        with:
-          context: .
-          file: ./build/images/openim-rpc-auth/Dockerfile
-          platforms: linux/amd64,linux/arm64
-          push: ${{ github.event_name != 'pull_request' }}
-          tags: ${{ steps.meta7.outputs.tags }}
-          labels: ${{ steps.meta7.outputs.labels }}
-          cache-from: type=local,src=/tmp/.buildx-cache
-          cache-to: type=local,dest=/tmp/.buildx-cache
-
-      - name: Extract metadata (tags, labels) for Docker openim-rpc-conversation
-        id: meta8
-        uses: docker/metadata-action@v5.5.1
-        with:
-          images: |
-            ghcr.io/openimsdk/openim-rpc-conversation
-            openim/openim-rpc-conversation
-            registry.cn-hangzhou.aliyuncs.com/openimsdk/openim-rpc-conversation
-          tags: |
-            type=ref,event=tag
-            type=schedule
-            type=ref,event=branch
-            type=ref,event=pr
-            type=semver,pattern={{version}}
-            type=semver,pattern=v{{version}}
-            type=semver,pattern={{major}}.{{minor}}
-            type=semver,pattern={{major}}
-            type=sha
-
-      - name: Build and push Docker image for openim-rpc-conversation
-        uses: docker/build-push-action@v5
-        with:
-          context: .
-          file: ./build/images/openim-rpc-conversation/Dockerfile
-          platforms: linux/amd64,linux/arm64
-          push: ${{ github.event_name != 'pull_request' }}
-          tags: ${{ steps.meta8.outputs.tags }}
-          labels: ${{ steps.meta8.outputs.labels }}
-          cache-from: type=local,src=/tmp/.buildx-cache
-          cache-to: type=local,dest=/tmp/.buildx-cache
-
-      - name: Extract metadata (tags, labels) for Docker openim-rpc-friend
-        id: meta9
-        uses: docker/metadata-action@v5.5.1
-        with:
-          images: |
-            ghcr.io/openimsdk/openim-rpc-friend
-            openim/openim-rpc-friend
-            registry.cn-hangzhou.aliyuncs.com/openimsdk/openim-rpc-friend
-          tags: |
-            type=ref,event=tag
-            type=schedule
-            type=ref,event=branch
-            type=ref,event=pr
-            type=semver,pattern={{version}}
-            type=semver,pattern=v{{version}}
-            type=semver,pattern={{major}}.{{minor}}
-            type=semver,pattern={{major}}
-            type=sha
-
-      - name: Build and push Docker image for openim-rpc-friend
-        uses: docker/build-push-action@v5
-        with:
-          context: .
-          file: ./build/images/openim-rpc-friend/Dockerfile
-          platforms: linux/amd64,linux/arm64
-          push: ${{ github.event_name != 'pull_request' }}
-          tags: ${{ steps.meta9.outputs.tags }}
-          labels: ${{ steps.meta9.outputs.labels }}
-          cache-from: type=local,src=/tmp/.buildx-cache
-          cache-to: type=local,dest=/tmp/.buildx-cache
-
-      - name: Extract metadata (tags, labels) for Docker openim-rpc-group
-        id: meta10
-        uses: docker/metadata-action@v5.5.1
-        with:
-          images: |
-            ghcr.io/openimsdk/openim-rpc-group
-            openim/openim-rpc-group
-            registry.cn-hangzhou.aliyuncs.com/openimsdk/openim-rpc-group
-          tags: |
-            type=ref,event=tag
-            type=schedule
-            type=ref,event=branch
-            type=ref,event=pr
-            type=semver,pattern={{version}}
-            type=semver,pattern=v{{version}}
-            type=semver,pattern={{major}}.{{minor}}
-            type=semver,pattern={{major}}
-            type=sha
-
-      - name: Build and push Docker image for openim-rpc-group
-        uses: docker/build-push-action@v5
-        with:
-          context: .
-          file: ./build/images/openim-rpc-group/Dockerfile
-          platforms: linux/amd64,linux/arm64
-          push: ${{ github.event_name != 'pull_request' }}
-          tags: ${{ steps.meta10.outputs.tags }}
-          labels: ${{ steps.meta10.outputs.labels }}
-          cache-from: type=local,src=/tmp/.buildx-cache
-          cache-to: type=local,dest=/tmp/.buildx-cache
-
-      - name: Extract metadata (tags, labels) for Docker openim-rpc-msg
-        id: meta11
-        uses: docker/metadata-action@v5.5.1
-        with:
-          images: |
-            ghcr.io/openimsdk/openim-rpc-msg
-            openim/openim-rpc-msg
-            registry.cn-hangzhou.aliyuncs.com/openimsdk/openim-rpc-msg
-          tags: |
-            type=ref,event=tag
-            type=schedule
-            type=ref,event=branch
-            type=ref,event=pr
-            type=semver,pattern={{version}}
-            type=semver,pattern=v{{version}}
-            type=semver,pattern={{major}}.{{minor}}
-            type=semver,pattern={{major}}
-            type=sha
-
-      - name: Build and push Docker image for openim-rpc-msg
-        uses: docker/build-push-action@v5
-        with:
-          context: .
-          file: ./build/images/openim-rpc-msg/Dockerfile
-          platforms: linux/amd64,linux/arm64
-          push: ${{ github.event_name != 'pull_request' }}
-          tags: ${{ steps.meta11.outputs.tags }}
-          labels: ${{ steps.meta11.outputs.labels }}
-          cache-from: type=local,src=/tmp/.buildx-cache
-          cache-to: type=local,dest=/tmp/.buildx-cache
-
-      - name: Extract metadata (tags, labels) for Docker openim-rpc-third
-        id: meta12
-        uses: docker/metadata-action@v5.5.1
-        with:
-          images: |
-            ghcr.io/openimsdk/openim-rpc-third
-            openim/openim-rpc-third
-            registry.cn-hangzhou.aliyuncs.com/openimsdk/openim-rpc-third
-          tags: |
-            type=ref,event=tag
-            type=schedule
-            type=ref,event=branch
-            type=ref,event=pr
-            type=semver,pattern={{version}}
-            type=semver,pattern=v{{version}}
-            type=semver,pattern={{major}}.{{minor}}
-            type=semver,pattern={{major}}
-            type=sha
-
-      - name: Build and push Docker image for openim-rpc-third
-        uses: docker/build-push-action@v5
-        with:
-          context: .
-          file: ./build/images/openim-rpc-third/Dockerfile
-          platforms: linux/amd64,linux/arm64
-          push: ${{ github.event_name != 'pull_request' }}
-          tags: ${{ steps.meta12.outputs.tags }}
-          labels: ${{ steps.meta12.outputs.labels }}
-          cache-from: type=local,src=/tmp/.buildx-cache
-          cache-to: type=local,dest=/tmp/.buildx-cache
-
-      - name: Extract metadata (tags, labels) for Docker openim-rpc-user
-        id: meta13
-        uses: docker/metadata-action@v5.5.1
-        with:
-          images: |
-            ghcr.io/openimsdk/openim-rpc-user
-            openim/openim-rpc-user
-            registry.cn-hangzhou.aliyuncs.com/openimsdk/openim-rpc-user
-          tags: |
-            type=ref,event=tag
-            type=schedule
-            type=ref,event=branch
-            type=ref,event=pr
-            type=semver,pattern={{version}}
-            type=semver,pattern=v{{version}}
-            type=semver,pattern={{major}}.{{minor}}
-            type=semver,pattern={{major}}
-            type=sha
-
-      - name: Build and push Docker image for openim-rpc-user
-        uses: docker/build-push-action@v5
-        with:
-          context: .
-          file: ./build/images/openim-rpc-user/Dockerfile
-          platforms: linux/amd64,linux/arm64
-          push: ${{ github.event_name != 'pull_request' }}
-          tags: ${{ steps.meta13.outputs.tags }}
-          labels: ${{ steps.meta13.outputs.labels }}
-          cache-from: type=local,src=/tmp/.buildx-cache
-          cache-to: type=local,dest=/tmp/.buildx-cache

.github/workflows/docker-buildx.yml

@@ -0,0 +1,320 @@
+# Copyright © 2023 OpenIM open source community. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+name: Docker Buildx Images CI
+
+on:
+  schedule:
+  - cron: '30 1 * * *'
+  push:
+    branches:
+      - release-*
+    tags:
+      - v*
+  workflow_dispatch:
+
+jobs:
+  build-ghcr:
+    runs-on: ubuntu-latest
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v3
+        
+      - name: Set up QEMU
+        uses: docker/setup-qemu-action@v2
+        
+      - name: Set up Docker Buildx
+        uses: docker/setup-buildx-action@v2
+        with:
+          install: true
+
+      - name: Cache Docker layers
+        uses: actions/cache@v3
+        with:
+          path: /tmp/.buildx-cache
+          key: ${{ runner.os }}-buildx-${{ github.sha }}
+          restore-keys: |
+            ${{ runner.os }}-buildx-
+
+      - name: Log in to GitHub Container Registry
+        uses: docker/login-action@v2
+        with:
+          registry: ghcr.io
+          username: ${{ github.repository_owner }}
+          password: ${{ secrets.GITHUB_TOKEN }}
+
+################################################
+# build/
+# └── docker
+#     ├── openim-api
+#     │   └── Dockerfile
+#     ├── openim-cmdutils
+#     │   └── Dockerfile
+#     ├── openim-crontask
+#     │   └── Dockerfile
+#     ├── openim-msggateway
+#     │   └── Dockerfile
+#     ├── openim-msgtransfer
+#     │   └── Dockerfile
+#     ├── openim-push
+#     │   └── Dockerfile
+#     ├── openim-rpc-auth
+#     │   └── Dockerfile
+#     ├── openim-rpc-conversation
+#     │   └── Dockerfile
+#     ├── openim-rpc-friend
+#     │   └── Dockerfile
+#     ├── openim-rpc-group
+#     │   └── Dockerfile
+#     ├── openim-rpc-msg
+#     │   └── Dockerfile
+#     ├── openim-rpc-third
+#     │   └── Dockerfile
+#     └── openim-rpc-user
+#         └── Dockerfile
+#############################################
+
+      - name: Extract metadata (tags, labels) for Docker openim-api
+        id: meta1
+        uses: docker/metadata-action@v4.6.0
+        with:
+          images: ghcr.io/openimsdk/openim-api
+
+      - name: Build and push Docker image for openim-api
+        uses: docker/build-push-action@v4
+        with:
+          context: .
+          file: ./build/docker/openim-api/Dockerfile
+          platforms: linux/amd64,linux/arm64
+          push: ${{ github.event_name != 'pull_request' }}
+          tags: ${{ steps.meta1.outputs.tags }}
+          labels: ${{ steps.meta1.outputs.labels }}
+          cache-from: type=local,src=/tmp/.buildx-cache
+          cache-to: type=local,dest=/tmp/.buildx-cache
+
+      - name: Extract metadata (tags, labels) for Docker openim-cmdutils
+        id: meta2
+        uses: docker/metadata-action@v4.6.0
+        with:
+          images: ghcr.io/openimsdk/openim-cmdutils
+
+      - name: Build and push Docker image for openim-cmdutils
+        uses: docker/build-push-action@v4
+        with:
+          context: .
+          file: ./build/docker/openim-cmdutils/Dockerfile
+          platforms: linux/amd64,linux/arm64
+          push: ${{ github.event_name != 'pull_request' }}
+          tags: ${{ steps.meta2.outputs.tags }}
+          labels: ${{ steps.meta2.outputs.labels }}
+          cache-from: type=local,src=/tmp/.buildx-cache
+          cache-to: type=local,dest=/tmp/.buildx-cache
+
+      - name: Extract metadata (tags, labels) for Docker openim-crontask
+        id: meta3
+        uses: docker/metadata-action@v4.6.0
+        with:
+          images: ghcr.io/openimsdk/openim-crontask
+
+      - name: Build and push Docker image for openim-crontask
+        uses: docker/build-push-action@v4
+        with:
+          context: .
+          file: ./build/docker/openim-crontask/Dockerfile
+          platforms: linux/amd64,linux/arm64
+          push: ${{ github.event_name != 'pull_request' }}
+          tags: ${{ steps.meta3.outputs.tags }}
+          labels: ${{ steps.meta3.outputs.labels }}
+          cache-from: type=local,src=/tmp/.buildx-cache
+          cache-to: type=local,dest=/tmp/.buildx-cache
+
+      - name: Extract metadata (tags, labels) for Docker openim-msggateway
+        id: meta4
+        uses: docker/metadata-action@v4.6.0
+        with:
+          images: ghcr.io/openimsdk/openim-msggateway
+
+      - name: Build and push Docker image for openim-msggateway
+        uses: docker/build-push-action@v4
+        with:
+          context: .
+          file: ./build/docker/openim-msggateway/Dockerfile
+          platforms: linux/amd64,linux/arm64
+          push: ${{ github.event_name != 'pull_request' }}
+          tags: ${{ steps.meta4.outputs.tags }}
+          labels: ${{ steps.meta4.outputs.labels }}
+          cache-from: type=local,src=/tmp/.buildx-cache
+          cache-to: type=local,dest=/tmp/.buildx-cache
+
+      - name: Extract metadata (tags, labels) for Docker openim-msgtransfer
+        id: meta5
+        uses: docker/metadata-action@v4.6.0
+        with:
+          images: ghcr.io/openimsdk/openim-msgtransfer
+
+      - name: Build and push Docker image for openim-msgtransfer
+        uses: docker/build-push-action@v4
+        with:
+          context: .
+          file: ./build/docker/openim-msgtransfer/Dockerfile
+          platforms: linux/amd64,linux/arm64
+          push: ${{ github.event_name != 'pull_request' }}
+          tags: ${{ steps.meta5.outputs.tags }}
+          labels: ${{ steps.meta5.outputs.labels }}
+          cache-from: type=local,src=/tmp/.buildx-cache
+          cache-to: type=local,dest=/tmp/.buildx-cache
+          
+      - name: Extract metadata (tags, labels) for Docker openim-push
+        id: meta6
+        uses: docker/metadata-action@v4.6.0
+        with:
+          images: ghcr.io/openimsdk/openim-push
+
+      - name: Build and push Docker image for openim-push
+        uses: docker/build-push-action@v4
+        with:
+          context: .
+          file: ./build/docker/openim-push/Dockerfile
+          platforms: linux/amd64,linux/arm64
+          push: ${{ github.event_name != 'pull_request' }}
+          tags: ${{ steps.meta6.outputs.tags }}
+          labels: ${{ steps.meta6.outputs.labels }}
+          cache-from: type=local,src=/tmp/.buildx-cache
+          cache-to: type=local,dest=/tmp/.buildx-cache
+
+      - name: Extract metadata (tags, labels) for Docker openim-rpc-auth
+        id: meta7
+        uses: docker/metadata-action@v4.6.0
+        with:
+          images: ghcr.io/openimsdk/openim-rpc-auth
+
+      - name: Build and push Docker image for openim-rpc-auth
+        uses: docker/build-push-action@v4
+        with:
+          context: .
+          file: ./build/docker/openim-rpc-auth/Dockerfile
+          platforms: linux/amd64,linux/arm64
+          push: ${{ github.event_name != 'pull_request' }}
+          tags: ${{ steps.meta7.outputs.tags }}
+          labels: ${{ steps.meta7.outputs.labels }}
+          cache-from: type=local,src=/tmp/.buildx-cache
+          cache-to: type=local,dest=/tmp/.buildx-cache
+
+      - name: Extract metadata (tags, labels) for Docker openim-rpc-conversation
+        id: meta8
+        uses: docker/metadata-action@v4.6.0
+        with:
+          images: ghcr.io/openimsdk/openim-rpc-conversation
+
+      - name: Build and push Docker image for openim-rpc-conversation
+        uses: docker/build-push-action@v4
+        with:
+          context: .
+          file: ./build/docker/openim-rpc-conversation/Dockerfile
+          platforms: linux/amd64,linux/arm64
+          push: ${{ github.event_name != 'pull_request' }}
+          tags: ${{ steps.meta8.outputs.tags }}
+          labels: ${{ steps.meta8.outputs.labels }}
+          cache-from: type=local,src=/tmp/.buildx-cache
+          cache-to: type=local,dest=/tmp/.buildx-cache
+
+      - name: Extract metadata (tags, labels) for Docker openim-rpc-friend
+        id: meta9
+        uses: docker/metadata-action@v4.6.0
+        with:
+          images: ghcr.io/openimsdk/openim-rpc-friend
+
+      - name: Build and push Docker image for openim-rpc-friend
+        uses: docker/build-push-action@v4
+        with:
+          context: .
+          file: ./build/docker/openim-rpc-friend/Dockerfile
+          platforms: linux/amd64,linux/arm64
+          push: ${{ github.event_name != 'pull_request' }}
+          tags: ${{ steps.meta9.outputs.tags }}
+          labels: ${{ steps.meta9.outputs.labels }}
+          cache-from: type=local,src=/tmp/.buildx-cache
+          cache-to: type=local,dest=/tmp/.buildx-cache
+
+      - name: Extract metadata (tags, labels) for Docker openim-rpc-group
+        id: meta10
+        uses: docker/metadata-action@v4.6.0
+        with:
+          images: ghcr.io/openimsdk/openim-rpc-group
+
+      - name: Build and push Docker image for openim-rpc-group
+        uses: docker/build-push-action@v4
+        with:
+          context: .
+          file: ./build/docker/openim-rpc-group/Dockerfile
+          platforms: linux/amd64,linux/arm64
+          push: ${{ github.event_name != 'pull_request' }}
+          tags: ${{ steps.meta10.outputs.tags }}
+          labels: ${{ steps.meta10.outputs.labels }}
+          cache-from: type=local,src=/tmp/.buildx-cache
+          cache-to: type=local,dest=/tmp/.buildx-cache
+
+      - name: Extract metadata (tags, labels) for Docker openim-rpc-msg
+        id: meta11
+        uses: docker/metadata-action@v4.6.0
+        with:
+          images: ghcr.io/openimsdk/openim-rpc-msg
+
+      - name: Build and push Docker image for openim-rpc-msg
+        uses: docker/build-push-action@v4
+        with:
+          context: .
+          file: ./build/docker/openim-rpc-msg/Dockerfile
+          platforms: linux/amd64,linux/arm64
+          push: ${{ github.event_name != 'pull_request' }}
+          tags: ${{ steps.meta11.outputs.tags }}
+          labels: ${{ steps.meta11.outputs.labels }}
+          cache-from: type=local,src=/tmp/.buildx-cache
+          cache-to: type=local,dest=/tmp/.buildx-cache
+
+      - name: Extract metadata (tags, labels) for Docker openim-rpc-third
+        id: meta12
+        uses: docker/metadata-action@v4.6.0
+        with:
+          images: ghcr.io/openimsdk/openim-rpc-third
+
+      - name: Build and push Docker image for openim-rpc-third
+        uses: docker/build-push-action@v4
+        with:
+          context: .
+          file: ./build/docker/openim-rpc-third/Dockerfile
+          platforms: linux/amd64,linux/arm64
+          push: ${{ github.event_name != 'pull_request' }}
+          tags: ${{ steps.meta12.outputs.tags }}
+          labels: ${{ steps.meta12.outputs.labels }}
+          cache-from: type=local,src=/tmp/.buildx-cache
+          cache-to: type=local,dest=/tmp/.buildx-cache
+
+      - name: Extract metadata (tags, labels) for Docker openim-rpc-user
+        id: meta13
+        uses: docker/metadata-action@v4.6.0
+        with:
+          images: ghcr.io/openimsdk/openim-rpc-user
+
+      - name: Build and push Docker image for openim-rpc-user
+        uses: docker/build-push-action@v4
+        with:
+          context: .
+          file: ./build/docker/openim-rpc-user/Dockerfile
+          platforms: linux/amd64,linux/arm64
+          push: ${{ github.event_name != 'pull_request' }}
+          tags: ${{ steps.meta13.outputs.tags }}
+          labels: ${{ steps.meta13.outputs.labels }}
+          cache-from: type=local,src=/tmp/.buildx-cache
+          cache-to: type=local,dest=/tmp/.buildx-cache

.github/workflows/e2e-test.bak

@@ -1,159 +0,0 @@
-# Copyright © 2023 OpenIM. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-name: OpenIM E2E And API Test
-
-on:
-  workflow_dispatch:
-  pull_request:
-  push:
-  schedule:
-    # run e2e test every 4 hours
-    - cron: 0 */4 * * *
-
-env:
-  CALLBACK_ENABLE: true
-
-jobs:
-  build:
-    name: Test
-    runs-on: ubuntu-latest
-    env:
-      GO111MODULE: on
-    steps:
-
-      - name: Set up Go 1.21
-        uses: actions/setup-go@v5
-        with:
-          go-version: 1.21
-        id: go
-
-      - name: Check out code into the Go module directory
-        uses: actions/checkout@v4
-
-      - name: Create e2e test
-        run: |
-          echo "...test e2e"
-
-  execute-linux-systemd-scripts:
-    name: Execute OpenIM script on ${{ matrix.os }}
-    runs-on: ${{ matrix.os }}
-    environment:
-      name: openim
-    strategy:
-      matrix:
-        go_version: ["1.20"]
-        os: ["ubuntu-latest"]
-    steps:
-    - name: Checkout code
-      uses: actions/checkout@v4
-
-    - name: Set up Go ${{ matrix.go_version }}
-      uses: actions/setup-go@v5
-      with:
-        go-version: ${{ matrix.go_version }}
-      id: go
-
-    - name: Install Task
-      uses: arduino/setup-task@v1
-      with:
-        version: '3.x' # If available, use the latest major version that's compatible
-        repo-token: ${{ secrets.GITHUB_TOKEN }}
-
-    - name: Docker Operations
-      run: |
-        sudo docker compose up -d
-        sudo bash bootstrap.sh
-        sudo mage
-        sudo sleep 20
-
-    - name: Module Operations
-      run: |
-        echo "===========> Verifying go-gitlint is installed"
-        if [ ! -f ./_output/tools/go-gitlint ]; then
-          export GOBIN=$(pwd)/_output/tools
-          echo "===========> Installing The default installation path is /home/ubuntu/DF/open-im-server/_output/tools/go-gitlint"
-          sudo go install github.com/marmotedu/go-gitlint/cmd/go-gitlint@latest
-          echo "===========> go-gitlint is installed in /home/ubuntu/DF/open-im-server/_output/tools/go-gitlint"
-        fi
-
-    - name: Build, Start(make build && make start)
-      run: |
-        sudo ./scripts/install/install.sh -i
-
-    - name: Exec OpenIM System Status Chack
-      run: |
-        sudo ./scripts/install/install.sh -s
-
-#    - name: Exec OpenIM API test (make test-api)
-    - name: Exec OpenIM test (make test)
-      run: |
-        mkdir -p ./tmp
-        touch ./tmp/test.md
-        echo "# OpenIM Test" >> ./tmp/test.md
-        echo "## OpenIM API Test" >> ./tmp/test.md
-        echo "<details><summary>Command Output for OpenIM API Test</summary>" >> ./tmp/test.md
-        echo "<pre><code>" >> ./tmp/test.md
-        echo "===========> Run api test"
-        ./scripts/install/test.sh
-        echo "===========> Run api test" >> ./tmp/test.md
-        ./scripts/install/test.sh >> ./tmp/test.md
-        echo "</code></pre>" >> ./tmp/test.md
-        echo "</details>" >> ./tmp/test.md
-
-        echo "===========> Run api test"
-        ./scripts/install/test.sh
-
- #   - name: Exec OpenIM E2E Test (make test-e2e)
- #     run: |
- #       echo "" >> ./tmp/test.md
- #       echo "## OpenIM E2E Test" >> ./tmp/test.md
- #       echo "<details><summary>Command Output for OpenIM E2E Test</summary>" >> ./tmp/test.md
- #       echo "<pre><code>" >> ./tmp/test.md
- #       sudo make test-e2e | tee -a ./tmp/test.md
- #       echo "</code></pre>" >> ./tmp/test.md
- #       echo "</details>" >> ./tmp/test.md
-
- #       sudo make test-e2e
-
-    - name: Comment PR with file
-      uses: thollander/actions-comment-pull-request@v2
-      with:
-        filePath: ./tmp/test.md
-        comment_tag: nrt_file
-        reactions: eyes, rocket
-        mode: recreate
-        GITHUB_TOKEN: ${{ secrets.BOT_GITHUB_TOKEN }}
-      continue-on-error: true
-
-    - name: Check outputs
-      run: |
-        echo "id : ${{ steps.nrt_message.outputs.id }}"
-        echo "body : ${{ steps.nrt_message.outputs.body }}"
-        echo "html_url : ${{ steps.nrt_message.outputs.html_url }}"
-
-    - name: Exec OpenIM System uninstall
-      run: |
-        sudo ./scripts/install/install.sh -u
-
-    - name: gobenchdata publish
-      uses: bobheadxi/gobenchdata@v1
-      with:
-        PRUNE_COUNT: 30
-        GO_TEST_FLAGS: -cpu 1,2
-        PUBLISH: true
-        PUBLISH_BRANCH: gh-pages
-      env:
-        GITHUB_TOKEN: ${{ secrets.BOT_GITHUB_TOKEN }}
-      continue-on-error: true

.github/workflows/e2e-test.yml

@@ -12,6 +12,5 @@
 # See the License for the specific language governing permissions and
 # limitations under the License.
 
-name: openim-api
-description: "This is a description for openim-api"
-type: "service"
+# name: OpenIM e2e Test
+

.github/workflows/golangci-lint.yml

@@ -18,41 +18,34 @@ on:
   push:
     branches: [main]
   pull_request:
+    branches: [main]
 jobs:
     golangci:
       name: lint
       runs-on: ubuntu-latest
       steps:
-        - uses: actions/checkout@v4
-        - uses: actions/setup-go@v5
+        - uses: actions/checkout@v3
+        - uses: actions/setup-go@v4
           with:
-            go-version: '1.21'
+            go-version: '1.20'
             cache: false
-        - name: OpenIM Scripts Verification(make verify)
-          run: |
-            cd scripts
-            for script in verify-*; do
-              if [ -x "$script" ]; then
-                ./"$script"
-              fi
-            done
         - name: golangci-lint
-          uses: golangci/golangci-lint-action@v4.0.0
+          uses: golangci/golangci-lint-action@v3
           with:
             # Require: version of golangci-lint to use in form of v1.2 or v1.2.3 or `latest` to use the latest version
-            version: v1.54
+            version: v1.53
 
             # Optional: working directory, useful for monorepos
-            # working-directory: server
+            working-directory: server
 
             # Optional: golangci-lint command line arguments.
             # 
             # Note: by default the `.golangci.yml` file should be at the root of the repository.
             # The location of the configuration file can be changed by using `--config=`
-            # args: --timeout=30m --config=/scripts/.golangci.yml --issues-exit-code=0
+            # args: --timeout=30m --config=/my/path/.golangci.yml --issues-exit-code=0
 
             # Optional: show only new issues if it's a pull request. The default value is `false`.
-            only-new-issues: true
+            # only-new-issues: true
 
             # Optional:The mode to install golangci-lint. It can be 'binary' or 'goinstall'.
-            # install-mode: "goinstall"
+            install-mode: "goinstall"

.github/workflows/gosec.yml

@@ -37,7 +37,7 @@ jobs:
       GO111MODULE: on
     steps:
       - name: Check out code
-        uses: actions/checkout@v4
+        uses: actions/checkout@v3
       - name: Run Gosec Security Scanner
         uses: securego/gosec@master
         with:

.github/workflows/greetings.yml

@@ -1,49 +0,0 @@
-# Copyright © 2023 OpenIM. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-name: OpenIM First Interaction
-
-on:
-  issues:
-    types: [opened]
-  pull_request:
-    branches: [main]
-    types: [opened]
-
-jobs:
-  check_for_first_interaction:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v4
-      - uses: actions/first-interaction@v1.3.0
-        with:
-          repo-token: ${{ secrets.BOT_GITHUB_TOKEN }}
-          pr-message: |
-            Hello! Thank you for your contribution.
-            
-            If you are fixing a bug, please reference the issue number in the description.
-
-            If you are implementing a feature request, please check with the maintainers that the feature will be accepted first.
-
-            [Join slack 🤖](https://join.slack.com/t/openimsdk/shared_invite/zt-22720d66b-o_FvKxMTGXtcnnnHiMqe9Q) to connect and communicate with our developers.
-
-            Please leave your information in the [✨ discussions](https://github.com/orgs/OpenIMSDK/discussions/426), we expect anyone to join OpenIM developer community.
-
-          issue-message: |
-            Hello! Thank you for filing an issue.
-
-            If this is a bug report, please include relevant logs to help us debug the problem.
-            
-            [Join slack 🤖](https://join.slack.com/t/openimsdk/shared_invite/zt-22720d66b-o_FvKxMTGXtcnnnHiMqe9Q) to connect and communicate with our developers.
-        continue-on-error: true

.github/workflows/help-comment-issue.yml

@@ -17,7 +17,6 @@ on:
   issues:
     types:
       - labeled
-
 jobs:
   add-comment:
     if: github.event.label.name == 'help wanted' || github.event.label.name == 'good first issue'
@@ -26,11 +25,11 @@ jobs:
       issues: write
     steps:
       - name: Add comment
-        uses: peter-evans/create-or-update-comment@v4
+        uses: peter-evans/create-or-update-comment@v3
         with:
           issue-number: ${{ github.event.issue.number }}
           token: ${{ secrets.BOT_GITHUB_TOKEN }}
           body: |
             This issue is available for anyone to work on. **Make sure to reference this issue in your pull request.** :sparkles: Thank you for your contribution! :sparkles:
-            [Join slack 🤖](https://join.slack.com/t/openimsdk/shared_invite/zt-22720d66b-o_FvKxMTGXtcnnnHiMqe9Q) to connect and communicate with our developers.
-            If you wish to accept this assignment, please leave a comment in the comments section: `/accept`.🎯
+            [Join slack 🤖](https://join.slack.com/t/openimsdk/shared_invite/zt-1tmoj26uf-_FDy3dowVHBiGvLk9e5Xkg) to connect and communicate with our developers.
+            If you wish to accept this assignment, please leave a comment in the comments section: `/accept`.🎯

.github/workflows/issue-robot.yml

@@ -12,7 +12,7 @@
 # See the License for the specific language governing permissions and
 # limitations under the License.
 
-name: OpenIM Issue Aotu Translator
+name: 'issue translator'
 on:
   issue_comment:
     types: [created]

.github/workflows/link-pr.yml

@@ -0,0 +1,53 @@
+# Copyright © 2023 OpenIM open source community. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+name: Github Rebot for Link check error
+
+# Every Monday at 12:30 p.m
+on:
+  schedule:
+    - cron: '30 12 * * 1'
+
+jobs:
+  linkChecker:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v3
+
+      - name: Link Checker
+        id: lychee
+        uses: lycheeverse/lychee-action@v1.8.0
+        with:
+            # For parameter description, see https://github.com/lycheeverse/lychee#commandline-parameters
+            # Actions Link address -> https://github.com/lycheeverse/lychee-action
+            # -E, --exclude-all-private    Exclude all private IPs from checking.
+            # -i, --insecure               Proceed for server connections considered insecure (invalid TLS)
+            # -n, --no-progress            Do not show progress bar.
+            # -t, --timeout <timeout>      Website timeout in seconds from connect to response finished [default:20]
+            # --max-concurrency <max-concurrency>    Maximum number of concurrent network requests [default: 128]
+            # -a --accept <accept>                      Comma-separated list of accepted status codes for valid links
+            # docs/.vitepress/dist the site directory to check
+            # ./*.md all markdown files in the root directory
+          args: --verbose  -E -i --no-progress --exclude-path './CHANGELOG' './**/*.md'
+        env:
+          GITHUB_TOKEN: ${{secrets.GH_PAT}}
+
+      - name: Create Issue From File
+        if: env.lychee_exit_code != 0
+        uses: peter-evans/create-issue-from-file@v4
+        with:
+          title: Bug reports for links in OpenIM docs
+          content-filepath: ./lychee/out.md
+          labels: kind/documentation, triage/unresolved, report
+          token: ${{ secrets.BOT_GITHUB_TOKEN }}

.github/workflows/lock-issue.yml

@@ -30,7 +30,7 @@ jobs:
   action:
     runs-on: ubuntu-latest
     steps:
-      - uses: dessant/lock-threads@v5
+      - uses: dessant/lock-threads@v4
         with:
           github-token: ${{ secrets.BOT_GITHUB_TOKEN }}
           issue-inactive-days: '365'

.github/workflows/milestone.yml

@@ -39,9 +39,8 @@ jobs:
       statuses: none
 
     steps:
-      - uses: actions/github-script@v7 # v6
+      - uses: actions/github-script@v6 # v6
         with:
-          github-token: ${{ secrets.BOT_GITHUB_TOKEN }}
           script: |
             if (!context.payload.pull_request.merged) {
               console.log('PR was not merged, skipping.');
@@ -57,10 +56,9 @@ jobs:
               owner: context.repo.owner,
               repo: context.repo.repo,
               state: 'open',
-              sort: 'title',
-              direction: 'desc'
+              sort: 'due_on',
+              direction: 'asc'
             })
-
             if (milestones.data.length === 0) {
               console.log('There are no milestones, skipping.');
               return;

.github/workflows/opencommit.yml

@@ -12,13 +12,12 @@
 # See the License for the specific language governing permissions and
 # limitations under the License.
 
-name: OpenIM OpenCommit Action
+name: 'OpenIM Commit Action'
 
 on:
   push:
-    # this list of branches is often enough,
-    # but you may still ignore other public branches
-    branches-ignore: [main master dev development release]
+    branches:
+      - main
 
 jobs:
   opencommit:
@@ -28,20 +27,20 @@ jobs:
     permissions: write-all
     steps:
       - name: Setup Node.js Environment
-        uses: actions/setup-node@v4
+        uses: actions/setup-node@v3
         with:
           node-version: '16'
-      - uses: actions/checkout@v4
+      - uses: actions/checkout@v3
         with:
           fetch-depth: 0
       - uses: di-sukharev/opencommit@github-action-v1.0.4
         with:
-          GITHUB_TOKEN: ${{ secrets.BOT_GITHUB_TOKEN }}
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
 
         env:
           # set openAI api key in repo actions secrets,
           # for openAI keys go to: https://platform.openai.com/account/api-keys
-          # for repo secret go to: <your_repo_url>/settings/secrets/actions
+          # for repo secret go to: https://github.com/kuebcub/settings/secrets/actions
           OCO_OPENAI_API_KEY: ${{ secrets.OPENAI_API_KEY }}
 
           # customization
@@ -49,7 +48,5 @@ jobs:
           OCO_OPENAI_BASE_PATH: ''
           OCO_DESCRIPTION: false
           OCO_EMOJI: false
-          OCO_MODEL: gpt-3.5-turbo-16k
-          OCO_LANGUAGE: en
-          OCO_PROMPT_MODULE: conventional-commit
-        continue-on-error: true
+          OCO_MODEL: gpt-3.5-turbo
+          OCO_LANGUAGE: en

.github/workflows/openimci.yml

@@ -1,4 +1,3 @@
-
 # Copyright © 2023 OpenIM open source community. All rights reserved.
 #
 # Licensed under the Apache License, Version 2.0 (the "License");
@@ -12,124 +11,166 @@
 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 # See the License for the specific language governing permissions and
 # limitations under the License.
-name: OpenIM CI Auto Build
+
+name: OpenIM CI Aotu Build and Install
 
 on: 
   push:
     branches:
         - main
-        - release-*
     paths-ignore:
         - "docs/**"
         - "README.md"
         - "README_zh-CN.md"
-        - "**.md"
-        - "docs/**"
         - "CONTRIBUTING.md"
   pull_request:
     branches:
         - main
-        - release-*
     paths-ignore:
         - "README.md"
         - "README_zh-CN.md"
-        - "CONTRIBUTING/**"
-        - "**.md"
+        - "CONTRIBUTING.md"
         - "docs/**"
-  workflow_dispatch:
+
+env:
+  GO_VERSION: "1.19"
+  GOLANGCI_VERSION: "v1.50.1"
 
 jobs:
-
-  build-linux:
-    name: Execute OpenIM Script On Linux
-    runs-on: ubuntu-latest
+  openim:
+    name: Test with go ${{ matrix.go_version }} on ${{ matrix.os }}
+    runs-on: ${{ matrix.os }}
     permissions:
-      contents: write
-      pull-requests: write
+        # Give the default GITHUB_TOKEN write permission to commit and push the changed files back to the repository.
+        contents: write
+    environment:
+      name: openim
+
+    strategy:
+      matrix:
+        go_version: ["1.18","1.19","1.20"]
+        os: [ubuntu-latest]
+
+    steps:
+      - name: Set up Go ${{ matrix.go_version }}
+        uses: actions/setup-go@v4
+        with:
+          go-version: ${{ matrix.go_version }}
+        id: go
+
+      - name: Check out code into the Go module directory
+        uses: actions/checkout@v3
+
+      - name: Install Task
+        uses: arduino/setup-task@v1
+        with:
+          version: 2.x
+
+      - name: Run go modules tidy
+        run: |
+          sudo make tidy
+          sudo make tools.verify.go-gitlint
+          echo "Run go modules tidy successfully" 
+
+      - name: Run go format
+        run: |
+          sudo make format
+          echo "Run go format successfully" 
+        continue-on-error: true
+
+      - name: Generate all necessary files, such as error code files
+        run: |
+          make generate
+          echo "Generate all necessary files successfully" 
+        continue-on-error: true
+
+      - name: Run unit test and get test coverage
+        run: |
+          make cover
+          echo "Run unit test and get test coverage successfully" 
+        continue-on-error: true
+
+      - name: Build source code for host platform
+        run: |
+          sudo make build
+          echo "Build source code for host platform successfully" 
+
+      - name: OpenIM verify copyright
+        run: |
+          sudo make verify-copyright
+          sudo make add-copyright
+          echo "OpenIM verify successfully" 
+        continue-on-error: true
+
+      - name: Clean all build
+        run: |
+          sudo make clean
+          echo "Clean all build successfully" 
+
+      - name: push OpenIM 
+        uses: stefanzweifel/git-auto-commit-action@v4
+        with:
+          commit_message: "cicd: robot automated Change"
+        #   commit_options: '--no-verify --signoff'
+          branch: main
+        #   create_branch: true
+        #   # Optional commit user and author settings
+        #   commit_user_name: kubbot # defaults to "github-actions[bot]"
+        #   commit_user_email: 3293172751ysy@gmail.com # defaults to "41898282+github-actions[bot]@users.noreply.github.com"
+        #   commit_author: Kubbot # defaults to author of the commit that triggered the run
+        continue-on-error: true
+
+      - name: Commit Changes
+        uses: stefanzweifel/git-auto-commit-action@v4
+        with:
+          commit_message: "chore(fmt): robot automated format and lint Change"
+          commit_options: '--no-verify --signoff'
+          branch: main
+        continue-on-error: true
+
+      - name: Set Current Directory
+        id: set_directory
+        run: |
+          echo "::set-output name=directory::$(pwd)"
+        continue-on-error: true
+
+      - name: Collect Test Coverage File
+        id: collect_coverage
+        run: |
+          cd ${{ steps.set_directory.outputs.directory }}
+          make cover
+          echo "::set-output name=coverage_file::./_output/tmp/coverage.out"
+        continue-on-error: true
+
+      - name: Display Test Coverage
+        run: |
+          echo "Test Coverage:"
+          cat ${{ steps.collect_coverage.outputs.coverage_file }}
+        continue-on-error: true
+
+      - name: Set up Docker Buildx
+        uses: docker/setup-buildx-action@v2
+        continue-on-error: true
+
+  openim-start:
+    name: Teat OpenIM make install start on ${{ matrix.os }}
+    runs-on: ${{ matrix.os }}
     environment:
       name: openim
     strategy:
       matrix:
-        arch: [arm64, armv7, amd64]
-    
+        go_version: ["1.20"]
+        os: ["ubuntu-latest"]
     steps:
-    - uses: actions/checkout@v3
+      - name: Set up Go ${{ matrix.go_version }}
+        uses: actions/setup-go@v4
+        with:
+          go-version: ${{ matrix.go_version }}
+        id: go
 
-    - name: Set up Go
-      uses: actions/setup-go@v4
-      with:
-        go-version: '1.21'
+      - name: Check out code into the Go module directory
+        uses: actions/checkout@v3
 
-    - name: Set up Docker for Linux
-      run: |
-        sudo docker compose up -d
-        sudo sleep 30  # Increased sleep time for better stability
-      timeout-minutes: 20  # Increased timeout for Docker setup
-
-
-    - name: init
-      run: sudo bash bootstrap.sh
-      timeout-minutes: 20
-
-    - name: Get Internal IP Address
-      id: get-ip
-      run: |
-        IP=$(hostname -I | awk '{print $1}')
-        echo "The IP Address is: $IP"
-        echo "::set-output name=ip::$IP"
-      
-    - name: Update .env
-      run: |
-        sed -i 's|externalAddress:.*|externalAddress: "http://${{ steps.get-ip.outputs.ip }}:10005"|' config/minio.yml
-        cat config/minio.yml
-
-    - name: Build, Start, Check Services and Print Logs for Linux
-      run: |
-        sudo mage
-        sudo mage start
-        sudo mage check
-        
-
-    - name: Restart Services and Print Logs
-      run: |
-        sudo mage stop
-        sudo mage start
-        sudo mage check
-
-    - name: Checkout chat repository
-      uses: actions/checkout@v4
-      with:
-        repository: 'openimsdk/chat'
-        path: 'chat-repo'
-
-    - name: Build and Start Chat Services
-      run: |
-        cd ${{ github.workspace }}/chat-repo
-        sudo mage
-        sudo mage start
-        sudo mage check
-    
-    - name: Checkout e2e repository
-      uses: actions/checkout@v4
-      with:
-          repository: "openimsdk/test-e2e"
-          path: e2e-repo
-
-    - name: Set up Python 3.9
-      uses: actions/setup-python@v4
-      with:
-        python-version: '3.9'
-    
-    - name: Install dependencies
-      run: |
-        sudo apt-get update
-        sudo apt-get install -y xvfb libxi6 libgconf-2-4
-        cd ${{ github.workspace }}/e2e-repo
-        pip install -r requirements.txt
-    
-    - name: Run tests
-      run: |
-        cd ${{ github.workspace }}/e2e-repo
-        xvfb-run --auto-servernum --server-args='-screen 0 1920x1080x24' pytest -v -s ./script
-    
-    
+      - name: Run OpenIM make install start
+        run: |
+          sudo make install

.github/workflows/project-progress.yml

@@ -24,16 +24,13 @@ on:
   pull_request:
     types: 
       - assigned
-    branches-ignore:
-      - 'asf-auto-updates'
-      - 'ignore'
 
 jobs:
   move-assigned-card:
     runs-on: ubuntu-latest
     steps:
-      - uses: alex-page/github-project-automation-plus@v0.9.0
+      - uses: alex-page/github-project-automation-plus@v0.8.3
         with:
-          project: openim-powerful
+          project: OpenIM-V3.1
           column: In Progress
-          repo-token: ${{ secrets.BOT_GITHUB_TOKEN }}
+          repo-token: ${{ secrets.BOT_GITHUB_TOKEN }}

.github/workflows/pull-request.bak

@@ -1,130 +0,0 @@
-# Copyright © 2023 OpenIM. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-name: Github Pull Request
-on:
-  workflow_dispatch:
-  schedule:
-    - cron: '0 2 * * *'
-
-permissions:
-  contents: write
-  pull-requests: write
-
-jobs:
-  build:
-    runs-on: ubuntu-latest
-    steps:
-      - name: checkout
-        uses: actions/checkout@v4
-        with:
-          fetch-depth: 0
-
-      - uses: actions/setup-node@v4
-      - name: Setup Go
-        uses: actions/setup-go@v5
-      - name: Run go modules tidy
-        run: |
-          sudo apt-get install jq
-          sudo make tidy
-          sudo make tools.verify.go-gitlint
-          echo "Run go modules tidy successfully" 
-        continue-on-error: true
-
-      - name: Run go format and lint
-        run: |
-          sudo make format
-          echo "Run go format successfully" 
-        continue-on-error: true
-
-      - name: Run go lint
-        run: |
-          sudo make lint
-          echo "Run go lint successfully" 
-        continue-on-error: true
-
-      - name: Generate all necessary files, such as error code files
-        run: |
-          make gen.docgo.doc
-          make gen
-          echo "Generate all necessary files successfully"
-        continue-on-error: true
-
-      - name: make init
-        run: |
-          export OPENIM_IP=127.0.0.1
-          export LOG_STORAGE_LOCATION="../logs/"
-          ./scripts/init-config.sh --examples --force
-          echo "Generate all necessary files successfully"
-        continue-on-error: true
-
-      - name: Generate Versions Including Pre-release Identifiers
-        run: |
-          latest_tag=$(git describe --tags `git rev-list --tags --max-count=1`)
-          echo $latest_tag > pkg/common/config/version
-        continue-on-error: true
-
-      - name: Gen CHANGELOG file
-        run: |
-          current_tag=$(git describe --tags --abbrev=0)
-          version=$(echo "$current_tag" | sed -E 's/^v?([0-9]+)\.([0-9]+)\..*$/\1.\2/')
-          echo "OpenIM Version: $version"
-          make tools.install.git-chglog
-          cd CHANGELOG
-          git-chglog --tag-filter-pattern "v${version}.*" -o CHANGELOG-${version}.md
-          cd ..
-        continue-on-error: true
-
-      - name: Run unit test and get test coverage
-        run: |
-          make cover
-          echo "Run unit test and get test coverage successfully" 
-        continue-on-error: true
-
-      - name: OpenIM verify copyright
-        run: |
-          sudo make add-copyright
-          echo "OpenIM verify successfully" 
-        continue-on-error: true
-
-      - name: Create Pull Request
-        uses: peter-evans/create-pull-request@v6
-        with:
-          token: ${{ secrets.BOT_GITHUB_TOKEN }}
-          commit-message: "cicd: bump League Patch"
-          author: kubbot <3293172751ysy@gmail.com>
-          committer: kubbot <3293172751ysy@gmail.com>
-        #   signoff: false
-        #   draft: false
-          branch: "asf-auto-updates"
-          assignees: cubxxw
-          reviewers: cubxxw
-          title: "[Auto PR 🤖] Bump League Patch auto PR"
-          body: |
-            I am a PR generated by robot automation.
-
-            Review criteria:
-
-            - [ ] Disenchanter can connect and issue actions
-
-            Github Actions Status:
-
-            [![Github Pull Request](https://github.com/openimsdk/open-im-server/actions/workflows/pull-request.yml/badge.svg)](https://github.com/openimsdk/open-im-server/actions/workflows/pull-request.yml)
-            
-            This is an automated PR. 
-            <sub>[workflow](https://github.com/openimsdk/open-im-server/blob/main/.github/workflows/pull-request.yml).</sub>
-          labels: |
-            kind/documentation
-            enhancement
-            report

.github/workflows/pull-request.yml

@@ -0,0 +1,114 @@
+# Copyright © 2023 OpenIM. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+name: Github Pull Request
+on:
+  push:
+    branches: [main]
+    paths-ignore:
+      - 'README.md'
+      - 'CONTRIBUTING.md'
+      - 'docs/**'
+  pull_request:
+    branches: [main]
+    paths-ignore:
+      - 'README.md'
+      - 'CONTRIBUTING.md'
+      - 'docs/**'
+
+permissions:
+  pull-requests: write
+  contents: write
+
+jobs:
+  build:
+    runs-on: ubuntu-latest
+    steps:
+      - name: checkout
+        uses: actions/checkout@v3
+        with:
+          fetch-depth: 0
+
+      - name: Get League branch Patch
+        run: |
+          git config user.name 'openimbot'
+          git config user.email 'openimsdk@qq.com'
+          git checkout -b cicd/patch-${{ github.event.number }}
+      - uses: actions/setup-node@v3
+      - name: Setup Go
+        uses: actions/setup-go@v4
+      - name: Run go modules tidy
+        run: |
+          sudo make tidy
+          sudo make tools.verify.go-gitlint
+          echo "Run go modules tidy successfully" 
+
+      - name: Run go format
+        run: |
+          sudo make format
+          echo "Run go format successfully" 
+        continue-on-error: true
+
+      - name: Generate all necessary files, such as error code files
+        run: |
+          make generate
+          echo "Generate all necessary files successfully" 
+        continue-on-error: true
+
+      - name: Run unit test and get test coverage
+        run: |
+          make cover
+          echo "Run unit test and get test coverage successfully" 
+        continue-on-error: true
+
+      - name: Initialize CodeQL
+        uses: github/codeql-action/init@v2
+        with:
+          languages: go
+
+      - name: Build source code for host platform
+        run: |
+          sudo make build
+          echo "Build source code for host platform successfully" 
+
+      - name: Perform CodeQL Analysis
+        uses: github/codeql-action/analyze@v2
+
+      - name: OpenIM verify copyright
+        run: |
+          sudo make verify-copyright
+          sudo make add-copyright
+          echo "OpenIM verify successfully" 
+        continue-on-error: true
+      
+      - name: Commit code
+        run: |
+            git add .
+    
+      - name: Create Pull Request
+        uses: peter-evans/create-pull-request@v5
+        with:
+          commit-message: "cicd: bump League Patch to cicd/patch-${{ github.event.number }}"
+          title: Bump League Patch to cicd/patch-${{ github.event.number }}
+          body: |
+            Review criteria:
+            
+            - [ ] Disenchanter can connect and issue actions
+            
+            This is an automated PR.
+            <sub>[workflow](https://github.com/OpenIMSDK/Open-IM-Server/blob/main/.github/workflows/pull-request.yml).</sub>
+          base: main
+          branch: cicd/patch-${{ github.event.number }}
+          labels: kind/documentation, area/test, ok-to-test
+          token: ${{ secrets.REDBOT_GITHUB_TOKEN }}

.github/workflows/release-drafter.yml

@@ -1,55 +0,0 @@
-# Copyright © 2023 OpenIM. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-name: Release Drafter
-
-on:
-  push:
-    # branches to consider in the event; optional, defaults to all
-    branches:
-      - main
-  # pull_request event is required only for autolabeler
-  pull_request:
-    # Only following types are handled by the action, but one can default to all as well
-    # types: [opened, reopened, synchronize]
-  # pull_request_target event is required for autolabeler to support PRs from forks
-  # pull_request_target:
-  #   types: [opened, reopened, synchronize]
-
-permissions:
-  contents: read
-
-jobs:
-  update_release_draft:
-    permissions:
-      # write permission is required to create a github release
-      contents: write
-      # write permission is required for autolabeler
-      # otherwise, read permission is required at least
-      pull-requests: write
-    runs-on: ubuntu-latest
-    steps:
-      # (Optional) GitHub Enterprise requires GHE_HOST variable set
-      #- name: Set GHE_HOST
-      #  run: |
-      #    echo "GHE_HOST=${GITHUB_SERVER_URL##https:\/\/}" >> $GITHUB_ENV
-
-      # Drafts your next Release notes as Pull Requests are merged into "master"
-      - uses: release-drafter/release-drafter@v6
-        # (Optional) specify config name to use, relative to .github/. Default: release-drafter.yml
-        # with:
-        #   config-name: my-config.yml
-        #   disable-autolabeler: true
-        env:
-          GITHUB_TOKEN: ${{ secrets.REDBOT_GITHUB_TOKEN }}

.github/workflows/release.yml

@@ -12,7 +12,7 @@
 # See the License for the specific language governing permissions and
 # limitations under the License.
 
-name: OpenIM Server Release Workflow
+name: OpenIM Server Release
 
 on:
   push:
@@ -29,26 +29,23 @@ jobs:
   goreleaser:
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v4
+      - uses: actions/checkout@v3
         with:
           fetch-depth: 0
       - run: git fetch --force --tags
-      - uses: actions/setup-go@v5
+      - uses: actions/setup-go@v4
         with:
           go-version: stable
       # More assembly might be required: Docker logins, GPG, etc. It all depends
       # on your needs.
-      - uses: goreleaser/goreleaser-action@v5
+      - uses: goreleaser/goreleaser-action@v4
         with:
           # either 'goreleaser' (default) or 'goreleaser-pro':
           distribution: goreleaser
           version: latest
-          workdir: .
-          args: release -f ./build/goreleaser.yaml --clean --release-footer-tmpl=scripts/template/footer.md.tmpl --release-header-tmpl=scripts/template/head.md.tmpl
+          args: release --clean
         env:
-          USERNAME: ${{ github.repository_owner }}
           GITHUB_TOKEN: ${{ secrets.BOT_GITHUB_TOKEN }}
-          FURY_TOKEN: ${{ secrets.FURY_TOKEN }}
           # Your GoReleaser Pro key, if you are using the 'goreleaser-pro'
           # distribution:
           # GORELEASER_KEY: ${{ secrets.GORELEASER_KEY }}
@@ -63,19 +60,19 @@ jobs:
       matrix:
         format: [ deb, rpm, apk ]
     steps:
-      - uses: actions/checkout@v4 # v3
+      - uses: actions/checkout@v3 # v3
         with:
           fetch-depth: 0
       - uses: arduino/setup-task@e26d8975574116b0097a1161e0fe16ba75d84c1c # v1
         with:
           version: 3.x
           repo-token: ${{ secrets.GITHUB_TOKEN }}
-      - uses: docker/setup-qemu-action@326560df218a7ea9cf6ab49bbc88b8b306bb437e # v2
-      - uses: actions/cache@a2ed59d39b352305bdd2f628719a53b2cc4f9613 # v3
+      - uses: docker/setup-qemu-action@2b82ce82d56a2a04d2637cd93a637ae1b359c0a7 # v2
+      - uses: actions/cache@88522ab9f39a2ea568f7027eddc7d8d8bc9d59c8 # v3
         with:
           path: |
             ./_output/dist/*.deb
             ./_output/dist/*.rpm
             ./_output/dist/*.apk
           key: ${{ github.ref }}
-      - run: task goreleaser:test:${{ matrix.format }}
+      - run: task goreleaser:test:${{ matrix.format }}

.github/workflows/scripts-test.yml

@@ -0,0 +1,89 @@
+# Copyright © 2023 OpenIM. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+name: OpenIM Start Execute Scripts
+
+on: 
+    push:
+      branches:
+          - main
+      paths-ignore:
+          - "docs/**"
+          - "README.md"
+          - "README_zh-CN.md"
+          - "CONTRIBUTING.md"
+    pull_request:
+      branches:
+          - main
+      paths-ignore:
+          - "README.md"
+          - "README_zh-CN.md"
+          - "CONTRIBUTING.md"
+          - "docs/**"
+
+jobs:
+  execute-scripts:
+    runs-on: ubuntu-latest
+
+    steps:
+    - name: Checkout code
+      uses: actions/checkout@v3
+
+    - name: Download Docker Compose
+      run: |
+        curl -o docker-compose.yaml https://gist.githubusercontent.com/cubxxw/b1d5cbd2edfa23fee911118aa3e8249e/raw/openim-server.sh
+      shell: bash
+
+    - name: Start Docker Compose
+      run: |
+        sudo docker compose up -d
+        sudo sleep 60
+      continue-on-error: true
+
+    - name: Stop all services
+      run: |
+        sudo chmod +x ./scripts/stop_all.sh
+        sudo ./scripts/stop_all.sh
+        sudo cat logs/openIM.log 2>/dev/null
+      shell: bash
+      continue-on-error: true
+
+    - name: Build all services
+      run: |
+        sudo chmod +x ./scripts/build_all_service.sh
+        sudo ./scripts/build_all_service.sh
+        sudo cat logs/openIM.log 2>/dev/null
+      shell: bash
+
+    - name: Start all services
+      run: |
+        sudo chmod +x ./scripts/start_all.sh
+        sudo ./scripts/start_all.sh
+        sudo cat logs/openIM.log 2>/dev/null
+      continue-on-error: true
+      shell: bash
+
+    - name: Check all services
+      run: |
+        sudo chmod +x ./scripts/check_all.sh
+        sudo ./scripts/check_all.sh
+        sudo cat logs/openIM.log 2>/dev/null
+      shell: bash
+
+    - name: Print openIM.log
+      run: |
+        sudo cat logs/* 2>/dev/null
+        sudo cat logs/* 2>/dev/null >> "$GITHUB_OUTPUT"
+      shell: bash
+      continue-on-error: true

.github/workflows/stale.yml

@@ -0,0 +1,48 @@
+# Copyright © 2023 OpenIM. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# This workflow warns and then closes issues and PRs that have had no activity for a specified amount of time.
+#
+# You can adjust the behavior by modifying this file.
+# For more information, see:
+# https://github.com/actions/stale
+name: Mark stale issues and pull requests
+
+on:
+  schedule:
+  - cron: '0 8 * * *'
+
+jobs:
+  stale:
+
+    runs-on: ubuntu-latest
+    permissions:
+      issues: write
+      pull-requests: write
+
+    steps:
+    - uses: actions/stale@v8
+      with:
+        repo-token: ${{ secrets.BOT_GITHUB_TOKEN }}
+        days-before-stale: 60
+        days-before-close: 7
+        stale-issue-message: 'This issue is stale because it has been open 60 days with no activity. Remove stale label or comment or this will be closed in 7 days.'
+        stale-pr-message: 'This issue is stale because it has been open 60 days with no activity.'
+        close-issue-message: 'This issue was closed because it has been stalled for 7 days with no activity.'
+        close-pr-message: 'This PR was closed because it has been stalled for 7 days with no activity. You can reopen it if you want.'
+        stale-pr-label: lifecycle/stale
+        stale-issue-label: lifecycle/stale
+        exempt-issue-labels: 'openim'
+        exempt-pr-labels: 'openim'
+        exempt-draft-pr: true

.github/workflows/sync-release.bak

@@ -1,44 +0,0 @@
-# Copyright © 2023 KubeCub open source community. All rights reserved.
-# Licensed under the MIT License (the "License");
-# you may not use this file except in compliance with the License.
-
-# https://github.com/BetaHuhn/repo-file-sync-action
-name: Synchronize OpenIM Release Branch Public Code To Other Repositories
-on:
-    push:
-        paths:
-            - scripts/*
-            - docs/*
-            - config/*
-        branches:
-          - release-v*.*
-    workflow_dispatch:
-
-jobs:
-  sync:
-    runs-on: ubuntu-latest
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v4
-
-      - name: Run GitHub File Sync
-        uses: BetaHuhn/repo-file-sync-action@latest
-        with:
-          GH_INSTALLATION_TOKEN: "${{ secrets.BOT_GITHUB_TOKEN }}"
-          CONFIG_PATH: .github/sync-release.yml
-          ORIGINAL_MESSAGE: true
-          SKIP_PR: true
-          COMMIT_EACH_FILE: false
-          COMMIT_BODY: "🤖 kubbot to synchronize the warehouse"
-          GIT_EMAIL: "3293172751ysy@gmail.com"
-          GIT_USERNAME: "kubbot"
-          PR_BODY: 👌 kubecub provides automated community services
-          REVIEWERS: |
-            kubbot
-            cubxxw
-          PR_LABELS: |
-            file-sync
-            automerge
-          ASSIGNEES: |
-            kubbot
-        continue-on-error: true

.github/workflows/sync.yml

@@ -3,7 +3,7 @@
 # you may not use this file except in compliance with the License.
 
 # https://github.com/BetaHuhn/repo-file-sync-action
-name: Synchronize OpenIM Main Branch Public Code To Other Repositories
+name: Synchronize kubecub public code to other repositories
 on:
     push:
         branches:
@@ -15,7 +15,7 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Checkout
-        uses: actions/checkout@v4
+        uses: actions/checkout@v3
 
       - name: Run GitHub File Sync
         uses: BetaHuhn/repo-file-sync-action@latest
@@ -36,5 +36,4 @@ jobs:
             file-sync
             automerge
           ASSIGNEES: |
-            kubbot
-        continue-on-error: true
+            kubbot

.gitignore

@@ -29,15 +29,20 @@ tmp/
 bin/
 output/
 _output/
-deployments/charts/generated-configs/
-
-### OpenIM Config ###
-.env
-config/config.yaml
-config/notification.yaml
 
 ### OpenIM deploy ###
-deployments/openim-server/charts
+deploy/openim_demo
+deploy/openim-api
+deploy/openim-rpc-msg_gateway
+deploy/openim-msgtransfer
+deploy/openim-push
+deploy/openim_timer_task
+deploy/openim-rpc-user
+deploy/openim-rpc-friend
+deploy/openim-rpc-group
+deploy/openim-rpc-msg
+deploy/openim-rpc-auth
+deploy/Open-IM-SDK-Core
 
 # files used by the developer
 .idea.md
@@ -148,11 +153,10 @@ flycheck_*.el
 *.out
 
 # Dependency directories (remove the comment below to include it)
-vendor/
+# vendor/
 
 # Go workspace file
-# go.work
-go.work.sum
+go.work
 
 ### JetBrains ###
 # Covers JetBrains IDEs: IntelliJ, RubyMine, PhpStorm, AppCode, PyCharm, CLion, Android Studio, WebStorm and Rider
@@ -387,4 +391,4 @@ Sessionx.vim
 
 # End of https://www.toptal.com/developers/gitignore/api/go,git,vim,tags,test,emacs,backup,jetbrains
 .idea
-dist/
+dist/

.golangci.yml

@@ -39,19 +39,15 @@ run:
   # from this option's value (see skip-dirs-use-default).
   # "/" will be replaced by current OS file path separator to properly work
   # on Windows.
-  # skip-dirs:
-  #   - components
-  #   - docs
-  #   - util
-  #   - .*~
-  #   - api/swagger/docs
-  #   - server/docs
-  #   - components/mnt/config/certs
-  #   - logs
+  skip-dirs:
+    - util
+    - .*~
+    - api/swagger/docs
+    - server/docs
 
   # default is true. Enables skipping of directories:
   #   vendor$, third_party$, testdata$, examples$, Godeps$, builtin$
-  # skip-dirs-use-default: true
+  skip-dirs-use-default: true
 
   # which files to skip: they will be analyzed, but issues from them
   # won't be reported. Default value is empty list, but there is
@@ -59,15 +55,10 @@ run:
   # autogenerated files. If it's not please let us know.
   # "/" will be replaced by current OS file path separator to properly work
   # on Windows.
-  # skip-files:
-  #   - ".*\\.my\\.go$"
-  #   - _test.go
-  #   - ".*_test.go"
-  #   - "mocks/"
-  #   - ".github/"
-  #   - "logs/"
-  #   - "_output/"
-  #   - "components/"
+  skip-files:
+    - ".*\\.my\\.go$"
+    - _test.go
+    - ".*\\.pb\\.go"
 
   # by default isn't set. If set we pass it to "go list -mod={option}". From "go help modules":
   # If invoked with -mod=readonly, the go command is disallowed from the implicit
@@ -87,7 +78,7 @@ run:
 # output configuration options
 output:
   # colored-line-number|line-number|json|tab|checkstyle|code-climate, default is "colored-line-number"
-  # format: colored-line-number
+  format: colored-line-number
 
   # print lines of code with issue, default is true
   print-issued-lines: true
@@ -118,7 +109,9 @@ linters-settings:
     right-to-left-isolate: true
     first-strong-isolate: true
     pop-directional-isolate: true
-
+  dogsled:
+    # checks assignments with too many blank identifiers; default is 2
+    max-blank-identifiers: 2
   dupl:
     # tokens count to trigger issue, 150 by default
     threshold: 200
@@ -139,8 +132,8 @@ linters-settings:
 
     # path to a file containing a list of functions to exclude from checking
     # see https://github.com/kisielk/errcheck#excluding-functions for details
-    # exclude: errcheck.txt
-
+    #exclude: errcheck.txt
+    
   errorlint:
     # Check whether fmt.Errorf uses the %w verb for formatting errors. See the readme for caveats
     errorf: true
@@ -150,11 +143,6 @@ linters-settings:
     comparison: true
 
   exhaustive:
-    # Program elements to check for exhaustiveness.
-    # Default: [ switch ]
-    check:
-      - switch
-      - map
     # check switch statements in generated files also
     check-generated: false
     # indicates that switch statements are to be considered exhaustive if a
@@ -166,34 +154,33 @@ linters-settings:
     ignore-enum-members: ""
     # consider enums only in package scopes, not in inner scopes
     package-scope-only: false
+  exhaustivestruct:
+    struct-patterns:
+      - '*.Test'
+      - '*.Test2'
+      - '*.Embedded'
+      - '*.External'
 
-
-  forbidigo:
+  # forbidigo:
   #   # Forbid the following identifiers (identifiers are written using regexp):
-    forbid:
-      # - ^print.*$
-      - 'fmt\.Print.*'
-      - fmt.Println.* # too much log noise
-      - ^unsafe\..*$
-      - ^init$
-      - ^os.Exit$
-      - ^fmt.Print.*$
-      - errors.New.*$
-      - ^fmt.Println.*$
-      - ^panic$
-      - painc
+  #   forbid:
+  #     - ^print.*$
+  #     - 'fmt\.Print.*'
+  #     - fmt.Println.* # too much log noise
   #     - ginkgo\\.F.* # these are used just for local development
   #   # Exclude godoc examples from forbidigo checks.  Default is true.
   #   exclude_godoc_examples: false
-
   funlen:
-    lines: 220
-    statements: 80
-
+    lines: 150
+    statements: 50
+  gci:
+    # put imports beginning with prefix after 3rd-party packages;
+    # only support one prefix
+    # if not set, use goimports.local-prefixes
+    prefix: github.com/OpenIMSDK/OpenKF
   gocognit:
     # minimal code complexity to report, 30 by default (but we recommend 10-20)
     min-complexity: 30
-
   goconst:
     # minimal length of string constant, 3 by default
     min-len: 3
@@ -219,6 +206,9 @@ linters-settings:
     # By default list of stable checks is used.
     enabled-checks:
       #- rangeValCopy
+      - nestingreduce
+      - truncatecmp
+      - unnamedresult
       - ruleguard
 
     # Which checks should be disabled; can't be combined with 'enabled-checks'; default is empty
@@ -247,6 +237,9 @@ linters-settings:
       hugeParam:
         # size in bytes that makes the warning trigger (default 80)
         sizeThreshold: 80
+      nestingReduce:
+        # min number of statements inside a branch to trigger a warning (default 5)
+        bodyWidth: 5
       rangeExprCopy:
         # size in bytes that makes the warning trigger (default 512)
         sizeThreshold: 512
@@ -260,10 +253,15 @@ linters-settings:
       ruleguard:
         # path to a gorules file for the ruleguard checker
         rules: ''
+      truncateCmp:
+        # whether to skip int/uint/uintptr types (default true)
+        skipArchDependent: true
       underef:
         # whether to skip (*x).method() calls where x is a pointer receiver (default true)
         skipRecvDeref: true
-
+      unnamedResult:
+        # whether to check exported functions
+        checkExported: true
   gocyclo:
     # minimal code complexity to report, 30 by default (but we recommend 10-20)
     min-complexity: 30
@@ -280,12 +278,9 @@ linters-settings:
     # list of regexps for excluding particular comment lines from check
     exclude:
       # example: exclude comments which contain numbers
-      - '[0-9]+'
-      - 'func\s+\w+'
-      - 'FIXME:'
-      - '.*func.*'
+      # - '[0-9]+'
     # check that each sentence starts with a capital letter
-    capital: true
+    capital: false
   godox:
     # report any comments starting with keywords, this is useful for TODO or FIXME comments that
     # might be left in the code accidentally and should be resolved before merging
@@ -308,15 +303,15 @@ linters-settings:
     # by default
     extra-rules: false
 
-  # goheader:
-    # values:
-      # const:
+  goheader:
+    values:
+      const:
         # define here const type values in format k:v, for example:
         # COMPANY: MY COMPANY
-      # regexp:
+      regexp:
         # define here regexp type values, for example
         # AUTHOR: .*@mycompany\.com
-    # template: # |-
+    template: # |-
       # put here copyright header template for source code files, for example:
       # Note: {{ YEAR }} is a builtin value that returns the year relative to the current machine time.
       #
@@ -334,45 +329,23 @@ linters-settings:
       # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
       # See the License for the specific language governing permissions and
       # limitations under the License.
-    # template-path:
+    template-path:
       # also as alternative of directive 'template' you may put the path to file with the template source
-
   goimports:
     # put imports beginning with prefix after 3rd-party packages;
     # it's a comma-separated list of prefixes
-    local-prefixes: github.com/openimsdk/open-im-server
-
+    local-prefixes: github.com/OpenIMSDK/OpenKF
+  golint:
+    # minimal confidence for issues, default is 0.8
+    min-confidence: 0.9
   gomnd:
-    # List of enabled checks, see https://github.com/tommy-muehle/go-mnd/#checks for description.
-    # Default: ["argument", "case", "condition", "operation", "return", "assign"]
-    checks:
-      - argument
-      - case
-      - condition
-      - operation
-      - return
-      - assign
-    # List of numbers to exclude from analysis.
-    # The numbers should be written as string.
-    # Values always ignored: "1", "1.0", "0" and "0.0"
-    # Default: []
-    ignored-numbers:
-      - '0666'
-      - '0755'
-      - '42'
-    # List of file patterns to exclude from analysis.
-    # Values always ignored: `.+_test.go`
-    # Default: []
-    ignored-files:
-      - 'magic1_.+\.go$'
-    # List of function patterns to exclude from analysis.
-    # Following functions are always ignored: `time.Date`,
-    # `strconv.FormatInt`, `strconv.FormatUint`, `strconv.FormatFloat`,
-    # `strconv.ParseInt`, `strconv.ParseUint`, `strconv.ParseFloat`.
-    # Default: []
-    ignored-functions:
-      - '^math\.'
-      - '^webhook\.StatusText$'
+    settings:
+      mnd:
+        # the list of enabled checks, see https://github.com/tommy-muehle/go-mnd/#checks for description.
+        checks: argument,case,condition,operation,return,assign
+        # ignored-numbers: 1000
+        # ignored-files: magic_.*.go
+        # ignored-functions: math.*
   gomoddirectives:
     # Allow local `replace` directives. Default is false.
     replace-local: true
@@ -384,7 +357,6 @@ linters-settings:
     retract-allow-no-explanation: false
     # Forbid the use of the `exclude` directives. Default is false.
     exclude-forbidden: false
-
   gomodguard:
     allowed:
       modules:    
@@ -392,17 +364,13 @@ linters-settings:
         - gorm.io/gorm
         - gorm.io/driver/mysql
         - k8s.io/klog
-        - github.com/allowed/module
-        - go.mongodb.org/mongo-driver/mongo
         # - gopkg.in/yaml.v2
       domains:                                                        # List of allowed module domains
         - google.golang.org
         - gopkg.in
         - golang.org
         - github.com
-        - go.mongodb.org
         - go.uber.org
-        - openim.io
         - go.etcd.io
     blocked:
       versions:
@@ -448,6 +416,9 @@ linters-settings:
     checks: [ "all" ]
 
   govet:
+    # report about shadowed variables
+    check-shadowing: true
+
     # settings per analyzer
     settings:
       printf: # analyzer name, run `go tool vet help` to see all analyzers
@@ -464,25 +435,20 @@ linters-settings:
     disable:
       - shadow
     disable-all: false
-
-  depguard:
-    rules:
-      prevent_unmaintained_packages:
-        list-mode: lax # allow unless explicitely denied
-        files:
-          - $all
-          - "!$test"
-        allow:
-          - $gostd
-        deny:
-          - pkg: io/ioutil
-            desc: "replaced by io and os packages since Go 1.16: https://tip.golang.org/doc/go1.16#ioutil"
-          - pkg: github.com/OpenIMSDK
-            desc: "The OpenIM organization has been replaced with lowercase, please do not use uppercase organization name, you will use openimsdk"
-          - pkg: log
-            desc: "We have a wrapped log package at openim, we recommend you to use our wrapped log package, https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/logging.md"
-          - pkg: errors
-            desc: "We have a wrapped errors package at openim, we recommend you to use our wrapped errors package, https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/error-code.md"
+  # depguard:
+  #   list-type: blacklist
+  #   include-go-root: false
+  #   packages:
+  #     - github.com/Sirupsen/logrus
+  #   packages-with-error-message:
+  #     # specify an error message to output when a blacklisted package is used
+  #     - github.com/Sirupsen/logrus: "logging is allowed only by logutils.Log"
+  ifshort:
+    # Maximum length of variable declaration measured in number of lines, after which linter won't suggest using short syntax.
+    # Has higher priority than max-decl-chars.
+    max-decl-lines: 1
+    # Maximum length of variable declaration measured in number of characters, after which linter won't suggest using short syntax.
+    max-decl-chars: 30
 
   importas:
     # if set to `true`, force to use alias.
@@ -492,8 +458,6 @@ linters-settings:
       # using `servingv1` alias for `knative.dev/serving/pkg/apis/serving/v1` package
       - pkg: knative.dev/serving/pkg/apis/serving/v1
         alias: servingv1
-      - pkg: gopkg.in/yaml.v2
-        alias: yaml
       # using `autoscalingv1alpha1` alias for `knative.dev/serving/pkg/apis/autoscaling/v1alpha1` package
       - pkg: knative.dev/serving/pkg/apis/autoscaling/v1alpha1
         alias: autoscalingv1alpha1
@@ -502,6 +466,8 @@ linters-settings:
       # see https://github.com/julz/importas#use-regular-expression for details
       - pkg: knative.dev/serving/pkg/apis/(\w+)/(v[\w\d]+)
         alias: $1$2
+    # using `jwt` alias for `github.com/appleboy/gin-jwt/v2` package
+    jwt: github.com/appleboy/gin-jwt/v2
 
   ireturn:
     # ireturn allows using `allow` and `reject` settings at the same time.
@@ -527,11 +493,14 @@ linters-settings:
     - github.com\/user\/package\/v4\.Type
 
   lll:
-    # max line length, lines longer will be reported. Default is 250.
+    # max line length, lines longer will be reported. Default is 120.
     # '\t' is counted as 1 character by default, and can be changed with the tab-width option
-    line-length: 250
+    line-length: 240
     # tab width in spaces. Default to 1.
     tab-width: 4
+  maligned:
+    # print struct with more effective memory layout or not, false by default
+    suggest-new: true
   misspell:
     # Correct spellings using locale preferences for US or UK.
     # Default is to use a neutral variety of English.
@@ -564,6 +533,8 @@ linters-settings:
   nolintlint:
     # Disable to ensure that all nolint directives actually have an effect. Default is true.
     allow-unused: false
+    # Disable to ensure that nolint directives don't have a leading space. Default is true.
+    allow-leading-space: true
     # Exclude following linters from requiring an explanation.  Default is [].
     allow-no-explanation: [ ]
     # Enable to require an explanation of nonzero length after each nolint directive. Default is false.
@@ -587,13 +558,14 @@ linters-settings:
     strict: false
     # Please refer to https://github.com/yeya24/promlinter#usage for detailed usage.
     disabled-linters:
-     - "Help"
-     - "MetricUnits"
-     - "Counter"
-     - "HistogramSummaryReserved"
-     - "MetricTypeInName"
-     - "ReservedChars"
-     - "CamelCase"
+    #  - "Help"
+    #  - "MetricUnits"
+    #  - "Counter"
+    #  - "HistogramSummaryReserved"
+    #  - "MetricTypeInName"
+    #  - "ReservedChars"
+    #  - "CamelCase"
+    #  - "lintUnitAbbreviations"
     
   predeclared:
     # comma-separated list of predeclared identifiers to not report on
@@ -603,7 +575,6 @@ linters-settings:
   rowserrcheck:
     packages:
       - github.com/jmoiron/sqlx
-
   revive:
     # see https://github.com/mgechev/revive#available-rules for details.
     ignore-generated-header: true
@@ -611,27 +582,15 @@ linters-settings:
     rules:
       - name: indent-error-flow
         severity: warning
-      - name: exported
-        severity: warning
-      - name: var-naming
-        arguments: [ [ "OpenIM"] ]
-        # arguments: [ ["ID", "HTTP", "URL", "URI", "API", "APIKey", "Token", "TokenID", "TokenSecret", "TokenKey", "TokenSecret", "JWT", "JWTToken", "JWTTokenID", "JWTTokenSecret", "JWTTokenKey", "JWTTokenSecret", "OAuth", "OAuthToken", "RPC" ] ]
-      - name: atomic
-      - name: line-length-limit
-        severity: error
-        arguments: [200]
-      - name: unhandled-error
-        arguments : ["fmt.Printf", "myFunction"]
-
   staticcheck:
     # Select the Go version to target. The default is '1.13'.
-    go: "1.20"
+    go: "1.16"
     # https://staticcheck.io/docs/options#checks
     checks: [ "all" ]
 
   stylecheck:
     # Select the Go version to target. The default is '1.13'.
-    go: "1.20"
+    go: "1.16"
 
     # https://staticcheck.io/docs/options#checks
     checks: [ "all", "-ST1000", "-ST1003", "-ST1016", "-ST1020", "-ST1021", "-ST1022" ]
@@ -643,6 +602,7 @@ linters-settings:
     # https://staticcheck.io/docs/options#http_status_code_whitelist
     http-status-code-whitelist: [ "200", "400", "404", "500" ]
 
+
   tagliatelle:
     # check the struck tag name case
     case:
@@ -688,11 +648,12 @@ linters-settings:
     # if it's called for subdir of a project it can't find external interfaces. All text editor integrations
     # with golangci-lint call it on a directory with the changed file.
     check-exported: false
-  # unused:
+  unused:
     # treat code as a program (not a library) and report unused exported identifiers; default is false.
     # XXX: if you enable this setting, unused will report a lot of false-positives in text editors:
     # if it's called for subdir of a project it can't find funcs usages. All text editor integrations
     # with golangci-lint call it on a directory with the changed file.
+    check-exported: false
   whitespace:
     multi-if: false   # Enforces newlines (or comments) after every multi-line if statement
     multi-func: false # Enforces newlines (or comments) after every multi-line function signature
@@ -706,7 +667,6 @@ linters-settings:
       - errors.New(
       - errors.Unwrap(
       - .Wrap(
-      - .WrapMsg(
       - .Wrapf(
       - .WithMessage(
       - .WithMessagef(
@@ -714,8 +674,6 @@ linters-settings:
     ignorePackageGlobs:
         - encoding/*
         - github.com/pkg/*
-        - github.com/openimsdk/*
-        - github.com/OpenIMSDK/*
 
   wsl:
     # If true append is only allowed to be cuddled if appending value is
@@ -742,6 +700,7 @@ linters-settings:
     # Allow only slices initialized with a length of zero. Default is false.
     always: false
 
+
   # The custom section can be used to define linter plugins to be loaded at runtime. See README doc
   #  for more info.
   #custom:
@@ -760,39 +719,88 @@ linters:
   # enable-all: true
   disable-all: true
   enable:
-    - typecheck     # Basic type checking
-    - gofmt         # Format check
-    - govet         # Go's standard linting tool
-    - gosimple      # Suggestions for simplifying code
+    - typecheck
+    - asciicheck
+    - bodyclose
+    - cyclop
+    - deadcode
+    # - depguard
+    - dogsled
+    - dupl
+    - durationcheck
     - errcheck
-    - decorder
+    - errorlint
+    - exhaustive
+    - exportloopref
+    # - forbidigo
+    - funlen
+    # - gci
+    # - gochecknoinits
+    - gocognit
+    - goconst
+    - gocyclo
+    - godot
+    - godox
+    - gofmt
+    - gofumpt
+    - goheader
+    - goimports
+    - gomoddirectives
+    - gomodguard
+    - goprintffuncname
+    - gosec
+    - gosimple
+    - govet
+    - ifshort
+    - importas
     - ineffassign
-    - forbidigo
+    - lll
+    - makezero
+    - misspell
+    - nakedret
+    - nestif
+    - nilerr
+    - nlreturn
+    - noctx
+    - nolintlint
+    - paralleltest
+    - prealloc
+    - predeclared
+    - promlinter
     - revive
-    - reassign
+    - rowserrcheck
+    - sqlclosecheck
+    - staticcheck
+    - structcheck
+    - stylecheck
+    - thelper
     - tparallel
     - unconvert
-    - fieldalignment
-    - dupl
-    - dupword
-    - errname
-    - gci
-    - exhaustive
-    - gocritic
-    - goprintffuncname
-    - gomnd
-    - goconst
-    - gosec
-    - misspell      # Spelling mistakes
-    - staticcheck   # Static analysis
-    - unused        # Checks for unused code
-    # - goimports     # Checks if imports are correctly sorted and formatted
-    - godot         # Checks for comment punctuation
-    - bodyclose     # Ensures HTTP response body is closed
-    - stylecheck    # Style checker for Go code
-    - unused        # Checks for unused code
-    - errcheck      # Checks for missed error returns
-  fast: true
+    - unparam
+    - unused
+    - varcheck
+    - wastedassign
+    - whitespace
+    - bidichk
+    - wastedassign
+    - golint
+    - execinquery
+    - nosprintfhostport
+    - grouper
+    - decorder
+    - errchkjson
+    - maintidx
+      #- containedctx
+      #- tagliatelle
+      #- nonamedreturns
+      #- nilnil
+      #- tenv
+      #- varnamelen
+      #- contextcheck
+      #- errname
+      #- ForceTypeAssert
+      #- nilassign
+  fast: false
 
 issues:
   # List of regexps of issue texts to exclude, empty list by default.
@@ -802,11 +810,14 @@ issues:
   exclude:
     - tools/.*
     - test/.*
-    - components/*
     - third_party/.*
 
   # Excluding configuration per-path, per-linter, per-text and per-source
   exclude-rules:
+    - linters:
+      - golint
+      path: (internal/api/.*)\.go # exclude golint for internal/api/... files
+
     - linters:
       - revive
       path: (log/.*)\.go
@@ -846,7 +857,9 @@ issues:
 
     - path: (pkg/app/.*)\.go
       linters:
+        - deadcode
         - unused
+        - varcheck
         - forbidigo
 
     # Exclude some staticcheck messages
@@ -859,11 +872,6 @@ issues:
         - lll
       source: "^//go:generate "
 
-    - text: ".*[\u4e00-\u9fa5]+.*"
-      linters:
-        - golint
-      source: "^//.*$"
-
   # Independently from option `exclude` we use default exclude patterns,
   # it can be disabled by this option. To list all
   # excluded by default patterns execute `golangci-lint run --help`.
@@ -924,4 +932,4 @@ severity:
   rules:
     - linters:
       - dupl
-      severity: info
+      severity: info

.goreleaser.yaml

@@ -3,36 +3,12 @@
 
 before:
   hooks:
-    - make clean
     # You may remove this if you don't use go modules.
     - make tidy
     - make copyright.add
     # you may remove this if you don't need go generate
     - go generate ./...
 
-git:
-  # What should be used to sort tags when gathering the current and previous
-  # tags if there are more than one tag in the same commit.
-  #
-  # Default: '-version:refname'
-  tag_sort: -version:creatordate
-
-  # What should be used to specify prerelease suffix while sorting tags when gathering
-  # the current and previous tags if there are more than one tag in the same commit.
-  #
-  # Since: v1.17
-  prerelease_suffix: "-"
-
-  # Tags to be ignored by GoReleaser.
-  # This means that GoReleaser will not pick up tags that match any of the
-  # provided values as either previous or current tags.
-  #
-  # Templates: allowed.
-  # Since: v1.21.
-  ignore_tags:
-    - nightly
-    # - "{{.Env.IGNORE_TAG}}"
-  
 snapshot:
   name_template: "{{ incpatch .Version }}-next"
 
@@ -279,9 +255,6 @@ builds:
       - "6"
       - "7"
 
-
-# TODO：Need a script, such as the init - release to help binary to find the right directory
-# ,which can be compiled binary
 archives:
   - format: tar.gz
     # this name template makes the OS and Arch compatible with the results of uname.
@@ -292,23 +265,12 @@ archives:
       {{- else if eq .Arch "386" }}i386
       {{- else }}{{ .Arch }}{{ end }}
       {{- if .Arm }}v{{ .Arm }}{{ end }}
-
-    # Set this to true if you want all files in the archive to be in a single directory.
-    # If set to true and you extract the archive 'goreleaser_Linux_arm64.tar.gz',
-    # you'll get a folder 'goreleaser_Linux_arm64'.
-    # If set to false, all files are extracted separately.
-    # You can also set it to a custom folder name (templating is supported).
-    wrap_in_directory: true
-
     # use zip for windows archives
     files:
+      - LICENSE
+      - README.md
       - CHANGELOG/*
-      - deployment/*
-      - config/*
-      - build/*
-      - scripts/*
-      - Makefile
-      - install.sh
+      - CONTRIBUTING.md
       - docs/*
       - src: "*.md"
         dst: docs
@@ -377,14 +339,12 @@ changelog:
 #   - image_templates:
 #       - "openimsdk/open-im-server:{{ .Tag }}-amd64"
 #       - "ghcr.io/goreleaser/goreleaser:{{ .Tag }}-amd64"
-#     dockerfile: build/images/openim-api/Dockerfile.release
-#     ids: 
-#       - openim-api
+#     dockerfile: Dockerfile
 #     use: buildx
 #     build_flag_templates:
 #       - "--pull"
-#       - "--label=io.artifacthub.package.readme-url=https://raw.githubusercontent.com/openimsdk/open-im-server/main/README.md"
-#       - "--label=io.artifacthub.package.logo-url=hhttps://github.com/openimsdk/open-im-server/blob/main/assets/logo/openim-logo-green.png"
+#       - "--label=io.artifacthub.package.readme-url=https://raw.githubusercontent.com/OpenIMSDK/Open-IM-Server/main/README.md"
+#       - "--label=io.artifacthub.package.logo-url=hhttps://github.com/OpenIMSDK/Open-IM-Server/blob/main/assets/logo/openim-logo-green.png"
 #       - '--label=io.artifacthub.package.maintainers=[{"name":"Xinwei Xiong","email":"3293172751nss@gmail.com"}]'
 #       - "--label=io.artifacthub.package.license=Apace-2.0"
 #       - "--label=org.opencontainers.image.description=OpenIM Open source top instant messaging system"
@@ -399,12 +359,12 @@ changelog:
 #   - image_templates:
 #       - "goreleaser/goreleaser:{{ .Tag }}-arm64"
 #       - "ghcr.io/goreleaser/goreleaser:{{ .Tag }}-arm64"
-#     dockerfile: build/images/openim-api/Dockerfile.release
+#     dockerfile: Dockerfile
 #     use: buildx
 #     build_flag_templates:
 #       - "--pull"
-#       - "--label=io.artifacthub.package.readme-url=https://raw.githubusercontent.com/openimsdk/open-im-server/main/README.md"
-#       - "--label=io.artifacthub.package.logo-url=hhttps://github.com/openimsdk/open-im-server/blob/main/assets/logo/openim-logo-green.png"
+#       - "--label=io.artifacthub.package.readme-url=https://raw.githubusercontent.com/OpenIMSDK/Open-IM-Server/main/README.md"
+#       - "--label=io.artifacthub.package.logo-url=hhttps://github.com/OpenIMSDK/Open-IM-Server/blob/main/assets/logo/openim-logo-green.png"
 #       - '--label=io.artifacthub.package.maintainers=[{"name":"Xinwei Xiong","email":"3293172751nss@gmail.com"}]'
 #       - "--label=io.artifacthub.package.license=Apace-2.0"
 #       - "--label=org.opencontainers.image.description=OpenIM Open source top instant messaging system"
@@ -454,7 +414,7 @@ nfpms:
       - openim-rpc-user
     # Your app's vendor.
     vendor: OpenIMSDK
-    homepage: https://github.com/openimsdk/open-im-server
+    homepage: https://github.com/OpenIMSDK/Open-IM-Server
     maintainer: kubbot <https://github.com/kubbot>
     description: |-
       Auto sync github labels
@@ -519,4 +479,53 @@ checksum:
   algorithm: sha256
 
 release:
+
   prerelease: auto
+  
+  footer: |
+  
+    ## Welcome to the {{ .Tag }} release of [chat](https://github.com/OpenIMSDK/chat)!🎉🎉!
+
+    **Full Changelog**: https://github.com/OpenIMSDK/Open-IM-Server/compare/{{ .PreviousTag }}...{{ .Tag }}
+
+    ## Helping out
+
+    + We release logs are recorded on [✨CHANGELOG](https://github.com/OpenIMSDK/Open-IM-Server/blob/main/CHANGELOG/CHANGELOG.md)
+
+    + For information on versions of OpenIM and how to maintain branches, read [📚this article](https://github.com/OpenIMSDK/Open-IM-Server/blob/main/docs/conversions/version.md)
+
+    + If you wish to use mirroring, read OpenIM's [image management policy](https://github.com/OpenIMSDK/Open-IM-Server/blob/main/docs/conversions/images.md)
+
+    **Want to be one of them 😘?**
+
+    <p align="center">
+        <a href="https://github.com/kubbot" style="float: left; margin-right: 10px;">
+            <img src="https://github.com/openimbot/openimbot/blob/main/assets/icon/blue%E9%80%8F%E6%98%8E.png" width="50" height="50" />
+        </a>
+        <a href="https://www.openim.online">
+            <img src="https://github.com/OpenIMSDK/Open-IM-Server/blob/main/assets/logo/openim-logo.png" />
+        </a>
+        <a href="https://github.com/openimbot" style="float: right; margin-left: 10px;">
+            <img src="https://github.com/openimbot/openimbot/blob/main/assets/icon/red%E9%80%8F%E6%98%8E.png" width="50" height="50" />
+        </a>
+    </p>
+
+    > **Note**
+    > @openimbot and @kubbot have made great contributions to the community as community 🤖robots(@openimsdk/bot), respectively.
+    > Thanks to the @openimsdk/openim team for all their hard work on this release.
+    > Thank you to all the [💕developers and contributors](https://github.com/OpenIMSDK/Open-IM-Server/graphs/contributors), people from all over the world, OpenIM brings us together
+    > Contributions to this project are welcome! Please see [CONTRIBUTING.md](https://github.com/OpenIMSDK/Open-IM-Server/blob/main/CONTRIBUTING.md) for details.
+
+    ## Get Involved with OpenIM!
+
+    **Here are some ways to get involved with the OpenIM community:**
+
+    📢 **Slack Channel**: Join our Slack channels for discussions, communication, and support. Click [here](https://join.slack.com/t/openimsdk/shared_invite/zt-1tmoj26uf-_FDy3dowVHBiGvLk9e5Xkg) to join the Open-IM-Server Slack team channel.
+
+    📧 **Gmail Contact**: If you have any questions, suggestions, or feedback for our open-source projects, please feel free to [contact us via email](https://mail.google.com/mail/?view=cm&fs=1&tf=1&to=winxu81@gmail.com).
+
+    📖 **Blog**: Stay up-to-date with OpenIM-Server projects and trends by reading our [blog](https://doc.rentsoft.cn/). We share the latest developments, tech trends, and other interesting information related to OpenIM.
+
+    📱 **WeChat**: Add us on WeChat (QR Code) and indicate that you are a user or developer of Open-IM-Server. We'll process your request as soon as possible.
+
+    Remember, your contributions play a vital role in making OpenIM successful, and we look forward to your active participation in our community! 🙌

CHANGELOG/.chglog/config.yml

@@ -3,7 +3,7 @@ style: github
 template: CHANGELOG.tpl.md
 info:
   title: CHANGELOG
-  repository_url: https://github.com/openimsdk/open-im-server
+  repository_url: https://github.com/OpenIMSDK/Open-IM-Server
 options:
   tag_filter_pattern: '^v'
   sort: "date"

CHANGELOG/CHANGELOG-1.0.md

@@ -0,0 +1,56 @@
+# Version logging for OpenIM
+
+> **Note**:
+> Deprecated version logging for OpenIM, please refer to [CHANGELOG.md](../CHANGELOG.md)
+
+<!-- BEGIN MUNGE: GENERATED_TOC -->
+
+- [Version logging for OpenIM](#version-logging-for-openim)
+  - [Unreleased](#unreleased)
+  - [v1.0.7 - 2021-12-17](#v107---2021-12-17)
+  - [v1.0.6 - 2021-12-10](#v106---2021-12-10)
+  - [v1.0.5 - 2021-12-03](#v105---2021-12-03)
+  - [v1.0.4 - 2021-11-25](#v104---2021-11-25)
+  - [v1.0.3 - 2021-11-12](#v103---2021-11-12)
+  - [v1.0.1 - 2021-11-04](#v101---2021-11-04)
+  - [v1.0.0 - 2021-10-28](#v100---2021-10-28)
+    - [Reverts](#reverts)
+
+<!-- END MUNGE: GENERATED_TOC -->
+
+<a name="unreleased"></a>
+## [Unreleased]
+
+
+<a name="v1.0.7"></a>
+## [v1.0.7] - 2021-12-17
+
+<a name="v1.0.6"></a>
+## [v1.0.6] - 2021-12-10
+
+<a name="v1.0.5"></a>
+## [v1.0.5] - 2021-12-03
+
+<a name="v1.0.4"></a>
+## [v1.0.4] - 2021-11-25
+
+<a name="v1.0.3"></a>
+## [v1.0.3] - 2021-11-12
+
+<a name="v1.0.1"></a>
+## [v1.0.1] - 2021-11-04
+
+<a name="v1.0.0"></a>
+## v1.0.0 - 2021-10-28
+### Reverts
+- friend modify
+- update
+
+
+[Unreleased]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v1.0.7...HEAD
+[v1.0.7]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v1.0.6...v1.0.7
+[v1.0.6]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v1.0.5...v1.0.6
+[v1.0.5]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v1.0.4...v1.0.5
+[v1.0.4]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v1.0.3...v1.0.4
+[v1.0.3]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v1.0.1...v1.0.3
+[v1.0.1]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v1.0.0...v1.0.1

CHANGELOG/CHANGELOG-2.0.md

@@ -0,0 +1,121 @@
+# Version logging for OpenIM:v2.0
+
+> **Note**:
+> Deprecated version logging for OpenIM, please refer to [CHANGELOG.md](../CHANGELOG.md)
+
+<!-- BEGIN MUNGE: GENERATED_TOC -->
+
+- [Version logging for OpenIM:v2.0](#version-logging-for-openimv20)
+  - [\[Unreleased\]](#unreleased)
+  - [\[v2.0.10\] - 2022-05-13](#v2010---2022-05-13)
+  - [\[v2.0.9\] - 2022-04-29](#v209---2022-04-29)
+    - [Reverts](#reverts)
+    - [Pull Requests](#pull-requests)
+  - [\[v2.0.8\] - 2022-04-24](#v208---2022-04-24)
+    - [Pull Requests](#pull-requests-1)
+  - [\[v2.0.7\] - 2022-04-08](#v207---2022-04-08)
+    - [Pull Requests](#pull-requests-2)
+  - [\[v2.0.6\] - 2022-04-01](#v206---2022-04-01)
+    - [Pull Requests](#pull-requests-3)
+  - [\[v2.0.5\] - 2022-03-24](#v205---2022-03-24)
+  - [\[v2.04\] - 2022-03-18](#v204---2022-03-18)
+  - [\[v2.0.3\] - 2022-03-11](#v203---2022-03-11)
+  - [\[v2.0.2\] - 2022-03-04](#v202---2022-03-04)
+    - [Pull Requests](#pull-requests-4)
+  - [\[v2.0.1\] - 2022-02-25](#v201---2022-02-25)
+  - [v2.0.0 - 2022-02-23](#v200---2022-02-23)
+    - [Reverts](#reverts-1)
+
+<!-- END MUNGE: GENERATED_TOC -->
+
+
+<a name="unreleased"></a>
+
+## [Unreleased]
+
+
+<a name="v2.0.10"></a>
+
+## [v2.0.10] - 2022-05-13
+
+<a name="v2.0.9"></a>
+
+## [v2.0.9] - 2022-04-29
+
+### Reverts
+
+- update etcd to v3.5.2 ([#206](https://github.com/OpenIMSDK/Open-IM-Server/issues/206))
+
+### Pull Requests
+
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+
+
+<a name="v2.0.8"></a>
+
+## [v2.0.8] - 2022-04-24
+
+### Pull Requests
+
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+
+
+<a name="v2.0.7"></a>
+
+## [v2.0.7] - 2022-04-08
+
+### Pull Requests
+
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+
+
+<a name="v2.0.6"></a>
+
+## [v2.0.6] - 2022-04-01
+
+### Pull Requests
+
+- Merge branch 'tuoyun'
+
+
+<a name="v2.0.5"></a>
+
+## [v2.0.5] - 2022-03-24
+
+<a name="v2.04"></a>
+
+## [v2.04] - 2022-03-18
+
+<a name="v2.0.3"></a>
+
+## [v2.0.3] - 2022-03-11
+
+<a name="v2.0.2"></a>
+
+## [v2.0.2] - 2022-03-04
+
+### Pull Requests
+
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+
+
+<a name="v2.0.1"></a>
+
+## [v2.0.1] - 2022-02-25
+
+<a name="v2.0.0"></a>
+
+## v2.0.0 - 2022-02-23
+
+### Reverts

CHANGELOG/CHANGELOG-2.1.md

@@ -0,0 +1,50 @@
+# Version logging for OpenIM:v2.1
+
+> **Note**:
+> Deprecated version logging for OpenIM, please refer to [CHANGELOG.md](../CHANGELOG.md)
+
+<!-- BEGIN MUNGE: GENERATED_TOC -->
+
+- [Version logging for OpenIM:v2.1](#version-logging-for-openimv21)
+  - [Unreleased](#unreleased)
+  - [v2.1.0 - 2022-06-17](#v210---2022-06-17)
+    - [Reverts](#reverts)
+    - [Pull Requests](#pull-requests)
+
+
+<!-- END MUNGE: GENERATED_TOC -->
+
+<a name="unreleased"></a>
+## [Unreleased]
+
+
+<a name="v2.1.0"></a>
+## v2.1.0 - 2022-06-17
+### Reverts
+- update etcd to v3.5.2 ([#206](https://github.com/OpenIMSDK/Open-IM-Server/issues/206))
+- friend modify
+- update
+
+### Pull Requests
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+
+
+[Unreleased]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.1.0...HEAD

CHANGELOG/CHANGELOG-2.2.md

@@ -0,0 +1,50 @@
+# Version logging for OpenIM:v2.2
+
+> **Note**:
+> Deprecated version logging for OpenIM, please refer to [CHANGELOG.md](../CHANGELOG.md)
+
+<!-- BEGIN MUNGE: GENERATED_TOC -->
+
+- [Version logging for OpenIM:v2.2](#version-logging-for-openimv22)
+  - [Unreleased](#unreleased)
+  - [v2.2.0 - 2022-07-01](#v220---2022-07-01)
+    - [Reverts](#reverts)
+    - [Pull Requests](#pull-requests)
+
+
+<!-- END MUNGE: GENERATED_TOC -->
+
+<a name="unreleased"></a>
+## [Unreleased]
+
+
+<a name="v2.2.0"></a>
+## v2.2.0 - 2022-07-01
+### Reverts
+- update etcd to v3.5.2 ([#206](https://github.com/OpenIMSDK/Open-IM-Server/issues/206))
+- friend modify
+- update
+
+### Pull Requests
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+
+
+[Unreleased]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.2.0...HEAD

CHANGELOG/CHANGELOG-2.3.md

@@ -0,0 +1,70 @@
+# Version logging for OpenIM:v2.3
+
+> **Note**:
+> Deprecated version logging for OpenIM, please refer to [CHANGELOG.md](../CHANGELOG.md)
+
+<!-- BEGIN MUNGE: GENERATED_TOC -->
+
+- [Version logging for OpenIM:v2.3](#version-logging-for-openimv23)
+  - [Unreleased](#unreleased)
+  - [v2.3.3 - 2022-09-18](#v233---2022-09-18)
+  - [v2.3.2 - 2022-09-09](#v232---2022-09-09)
+  - [v2.3.0-rc2 - 2022-07-29](#v230-rc2---2022-07-29)
+  - [v2.3.0-rc1 - 2022-07-25](#v230-rc1---2022-07-25)
+  - [v2.3.0-rc0 - 2022-07-15](#v230-rc0---2022-07-15)
+    - [Reverts](#reverts)
+    - [Pull Requests](#pull-requests)
+
+
+<!-- END MUNGE: GENERATED_TOC -->
+
+<a name="unreleased"></a>
+## [Unreleased]
+
+
+<a name="v2.3.3"></a>
+## [v2.3.3] - 2022-09-18
+
+<a name="v2.3.2"></a>
+## [v2.3.2] - 2022-09-09
+
+<a name="v2.3.0-rc2"></a>
+## [v2.3.0-rc2] - 2022-07-29
+
+<a name="v2.3.0-rc1"></a>
+## [v2.3.0-rc1] - 2022-07-25
+
+<a name="v2.3.0-rc0"></a>
+## v2.3.0-rc0 - 2022-07-15
+### Reverts
+- update etcd to v3.5.2 ([#206](https://github.com/OpenIMSDK/Open-IM-Server/issues/206))
+- friend modify
+- update
+
+### Pull Requests
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+
+
+[Unreleased]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.3.3...HEAD
+[v2.3.3]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.3.2...v2.3.3
+[v2.3.2]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.3.0-rc2...v2.3.2
+[v2.3.0-rc2]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.3.0-rc1...v2.3.0-rc2
+[v2.3.0-rc1]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.3.0-rc0...v2.3.0-rc1

CHANGELOG/CHANGELOG-2.9.md

@@ -0,0 +1,52 @@
+# Version logging for OpenIM
+
+<!-- BEGIN MUNGE: GENERATED_TOC -->
+
+- [Version logging for OpenIM](#version-logging-for-openim)
+  - [Unreleased](#unreleased)
+  - [v2.9.0+1.839643f - 2023-07-07](#v2901839643f---2023-07-07)
+  - [v2.9.0+2.35f07fe - 2023-07-06](#v290235f07fe---2023-07-06)
+  - [v2.9.0+1.b5072b1 - 2023-07-05](#v2901b5072b1---2023-07-05)
+  - [v2.9.0+3.2667a3a - 2023-07-05](#v29032667a3a---2023-07-05)
+  - [v2.9.0+7.04818ca - 2023-07-05](#v290704818ca---2023-07-05)
+  - [v2.9.0 - 2023-07-04](#v290---2023-07-04)
+    - [Reverts](#reverts)
+    - [Pull Requests](#pull-requests)
+
+
+<!-- END MUNGE: GENERATED_TOC -->
+
+<a name="unreleased"></a>
+## [Unreleased]
+
+
+<a name="v2.9.0+1.839643f"></a>
+## [v2.9.0+1.839643f] - 2023-07-07
+
+<a name="v2.9.0+2.35f07fe"></a>
+## [v2.9.0+2.35f07fe] - 2023-07-06
+
+<a name="v2.9.0+1.b5072b1"></a>
+## [v2.9.0+1.b5072b1] - 2023-07-05
+
+<a name="v2.9.0+3.2667a3a"></a>
+## [v2.9.0+3.2667a3a] - 2023-07-05
+
+<a name="v2.9.0+7.04818ca"></a>
+## [v2.9.0+7.04818ca] - 2023-07-05
+
+<a name="v2.9.0"></a>
+## v2.9.0 - 2023-07-04
+### Reverts
+- update etcd to v3.5.2 ([#206](https://github.com/OpenIMSDK/Open-IM-Server/issues/206))
+
+### Pull Requests
+- Merge branch 'tuoyun'
+
+
+[Unreleased]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.9.0+1.839643f...HEAD
+[v2.9.0+1.839643f]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.9.0+2.35f07fe...v2.9.0+1.839643f
+[v2.9.0+2.35f07fe]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.9.0+1.b5072b1...v2.9.0+2.35f07fe
+[v2.9.0+1.b5072b1]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.9.0+3.2667a3a...v2.9.0+1.b5072b1
+[v2.9.0+3.2667a3a]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.9.0+7.04818ca...v2.9.0+3.2667a3a
+[v2.9.0+7.04818ca]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.9.0...v2.9.0+7.04818ca

CHANGELOG/CHANGELOG-3.0.md

@@ -0,0 +1,188 @@
+# Version logging for OpenIM
+
+<!-- BEGIN MUNGE: GENERATED_TOC -->
+- [Version logging for OpenIM](#version-logging-for-openim)
+  - [Unreleased](#unreleased)
+  - [v2.9.0 - 2023-07-04](#v290---2023-07-04)
+    - [Reverts](#reverts)
+    - [Pull Requests](#pull-requests)
+  - [v2.3.3 - 2022-09-18](#v233---2022-09-18)
+  - [v2.3.2 - 2022-09-09](#v232---2022-09-09)
+  - [v2.3.0-rc2 - 2022-07-29](#v230-rc2---2022-07-29)
+  - [v2.3.0-rc1 - 2022-07-25](#v230-rc1---2022-07-25)
+  - [v2.3.0-rc0 - 2022-07-15](#v230-rc0---2022-07-15)
+  - [v2.2.0 - 2022-07-01](#v220---2022-07-01)
+  - [v2.1.0 - 2022-06-17](#v210---2022-06-17)
+    - [Pull Requests](#pull-requests-1)
+  - [v2.0.10 - 2022-05-13](#v2010---2022-05-13)
+  - [v2.0.9 - 2022-04-29](#v209---2022-04-29)
+    - [Reverts](#reverts-1)
+    - [Pull Requests](#pull-requests-2)
+  - [v2.0.7 - 2022-04-08](#v207---2022-04-08)
+    - [Pull Requests](#pull-requests-3)
+  - [v2.0.6 - 2022-04-01](#v206---2022-04-01)
+    - [Pull Requests](#pull-requests-4)
+  - [v2.0.5 - 2022-03-24](#v205---2022-03-24)
+  - [v2.04 - 2022-03-18](#v204---2022-03-18)
+  - [v2.0.3 - 2022-03-11](#v203---2022-03-11)
+  - [v2.0.2 - 2022-03-04](#v202---2022-03-04)
+    - [Pull Requests](#pull-requests-5)
+  - [v2.0.1 - 2022-02-25](#v201---2022-02-25)
+  - [v2.0.0 - 2022-02-23](#v200---2022-02-23)
+  - [v1.0.7 - 2021-12-17](#v107---2021-12-17)
+  - [v1.0.6 - 2021-12-10](#v106---2021-12-10)
+  - [v1.0.5 - 2021-12-03](#v105---2021-12-03)
+  - [v1.0.4 - 2021-11-25](#v104---2021-11-25)
+  - [v1.0.3 - 2021-11-12](#v103---2021-11-12)
+  - [v1.0.1 - 2021-11-04](#v101---2021-11-04)
+  - [v1.0.0 - 2021-10-28](#v100---2021-10-28)
+    - [Reverts](#reverts-2)
+
+<!-- END MUNGE: GENERATED_TOC -->
+
+<a name="unreleased"></a>
+## [Unreleased]
+
+
+<a name="v2.9.0"></a>
+## [v2.9.0] - 2023-07-04
+### Reverts
+- update etcd to v3.5.2 ([#206](https://github.com/OpenIMSDK/Open-IM-Server/issues/206))
+
+### Pull Requests
+- Merge branch 'tuoyun'
+
+
+<a name="v2.3.3"></a>
+## [v2.3.3] - 2022-09-18
+
+<a name="v2.3.2"></a>
+## [v2.3.2] - 2022-09-09
+
+<a name="v2.3.0-rc2"></a>
+## [v2.3.0-rc2] - 2022-07-29
+
+<a name="v2.3.0-rc1"></a>
+## [v2.3.0-rc1] - 2022-07-25
+
+<a name="v2.3.0-rc0"></a>
+## [v2.3.0-rc0] - 2022-07-15
+
+<a name="v2.2.0"></a>
+## [v2.2.0] - 2022-07-01
+
+<a name="v2.1.0"></a>
+## [v2.1.0] - 2022-06-17
+### Pull Requests
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+
+
+<a name="v2.0.10"></a>
+## [v2.0.10] - 2022-05-13
+
+<a name="v2.0.9"></a>
+## [v2.0.9] - 2022-04-29
+### Reverts
+- update etcd to v3.5.2 ([#206](https://github.com/OpenIMSDK/Open-IM-Server/issues/206))
+
+### Pull Requests
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+
+
+<a name="v2.0.7"></a>
+## [v2.0.7] - 2022-04-08
+### Pull Requests
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+
+
+<a name="v2.0.6"></a>
+## [v2.0.6] - 2022-04-01
+### Pull Requests
+- Merge branch 'tuoyun'
+
+
+<a name="v2.0.5"></a>
+## [v2.0.5] - 2022-03-24
+
+<a name="v2.04"></a>
+## [v2.04] - 2022-03-18
+
+<a name="v2.0.3"></a>
+## [v2.0.3] - 2022-03-11
+
+<a name="v2.0.2"></a>
+## [v2.0.2] - 2022-03-04
+### Pull Requests
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+
+
+<a name="v2.0.1"></a>
+## [v2.0.1] - 2022-02-25
+
+<a name="v2.0.0"></a>
+## [v2.0.0] - 2022-02-23
+
+<a name="v1.0.7"></a>
+## [v1.0.7] - 2021-12-17
+
+<a name="v1.0.6"></a>
+## [v1.0.6] - 2021-12-10
+
+<a name="v1.0.5"></a>
+## [v1.0.5] - 2021-12-03
+
+<a name="v1.0.4"></a>
+## [v1.0.4] - 2021-11-25
+
+<a name="v1.0.3"></a>
+## [v1.0.3] - 2021-11-12
+
+<a name="v1.0.1"></a>
+## [v1.0.1] - 2021-11-04
+
+<a name="v1.0.0"></a>
+## v1.0.0 - 2021-10-28
+### Reverts
+- friend modify
+- update
+
+
+[Unreleased]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.9.0...HEAD
+[v2.9.0]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.3.3...v2.9.0
+[v2.3.3]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.3.2...v2.3.3
+[v2.3.2]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.3.0-rc2...v2.3.2
+[v2.3.0-rc2]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.3.0-rc1...v2.3.0-rc2
+[v2.3.0-rc1]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.3.0-rc0...v2.3.0-rc1
+[v2.3.0-rc0]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.2.0...v2.3.0-rc0
+[v2.2.0]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.1.0...v2.2.0
+[v2.1.0]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.0.10...v2.1.0
+[v2.0.10]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.0.9...v2.0.10
+[v2.0.9]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.0.7...v2.0.9
+[v2.0.7]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.0.6...v2.0.7
+[v2.0.6]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.0.5...v2.0.6
+[v2.0.5]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.04...v2.0.5
+[v2.04]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.0.3...v2.04
+[v2.0.3]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.0.2...v2.0.3
+[v2.0.2]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.0.1...v2.0.2
+[v2.0.1]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.0.0...v2.0.1
+[v2.0.0]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v1.0.7...v2.0.0
+[v1.0.7]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v1.0.6...v1.0.7
+[v1.0.6]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v1.0.5...v1.0.6
+[v1.0.5]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v1.0.4...v1.0.5
+[v1.0.4]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v1.0.3...v1.0.4
+[v1.0.3]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v1.0.1...v1.0.3
+[v1.0.1]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v1.0.0...v1.0.1

CHANGELOG/CHANGELOG.md

@@ -0,0 +1,109 @@
+# Changelog
+
+- [Changelog](#changelog)
+  - [OpenIM versioning policy](#openim-versioning-policy)
+  - [command](#command)
+  - [create next tag](#create-next-tag)
+  - [Release version logs](#release-version-logs)
+  - [Introduction](#introduction)
+  - [Naming Format](#naming-format)
+  - [Examples](#examples)
+  - [Version Modifiers](#version-modifiers)
+  - [Versioning Strategy](#versioning-strategy)
+
+
+All notable changes to this project will be documented in this file.
+
++ [https://github.com/OpenIMSDK/Open-IM-Server/releases](https://github.com/OpenIMSDK/Open-IM-Server/releases)
+
+## OpenIM versioning policy
+
++ [OpenIM Version](../docs/conversions/version.md)
+
+## command
+
+```bash
+git-chglog --tag-filter-pattern 'v2.0.*'  -o CHANGELOG-2.0.md
+```
+
+## create next tag
+
+```bash
+git-chglog --next-tag 2.0.0 -o CHANGELOG.md
+git commit -am "release 2.0.0"
+git tag 2.0.0
+```
+
+| Query          | Description                                    | Example                     |
+| -------------- | ---------------------------------------------- | --------------------------- |
+| `<old>..<new>` | Commit contained in `<new>` tags from `<old>`. | `$ git-chglog 1.0.0..2.0.0` |
+| `<name>..`     | Commit from the `<name>` to the latest tag.    | `$ git-chglog 1.0.0..`      |
+| `..<name>`     | Commit from the oldest tag to `<name>`.        | `$ git-chglog ..2.0.0`      |
+| `<name>`       | Commit contained in `<name>`.                  | `$ git-chglog 1.0.0`        |
+
+
+## Release version logs
+
++ [OpenIM CHANGELOG-V1.0](CHANGELOG-1.0.md)
++ [OpenIM CHANGELOG-V2.0](CHANGELOG-2.0.md)
++ [OpenIM CHANGELOG-V2.1](CHANGELOG-2.1.md)
++ [OpenIM CHANGELOG-V2.2](CHANGELOG-2.2.md)
++ [OpenIM CHANGELOG-V2.3](CHANGELOG-2.3.md)
++ [OpenIM CHANGELOG-V2.9](CHANGELOG-2.9.md)
++ [OpenIM CHANGELOG-V3.0](CHANGELOG-3.0.md)
+
+## Introduction
+
+In both the open-source and closed-source software development communities, it is important to follow a consistent and understandable versioning scheme for software projects. This ensures clear communication of changes, compatibility, and stability across different releases. One widely adopted naming convention is the Semantic Versioning 2.0.0.
+
+## Naming Format
+
+The most common format for version numbers is as follows:
+
+```
+major.minor[.patch[.build]]
+```
+
+Let's take a closer look at each component:
+
+1. **Major Version**: This is the first number in the versioning scheme and indicates significant changes that may not be backward compatible (specific to each project).
+2. **Minor Version**: The second number signifies the addition of new features while maintaining backward compatibility.
+3. **Patch Version**: The third number represents bug fixes or code optimizations without introducing new features. It is generally backward compatible.
+4. **Build Version**: Typically an automatically generated number that increments with each code commit.
+
+## Examples
+
+Here are a few examples to illustrate the versioning scheme:
+
+1. `1.0`
+2. `2.14.0.1478`
+3. `3.2.1 build-354`
+
+## Version Modifiers
+
+Apart from the version numbers, there are also version modifiers used to indicate specific stages or statuses of a release. Some commonly used version modifiers include:
+
+- **alpha**: An internal testing version with numerous known bugs. It is primarily used for communication among developers.
+- **beta**: A testing version released to enthusiastic users for feedback and bug detection.
+- **rc (release candidate)**: The final testing version before the official release.
+- **ga (general availability)**: The initial stable release for public distribution.
+- **r/release** (or no modifier at all): The final released version intended for general users.
+- **lts (long-term support)**: Designates a version that will receive extended maintenance and bug fixes for a specified number of years.
+
+## Versioning Strategy
+
+To effectively manage version numbers, the following strategies are commonly employed:
+
+- The initial version of a project can be either `0.1` or `1.0`.
+- When fixing bugs, the patch version is incremented by 1.
+- When adding new features, the minor version is incremented by 1, and the patch version is reset to 0.
+- In the case of significant modifications, the major version is incremented by 1.
+- The build version is usually automatically generated by the compilation process and follows a defined format. It does not require manual control.
+
+By adhering to these strategies and guidelines, developers can maintain consistency and clarity in versioning their software projects. This enables users and collaborators to understand the nature of changes between different releases and ensure compatibility with their systems.
+
+(Note: Markdown formatting has been used to structure this article. Markdown is a lightweight markup language used to format text on platforms like GitHub.)
+
+------
+
+**Note**: The above article is based on the given content and aims to provide a Markdown-formatted English article explaining the naming conventions for software project versions, specifically focusing on the Semantic Versioning 2.0.0.

CODE_OF_CONDUCT.md

@@ -60,7 +60,7 @@ representative at an online or offline event.
 
 Instances of abusive, harassing, or otherwise unacceptable behavior may be
 reported to the community leaders responsible for enforcement at
-`security@openim.io`.
+3293172751nss@gmail.com.
 All complaints will be reviewed and investigated promptly and fairly.
 
 All community leaders are obligated to respect the privacy and security of the

CONTRIBUTING-zh_CN.md

@@ -1,96 +0,0 @@
-
-
-# 如何给 OpenIM 贡献代码（提交 Pull Request）
-
-<p align="center">
-  <a href="./CONTRIBUTING.md">English</a> · 
-  <a href="./CONTRIBUTING-zh_CN.md">中文</a> · 
-  <a href="docs/contributing/CONTRIBUTING-UA.md">Українська</a> · 
-  <a href="docs/contributing/CONTRIBUTING-CS.md">Česky</a> · 
-  <a href="docs/contributing/CONTRIBUTING-HU.md">Magyar</a> · 
-  <a href="docs/contributing/CONTRIBUTING-ES.md">Español</a> · 
-  <a href="docs/contributing/CONTRIBUTING-FA.md">فارسی</a> · 
-  <a href="docs/contributing/CONTRIBUTING-FR.md">Français</a> · 
-  <a href="docs/contributing/CONTRIBUTING-DE.md">Deutsch</a> · 
-  <a href="docs/contributing/CONTRIBUTING-PL.md">Polski</a> · 
-  <a href="docs/contributing/CONTRIBUTING-ID.md">Indonesian</a> · 
-  <a href="docs/contributing/CONTRIBUTING-FI.md">Suomi</a> · 
-  <a href="docs/contributing/CONTRIBUTING-ML.md">മലയാളം</a> · 
-  <a href="docs/contributing/CONTRIBUTING-JP.md">日本語</a> · 
-  <a href="docs/contributing/CONTRIBUTING-NL.md">Nederlands</a> · 
-  <a href="docs/contributing/CONTRIBUTING-IT.md">Italiano</a> · 
-  <a href="docs/contributing/CONTRIBUTING-RU.md">Русский</a> · 
-  <a href="docs/contributing/CONTRIBUTING-PTBR.md">Português (Brasil)</a> · 
-  <a href="docs/contributing/CONTRIBUTING-EO.md">Esperanto</a> · 
-  <a href="docs/contributing/CONTRIBUTING-KR.md">한국어</a> · 
-  <a href="docs/contributing/CONTRIBUTING-AR.md">العربي</a> · 
-  <a href="docs/contributing/CONTRIBUTING-VN.md">Tiếng Việt</a> · 
-  <a href="docs/contributing/CONTRIBUTING-DA.md">Dansk</a> · 
-  <a href="docs/contributing/CONTRIBUTING-GR.md">Ελληνικά</a> · 
-  <a href="docs/contributing/CONTRIBUTING-TR.md">Türkçe</a>
-</p>
-
-本指南将以 [openimsdk/open-im-server](https://github.com/openimsdk/open-im-server) 为例，详细说明如何为 OpenIM 项目贡献代码。我们采用“一问题一分支”的策略，确保每个 Issue 都对应一个专门的分支，以便有效管理代码变更。
-
-### 1. Fork 仓库
-前往 [openimsdk/open-im-server](https://github.com/openimsdk/open-im-server) GitHub 页面，点击右上角的 "Fork" 按钮，将仓库 Fork 到你的 GitHub 账户下。
-
-### 2. 克隆仓库
-将你 Fork 的仓库克隆到本地：
-```bash
-git clone https://github.com/your-username/open-im-server.git
-```
-
-### 3. 设置远程上游
-添加原始仓库为远程上游以便跟踪其更新：
-```bash
-git remote add upstream https://github.com/openimsdk/open-im-server.git
-```
-
-### 4. 创建 Issue
-在原始仓库中创建一个新的 Issue，详细描述你遇到的问题或希望添加
-
-的新功能。
-
-### 5. 创建新分支
-基于主分支创建一个新分支，并使用描述性的名称与 Issue ID，例如：
-```bash
-git checkout -b fix-bug-123
-```
-
-### 6. 提交更改
-在你的本地分支上进行更改后，提交这些更改：
-```bash
-git add .
-git commit -m "Describe your changes in detail"
-```
-
-### 7. 推送分支
-将你的分支推送回你的 GitHub Fork：
-```bash
-git push origin fix-bug-123
-```
-
-### 8. 创建 Pull Request
-在 GitHub 上转到你的 Fork 仓库，点击 "Pull Request" 按钮。确保 PR 描述清楚，并链接到相关的 Issue。
-
-### 9. 签署 CLA
-如果这是你第一次提交 PR，你需要在 PR 的评论中回复：
-```
-I have read the CLA Document and I hereby sign the CLA
-```
-
-### 编程规范
-请参考以下文档以了解关于 Go 语言编程规范的详细信息：
-- [Go 编码规范](https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/go-code.md)
-- [代码约定](https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/code-conventions.md)
-
-### 日志规范
-- **禁止使用标准的 `log` 包**。
-- 应使用 `"github.com/openimsdk/tools/log"` 包来打印日志，该包支持多种日志级别：`debug`、`info`、`warn`、`error`。
-- **错误日志应仅在首次调用的函数中打印**，以防止日志重复，并确保错误的上下文清晰。
-
-### 异常及错误处理
-- **禁止使用 `panic`**：程序中不应使用 `panic`，以避免在遇到不可恢复的错误时突然终止。
-- **错误包裹**：使用 `"github.com/openimsdk/tools/errs"` 来包裹错误，保持错误信息的完整性并增加调试便利。
-- **错误传递**：如果函数本身不能处理错误，应将错误返回给调用者，而不是隐藏或忽略这些错误。

CONTRIBUTING.md

@@ -1,94 +1,372 @@
-# How to Contribute to OpenIM (Submitting Pull Requests)
+#  Contributing to Open-IM-Server
 
-<p align="center">
-  <a href="./CONTRIBUTING.md">English</a> · 
-  <a href="./CONTRIBUTING-zh_CN.md">中文</a> · 
-  <a href="docs/contributing/CONTRIBUTING-UA.md">Українська</a> · 
-  <a href="docs/contributing/CONTRIBUTING-CS.md">Česky</a> · 
-  <a href="docs/contributing/CONTRIBUTING-HU.md">Magyar</a> · 
-  <a href="docs/contributing/CONTRIBUTING-ES.md">Español</a> · 
-  <a href="docs/contributing/CONTRIBUTING-FA.md">فارسی</a> · 
-  <a href="docs/contributing/CONTRIBUTING-FR.md">Français</a> · 
-  <a href="docs/contributing/CONTRIBUTING-DE.md">Deutsch</a> · 
-  <a href="docs/contributing/CONTRIBUTING-PL.md">Polski</a> · 
-  <a href="docs/contributing/CONTRIBUTING-ID.md">Indonesian</a> · 
-  <a href="docs/contributing/CONTRIBUTING-FI.md">Suomi</a> · 
-  <a href="docs/contributing/CONTRIBUTING-ML.md">മലയാളം</a> · 
-  <a href="docs/contributing/CONTRIBUTING-JP.md">日本語</a> · 
-  <a href="docs/contributing/CONTRIBUTING-NL.md">Nederlands</a> · 
-  <a href="docs/contributing/CONTRIBUTING-IT.md">Italiano</a> · 
-  <a href="docs/contributing/CONTRIBUTING-RU.md">Русский</a> · 
-  <a href="docs/contributing/CONTRIBUTING-PTBR.md">Português (Brasil)</a> · 
-  <a href="docs/contributing/CONTRIBUTING-EO.md">Esperanto</a> · 
-  <a href="docs/contributing/CONTRIBUTING-KR.md">한국어</a> · 
-  <a href="docs/contributing/CONTRIBUTING-AR.md">العربي</a> · 
-  <a href="docs/contributing/CONTRIBUTING-VN.md">Tiếng Việt</a> · 
-  <a href="docs/contributing/CONTRIBUTING-DA.md">Dansk</a> · 
-  <a href="docs/contributing/CONTRIBUTING-GR.md">Ελληνικά</a> · 
-  <a href="docs/contributing/CONTRIBUTING-TR.md">Türkçe</a>
-</p>
+So, you want to hack on Open-IM-Server? Yay!
 
-This guide will use [openimsdk/open-im-server](https://github.com/openimsdk/open-im-server) as an example to explain in detail how to contribute code to the OpenIM project. We adopt a "one issue, one branch" strategy to ensure each issue corresponds to a dedicated branch for effective code change management.
+First of all, thank you for considering contributing to our project! We appreciate your time and effort, and we value any contribution, whether it's reporting a bug, suggesting a new feature, or submitting a pull request.
 
-### 1. Fork the Repository
-Go to the [openimsdk/open-im-server](https://github.com/openimsdk/open-im-server) GitHub page, click the "Fork" button in the upper right corner to fork the repository to your GitHub account.
+This document provides guidelines and best practices to help you contribute effectively.
+
+## 📇Topics
+
+- [Contributing to Open-IM-Server](#contributing-to-open-im-server)
+  - [📇Topics](#topics)
+  - [What we expect of you](#what-we-expect-of-you)
+  - [Code of ConductCode of Conduct](#code-of-conductcode-of-conduct)
+      - [Code and doc contribution](#code-and-doc-contribution)
+      - [Where should I start?](#where-should-i-start)
+      - [Design documents](#design-documents)
+  - [Getting Started](#getting-started)
+  - [Style and Specification](#style-and-specification)
+      - [Reporting security issues](#reporting-security-issues)
+      - [Reporting general issues](#reporting-general-issues)
+      - [Commit Rules](#commit-rules)
+      - [PR Description](#pr-description)
+      - [Docs Contribution](#docs-contribution)
+  - [Engage to help anything](#engage-to-help-anything)
+  - [Release version](#release-version)
+  - [Contact Us](#contact-us)
+
+## What we expect of you
+
+We hope that anyone can join Open-IM-Server , even if you are a student, writer, translator
+
+Please meet the minimum version of the Go language published in [go.mod](./go.mod). If you want to manage the Go language version, we provide tools to install [gvm](https://github.com/moovweb/gvm) in our [Makefile](./Makefile)
+
+You'd better use Linux OR WSL as the development environment, Linux with [Makefile](./Makefile) can help you quickly build and test Open-IM-Server project.
+
+If you are familiar with [Makefile](./Makefile) , you can easily see the clever design of the Open-IM-Server Makefile. Storing the necessary tools such as golangci in the `/tools` directory can avoid some tool version issues.
+
+The [Makefile](./Makefile) is for every developer, even if you don't know how to use the Makefile tool, don't worry, we provide two great commands to get you up to speed with the Makefile architecture, `make help` and `make help-all`, it can reduce problems of the developing environment.
+
+## Code of ConductCode of Conduct
+
+#### Code and doc contribution
+
+Every action to make project Open-IM-Server better is encouraged. On GitHub, every improvement for Open-IM-Server could be via a [PR](https://github.com/OpenIMSDK/Open-IM-Server/pulls) (short for pull request).
+
++ If you find a typo, try to fix it!
++ If you find a bug, try to fix it!
++ If you find some redundant codes, try to remove them!
++ If you find some test cases missing, try to add them!
++ If you could enhance a feature, please **DO NOT** hesitate!
++ If you find code implicit, try to add comments to make it clear!
++ If you find code ugly, try to refactor that!
++ If you can help to improve documents, it could not be better!
++ If you find document incorrect, just do it and fix that!
++ ...
+
+#### Where should I start?
+
++ If you are new to the project, don't know how to contribute Open-IM-Server, please check out the [good first issue](https://github.com/OpenIMSDK/Open-IM-Server/issues?q=is%3Aopen+label%3A"good+first+issue"+sort%3Aupdated-desc) label.
++ You should be good at filtering the Open-IM-Server issue tags and finding the ones you like, such as [RFC](https://github.com/OpenIMSDK/Open-IM-Server/issues?q=is%3Aissue+is%3Aopen+RFC+label%3ARFC) for big initiatives, features for [feature](https://github.com/OpenIMSDK/Open-IM-Server/issues?q=is%3Aissue+label%3Afeature) proposals, and [bug](https://github.com/OpenIMSDK/Open-IM-Server/issues?q=is%3Aissue+label%3Abug+) fixes.
++ If you are looking for something to work on, check out our [open issues](https://github.com/OpenIMSDK/Open-IM-Server/issues?q=is%3Aissue+is%3Aopen+sort%3Aupdated-desc).
++ If you have an idea for a new feature, please [open an issue](https://github.com/OpenIMSDK/Open-IM-Server/issues/new/choose), and we can discuss it.
+
+#### Design documents
+
+For any substantial design, there should be a well-crafted design document. This document is not just a simple record, but also a detailed description and manifestation, which can help team members better understand the design thinking and grasp the design direction. In the process of writing the design document, we can choose to use tools such as `Google Docs` or `Notion`, and even mark RFC in [issues](https://github.com/OpenIMSDK/Open-IM-Server/issues?q=is%3Aissue+is%3Aopen+RFC+label%3ARFC) or [discussions](https://github.com/OpenIMSDK/Open-IM-Server/discussions) for better collaboration. Of course, after completing the design document, we should also add it to our [Shared Drive](https://drive.google.com/drive/) and notify the appropriate working group to let everyone know of its existence. Only by doing so can we maximize the effectiveness of the design document and provide strong support for the smooth progress of the project.
+
+Anybody can access the shared Drive for reading. To get access to comment. Once you've done that, head to the [shared Drive](https://drive.google.com/) and behold all the docs.
+
+In addition to that, we'd love to invite you to [join our Slack](https://join.slack.com/t/openimsdk/shared_invite/zt-1tmoj26uf-_FDy3dowVHBiGvLk9e5Xkg) where you can play with your imagination, tell us what you're working on, and get a quick response.
+
+When documenting a new design, we recommend a 2-step approach:
+
+1. Use the short-form RFC template to outline your ideas and get early feedback.
+2. Once you have received sufficient feedback and consensus, you may use the longer-form design doc template to specify and discuss your design in more details.
+
+In order to contribute a feature to Open-IM-Server you'll need to go through the following steps:
+
++ Discuss your idea with the appropriate [working groups](https://join.slack.com/t/openimsdk/shared_invite/zt-1tmoj26uf-_FDy3dowVHBiGvLk9e5Xkg) on the working group's Slack channel.
++ Once there is general agreement that the feature is useful, create a GitHub issue to track the discussion. The issue should include information about the requirements and use cases that it is trying to address.
++ Include a discussion of the proposed design and technical details of the implementation in the issue.
+
+But keep in mind that there is no guarantee of it being accepted and so it is usually best to get agreement on the idea/design before time is spent coding it. However, sometimes seeing the exact code change can help focus discussions, so the choice is up to you.
+
+## Getting Started
+
+To propose PR for the Open-IM-Server item, we assume you have registered a GitHub ID. Then you could finish the preparation in the following steps:
+
+1. Fork the repository(Open-IM-Server)
+
+2. **CLONE** your own repository to main locally. Use `git clone https://github.com/<your-username>/Open-IM-Server.git` to clone repository to your local machine. Then you can create new branches to finish the change you wish to make.
+
+3. **Set Remote** upstream to be `https://github.com/OpenIMSDK/Open-IM-Server.git` using the following two commands:
+
+   ```bash
+   ❯ git remote add upstream https://github.com/OpenIMSDK/Open-IM-Server.git
+   ❯ git remote set-url --push upstream no-pushing
+   ```
+
+   With this remote setting, you can check your git remote configuration like this:
+
+   ```bash
+   ❯ git remote -v
+   origin     https://github.com/<your-username>/Open-IM-Server.git (fetch)
+   origin     https://github.com/<your-username>/Open-IM-Server.git (push)
+   upstream   https://github.com/OpenIMSDK/Open-IM-Server.git (fetch)
+   upstream   no-pushing (push)
+   ```
+
+   Adding this, we can easily synchronize local branches with upstream branches.
+
+4. Create a new branch for your changes (use a descriptive name, such as `fix-bug-123` or `add-new-feature`).
+
+   ```bash
+   ❯ cd Open-IM-Server
+   ❯ git fetch upstream
+   ❯ git checkout upstream/main
+   ```
+
+   Create a new branch: 
+
+   ```bash
+   ❯ git checkout -b <new-branch>
+   ```
+
+   Make any change on the `new-branch` then use [Makefile](./Makefile) build and test your codes.
+
+5. **Commit your changes** to your local branch, lint before committing and commit with sign-off
+
+   ```bash
+   ❯ git rebase upstream/main
+   ❯ make lint	  # golangci-lint run -c .golangci.yml
+   ❯ git add -A  # add changes to staging
+   ❯ git commit -a -s -m "message for your changes" # -s adds a Signed-off-by trailer
+   ```
+
+6. **Push your branch**  to your forked repository, it is recommended to have only one commit for a PR.
+
+   ```bash
+   # sync up with upstream
+   ❯ git fetch upstream main
+   ❯ git rebase upstream/main
+   ❯ 
+   ❯ git rebase -i	<commit-id> # rebase with interactive mode to squash your commits into a single one
+   ❯ git push # push to the remote repository, if it's a first time push, run git push --set-upstream origin <new-branch># sync up with upstream
+   ❯ git fetch upstream main
+   git rebase upstream/main
+   
+   ❯ git rebase -i	<commit-id> # rebase with interactive mode to squash your commits into a single one
+   ❯ git push # push to the remote repository, if it's a first time push, run git push --set-upstream origin <new-branch>
+   ```
+
+   You can also use `git commit -s --amend && git push -f` to update modifications on the previous commit.
+
+   If you have developed multiple features in the same branch, you should create PR separately by rebasing to the main branch between each push:
+
+   ```bash
+   # create new branch, for example git checkout -b feature/infra
+   ❯ git checkout -b <new branch>
+   # update some code, feature1
+   ❯ git add -A
+   ❯ git commit -m -s "feat: feature one"
+   ❯ git push # if it's first time push, run git push --set-upstream origin <new-branch>
+   # then create pull request, and merge
+   # update some new feature, feature2, rebase main branch first.
+   ❯ git rebase upstream/main # rebase the current branch to upstream/main branch
+   ❯ git add -A
+   ❯ git commit -m -s "feat: feature two"
+   # then create pull request, and merge
+   ```
+
+7. **Open a pull request** to `OpenIMSDK/Open-IM-Server:main`
+
+   It is recommended to review your changes before filing a pull request. Check if your code doesn't conflict with the main branch and no redundant code is included.
+
+## Style and Specification
+
+We divide the problem into security and general problems:
+
+#### Reporting security issues
+
+Security issues are always treated seriously. As our usual principle, we discourage anyone to spread security issues. If you find a security issue of Open-IM-Server, please do not discuss it in public and even do not open a public issue.
+
+Instead we encourage you to send us a private email to winxu81@gmail.com to report this.
+
+#### Reporting general issues
+
+To be honest, we regard every user of Open-IM-Serveras a very kind contributor. After experiencing Open-IM-Server, you may have some feedback for the project. Then feel free to open an issue via [NEW ISSUE](https://github.com/OpenIMSDK/Open-IM-Server/issues/new/choose).
+
+Since we collaborate project Open-IM-Server in a distributed way, we appreciate **WELL-WRITTEN**, **DETAILED**, **EXPLICIT** issue reports. To make the communication more efficient, we wish everyone could search if your issue is an existing one in the searching list. If you find it existing, please add your details in comments under the existing issue instead of opening a brand new one.
+
+To make the issue details as standard as possible, we setup an [ISSUE TEMPLATE](https://github.com/OpenIMSDK/.github/tree/main/.github/ISSUE_TEMPLATE) for issue reporters. You can find three kinds of issue templates there: question, bug report and feature request. Please **BE SURE** to follow the instructions to fill fields in template.
+
+**There are a lot of cases when you could open an issue:**
+
++ bug report
++ feature request
++ Open-IM-Server performance issues 
++ feature proposal
++ feature design
++ help wanted
++ doc incomplete
++ test improvement
++ any questions on Open-IM-Server project 
++ and so on 
+
+Also, we must be reminded when submitting a new question about Open-IM-Server, please remember to remove the sensitive data from your post. Sensitive data could be password, secret key, network locations, private business data and so on.
+
+#### Commit Rules
+
+Actually in Open-IM-Server, we take two rules serious when committing:
+
+**🥇 Commit Message:**
+
+Commit message could help reviewers better understand what the purpose of submitted PR is. It could help accelerate the code review procedure as well. We encourage contributors to use **EXPLICIT** commit message rather than ambiguous message. In general, we advocate the following commit message type:
+
+We use [Semantic Commits](https://www.conventionalcommits.org/en/v1.0.0/) to make it easier to understand what a commit does and to build pretty changelogs. Please use the following prefixes for your commits:
+
++ `docs: xxxx`. For example, "docs: add docs about storage installation".
++ `feature: xxxx`.For example, "feature: make result show in sorted order".
++ `bugfix: xxxx`. For example, "bugfix: fix panic when input nil parameter".
++ `style: xxxx`. For example, "style: format the code style of Constants.java".
++ `refactor: xxxx.` For example, "refactor: simplify to make codes more readable".
++ `test: xxx`. For example, "test: add unit test case for func InsertIntoArray".
++ `chore: xxx.` For example, "chore: integrate travis-ci". It's the type of mantainance change.
++ other readable and explicit expression ways.
+
+On the other side, we discourage contributors from committing message like the following ways:
+
++ ~~fix bug~~
++ ~~update~~
++ ~~add doc~~
+
+**🥈 Commit Content:**
+
+Commit content represents all content changes included in one commit. We had better include things in one single commit which could support reviewer's complete review without any other commits' help.
+
+In another word, contents in one single commit can pass the CI to avoid code mess. In brief, there are two minor rules for us to keep in mind:
+
+1. avoid very large change in a commit.
+2. complete and reviewable for each commit.
+3. words are written in lowercase English, not uppercase English or other languages such as Chinese.
+
+No matter what the commit message, or commit content is, we do take more emphasis on code review.
+
+An example for this could be:
 
-### 2. Clone the Repository
-Clone the repository you forked to your local machine:
 ```bash
-git clone https://github.com/your-username/open-im-server.git
+❯ git commit -a -s -m "docs: add a new section to the README"
 ```
 
-### 3. Set Upstream Remote
-Add the original repository as a remote upstream to track updates:
+#### PR Description
+
+PR is the only way to make change to Open-IM-Server project files. To help reviewers better get your purpose, PR description could not be too detailed. We encourage contributors to follow the [PR template](https://github.com/OpenIMSDK/.github/tree/main/.github/PULL_REQUEST_TEMPLATE.md) to finish the pull request.
+
+You can find some very formal PR in [RFC](https://github.com/OpenIMSDK/Open-IM-Server/issues?q=is%3Aissue+is%3Aopen+RFC+label%3ARFC) issues and learn about them.
+
+**📖 Opening PRs:**
+
++ As long as you are working on your PR, please mark it as a draft
++ Please make sure that your PR is up-to-date with the latest changes in `main`
++ Mention the issue that your PR is addressing (Fix: #{ID_1}, #{ID_2})
++ Make sure that your PR passes all checks
+
+**🈴 Reviewing PRs:**
+
++ Be respectful and constructive 
++ Assign yourself to the PR 
++ Check if all checks are passing
++ Suggest changes instead of simply commenting on found issues
++ If you are unsure about something, ask the author
++ If you are not sure if the changes work, try them out
++ Reach out to other reviewers if you are unsure about something
++ If you are happy with the changes, approve the PR
++ Merge the PR once it has all approvals and the checks are passing
+
+**⚠️ DCO check:**
+
+We have a DCO check that runs on every pull request to ensure code quality and maintainability. This check verifies that the commit has been signed off, indicating that you have read and agreed to the provisions of the Developer Certificate of Origin. If you have not yet signed off on the commit, you can use the following command to sign off on the last commit you made:
+
 ```bash
-git remote add upstream https://github.com/openimsdk/open-im-server.git
+❯ git commit --amend --signoff
 ```
 
-### 4. Create an Issue
-Create a new issue in the original repository detailing the problem you encountered or the new feature you wish to add.
+Please note that signing off on a commit is a commitment that you have read and agreed to the provisions of the Developer Certificate of Origin. If you have not yet read this document, we strongly recommend that you take some time to read it carefully. If you have any questions about the content of this document, or if you need further assistance, please contact an administrator or relevant personnel.
 
-### 5. Create a New Branch
-Create a new branch off the main branch with a descriptive name and Issue ID, for example:
-```bash
-git checkout -b fix-bug-123
+You can also automate signing off your commits by adding the following to your `.zshrc` or `.bashrc`:
+
+```go
+git() {
+  if [ $# -gt 0 ] && [[ "$1" == "commit" ]] ; then
+     shift
+     command git commit --signoff "$@"
+  else
+     command git "$@"
+  fi
+}
 ```
 
-### 6. Commit Changes
-After making changes on your local branch, commit these changes:
-```bash
-git add .
-git commit -m "Describe your changes
 
- in detail"
-```
+#### Docs Contribution
 
-### 7. Push the Branch
-Push your branch back to your GitHub fork:
-```bash
-git push origin fix-bug-123
-```
+The documentation for Open-IM-Server includes:
 
-### 8. Create a Pull Request
-Go to your fork on GitHub and click the "Pull Request" button. Ensure the PR description is clear and links to the related issue.
++ [README.md](https://github.com/OpenIMSDK/Open-IM-Server/blob/main/README.md): This file includes the basic information and instructions for getting started with Open-IM-Server.
++ [CONTRIBUTING.md](https://github.com/OpenIMSDK/Open-IM-Server/blob/main/CONTRIBUTING.md): This file contains guidelines for contributing to Open-IM-Server's codebase, such as how to submit issues, pull requests, and code reviews.
++ [Official Documentation](https://doc.rentsoft.cn/): This is the official documentation for Open-IM-Server, which includes comprehensive information on all of its features, configuration options, and troubleshooting tips.
 
-### 9. Sign the CLA
-If this is your first time submitting a PR, you will need to reply in the comments of the PR:
-```
-I have read the CLA Document and I hereby sign the CLA
-```
+Please obey the following rules to better format the docs, which would greatly improve the reading experience.
 
-### Programming Standards
-Please refer to the following documents for detailed information on Go language programming standards:
-- [Go Coding Standards](https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/go-code.md)
-- [Code Conventions](https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/code-conventions.md)
+1. Please do not use Chinese punctuations in English docs, and vice versa.
+2. Please use upper case letters where applicable, like the first letter of sentences / headings, etc.
+3. Please specify a language for each Markdown code blocks, unless there's no associated languages.
+4. Please insert a whitespace between Chinese and English words.
+5. Please use the correct case for technical terms, such as using `HTTP` instead of http, `MySQL` rather than mysql, `Kubernetes` instead of kubernetes, etc.
+6. Please check if there's any typos in the docs before submitting PRs.
 
-### Logging Standards
-- **Do not use the standard `log` package**.
-- Use the `"github.com/openimsdk/tools/log"` package for logging, which supports multiple log levels: `debug`, `info`, `warn`, `error`.
-- **Error logs should only be printed in the function where they are first actively called** to prevent log duplication and ensure clear error context.
+## Engage to help anything
 
-### Exception and Error Handling
-- **Prohibit the use of `panic`**: The code should not use `panic` to avoid abrupt termination when encountering unrecoverable errors.
-- **Error Wrapping**: Use `"github.com/openimsdk/tools/errs"` to wrap errors, maintaining the integrity of error information and facilitating debugging.
-- **Error Propagation**: If a function cannot handle an error itself, it should return the error to the caller, rather than hiding or ignoring it.
+We choose GitHub as the primary place for Open-IM-Server to collaborate. So the latest updates of Open-IM-Server are always here. Although contributions via PR is an explicit way to help, we still call for any other ways.
+
++ reply to other's [issues](https://github.com/OpenIMSDK/Open-IM-Server/issues?q=is%3Aissue+is%3Aopen+sort%3Aupdated-desc) if you could;
++ help solve other user's problems;
++ help review other's [PR](https://github.com/OpenIMSDK/Open-IM-Server/pulls?q=is%3Apr+is%3Aopen+sort%3Aupdated-desc) design; 
++ discuss about Open-IM-Server to make things clearer;
++ advocate [Open-IM-Server](https://google.com/search?q=Open-IM-Server) technology beyond GitHub;
++ write blogs on Open-IM-Server and so on.
+
+In a word, **ANY HELP IS CONTRIBUTION.**
+
+## Release version
+
+Releases of Open-IM-Server are done using [Release Please](https://github.com/googleapis/release-please) and [GoReleaser](https://goreleaser.com/). The workflow looks like this:
+
+🎯 A PR is merged to the `main` branch:
+
++ Release please is triggered, creates or updates a new release PR
++ This is done with every merge to main, the current release PR is updated every time
+
+🎯 Merging the 'release please' PR to `main`:
+
++ Release please is triggered, creates a new release and updates the changelog based on the commit messages
++ GoReleaser is triggered, builds the binaries and attaches them to the release
++ Containers are created and pushed to the container registry
+
+With the next relevant merge, a new release PR will be created and the process starts again
+
+**👀 Manually setting the version:**
+
+If you want to manually set the version, you can create a PR with an empty commit message that contains the version number in the commit message. For example:
+
+Such a commit can get produced as follows: 
+
+````bash
+❯ git commit --allow-empty -m "chore: release 0.0.3" -m "Release-As: 0.0.3
+````
+
+## Contact Us
+
+We value close connections with our users, developers, and contributors here at Open-IM-Server. With a large community and maintainer team, we're always here to help and support you. Whether you're looking to join our community or have any questions or suggestions, we welcome you to get in touch with us.
+
+Our most recommended way to get in touch is through [Slack](https://join.slack.com/t/openimsdk/shared_invite/zt-1tmoj26uf-_FDy3dowVHBiGvLk9e5Xkg). Even if you're in China, Slack is usually not blocked by firewalls, making it an easy way to connect with us. Our Slack community is the ideal place to discuss and share ideas and suggestions with other users and developers of Open-IM-Server. You can ask technical questions, seek help, or share your experiences with other users of Open-IM-Server.
+
+In addition to Slack, we also offer the following ways to get in touch:
+
++ <a href="https://join.slack.com/t/openimsdk/shared_invite/zt-1tmoj26uf-_FDy3dowVHBiGvLk9e5Xkg" target="_blank"><img src="https://img.shields.io/badge/slack-%40OpenIMSDKCore-informational?logo=slack&style=flat-square"></a>:  We also have Slack channels for you to communicate and discuss. To join, visit https://slack.com/ and join our [👀 Open-IM-Server slack](https://join.slack.com/t/openimsdk/shared_invite/zt-1tmoj26uf-_FDy3dowVHBiGvLk9e5Xkg) team channel.
++ <a href="https://mail.google.com/mail/u/0/?fs=1&tf=cm&to=4closetool3@gmail.com" target="_blank"><img src="https://img.shields.io/badge/gmail-%40OOpenIMSDKCore?style=social&logo=gmail"></a>: Get in touch with us on [Gmail](winxu81@gmail.com). If you have any questions or issues that need resolving, or any suggestions and feedback for our open source projects, please feel free to contact us via email.
++ <a href="https://doc.rentsoft.cn/" target="_blank"><img src="https://img.shields.io/badge/%E5%8D%9A%E5%AE%A2-%40OpenIMSDKCore-blue?style=social&logo=Octopus%20Deploy"></a>: Read our [blog](https://doc.rentsoft.cn/). Our blog is a great place to stay up-to-date with Open-IM-Server projects and trends. On the blog, we share our latest developments, tech trends, and other interesting information.
++ <a href="https://github.com/OpenIMSDK/OpenIM-Docs/blob/main/docs/images/WechatIMG20.jpeg" target="_blank"><img src="https://img.shields.io/badge/%E5%BE%AE%E4%BF%A1-OpenIMSDKCore-brightgreen?logo=wechat&style=flat-square"></a>: Add [Wechat](https://github.com/OpenIMSDK/OpenIM-Docs/blob/main/docs/images/WechatIMG20.jpeg) and indicate that you are a user or developer of Open-IM-Server. We will process your request as soon as possible.
+
+Whether you're looking to join our community or have any questions or suggestions, we welcome you to get in touch with us.

Dockerfile

@@ -1,49 +1,31 @@
-# Use Go 1.21 Alpine as the base image for building the application
-FROM golang:1.21-alpine as builder
+# Build Stage
+FROM golang:1.20 AS builder
 
-# Define the base directory for the application as an environment variable
-ENV SERVER_DIR=/openim-server
+# Set go mod installation source and proxy
+ARG GO111MODULE=on
+ARG GOPROXY=https://goproxy.cn,direct
+ENV GO111MODULE=$GO111MODULE
+ENV GOPROXY=$GOPROXY
 
-# Set the working directory inside the container based on the environment variable
-WORKDIR $SERVER_DIR
-
-# Set the Go proxy to improve dependency resolution speed
-ENV GOPROXY=https://goproxy.io,direct
-
-# Copy all files from the current directory into the container
-COPY . .
+# Set up the working directory
+WORKDIR /openim/openim-server
 
+COPY go.mod go.sum ./
 RUN go mod download
 
-# Install Mage to use for building the application
-RUN go install github.com/magefile/mage@v1.15.0
+# Copy all files to the container
+ADD . .
 
-# Optionally build your application if needed
-RUN mage build
+RUN make clean
+RUN make build
 
-# Using Alpine Linux with Go environment for the final image
-FROM golang:1.21-alpine
+FROM ghcr.io/openim-sigs/openim-bash-image:latest
 
-# Install necessary packages, such as bash
-RUN apk add --no-cache bash
+WORKDIR ${SERVER_WORKDIR}
 
-# Set the environment and work directory
-ENV SERVER_DIR=/openim-server
-WORKDIR $SERVER_DIR
+# Copy scripts and binary files to the production image
+COPY --from=builder ${OPENIM_SERVER_CMDDIR} /openim/openim-server/scripts
+COPY --from=builder ${SERVER_WORKDIR}/config /openim/openim-server/config
+COPY --from=builder ${SERVER_WORKDIR}/_output/bin/platforms /openim/openim-server/_output/bin/platforms
 
-
-# Copy the compiled binaries and mage from the builder image to the final image
-COPY --from=builder $SERVER_DIR/_output $SERVER_DIR/_output
-COPY --from=builder $SERVER_DIR/config $SERVER_DIR/config
-COPY --from=builder /go/bin/mage /usr/local/bin/mage
-COPY --from=builder $SERVER_DIR/magefile_windows.go $SERVER_DIR/
-COPY --from=builder $SERVER_DIR/magefile_unix.go $SERVER_DIR/
-COPY --from=builder $SERVER_DIR/magefile.go $SERVER_DIR/
-COPY --from=builder $SERVER_DIR/start-config.yml $SERVER_DIR/
-COPY --from=builder $SERVER_DIR/go.mod $SERVER_DIR/
-COPY --from=builder $SERVER_DIR/go.sum $SERVER_DIR/
-
-RUN go get github.com/openimsdk/gomake@v0.0.14-alpha.5
-
-# Set the command to run when the container starts
-ENTRYPOINT ["sh", "-c", "mage start && tail -f /dev/null"]
+CMD ["bash","-c","${OPENIM_SERVER_CMDDIR}/docker_start_all.sh"]

Makefile

@@ -0,0 +1,202 @@
+# ==============================================================================
+# define the default goal
+#
+
+.DEFAULT_GOAL := help
+
+## all: Run tidy, gen, add-copyright, format, lint, cover, build ✨
+.PHONY: all
+all: tidy gen add-copyright format lint cover build
+
+# ==============================================================================
+# Build set
+
+ROOT_PACKAGE=github.com/OpenIMSDK/Open-IM-Server
+# TODO: This is version control for the future
+VERSION_PACKAGE=github.com/OpenIMSDK/Open-IM-Server/pkg/version
+
+# ==============================================================================
+# Includes
+
+include scripts/make-rules/common.mk	# make sure include common.mk at the first include line
+include scripts/make-rules/golang.mk
+include scripts/make-rules/image.mk
+include scripts/make-rules/copyright.mk
+include scripts/make-rules/gen.mk
+include scripts/make-rules/dependencies.mk
+include scripts/make-rules/tools.mk
+include scripts/make-rules/release.mk
+include scripts/make-rules/swagger.mk
+
+# ==============================================================================
+# Usage
+
+define USAGE_OPTIONS
+
+Options:
+
+  DEBUG            Whether or not to generate debug symbols. Default is 0.
+
+  BINS             Binaries to build. Default is all binaries under cmd.
+                   This option is available when using: make {build}(.multiarch)
+                   Example: make build BINS="openim-api openim-cmdutils".
+
+  PLATFORMS        Platform to build for. Default is linux_arm64 and linux_amd64.
+                   This option is available when using: make {build}.multiarch
+                   Example: make multiarch PLATFORMS="linux_s390x linux_mips64
+                   linux_mips64le darwin_amd64 windows_amd64 linux_amd64 linux_arm64".
+
+  V                Set to 1 enable verbose build. Default is 0.
+endef
+export USAGE_OPTIONS
+
+# ==============================================================================
+# Targets
+
+## build: Build binaries by default ✨
+.PHONY: build
+build:
+	@$(MAKE) go.build
+
+## multiarch: Build binaries for multiple platforms. See option PLATFORMS. ✨
+.PHONY: multiarch
+multiarch:
+	@$(MAKE) go.build.multiarch
+
+## install: Install deployment openim ✨
+.PHONY: install
+install:
+	@$(MAKE) go.install
+
+## check: Check OpenIM deployment ✨
+.PHONY: check
+check:
+	@$(MAKE) go.check
+
+## tidy: tidy go.mod ✨
+.PHONY: tidy
+tidy:
+	@$(GO) mod tidy
+
+## vendor: vendor go.mod ✨
+.PHONY: vendor
+vendor:
+	@$(GO) mod vendor
+
+## style: code style -> fmt,vet,lint ✨
+.PHONY: style
+style: fmt vet lint
+
+## fmt: Run go fmt against code. ✨
+.PHONY: fmt
+fmt:
+	@$(GO) fmt ./...
+
+## vet: Run go vet against code. ✨
+.PHONY: vet
+vet:
+	@$(GO) vet ./...
+
+## lint: Check syntax and styling of go sources. ✨
+.PHONY: lint
+lint:
+	@$(MAKE) go.lint
+
+## format: Gofmt (reformat) package sources (exclude vendor dir if existed). ✨
+.PHONY: format
+format:
+	@$(MAKE) go.format
+
+## test: Run unit test. ✨
+.PHONY: test
+test:
+	@$(MAKE) go.test
+
+## cover: Run unit test and get test coverage. ✨
+.PHONY: cover
+cover:
+	@$(MAKE) go.test.cover
+
+## updates: Check for updates to go.mod dependencies. ✨
+.PHONY: updates
+	@$(MAKE) go.updates
+
+## imports: task to automatically handle import packages in Go files using goimports tool. ✨
+.PHONY: imports
+imports:
+	@$(MAKE) go.imports
+
+## clean: Remove all files that are created by building. ✨
+.PHONY: clean
+clean:
+	@$(MAKE) go.clean
+
+## image: Build docker images for host arch. ✨
+.PHONY: image
+image:
+	@$(MAKE) image.build
+
+## image.multiarch: Build docker images for multiple platforms. See option PLATFORMS. ✨
+.PHONY: image.multiarch
+image.multiarch:
+	@$(MAKE) image.build.multiarch
+
+## push: Build docker images for host arch and push images to registry. ✨
+.PHONY: push
+push:
+	@$(MAKE) image.push
+
+## push.multiarch: Build docker images for multiple platforms and push images to registry. ✨
+.PHONY: push.multiarch
+push.multiarch:
+	@$(MAKE) image.push.multiarch
+
+## tools: Install dependent tools. ✨
+.PHONY: tools
+tools:
+	@$(MAKE) tools.install
+
+## gen: Generate all necessary files. ✨
+.PHONY: gen
+gen:
+	@$(MAKE) gen.run
+
+## swagger: Generate swagger document. ✨
+.PHONY: swagger
+swagger:
+	@$(MAKE) swagger.run
+
+## serve-swagger: Serve swagger spec and docs. ✨
+.PHONY: swagger.serve
+serve-swagger:
+	@$(MAKE) swagger.serve
+
+## verify-copyright: Verify the license headers for all files. ✨
+.PHONY: verify-copyright
+verify-copyright:
+	@$(MAKE) copyright.verify
+
+## add-copyright: Add copyright ensure source code files have license headers. ✨
+.PHONY: add-copyright
+add-copyright:
+	@$(MAKE) copyright.add
+
+## advertise: Project introduction, become a contributor ✨
+.PHONY: advertise
+advertise:
+	@$(MAKE) copyright.advertise
+
+## release: release the project ✨
+.PHONY: release
+release: release.verify release.ensure-tag
+	@scripts/release.sh
+
+## help: Show this help info. ✨
+.PHONY: help
+help: Makefile
+	$(call makehelp)
+
+## help-all: Show all help details info. ✨
+.PHONY: help-all
+help-all: go.help copyright.help tools.help image.help dependencies.help gen.help release.help swagger.help help
+	$(call makeallhelp)

README-zh_CN.md

@@ -0,0 +1,265 @@
+<h1 align="center" style="border-bottom: none">
+    <b>
+        <a href="https://doc.rentsoft.cn/">Open IM Server</a><br>
+    </b>
+    ⭐️  Open source Instant Messaging Server  ⭐️ <br>
+</h1>
+
+
+<p align=center>
+<a href="https://goreportcard.com/report/github.com/OpenIMSDK/Open-IM-Server"><img src="https://goreportcard.com/badge/github.com/OpenIMSDK/Open-IM-Server" alt="A+"></a>
+<a href="https://github.com/OpenIMSDK/Open-IM-Server/issues?q=is%3Aissue+is%3Aopen+sort%3Aupdated-desc+label%3A%22good+first+issue%22"><img src="https://img.shields.io/github/issues/OpenIMSDK/Open-IM-Server/good%20first%20issue?logo=%22github%22" alt="good first"></a>
+<a href="https://github.com/OpenIMSDK/Open-IM-Server"><img src="https://img.shields.io/github/stars/OpenIMSDK/Open-IM-Server.svg?style=flat&logo=github&colorB=deeppink&label=stars"></a>
+<a href="https://join.slack.com/t/openimsdk/shared_invite/zt-1tmoj26uf-_FDy3dowVHBiGvLk9e5Xkg"><img src="https://img.shields.io/badge/Slack-100%2B-blueviolet?logo=slack&amp;logoColor=white"></a>
+<a href="https://github.com/OpenIMSDK/Open-IM-Server/blob/main/LICENSE"><img src="https://img.shields.io/badge/license-Apache--2.0-green"></a>
+<a href="https://golang.org/"><img src="https://img.shields.io/badge/Language-Go-blue.svg"></a>
+</p>
+
+</p>
+
+<p align="center">
+    <a href="./README.md"><b>English</b></a> •
+    <a href="./README_zh-CN.md"><b>中文</b></a>
+</p>
+
+</p>
+
+## Open-IM-Server 是什么
+
+Open-IM-Server 是一款即时通讯服务器，使用纯 Golang 开发，采用 JSON over WebSocket 传输协议。在 Open-IM-Server 中，所有东西都是消息，因此您可以轻松扩展自定义消息，而无需修改服务器代码。使用微服务架构，Open-IM-Server 可以使用集群进行部署。通过在服务器上部署 Open-IM-Server，开发人员可以快速地将即时通讯和实时网络功能集成到自己的应用程序中，并确保业务数据的安全性和隐私性。
+
+Open-IM-Server并不是一个独立的产品，本身不包含账号的注册和登录服务。
+为方便大家测试，我们开源了包括登录注册功能的 [chat 仓库](https://github.com/OpenIMSDK/chat)，chat 业务服务端和 Open-IM-Server 一起部署，即可搭建一个聊天产品。
+
+## 特点
+
++ 开源
++ 易于集成
++ 良好的可扩展性
++ 高性能
++ 轻量级
++ 支持多种协议
+
+## 社区
+
++ 访问中文官方网站：[OpenIM中文开发文档](https://doc.rentsoft.cn/)
+
+## 快速开始
+
+### 使用 docker-compose 部署
+
+1. 克隆项目
+
+```
+git clone https://github.com/OpenIMSDK/Open-IM-Server 
+cd Open-IM-Server
+git checkout release-v3.0 #or other release branch
+```
+
+2. 修改 .env
+
+```
+此处主要修改相关组件密码
+USER=root #不用修改
+PASSWORD=openIM123  #8位以上的数字和字母组合密码，密码对redis mysql mongo生效，以及config/config.yaml中的accessSecret
+ENDPOINT=http://127.0.0.1:10005 #minio对外服务的ip和端口，或用域名storage.xx.xx，app要能访问到此ip和端口或域名，
+API_URL=http://127.0.0.1:10002/object/ #app要能访问到此ip和端口或域名，
+DATA_DIR=./  #指定大磁盘目录
+```
+
+3. 部署和启动
+
+注意：此命令只能执行一次，它会根据.env 中的 PASSWORD 变量修改 docker-compose 中组件密码，并修改 config/config.yaml 中的组件密码
+如果.env 中的密码变了，需要先 docker-compose down ; rm components -rf 后再执行此命令。
+
+```
+chmod +x install_im_server.sh;
+./install_im_server.sh;
+```
+
+4. 检查服务
+
+```
+cd scripts;
+./docker_check_service.sh
+```
+
+![https://github.com/OpenIMSDK/Open-IM-Server/blob/main/docs/images/docker_build.png](https://github.com/OpenIMSDK/Open-IM-Server/blob/main/docs/images/docker_build.png)
+
+### 使用源码编译
+
+1. Go 1.18或更高版本。
+
+2. 克隆
+
+   ```
+   git clone https://github.com/OpenIMSDK/Open-IM-Server 
+   cd Open-IM-Server
+   git checkout release-v3.0 #or other release branch
+   ```
+
+3. 编译
+
+   ```
+   cd Open-IM-server/scripts
+   chmod +x *.sh
+   ./build_all_service.sh
+   ```
+
+所有服务已成功构建如图所示
+
+![编译成功](https://github.com/OpenIMSDK/Open-IM-Server/blob/main/docs/images/build.png)
+
+### 组件配置说明
+
+config/config.yaml中针对存储组件有详细的配置说明
+
++ Zookeeper
+  + 用于RPC 服务发现和注册，支持集群。
+  
+    ````
+    ```
+    zookeeper:
+      schema: openim                          #不建议修改
+      address: [ 127.0.0.1:2181 ]             #地址
+      username:                               #用户名
+      password:                               #密码
+    ```
+    ````
+  
+    
+  
++ MySQL
+  
+  + 用于存储用户、关系链、群组，支持数据库主备。
+  
+    ```
+    mysql:
+      address: [ 127.0.0.1:13306 ]            #地址
+      username: root                          #用户名
+      password: openIM123                     #密码
+      database: openIM_v2                     #不建议修改
+      maxOpenConn: 1000                       #最大连接数
+      maxIdleConn: 100                        #最大空闲连接数
+      maxLifeTime: 60                         #连接可以重复使用的最长时间（秒）
+      logLevel: 4                             #日志级别 1=slient 2=error 3=warn 4=info
+      slowThreshold: 500                      #慢语句阈值 （毫秒）
+    ```
+  
+    
+  
++ Mongo
+  + 用于存储离线消息，支持mongo分片集群。
+  
+    ```
+    mongo:
+      uri:                                    #不为空则直接使用该值
+      address: [ 127.0.0.1:37017 ]            #地址
+      database: openIM                        #mongo db 默认即可
+      username: root                          #用户名
+      password: openIM123                     #密码
+      maxPoolSize: 100                        #最大连接数
+    ```
+  
++ Redis
+  + 用于存储消息序列号、最新消息、用户token及mysql缓存，支持集群部署。
+  
+    ```
+    redis:
+      address: [ 127.0.0.1:16379 ]            #地址
+      username:                               #用户名
+      password: openIM123                     #密码
+    ```
+  
++ Kafka
+  + 用于消息队列，用于消息解耦，支持集群部署。
+  
+    ```
+    kafka:
+      username:                               #用户名
+      password:                               #密码
+      addr: [ 127.0.0.1:9092 ]                #地址
+      latestMsgToRedis:
+        topic: "latestMsgToRedis"
+      offlineMsgToMongo:
+        topic: "offlineMsgToMongoMysql"
+      msgToPush:
+        topic: "msqToPush"
+      msgToModify:
+        topic: "msgToModify"
+      consumerGroupID:
+        msgToRedis: redis
+        msgToMongo: mongo
+        msgToMySql: mysql
+        msgToPush: push
+        msgToModify: modify
+    ```
+
+### 启停服务
+
+启动服务
+
+```
+./start_all.sh;
+```
+
+检查服务
+
+```
+./check_all.sh
+```
+
+停止服务
+
+```
+./stop_all.sh
+```
+
+### 开放 IM 端口
+
+| TCP 端口  | 说明                                                  | 操作                                    |
+| --------- | ----------------------------------------------------- | --------------------------------------- |
+| TCP:10001 | ws 协议，消息端口，如消息发送、推送等，用于客户端 SDK | 端口放行或 nginx 反向代理，并关闭防火墙 |
+| TCP:10002 | api 端口，如用户、好友、群组、消息等接口。            | 端口放行或 nginx 反向代理，并关闭防火墙 |
+| TCP:10005 | 选择 minio 存储时需要(openIM 默认使用 minio 存储)     | 端口放行或 nginx 反向代理，并关闭防火墙 |
+
+### 开放 Chat 端口
+
+| TCP 端口  | 说明                     | 操作                                    |
+| --------- | ------------------------ | --------------------------------------- |
+| TCP:10008 | 业务系统，如注册、登录等 | 端口放行或 nginx 反向代理，并关闭防火墙 |
+| TCP:10009 | 管理后台，如统计、封号等 | 端口放行或 nginx 反向代理，并关闭防火墙 |
+
+## APP和OpenIM关系
+
+OpenIM 是开源的即时通讯组件，它并不是一个独立的产品，此图展示了AppServer、AppClient、Open-IM-Server以及Open-IM-SDK之间的关系
+
+![https://github.com/OpenIMSDK/Open-IM-Server/blob/main/docs/open-im-server.png](https://github.com/OpenIMSDK/Open-IM-Server/blob/main/docs/images/open-im-server.png)
+
+## 整体架构
+
+![https://github.com/OpenIMSDK/Open-IM-Server/blob/main/docs/Architecture.jpg](https://github.com/OpenIMSDK/Open-IM-Server/blob/main/docs/images/Architecture.jpg)
+
+## 开始开发 OpenIM
+
+[社区存储库](https://github.com/OpenIMSDK/community)包含有关从源代码构建 Kubernetes、如何贡献代码和文档。
+
+## 贡献
+
+欢迎对该项目进行贡献！请参见 [CONTRIBUTING.md](http://CONTRIBUTING.md) 了解详细信息。
+
+## 社区会议
+
+我们希望任何人都能参与我们的社区，我们提供礼品和奖励，并欢迎您每周四晚上加入我们。
+
+我们在 [GitHub 讨论](https://github.com/OpenIMSDK/Open-IM-Server/discussions/categories/meeting) 中记录每个 [两周会议](https://github.com/OpenIMSDK/Open-IM-Server/issues/381)，我们的记录写在 [Google 文档](https://docs.google.com/document/d/1nx8MDpuG74NASx081JcCpxPgDITNTpIIos0DS6Vr9GU/edit?usp=sharing) 中。
+
+## 谁在使用 Open-IM-Server
+
+[用户案例研究](https://github.com/OpenIMSDK/community/blob/main/ADOPTERS.md) 页面包括该项目的用户列表。您可以留下 [📝评论](https://github.com/OpenIMSDK/Open-IM-Server/issues/379) 让我们知道您的用例。
+
+![https://github.com/OpenIMSDK/OpenIM-Docs/blob/main/docs/images/WechatIMG20.jpeg](https://github.com/OpenIMSDK/OpenIM-Docs/blob/main/docs/images/WechatIMG20.jpeg)
+
+## 许可证
+
+Open-IM-Server 使用 Apache 2.0 许可证。有关详情，请参阅 LICENSE 文件。

README.md

@@ -1,142 +1,257 @@
 <p align="center">
-    <a href="https://openim.io">
+    <a href="https://www.openim.online">
         <img src="./assets/logo-gif/openim-logo.gif" width="60%" height="30%"/>
     </a>
 </p>
 
-<div align="center">
+<h3 align="center" style="border-bottom: none">
+    ⭐️  Open source Instant Messaging Server ⭐️ <br>
+<h3>
 
-[![Stars](https://img.shields.io/github/stars/openimsdk/open-im-server?style=for-the-badge&logo=github&colorB=ff69b4)](https://github.com/openimsdk/open-im-server/stargazers)
-[![Forks](https://img.shields.io/github/forks/openimsdk/open-im-server?style=for-the-badge&logo=github&colorB=blue)](https://github.com/openimsdk/open-im-server/network/members)
-[![Codecov](https://img.shields.io/codecov/c/github/openimsdk/open-im-server?style=for-the-badge&logo=codecov&colorB=orange)](https://app.codecov.io/gh/openimsdk/open-im-server)
-[![Go Report Card](https://goreportcard.com/badge/github.com/openimsdk/open-im-server?style=for-the-badge)](https://goreportcard.com/report/github.com/openimsdk/open-im-server)
-[![Go Reference](https://img.shields.io/badge/Go%20Reference-blue.svg?style=for-the-badge&logo=go&logoColor=white)](https://pkg.go.dev/github.com/openimsdk/open-im-server/v3)
-[![License](https://img.shields.io/badge/license-Apache--2.0-green?style=for-the-badge)](https://github.com/openimsdk/open-im-server/blob/main/LICENSE)
-[![Slack](https://img.shields.io/badge/Slack-500%2B-blueviolet?style=for-the-badge&logo=slack&logoColor=white)](https://join.slack.com/t/openimsdk/shared_invite/zt-22720d66b-o_FvKxMTGXtcnnnHiMqe9Q)
-[![Best Practices](https://img.shields.io/badge/Best%20Practices-purple?style=for-the-badge)](https://www.bestpractices.dev/projects/8045)
-[![Good First Issues](https://img.shields.io/github/issues/openimsdk/open-im-server/good%20first%20issue?style=for-the-badge&logo=github)](https://github.com/openimsdk/open-im-server/issues?q=is%3Aissue+is%3Aopen+sort%3Aupdated-desc+label%3A%22good+first+issue%22)
-[![Language](https://img.shields.io/badge/Language-Go-blue.svg?style=for-the-badge&logo=go&logoColor=white)](https://golang.org/)
 
-     
+<p align=center>
+<a href="https://goreportcard.com/report/github.com/OpenIMSDK/Open-IM-Server"><img src="https://goreportcard.com/badge/github.com/OpenIMSDK/Open-IM-Server" alt="A+"></a>
+<a href="https://github.com/OpenIMSDK/Open-IM-Server/issues?q=is%3Aissue+is%3Aopen+sort%3Aupdated-desc+label%3A%22good+first+issue%22"><img src="https://img.shields.io/github/issues/OpenIMSDK/Open-IM-Server/good%20first%20issue?logo=%22github%22" alt="good first"></a>
+<a href="https://github.com/OpenIMSDK/Open-IM-Server"><img src="https://img.shields.io/github/stars/OpenIMSDK/Open-IM-Server.svg?style=flat&logo=github&colorB=deeppink&label=stars"></a>
+<a href="https://join.slack.com/t/openimsdk/shared_invite/zt-1tmoj26uf-_FDy3dowVHBiGvLk9e5Xkg"><img src="https://img.shields.io/badge/Slack-300%2B-blueviolet?logo=slack&amp;logoColor=white"></a>
+<a href="https://github.com/OpenIMSDK/Open-IM-Server/blob/main/LICENSE"><img src="https://img.shields.io/badge/license-Apache--2.0-green"></a>
+<a href="https://golang.org/"><img src="https://img.shields.io/badge/Language-Go-blue.svg"></a>
+</p>
+
+</p>
+
 <p align="center">
-  <a href="./README.md">English</a> · 
-  <a href="./README_zh_CN.md">中文</a> · 
-  <a href="./docs/readme/README_uk.md">Українська</a> · 
-  <a href="./docs/readme/README_cs.md">Česky</a> · 
-  <a href="./docs/readme/README_hu.md">Magyar</a> · 
-  <a href="./docs/readme/README_es.md">Español</a> · 
-  <a href="./docs/readme/README_fa.md">فارسی</a> · 
-  <a href="./docs/readme/README_fr.md">Français</a> · 
-  <a href="./docs/readme/README_de.md">Deutsch</a> · 
-  <a href="./docs/readme/README_pl.md">Polski</a> · 
-  <a href="./docs/readme/README_id.md">Indonesian</a> · 
-  <a href="./docs/readme/README_fi.md">Suomi</a> · 
-  <a href="./docs/readme/README_ml.md">മലയാളം</a> · 
-  <a href="./docs/readme/README_ja.md">日本語</a> · 
-  <a href="./docs/readme/README_nl.md">Nederlands</a> · 
-  <a href="./docs/readme/README_it.md">Italiano</a> · 
-  <a href="./docs/readme/README_ru.md">Русский</a> · 
-  <a href="./docs/readme/README_pt_BR.md">Português (Brasil)</a> · 
-  <a href="./docs/readme/README_eo.md">Esperanto</a> · 
-  <a href="./docs/readme/README_ko.md">한국어</a> · 
-  <a href="./docs/readme/README_ar.md">العربي</a> · 
-  <a href="./docs/readme/README_vi.md">Tiếng Việt</a> · 
-  <a href="./docs/readme/README_da.md">Dansk</a> · 
-  <a href="./docs/readme/README_el.md">Ελληνικά</a> · 
-  <a href="./docs/readme/README_tr.md">Türkçe</a>
+    <a href="./README.md"><b> English </b></a> •
+    <a href="./README-zh_CN.md"><b> 中文 </b></a>
 </p>
 
-
-</div>
-
 </p>
 
-## :busts_in_silhouette: Join Our Community
+## What is Open-IM-Server
 
-+ 💬 [Follow us on Twitter](https://twitter.com/founder_im63606)
-+ 🚀 [Join our Slack](https://join.slack.com/t/openimsdk/shared_invite/zt-2ijy1ys1f-O0aEDCr7ExRZ7mwsHAVg9A)
-+ :eyes: [Join our WeChat Group](https://openim-1253691595.cos.ap-nanjing.myqcloud.com/WechatIMG20.jpeg)
+Open-IM-Server is an instant messaging server developed using pure Golang, adopting JSON over WebSocket as the communication protocol. In Open-IM-Server, everything is a message, so you can easily extend custom messages without modifying the server code. With a microservice architecture, Open-IM-Server can be deployed using clusters. By deploying Open-IM-Server on a server, developers can quickly integrate instant messaging and real-time networking features into their applications, ensuring the security and privacy of business data.
 
-## Ⓜ️ About OpenIM
+Open-IM-Server is not a standalone product and does not include account registration and login services. For your convenience, we have open-sourced the [chat repository](https://github.com/OpenIMSDK/chat) which includes login and registration functionality. By deploying the chat business server alongside Open-IM-Server, a chat product can be set up.
 
-Unlike standalone chat applications such as Telegram, Signal, and Rocket.Chat, OpenIM offers an open-source instant messaging solution designed specifically for developers rather than as a directly installable standalone chat app. Comprising OpenIM SDK and OpenIM Server, it provides developers with a complete set of tools and services to integrate instant messaging functions into their applications, including message sending and receiving, user management, and group management. Overall, OpenIM aims to provide developers with the necessary tools and framework to implement efficient instant messaging solutions in their applications.
+## Features
 
-![App-OpenIM Relationship](./docs/images/oepnim-design.png)
+- Open source
+- Easy to integrate
+- Excellent scalability
+- High performance
+- Lightweight
+- Supports multiple protocols
 
-## 🚀 Introduction to OpenIMSDK
+## Community
+- Visit the official website: [OpenIM  Developer Documentation](https://www.openim.online/)
 
-**OpenIMSDK**, designed for **OpenIMServer**, is an IM SDK created specifically for integration into client applications. It supports various functionalities and modules:
+## Quick Start
 
-+ 🌟 Main Features:
-  - 📦 Local Storage
-  - 🔔 Listener Callbacks
-  - 🛡️ API Wrapping
-  - 🌐 Connection Management
+### Deploying with docker-compose
 
-+ 📚 Main Modules:
-  1. 🚀 Initialization and Login
-  2. 👤 User Management
-  3. 👫 Friends Management
-  4. 🤖 Group Functions
-  5. 💬 Session Handling
+1. Clone the project
 
-Built with Golang and supports cross-platform deployment to ensure a consistent integration experience across all platforms.
+```bash
+# choose what you need
+BRANCH=release-v3.0
+git clone -b $BRANCH https://github.com/OpenIMSDK/Open-IM-Server openim && export openim=$(pwd)/openim && cd $openim && make build
+```
 
-👉 **[Explore the GO SDK](https://github.com/openimsdk/openim-sdk-core)**
+2. Modify .env
 
-## 🌐 Introduction to OpenIMServer 
+```bash
+USER=root #no need to modify
+PASSWORD=openIM123  #A combination of 8 or more numbers and letters, this password applies to redis, mysql, mongo, as well as accessSecret in config/config.yaml
+ENDPOINT=http://127.0.0.1:10005 #minio's external service IP and port, or use the domain name storage.xx.xx, the app must be able to access this IP and port or domain,
+API_URL=http://127.0.0.1:10002/object/ #the app must be able to access this IP and port or domain,
+DATA_DIR=./  #designate large disk directory
+```
 
-+ **OpenIMServer** features include:
-  - 🌐 Microservices Architecture: Supports cluster mode, including a gateway and multiple rpc services.
-  - 🚀 Diverse Deployment Options: Supports source code, Kubernetes, or Docker deployment.
-  - Massive User Support: Supports large-scale groups with hundreds of thousands, millions of users, and billions of messages.
+3. Deploy and start
 
-### Enhanced Business Functions:
+> **Note**
+> This command can only be executed once. It will modify the component passwords in docker-compose based on the PASSWORD variable in .env, and modify the component passwords in config/config.yaml. If the password in .env changes, you need to first execute docker-compose down; rm components -rf and then execute this command.
 
-+ **REST API**: Provides a REST API for business systems to enhance functionality, such as group creation and message pushing through backend interfaces.
+```
+make install
+```
 
-+ **Webhooks**: Expands business forms through callbacks, sending requests to business servers before or after certain events.
+4. Check the service
 
-  ![Overall Architecture](./docs/images/architecture-layers.png)
+```bash
+make check
+```
 
-## :rocket: Quick Start
-
-Experience online for iOS/Android/H5/PC/Web:
-
-👉 **[OpenIM Online Demo](https://www.openim.io/en/commercial)**
-
-To facilitate user experience, we offer various deployment solutions. You can choose your preferred deployment method from the list below:
-
-+ **[Source Code Deployment Guide](https://docs.openim.io/guides/gettingStarted/imSourceCodeDeployment)**
-+ **[Docker Deployment Guide](https://docs.openim.io/guides/gettingStarted/dockerCompose)**
-
-## System Support
-
-Supports Linux, Windows, Mac systems, and ARM and AMD CPU architectures.
-
-## :link: Links
-
-  + **[Developer Manual](https://docs.openim.io/)**
-  + **[Changelog](https://github.com/openimsdk/open-im-server/blob/main/CHANGELOG.md)**
-
-## :writing_hand: How to Contribute
-
-We welcome contributions of any kind! Please make sure to read our [Contributor Documentation](https://github.com/openimsdk/open-im-server/blob/main/CONTRIBUTING.md) before submitting a Pull Request.
-
-  + **[Report a Bug](https://github.com/openimsdk/open-im-server/issues/new?assignees=&labels=bug&template=bug_report.md&title=)**
-  + **[Suggest a Feature](https://github.com/openimsdk/open-im-server/issues/new?assignees=&labels=enhancement&template=feature_request.md&title=)**
-  + **[Submit a Pull Request](https://github.com/openimsdk/open-im-server/pulls)**
-
-Thank you for contributing to building a powerful instant messaging solution!
-
-## :closed_book: License
-
-OpenIMSDK is available under the Apache License 2.0. See the [LICENSE file](https://github.com/openimsdk/open-im-server/blob/main/LICENSE) for more information. 
+![https://github.com/OpenIMSDK/Open-IM-Server/blob/main/docs/images/docker_build.png](https://github.com/OpenIMSDK/Open-IM-Server/blob/main/docs/images/docker_build.png)
 
 
 
-## 🔮 Thanks to our contributors!
+### Compile from source
 
-<a href="https://github.com/openimsdk/open-im-server/graphs/contributors">
-  <img src="https://contrib.rocks/image?repo=openimsdk/open-im-server" />
-</a>
+Ur need `Go 1.18` or higher version, and `make`.
+
+Version Details: https://github.com/OpenIMSDK/Open-IM-Server/blob/main/docs/conversions/version.md
+
+```bash
+# choose what you need
+BRANCH=release-v3.1
+git clone -b $BRANCH https://github.com/OpenIMSDK/Open-IM-Server openim && export openim=$(pwd)/openim && cd $openim && make build
+```
+Read about the [OpenIM Version Policy](https://github.com/OpenIMSDK/Open-IM-Server/blob/main/docs/conversions/version.md)
+
+`make help` to help you see the instructions supported by OpenIM.
+
+All services have been successfully built as shown in the figure
+
+![Successful Compilation](https://github.com/OpenIMSDK/Open-IM-Server/blob/main/docs/images/build.png)
+
+### Component Configuration Instructions
+
+The config/config.yaml file has detailed configuration instructions for the storage components.
+
+- Zookeeper
+
+  - Used for RPC service discovery and registration, cluster support.
+
+    ```
+    zookeeper:
+      schema: openim                          #Not recommended to modify
+      address: [ 127.0.0.1:2181 ]             #address
+      username:                               #username
+      password:                               #password
+    ```
+
+- MySQL
+
+  - Used for storing users, relationships, and groups, supports master-slave database.
+
+    ```
+    mysql:
+      address: [ 127.0.0.1:13306 ]            #address
+      username: root                          #username
+      password: openIM123                     #password
+      database: openIM_v2                     #Not recommended to modify
+      maxOpenConn: 1000                       #maximum connection
+      maxIdleConn: 100                        #maximum idle connection
+      maxLifeTime: 60                         #maximum time a connection can be reused (seconds)
+      logLevel: 4                             #log level 1=slient 2=error 3=warn 4=info
+      slowThreshold: 500                      #slow statement threshold (milliseconds)
+    ```
+
+- Mongo
+
+  - Used for storing offline messages, supports mongo sharded clusters.
+
+    ```
+    mongo:
+      uri:                                    #Use this value directly if not empty
+      address: [ 127.0.0.1:37017 ]            #address
+      database: openIM                        #default mongo db
+      username: root                          #username
+      password: openIM123                     #password
+      maxPoolSize: 100                        #maximum connections
+    ```
+
+- Redis
+
+  - Used for storing message sequence numbers, latest messages, user tokens, and mysql cache, supports cluster deployment.
+
+    ```
+    redis:
+      address: [ 127.0.0.1:16379 ]            #address
+      username:                               #username
+      password: openIM123                     #password
+    ```
+
+- Kafka
+
+  - Used for message queues, for message decoupling, supports cluster deployment.
+
+    ```
+    kafka:
+      username:                               #username
+      password:                               #password
+      addr: [ 127.0.0.1:9092 ]                #address
+      latestMsgToRedis:
+        topic: "latestMsgToRedis"
+      offlineMsgToMongo:
+        topic: "offlineMsgToMongoMysql"
+      msgToPush:
+        topic: "msqToPush"
+      msgToModify:
+        topic: "msgToModify"
+      consumerGroupID:
+        msgToRedis: redis
+        msgToMongo: mongo
+        msgToMySql: mysql
+        msgToPush: push
+        msgToModify: modify
+    ```
+
+### Start and Stop Services
+
+Start services
+
+```
+./start_all.sh;
+```
+
+Check services
+
+```
+./check_all.sh
+```
+
+Stop services
+
+```
+./stop_all.sh
+```
+
+### Open IM Ports
+
+| TCP Port  | Description                                                  | Operation                                             |
+| --------- | ------------------------------------------------------------ | ----------------------------------------------------- |
+| TCP:10001 | ws protocol, message port such as message sending, pushing etc, used for client SDK | Port release or nginx reverse proxy, and firewall off |
+| TCP:10002 | api port, such as user, friend, group, message interfaces.   | Port release or nginx reverse proxy, and firewall off |
+| TCP:10005 | Required when choosing minio storage (openIM uses minio storage by default) | Port release or nginx reverse proxy, and firewall off |
+
+### Open Chat Ports
+
+| TCP Port  | Description                                         | Operation                                             |
+| --------- | --------------------------------------------------- | ----------------------------------------------------- |
+| TCP:10008 | Business system, such as registration, login etc    | Port release or nginx reverse proxy, and firewall off |
+| TCP:10009 | Management backend, such as statistics, banning etc | Port release or nginx reverse proxy, and firewall off |
+
+## Relationship Between APP and OpenIM
+
+OpenIM is an open source instant messaging component, it is not an independent product. This image shows the relationship between AppServer, AppClient, Open-IM-Server and Open-IM-SDK.
+
+![https://github.com/OpenIMSDK/Open-IM-Server/blob/main/docs/open-im-server.png](https://github.com/OpenIMSDK/Open-IM-Server/blob/main/docs/images/open-im-server.png)
+
+## Overall Architecture
+
+![https://github.com/OpenIMSDK/Open-IM-Server/blob/main/docs/Architecture.jpg](https://github.com/OpenIMSDK/Open-IM-Server/blob/main/docs/images/Architecture.jpg)
+
+## To start developing OpenIM
+The [community repository](https://github.com/OpenIMSDK/community) hosts all information about building Kubernetes from source, how to contribute code and documentation, who to contact about what, etc.
+
+
+## Contributing
+
+Contributions to this project are welcome! Please see [CONTRIBUTING.md](./CONTRIBUTING.md) for details.
+
+## Community Meetings
+We want anyone to get involved in our community, we offer gifts and rewards, and we welcome you to join us every Thursday night.
+
+We take notes of each [biweekly meeting](https://github.com/OpenIMSDK/Open-IM-Server/issues/381) in [GitHub discussions](https://github.com/OpenIMSDK/Open-IM-Server/discussions/categories/meeting), and our minutes are written in [Google Docs](https://docs.google.com/document/d/1nx8MDpuG74NASx081JcCpxPgDITNTpIIos0DS6Vr9GU/edit?usp=sharing).
+
+
+## Who are using Open-IM-Server
+The [user case studies](https://github.com/OpenIMSDK/community/blob/main/ADOPTERS.md) page includes the user list of the project. You can leave a [📝comment](https://github.com/OpenIMSDK/Open-IM-Server/issues/379) to let us know your use case.
+
+![avatar](https://openim-1253691595.cos.ap-nanjing.myqcloud.com/WechatIMG20.jpeg)
+
+## License
+
+Open-IM-Server is under the Apache 2.0 license. See the [LICENSE](./LICENSE) file for details

README_zh_CN.md

@@ -1,142 +0,0 @@
-<p align="center">
-    <a href="https://openim.io">
-        <img src="./assets/logo-gif/openim-logo.gif" width="60%" height="30%"/>
-    </a>
-</p>
-
-<div align="center">
-
-[![Stars](https://img.shields.io/github/stars/openimsdk/open-im-server?style=for-the-badge&logo=github&colorB=ff69b4)](https://github.com/openimsdk/open-im-server/stargazers)
-[![Forks](https://img.shields.io/github/forks/openimsdk/open-im-server?style=for-the-badge&logo=github&colorB=blue)](https://github.com/openimsdk/open-im-server/network/members)
-[![Codecov](https://img.shields.io/codecov/c/github/openimsdk/open-im-server?style=for-the-badge&logo=codecov&colorB=orange)](https://app.codecov.io/gh/openimsdk/open-im-server)
-[![Go Report Card](https://goreportcard.com/badge/github.com/openimsdk/open-im-server?style=for-the-badge)](https://goreportcard.com/report/github.com/openimsdk/open-im-server)
-[![Go Reference](https://img.shields.io/badge/Go%20Reference-blue.svg?style=for-the-badge&logo=go&logoColor=white)](https://pkg.go.dev/github.com/openimsdk/open-im-server/v3)
-[![License](https://img.shields.io/badge/license-Apache--2.0-green?style=for-the-badge)](https://github.com/openimsdk/open-im-server/blob/main/LICENSE)
-[![Slack](https://img.shields.io/badge/Slack-500%2B-blueviolet?style=for-the-badge&logo=slack&logoColor=white)](https://join.slack.com/t/openimsdk/shared_invite/zt-22720d66b-o_FvKxMTGXtcnnnHiMqe9Q)
-[![Best Practices](https://img.shields.io/badge/Best%20Practices-purple?style=for-the-badge)](https://www.bestpractices.dev/projects/8045)
-[![Good First Issues](https://img.shields.io/github/issues/openimsdk/open-im-server/good%20first%20issue?style=for-the-badge&logo=github)](https://github.com/openimsdk/open-im-server/issues?q=is%3Aissue+is%3Aopen+sort%3Aupdated-desc+label%3A%22good+first+issue%22)
-[![Language](https://img.shields.io/badge/Language-Go-blue.svg?style=for-the-badge&logo=go&logoColor=white)](https://golang.org/)
-
-
-<p align="center">
-  <a href="./README.md">English</a> · 
-  <a href="./README_zh_CN.md">中文</a> · 
-  <a href="./docs/readme/README_uk.md">Українська</a> · 
-  <a href="./docs/readme/README_cs.md">Česky</a> · 
-  <a href="./docs/readme/README_hu.md">Magyar</a> · 
-  <a href="./docs/readme/README_es.md">Español</a> · 
-  <a href="./docs/readme/README_fa.md">فارسی</a> · 
-  <a href="./docs/readme/README_fr.md">Français</a> · 
-  <a href="./docs/readme/README_de.md">Deutsch</a> · 
-  <a href="./docs/readme/README_pl.md">Polski</a> · 
-  <a href="./docs/readme/README_id.md">Indonesian</a> · 
-  <a href="./docs/readme/README_fi.md">Suomi</a> · 
-  <a href="./docs/readme/README_ml.md">മലയാളം</a> · 
-  <a href="./docs/readme/README_ja.md">日本語</a> · 
-  <a href="./docs/readme/README_nl.md">Nederlands</a> · 
-  <a href="./docs/readme/README_it.md">Italiano</a> · 
-  <a href="./docs/readme/README_ru.md">Русский</a> · 
-  <a href="./docs/readme/README_pt_BR.md">Português (Brasil)</a> · 
-  <a href="./docs/readme/README_eo.md">Esperanto</a> · 
-  <a href="./docs/readme/README_ko.md">한국어</a> · 
-  <a href="./docs/readme/README_ar.md">العربي</a> · 
-  <a href="./docs/readme/README_vi.md">Tiếng Việt</a> · 
-  <a href="./docs/readme/README_da.md">Dansk</a> · 
-  <a href="./docs/readme/README_el.md">Ελληνικά</a> · 
-  <a href="./docs/readme/README_tr.md">Türkçe</a>
-</p>
-
-
-</div>
-
-</p>
-
-## :busts_in_silhouette: 加入我们的社区
-
-+ 💬 [关注我们的 Twitter](https://twitter.com/founder_im63606)
-+ 🚀 [加入我们的 Slack](https://join.slack.com/t/openimsdk/shared_invite/zt-2hljfom5u-9ZuzP3NfEKW~BJKbpLm0Hw)
-+ :eyes: [加入我们的微信群](https://openim-1253691595.cos.ap-nanjing.myqcloud.com/WechatIMG20.jpeg)
-
-## Ⓜ️ 关于 OpenIM
-
-与Telegram、Signal、Rocket.Chat等独立聊天应用不同，OpenIM提供了专为开发者设计的开源即时通讯解决方案，而不是直接安装使用的独立聊天应用。OpenIM由OpenIM SDK和OpenIM Server两大部分组成，为开发者提供了一整套集成即时通讯功能的工具和服务，包括消息发送接收、用户管理和群组管理等。总体来说，OpenIM旨在为开发者提供必要的工具和框架，帮助他们在自己的应用中实现高效的即时通讯解决方案。
-
-![App-OpenIM 关系](./docs/images/oepnim-design.png)
-
-## 🚀 OpenIMSDK 介绍
-
-**OpenIMSDK** 是为 **OpenIMServer** 设计的IM SDK，专为集成到客户端应用而生。它支持多种功能和模块：
-
-+ 🌟 主要功能：
-  - 📦 本地存储
-  - 🔔 监听器回调
-  - 🛡️ API封装
-  - 🌐 连接管理
-
-+ 📚 主要模块：
-  1. 🚀 初始化及登录
-  2. 👤 用户管理
-  3. 👫 好友管理
-  4. 🤖 群组功能
-  5. 💬 会话处理
-
-它使用 Golang 构建，并支持跨平台部署，确保在所有平台上提供一致的接入体验。
-
-👉 **[探索 GO SDK](https://github.com/openimsdk/openim-sdk-core)**
-
-## 🌐 OpenIMServer 介绍
-
-+ **OpenIMServer** 的特点包括：
-  - 🌐 微服务架构：支持集群模式，包括网关(gateway)和多个rpc服务。
-  - 🚀 多样的部署方式：支持源代码、Kubernetes或Docker部署。
-  - 海量用户支持：支持十万级超大群组，千万级用户和百亿级消息。
-
-### 增强的业务功能：
-
-+ **REST API**：为业务系统提供REST API，增加群组创建、消息推送等后台接口功能。
-
-+ **Webhooks**：通过事件前后的回调，向业务服务器发送请求，扩展更多的业务形态。
-
-  ![整体架构](./docs/images/architecture-layers.png)
-
-  
-
-## :rocket: 快速入门
-
-在线体验iOS/Android/H5/PC/Web：
-
-👉 **[OpenIM在线演示](https://www.openim.io/en/commercial)**
-
-为了便于用户体验，我们提供了多种部署解决方案，您可以根据以下列表选择适合您的部署方式：
-
-+ **[源代码部署指南](https://docs.openim.io/guides/gettingStarted/imSourceCodeDeployment)**
-+ **[Docker 部署指南](https://docs.openim.io/guides/gettingStarted/dockerCompose)**
-
-## 系统支持
-
-支持 Linux、Windows、Mac 系统以及 ARM 和 AMD CPU 架构。
-
-## :link: 相关链接
-
-  + **[开发手册](https://docs.openim.io/)**
-  + **[更新日志](https://github.com/openimsdk/open-im-server/blob/main/CHANGELOG.md)**
-
-## :writing_hand: 如何贡献
-
-我们欢迎任何形式的贡献！在提交 Pull Request 之前，请确保阅读我们的[贡献者文档](https://github.com/openimsdk/open-im-server/blob/main/CONTRIBUTING.md)
-
-  + **[报告 Bug](https://github.com/openimsdk/open-im-server/issues/new?assignees=&labels=bug&template=bug_report.md&title=)**
-  + **[提出新特性](https://github.com/openimsdk/open-im-server/issues/new?assignees=&labels=enhancement&template=feature_request.md&title=)**
-  + **[提交 Pull Request](https://github.com/openimsdk/open-im-server/pulls)**
-
-感谢您的贡献，一起来打造强大的即时通讯解决方案！
-
-## :closed_book: 许可证
-
-  OpenIMSDK 在 Apache License 2.0 许可下可用。查看[LICENSE 文件](https://github.com/openimsdk/open-im-server/blob/main/LICENSE)了解更多信息。
-
-## 🔮 Thanks to our contributors!
-
-<a href="https://github.com/openimsdk/open-im-server/graphs/contributors">
-  <img src="https://contrib.rocks/image?repo=openimsdk/open-im-server" />
-</a>

assets/README.md

@@ -25,7 +25,7 @@ assets/
 
 ## Copyright Notice:
 
-The OpenIM logo, including its variations and animated versions, displayed in this repository [OpenIM](https://github.com/openimsdk/open-im-server) under the `/assets/logo` and `/assets/logo-gif` directories, are protected by copyright laws.
+The OpenIM logo, including its variations and animated versions, displayed in this repository [OpenIM](https://github.com/OpenIMSDK/openim) under the `/assets/logo` and `/assets/logo-gif` directories, are protected by copyright laws.
 
 The logo design is credited to @Xx(席欣).
 

assets/colors.md

@@ -1,11 +0,0 @@
-# Official Colors
-
-The openim logo has an official blue color.  When reproducing the logo, please use the official color, when possible.
-
-## Pantone
-
-When possible, the Pantone color is preferred for print material.  The official Pantone color is *285C*.
-
-## RGB
-
-When used digitally, the official RGB color code is *#326CE5*.

assets/demo/README.md

@@ -1,14 +0,0 @@
-## :star2: Why OpenIM
-
-**🔍 Function screenshot display**
-
-<div align="center">
-
-
-|             multiple message              |               Efficient meetings                |
-| :---------------------------------------: | :---------------------------------------------: |
-| ![multiple-message](./multiple-message.png) | ![efficient-meetings](./efficient-meetings.png) |
-|      **One-to-one and group chats**       |     **Special features - Custom messages**      |
-|      ![group-chat](./group-chat.png)      |   ![special-function](./special-function.png)    |
-
-</div>

bootstrap.bat

@@ -1,31 +0,0 @@
-@echo off
-SETLOCAL
-
-mage -version >nul 2>&1
-IF %ERRORLEVEL% EQU 0 (
-    echo Mage is already installed.
-    GOTO DOWNLOAD
-)
-
-go version >nul 2>&1
-IF NOT %ERRORLEVEL% EQU 0 (
-    echo Go is not installed. Please install Go and try again.
-    exit /b 1
-)
-
-echo Installing Mage...
-go install github.com/magefile/mage@latest
-
-mage -version >nul 2>&1
-IF NOT %ERRORLEVEL% EQU 0 (
-    echo Mage installation failed.
-    echo Please ensure that %GOPATH%/bin is in your PATH.
-    exit /b 1
-)
-
-echo Mage installed successfully.
-
-:DOWNLOAD
-go mod download
-
-ENDLOCAL

bootstrap.sh

@@ -1,23 +0,0 @@
-#!/bin/bash
-
-if [[ ":$PATH:" == *":$HOME/.local/bin:"* ]]; then
-    TARGET_DIR="$HOME/.local/bin"
-else
-    TARGET_DIR="/usr/local/bin"
-    echo "Using /usr/local/bin as the installation directory. Might require sudo permissions."
-fi
-
-if ! command -v mage &> /dev/null; then
-    echo "Installing Mage to $TARGET_DIR ..."
-    GOBIN=$TARGET_DIR go install github.com/magefile/mage@latest
-fi
-
-if ! command -v mage &> /dev/null; then
-    echo "Mage installation failed."
-    echo "Please ensure that $TARGET_DIR is in your \$PATH."
-    exit 1
-fi
-
-echo "Mage installed successfully."
-
-go mod download

build/README.md

@@ -1,65 +0,0 @@
-# Building OpenIM
-
-Building OpenIM is easy if you take advantage of the containerized build environment. This document will help guide you through understanding this build process.
-
-## Requirements
-
-1. Docker, using one of the following configurations:
-  * **macOS** Install Docker for Mac. See installation instructions [here](https://docs.docker.com/docker-for-mac/).
-     **Note**: You will want to set the Docker VM to have at least 4GB of initial memory or building will likely fail.
-  * **Linux with local Docker**  Install Docker according to the [instructions](https://docs.docker.com/installation/#installation) for your OS.
-  * **Windows with Docker Desktop WSL2 backend**  Install Docker according to the [instructions](https://docs.docker.com/docker-for-windows/wsl-tech-preview/). Be sure to store your sources in the local Linux file system, not the Windows remote mount at `/mnt/c`.
-  
-  **Note**: You will need to check if Docker CLI plugin buildx is properly installed (`docker-buildx` file should be present in `~/.docker/cli-plugins`). You can install buildx according to the [instructions](https://github.com/docker/buildx/blob/master/README.md#installing).
-
-2. **Optional** [Google Cloud SDK](https://developers.google.com/cloud/sdk/)
-
-You must install and configure Google Cloud SDK if you want to upload your release to Google Cloud Storage and may safely omit this otherwise.
-
-## Actions
-
-About [Images packages](https://github.com/orgs/OpenIMSDK/packages?repo_name=Open-IM-Server)
-
-All files in the `build/images` directory are not templated and are instead rendered by Github Actions, which is an automated process.
-
-Trigger condition:
-1. create a new tag with the format `vX.Y.Z` (e.g. `v1.0.0`)
-2. push the tag to the remote repository
-3. wait for the build to finish
-4. download the artifacts from the release page
-
-## Make images
-
-**help info:**
-
-```bash
-$ make image.help
-```
-
-**build images:**
-
-```bash
-$ make image
-```
-
-## Overview
-
-While it is possible to build OpenIM using a local golang installation, we have a build process that runs in a Docker container.  This simplifies initial set up and provides for a very consistent build and test environment.
-
-
-## Basic Flow
-
-The scripts directly under [`build/`](.) are used to build and test.  They will ensure that the `openim-build` Docker image is built (based on [`build/build-image/Dockerfile`](../Dockerfile) and after base image's `OPENIM_BUILD_IMAGE_CROSS_TAG` from Dockerfile is replaced with one of those actual tags of the base image, like `v1.13.9-2`) and then execute the appropriate command in that container.  These scripts will both ensure that the right data is cached from run to run for incremental builds and will copy the results back out of the container. You can specify a different registry/name and version for `openim-cross` by setting `OPENIM_CROSS_IMAGE` and `OPENIM_CROSS_VERSION`, see [`common.sh`](common.sh) for more details.
-
-The `openim-build` container image is built by first creating a "context" directory in `_output/images/build-image`.  It is done there instead of at the root of the OpenIM repo to minimize the amount of data we need to package up when building the image.
-
-There are 3 different containers instances that are run from this image.  The first is a "data" container to store all data that needs to persist across to support incremental builds. Next there is an "rsync" container that is used to transfer data in and out to the data container.  Lastly there is a "build" container that is used for actually doing build actions.  The data container persists across runs while the rsync and build containers are deleted after each use.
-
-`rsync` is used transparently behind the scenes to efficiently move data in and out of the container.  This will use an ephemeral port picked by Docker.  You can modify this by setting the `OPENIM_RSYNC_PORT` env variable.
-
-All Docker names are suffixed with a hash derived from the file path (to allow concurrent usage on things like CI machines) and a version number.  When the version number changes all state is cleared and clean build is started.  This allows the build infrastructure to be changed and signal to CI systems that old artifacts need to be deleted.
-
-## Build artifacts
-The build system output all its products to a top level directory in the source repository named `_output`.
-These include the binary compiled packages (e.g. imctl, openim-api etc.) and archived Docker images.
-If you intend to run a component with a docker image you will need to import it from this directory with

build/docker/openim-api/Dockerfile

@@ -19,6 +19,7 @@
 FROM golang:1.20 AS builder
 
 ARG GO111MODULE=on
+ARG GOPROXY=https://goproxy.cn,direct
 
 WORKDIR /openim/openim-server
 
@@ -30,15 +31,16 @@ RUN go mod download
 
 COPY . .
 
+RUN make clean
 RUN make build BINS=openim-api
 
-RUN cp /openim/openim-server/_output/bin/platforms/$(go env GOOS)/$(go env GOARCH)/openim-api /usr/bin/openim-api
-
-# FROM ghcr.io/openim-sigs/openim-bash-image:latest
 FROM ghcr.io/openim-sigs/openim-bash-image:latest
 
 WORKDIR /openim/openim-server
 
-COPY --from=builder /usr/bin/openim-api ./bin/openim-api
+COPY --from=builder /openim/openim-server/_output/bin/platforms /openim/openim-server/_output/bin/platforms
+COPY --from=builder /openim/openim-server/config /openim/openim-server/config
 
-ENTRYPOINT ["./bin/openim-api"]
+EXPOSE ${10002}
+
+CMD ["bash", "-c","${OPENIM_SERVER_BINDIR}/platforms/${OS}/${ARCH}/openim-api --port 10002 -c ${SERVER_WORKDIR}/config"]

build/docker/openim-cmdutils/Dockerfile

@@ -19,6 +19,7 @@
 FROM golang:1.20 AS builder
 
 ARG GO111MODULE=on
+ARG GOPROXY=https://goproxy.cn,direct
 
 WORKDIR /openim/openim-server
 
@@ -30,15 +31,15 @@ RUN go mod download
 
 COPY . .
 
+RUN go mod download
+RUN make clean
 RUN make build BINS=openim-cmdutils
-RUN cp /openim/openim-server/_output/bin/platforms/$(go env GOOS)/$(go env GOARCH)/openim-cmdutils /usr/bin/openim-cmdutils
 
 FROM ghcr.io/openim-sigs/openim-bash-image:latest
 
 WORKDIR /openim/openim-server
 
-COPY --from=builder /usr/bin/openim-cmdutils ./bin/openim-cmdutils
+COPY --from=builder ${SERVER_WORKDIR}/_output/bin/platforms /openim/openim-server/_output/bin/platforms
+COPY --from=builder ${SERVER_WORKDIR}/config /openim/openim-server/config
 
-ENTRYPOINT ["./bin/openim-cmdutils"]
-
-CMD ["--help"]
+CMD ["bash", "-c","${OPENIM_SERVER_BINDIR}/platforms/${OS}/${ARCH}/openim-cmdutils"]

build/docker/openim-crontask/Dockerfile

@@ -19,6 +19,7 @@
 FROM golang:1.20 AS builder
 
 ARG GO111MODULE=on
+ARG GOPROXY=https://goproxy.cn,direct
 
 WORKDIR /openim/openim-server
 
@@ -30,15 +31,14 @@ RUN go mod download
 
 COPY . .
 
+RUN make clean
 RUN make build BINS=openim-crontask
 
-RUN cp /openim/openim-server/_output/bin/platforms/$(go env GOOS)/$(go env GOARCH)/openim-crontask /usr/bin/openim-crontask
-
-# FROM ghcr.io/openim-sigs/openim-bash-image:latest
 FROM ghcr.io/openim-sigs/openim-bash-image:latest
 
 WORKDIR /openim/openim-server
 
-COPY --from=builder /usr/bin/openim-crontask ./bin/openim-crontask
+COPY --from=builder /openim/openim-server/_output/bin/platforms /openim/openim-server/_output/bin/platforms
+COPY --from=builder /openim/openim-server/config /openim/openim-server/config
 
-ENTRYPOINT ["./bin/openim-crontask"]
+CMD ["bash", "-c","${OPENIM_SERVER_BINDIR}/platforms/${OS}/${ARCH}/openim-crontask"]

build/docker/openim-msggateway/Dockerfile

@@ -19,6 +19,7 @@
 FROM golang:1.20 AS builder
 
 ARG GO111MODULE=on
+ARG GOPROXY=https://goproxy.cn,direct
 
 WORKDIR /openim/openim-server
 
@@ -31,18 +32,19 @@ RUN go mod download
 COPY . .
 
 RUN make clean
-RUN make build BINS=component
+RUN make build BINS=openim-msggateway
 
-# FROM ghcr.io/openim-sigs/openim-bash-image:latest
 FROM ghcr.io/openim-sigs/openim-bash-image:latest
 
 WORKDIR /openim/openim-server
 
-COPY --from=builder /openim/openim-server/_output/bin/tools /openim/openim-server/_output/bin/tools/
+COPY --from=builder /openim/openim-server/_output/bin/platforms /openim/openim-server/_output/bin/platforms
 COPY --from=builder /openim/openim-server/config /openim/openim-server/config
 
-ENV OPENIM_SERVER_CONFIG_NAME=/openim/openim-server/config
+ENV OS ${OS}
+ENV ARCH ${ARCH}
 
-RUN mv ${OPENIM_SERVER_BINDIR}/platforms/$(get_os)/$(get_arch)/component /usr/bin/component
+EXPOSE 10140
+EXPOSE 10001
 
-ENTRYPOINT ["bash", "-c", "component -c $OPENIM_SERVER_CONFIG_NAME"]
+CMD ${OPENIM_SERVER_BINDIR}/platforms/${OS}/${ARCH}/openim-msggateway --port 10140 --ws_port 10001

build/docker/openim-msgtransfer/Dockerfile

@@ -19,6 +19,7 @@
 FROM golang:1.20 AS builder
 
 ARG GO111MODULE=on
+ARG GOPROXY=https://goproxy.cn,direct
 
 WORKDIR /openim/openim-server
 
@@ -30,15 +31,17 @@ RUN go mod download
 
 COPY . .
 
+RUN make clean
 RUN make build BINS=openim-msgtransfer
 
-RUN cp /openim/openim-server/_output/bin/platforms/$(go env GOOS)/$(go env GOARCH)/openim-msgtransfer /usr/bin/openim-msgtransfer
-
-# FROM ghcr.io/openim-sigs/openim-bash-image:latest
 FROM ghcr.io/openim-sigs/openim-bash-image:latest
 
+ENV OS ${OS}
+ENV ARCH ${ARCH}
+
 WORKDIR /openim/openim-server
 
-COPY --from=builder /usr/bin/openim-msgtransfer ./bin/openim-msgtransfer
+COPY --from=builder /openim/openim-server/_output/bin/platforms /openim/openim-server/_output/bin/platforms
+COPY --from=builder /openim/openim-server/config /openim/openim-server/config
 
-ENTRYPOINT ["./bin/openim-msgtransfer"]
+CMD ${OPENIM_SERVER_BINDIR}/platforms/${OS}/${ARCH}/openim-msgtransfer

build/docker/openim-push/Dockerfile

@@ -19,6 +19,7 @@
 FROM golang:1.20 AS builder
 
 ARG GO111MODULE=on
+ARG GOPROXY=https://goproxy.cn,direct
 
 WORKDIR /openim/openim-server
 
@@ -30,15 +31,19 @@ RUN go mod download
 
 COPY . .
 
+RUN make clean
 RUN make build BINS=openim-push
 
-RUN cp /openim/openim-server/_output/bin/platforms/$(go env GOOS)/$(go env GOARCH)/openim-push /usr/bin/openim-push
-
-# FROM ghcr.io/openim-sigs/openim-bash-image:latest
 FROM ghcr.io/openim-sigs/openim-bash-image:latest
 
 WORKDIR /openim/openim-server
 
-COPY --from=builder /usr/bin/openim-push ./bin/openim-push
+ENV OS ${OS}
+ENV ARCH ${ARCH}
 
-ENTRYPOINT ["./bin/openim-push"]
+COPY --from=builder /openim/openim-server/_output/bin/platforms /openim/openim-server/_output/bin/platforms
+COPY --from=builder /openim/openim-server/config /openim/openim-server/config
+
+EXPOSE 10170
+
+CMD ${OPENIM_SERVER_BINDIR}/platforms/${OS}/${ARCH}/openim-push --port 10170

build/docker/openim-rpc-auth/Dockerfile

@@ -19,6 +19,7 @@
 FROM golang:1.20 AS builder
 
 ARG GO111MODULE=on
+ARG GOPROXY=https://goproxy.cn,direct
 
 WORKDIR /openim/openim-server
 
@@ -30,15 +31,22 @@ RUN go mod download
 
 COPY . .
 
-RUN make build BINS=openim-rpc-msg
+RUN make clean
 
-RUN cp /openim/openim-server/_output/bin/platforms/$(go env GOOS)/$(go env GOARCH)/openim-rpc-msg /usr/bin/openim-rpc-msg
+# RUN make build BINS=openim-rpc
+
+RUN CGO_ENABLED=0 go build -ldflags="-w -s" -o ./_output/bin/platforms/$(go env GOOS)/$(go env GOARCH)/openim-rpc-auth ./cmd/openim-rpc/openim-rpc-auth
 
-# FROM ghcr.io/openim-sigs/openim-bash-image:latest
 FROM ghcr.io/openim-sigs/openim-bash-image:latest
 
 WORKDIR /openim/openim-server
 
-COPY --from=builder /usr/bin/openim-rpc-msg ./bin/openim-rpc-msg
+ENV OS ${OS}
+ENV ARCH ${ARCH}
 
-ENTRYPOINT ["./bin/openim-rpc-msg"]
+COPY --from=builder /openim/openim-server/_output/bin/platforms /openim/openim-server/_output/bin/platforms/
+COPY --from=builder /openim/openim-server/config /openim/openim-server/config
+
+EXPOSE 10160
+
+CMD ["bash", "-c","${OPENIM_SERVER_BINDIR}/platforms/${OS}/${ARCH}/openim-rpc-auth --port 10160 -c ${SERVER_WORKDIR}/config"]

build/docker/openim-rpc-conversation/Dockerfile

@@ -0,0 +1,59 @@
+# Copyright © 2023 OpenIM. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# OpenIM base image: https://github.com/openim-sigs/openim-base-image
+
+# Set go mod installation source and proxy
+
+FROM golang:1.20 AS builder
+
+ARG GO111MODULE=on
+ARG GOPROXY=https://goproxy.cn,direct
+
+WORKDIR /openim/openim-server
+
+ENV GO111MODULE=$GO111MODULE
+ENV GOPROXY=$GOPROXY
+
+COPY go.mod go.sum ./
+RUN go mod download
+
+COPY . .
+
+RUN make clean
+
+RUN make build BINS=openim-rpc
+# RUN CGO_ENABLED=0 go build -ldflags="-w -s" -o ./_output/bin/platforms/$(go env GOOS)/$(go env GOARCH)/openim-rpc-conversation ./cmd/openim-rpc/openim-rpc-conversation
+
+RUN rm -rf ./_output/bin/platforms/$(go env GOOS)/$(go env GOARCH)/openim-rpc-friend && \
+    rm -rf ./_output/bin/platforms/$(go env GOOS)/$(go env GOARCH)/openim-rpc-group && \
+    rm -rf ./_output/bin/platforms/$(go env GOOS)/$(go env GOARCH)/openim-rpc-msg && \
+    rm -rf ./_output/bin/platforms/$(go env GOOS)/$(go env GOARCH)/openim-rpc-third && \
+    rm -rf ./_output/bin/platforms/$(go env GOOS)/$(go env GOARCH)/openim-rpc-user && \
+    rm -rf ./_output/bin/platforms/$(go env GOOS)/$(go env GOARCH)/openim-rpc-auth
+
+FROM ghcr.io/openim-sigs/openim-bash-image:latest
+
+WORKDIR /openim/openim-server
+
+ENV OS ${OS}
+ENV ARCH ${ARCH}
+
+COPY --from=builder /openim/openim-server/_output/bin/platforms /openim/openim-server/_output/bin/platforms/
+COPY --from=builder /openim/openim-server/config /openim/openim-server/config
+
+EXPOSE 10230
+EXPOSE 20230
+
+CMD ["bash", "-c","${OPENIM_SERVER_BINDIR}/platforms/${OS}/${ARCH}/openim-rpc-conversation --port 10230 --prometheus_port 20230 -c ${SERVER_WORKDIR}/config"]

build/docker/openim-rpc-friend/Dockerfile

@@ -0,0 +1,59 @@
+# Copyright © 2023 OpenIM. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# OpenIM base image: https://github.com/openim-sigs/openim-base-image
+
+# Set go mod installation source and proxy
+
+FROM golang:1.20 AS builder
+
+ARG GO111MODULE=on
+ARG GOPROXY=https://goproxy.cn,direct
+
+WORKDIR /openim/openim-server
+
+ENV GO111MODULE=$GO111MODULE
+ENV GOPROXY=$GOPROXY
+
+COPY go.mod go.sum ./
+RUN go mod download
+
+COPY . .
+
+RUN make clean
+
+RUN make build BINS=openim-rpc
+# RUN CGO_ENABLED=0 go build -ldflags="-w -s" -o ./_output/bin/platforms/$(go env GOOS)/$(go env GOARCH)/openim-rpc-friend ./cmd/openim-rpc/openim-rpc-friend
+
+RUN rm -rf ./_output/bin/platforms/$(go env GOOS)/$(go env GOARCH)/openim-rpc-group && \
+    rm -rf ./_output/bin/platforms/$(go env GOOS)/$(go env GOARCH)/openim-rpc-msg && \
+    rm -rf ./_output/bin/platforms/$(go env GOOS)/$(go env GOARCH)/openim-rpc-third && \
+    rm -rf ./_output/bin/platforms/$(go env GOOS)/$(go env GOARCH)/openim-rpc-user && \
+    rm -rf ./_output/bin/platforms/$(go env GOOS)/$(go env GOARCH)/openim-rpc-conversation && \
+    rm -rf ./_output/bin/platforms/$(go env GOOS)/$(go env GOARCH)/openim-rpc-auth
+
+FROM ghcr.io/openim-sigs/openim-bash-image:latest
+
+WORKDIR /openim/openim-server
+
+ENV OS ${OS}
+ENV ARCH ${ARCH}
+
+COPY --from=builder /openim/openim-server/_output/bin/platforms /openim/openim-server/_output/bin/platforms/
+COPY --from=builder /openim/openim-server/config /openim/openim-server/config
+
+EXPOSE 10120
+EXPOSE 20120
+
+CMD ["bash", "-c","${OPENIM_SERVER_BINDIR}/platforms/${OS}/${ARCH}/openim-rpc-friend --port 10120 --prometheus_port 20120 -c ${SERVER_WORKDIR}/config"]

build/docker/openim-rpc-group/Dockerfile

@@ -0,0 +1,59 @@
+# Copyright © 2023 OpenIM. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# OpenIM base image: https://github.com/openim-sigs/openim-base-image
+
+# Set go mod installation source and proxy
+
+FROM golang:1.20 AS builder
+
+ARG GO111MODULE=on
+ARG GOPROXY=https://goproxy.cn,direct
+
+WORKDIR /openim/openim-server
+
+ENV GO111MODULE=$GO111MODULE
+ENV GOPROXY=$GOPROXY
+
+COPY go.mod go.sum ./
+RUN go mod download
+
+COPY . .
+
+RUN make clean
+
+RUN make build BINS=openim-rpc
+# RUN CGO_ENABLED=0 go build -ldflags="-w -s" -o ./_output/bin/platforms/$(go env GOOS)/$(go env GOARCH)/openim-rpc-group ./cmd/openim-rpc/openim-rpc-group
+
+RUN rm -rf ./_output/bin/platforms/$(go env GOOS)/$(go env GOARCH)/openim-rpc-friend && \
+    rm -rf ./_output/bin/platforms/$(go env GOOS)/$(go env GOARCH)/openim-rpc-msg && \
+    rm -rf ./_output/bin/platforms/$(go env GOOS)/$(go env GOARCH)/openim-rpc-third && \
+    rm -rf ./_output/bin/platforms/$(go env GOOS)/$(go env GOARCH)/openim-rpc-user && \
+    rm -rf ./_output/bin/platforms/$(go env GOOS)/$(go env GOARCH)/openim-rpc-conversation && \
+    rm -rf ./_output/bin/platforms/$(go env GOOS)/$(go env GOARCH)/openim-rpc-auth
+
+FROM ghcr.io/openim-sigs/openim-bash-image:latest
+
+WORKDIR /openim/openim-server
+
+ENV OS ${OS}
+ENV ARCH ${ARCH}
+
+COPY --from=builder /openim/openim-server/_output/bin/platforms /openim/openim-server/_output/bin/platforms/
+COPY --from=builder /openim/openim-server/config /openim/openim-server/config
+
+EXPOSE 10150
+EXPOSE 20150
+
+CMD ["bash", "-c","${OPENIM_SERVER_BINDIR}/platforms/${OS}/${ARCH}/openim-rpc-group --port 10150 --prometheus_port 20150 -c ${SERVER_WORKDIR}/config"]

build/docker/openim-rpc-msg/Dockerfile

@@ -0,0 +1,59 @@
+# Copyright © 2023 OpenIM. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# OpenIM base image: https://github.com/openim-sigs/openim-base-image
+
+# Set go mod installation source and proxy
+
+FROM golang:1.20 AS builder
+
+ARG GO111MODULE=on
+ARG GOPROXY=https://goproxy.cn,direct
+
+WORKDIR /openim/openim-server
+
+ENV GO111MODULE=$GO111MODULE
+ENV GOPROXY=$GOPROXY
+
+COPY go.mod go.sum ./
+RUN go mod download
+
+COPY . .
+
+RUN make clean
+
+RUN make build BINS=openim-rpc
+# RUN CGO_ENABLED=0 go build -ldflags="-w -s" -o ./_output/bin/platforms/$(go env GOOS)/$(go env GOARCH)/openim-rpc-msg ./cmd/openim-rpc/openim-rpc-msg
+
+RUN rm -rf ./_output/bin/platforms/$(go env GOOS)/$(go env GOARCH)/openim-rpc-friend && \
+    rm -rf ./_output/bin/platforms/$(go env GOOS)/$(go env GOARCH)/openim-rpc-group && \
+    rm -rf ./_output/bin/platforms/$(go env GOOS)/$(go env GOARCH)/openim-rpc-third && \
+    rm -rf ./_output/bin/platforms/$(go env GOOS)/$(go env GOARCH)/openim-rpc-user && \
+    rm -rf ./_output/bin/platforms/$(go env GOOS)/$(go env GOARCH)/openim-rpc-conversation && \
+    rm -rf ./_output/bin/platforms/$(go env GOOS)/$(go env GOARCH)/openim-rpc-auth
+
+FROM ghcr.io/openim-sigs/openim-bash-image:latest
+
+WORKDIR /openim/openim-server
+
+ENV OS ${OS}
+ENV ARCH ${ARCH}
+
+COPY --from=builder /openim/openim-server/_output/bin/platforms /openim/openim-server/_output/bin/platforms/
+COPY --from=builder /openim/openim-server/config /openim/openim-server/config
+
+EXPOSE 10130
+EXPOSE 20130
+
+CMD ["bash", "-c","${OPENIM_SERVER_BINDIR}/platforms/${OS}/${ARCH}/openim-rpc-msg --port 10130 --prometheus_port 20130 -c ${SERVER_WORKDIR}/config"]

build/docker/openim-rpc-third/Dockerfile

@@ -0,0 +1,58 @@
+# Copyright © 2023 OpenIM. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# OpenIM base image: https://github.com/openim-sigs/openim-base-image
+
+# Set go mod installation source and proxy
+
+FROM golang:1.20 AS builder
+
+ARG GO111MODULE=on
+ARG GOPROXY=https://goproxy.cn,direct
+
+WORKDIR /openim/openim-server
+
+ENV GO111MODULE=$GO111MODULE
+ENV GOPROXY=$GOPROXY
+
+COPY go.mod go.sum ./
+RUN go mod download
+
+COPY . .
+
+RUN make clean
+
+RUN make build BINS=openim-rpc
+# RUN CGO_ENABLED=0 go build -ldflags="-w -s" -o ./_output/bin/platforms/$(go env GOOS)/$(go env GOARCH)/openim-rpc-third ./cmd/openim-rpc/openim-rpc-third
+
+RUN rm -rf ./_output/bin/platforms/$(go env GOOS)/$(go env GOARCH)/openim-rpc-friend && \
+    rm -rf ./_output/bin/platforms/$(go env GOOS)/$(go env GOARCH)/openim-rpc-group && \
+    rm -rf ./_output/bin/platforms/$(go env GOOS)/$(go env GOARCH)/openim-rpc-msg && \
+    rm -rf ./_output/bin/platforms/$(go env GOOS)/$(go env GOARCH)/openim-rpc-user && \
+    rm -rf ./_output/bin/platforms/$(go env GOOS)/$(go env GOARCH)/openim-rpc-conversation && \
+    rm -rf ./_output/bin/platforms/$(go env GOOS)/$(go env GOARCH)/openim-rpc-auth
+
+FROM ghcr.io/openim-sigs/openim-bash-image:latest
+
+WORKDIR /openim/openim-server
+
+ENV OS ${OS}
+ENV ARCH ${ARCH}
+
+COPY --from=builder /openim/openim-server/_output/bin/platforms /openim/openim-server/_output/bin/platforms/
+COPY --from=builder /openim/openim-server/config /openim/openim-server/config
+
+EXPOSE 10200
+
+CMD ["bash", "-c","${OPENIM_SERVER_BINDIR}/platforms/${OS}/${ARCH}/openim-rpc-third --port 10200 -c ${SERVER_WORKDIR}/config"]

build/docker/openim-rpc-user/Dockerfile

@@ -0,0 +1,58 @@
+# Copyright © 2023 OpenIM. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# OpenIM base image: https://github.com/openim-sigs/openim-base-image
+
+# Set go mod installation source and proxy
+
+FROM golang:1.20 AS builder
+
+ARG GO111MODULE=on
+ARG GOPROXY=https://goproxy.cn,direct
+
+WORKDIR /openim/openim-server
+
+ENV GO111MODULE=$GO111MODULE
+ENV GOPROXY=$GOPROXY
+
+COPY go.mod go.sum ./
+RUN go mod download
+
+COPY . .
+
+RUN make clean
+
+RUN make build BINS=openim-rpc
+# RUN CGO_ENABLED=0 go build -ldflags="-w -s" -o ./_output/bin/platforms/$(go env GOOS)/$(go env GOARCH)/openim-rpc-user ./cmd/openim-rpc/openim-rpc-user
+
+RUN rm -rf ./_output/bin/platforms/$(go env GOOS)/$(go env GOARCH)/openim-rpc-friend && \
+    rm -rf ./_output/bin/platforms/$(go env GOOS)/$(go env GOARCH)/openim-rpc-group && \
+    rm -rf ./_output/bin/platforms/$(go env GOOS)/$(go env GOARCH)/openim-rpc-msg && \
+    rm -rf ./_output/bin/platforms/$(go env GOOS)/$(go env GOARCH)/openim-rpc-third && \
+    rm -rf ./_output/bin/platforms/$(go env GOOS)/$(go env GOARCH)/openim-rpc-conversation && \
+    rm -rf ./_output/bin/platforms/$(go env GOOS)/$(go env GOARCH)/openim-rpc-auth
+
+FROM ghcr.io/openim-sigs/openim-bash-image:latest
+
+WORKDIR /openim/openim-server
+
+ENV OS ${OS}
+ENV ARCH ${ARCH}
+
+COPY --from=builder /openim/openim-server/_output/bin/platforms /openim/openim-server/_output/bin/platforms/
+COPY --from=builder /openim/openim-server/config /openim/openim-server/config
+
+EXPOSE 10110
+
+CMD ["bash", "-c","${OPENIM_SERVER_BINDIR}/platforms/${OS}/${ARCH}/openim-rpc-user --port 10110 -c ${SERVER_WORKDIR}/config"]

build/images/openim-msggateway/Dockerfile

@@ -1,44 +0,0 @@
-# Copyright © 2023 OpenIM. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-# OpenIM base image: https://github.com/openim-sigs/openim-base-image
-
-# Set go mod installation source and proxy
-
-FROM golang:1.20 AS builder
-
-ARG GO111MODULE=on
-
-WORKDIR /openim/openim-server
-
-ENV GO111MODULE=$GO111MODULE
-ENV GOPROXY=$GOPROXY
-
-COPY go.mod go.sum ./
-RUN go mod download
-
-COPY . .
-
-RUN make build BINS=openim-msggateway
-
-RUN cp /openim/openim-server/_output/bin/platforms/$(go env GOOS)/$(go env GOARCH)/openim-msggateway /usr/bin/openim-msggateway
-
-# FROM ghcr.io/openim-sigs/openim-bash-image:latest
-FROM ghcr.io/openim-sigs/openim-bash-image:latest
-
-WORKDIR /openim/openim-server
-
-COPY --from=builder /usr/bin/openim-msggateway ./bin/openim-msggateway
-
-ENTRYPOINT ["./bin/openim-msggateway"]

build/images/openim-rpc-auth/Dockerfile

@@ -1,44 +0,0 @@
-# Copyright © 2023 OpenIM. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-# OpenIM base image: https://github.com/openim-sigs/openim-base-image
-
-# Set go mod installation source and proxy
-
-FROM golang:1.20 AS builder
-
-ARG GO111MODULE=on
-
-WORKDIR /openim/openim-server
-
-ENV GO111MODULE=$GO111MODULE
-ENV GOPROXY=$GOPROXY
-
-COPY go.mod go.sum ./
-RUN go mod download
-
-COPY . .
-
-RUN make build BINS=openim-rpc-auth
-
-RUN cp /openim/openim-server/_output/bin/platforms/$(go env GOOS)/$(go env GOARCH)/openim-rpc-auth /usr/bin/openim-rpc-auth
-
-# FROM ghcr.io/openim-sigs/openim-bash-image:latest
-FROM ghcr.io/openim-sigs/openim-bash-image:latest
-
-WORKDIR /openim/openim-server
-
-COPY --from=builder /usr/bin/openim-rpc-auth ./bin/openim-rpc-auth
-
-ENTRYPOINT ["./bin/openim-rpc-auth"]

build/images/openim-rpc-conversation/Dockerfile

@@ -1,44 +0,0 @@
-# Copyright © 2023 OpenIM. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-# OpenIM base image: https://github.com/openim-sigs/openim-base-image
-
-# Set go mod installation source and proxy
-
-FROM golang:1.20 AS builder
-
-ARG GO111MODULE=on
-
-WORKDIR /openim/openim-server
-
-ENV GO111MODULE=$GO111MODULE
-ENV GOPROXY=$GOPROXY
-
-COPY go.mod go.sum ./
-RUN go mod download
-
-COPY . .
-
-RUN make build BINS=openim-rpc-conversation
-
-RUN cp /openim/openim-server/_output/bin/platforms/$(go env GOOS)/$(go env GOARCH)/openim-rpc-conversation /usr/bin/openim-rpc-conversation
-
-# FROM ghcr.io/openim-sigs/openim-bash-image:latest
-FROM ghcr.io/openim-sigs/openim-bash-image:latest
-
-WORKDIR /openim/openim-server
-
-COPY --from=builder /usr/bin/openim-rpc-conversation ./bin/openim-rpc-conversation
-
-ENTRYPOINT ["./bin/openim-rpc-conversation"]