feat: add openim docker

Signed-off-by: Xinwei Xiong (cubxxw) <3293172751nss@gmail.com>

.docker-compose_cfg/config.yaml

@@ -1,79 +0,0 @@
-# Copyright © 2023 OpenIM. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-#---------------Infrastructure configuration---------------------#
-etcd:
-  etcdSchema: openim  #默认即可
-  etcdAddr: [ 127.0.0.1:2379 ] #单机部署时，默认即可
-  userName:
-  password:
-  secret: openIM123
-
-mysql:
-  dbMysqlDatabaseName: admin_chat # 数据库名字 默认即可
-
-# 默认管理员账号
-admin:
-  defaultAccount:
-    account: [ "admin1", "admin2" ]
-    defaultPassword: [ "password1", "password2" ]
-    openIMUserID: [ "openIM123456", "openIMAdmin" ]
-    faceURL: [ "", "" ]
-    nickname: [ "admin1", "admin2" ]
-    level: [ 1, 100 ]
-
-
-adminapi:
-  openImAdminApiPort: [ 10009 ] #管理后台api服务端口，默认即可，需要开放此端口或做nginx转发
-  listenIP: 0.0.0.0
-
-chatapi:
-  openImChatApiPort: [ 10008 ] #登录注册，默认即可，需要开放此端口或做nginx转发
-  listenIP: 0.0.0.0
-
-rpcport: # rpc服务端口 默认即可
-  openImAdminPort: [ 30200 ]
-  openImChatPort: [ 30300 ]
-
-
-rpcregistername: #rpc注册服务名，默认即可
-  openImChatName: Chat
-  openImAdminCMSName: Admin
-
-chat:
-  codeTTL: 300 #短信验证码有效时间(秒)
-  superVerificationCode: 666666 # 超级验证码
-  alismsverify: #阿里云短信配置，在阿里云申请成功后修改以下四项
-    accessKeyId:
-    accessKeySecret:
-    signName:
-    verificationCodeTemplateCode:
-
-
-oss:
-  tempDir: enterprise-temp # 临时密钥上传的目录
-  dataDir: enterprise-data # 最终存放目录
-  aliyun:
-    endpoint: https://oss-cn-chengdu.aliyuncs.com
-    accessKeyID: ""
-    accessKeySecret: ""
-    bucket: ""
-  tencent:
-    BucketURL: ""
-    serviceURL: https://cos.COS_REGION.myqcloud.com
-    secretID: ""
-    secretKey: ""
-    sessionToken: ""
-    bucket: ""
-  use: "minio"

.docker-compose_cfg/datasource-compose.yaml

@@ -1,27 +0,0 @@
-# Copyright © 2023 OpenIM. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-#more datasource-compose.yaml 
-apiVersion: 1
-
-datasources:
-- name: Prometheus
-  type: prometheus
-  access: proxy
-  orgId: 1
-  url: http://127.0.0.1:9091
-  basicAuth: false
-  isDefault: true
-  version: 1
-  editable: true

.docker-compose_cfg/prometheus-compose.yml

@@ -1,85 +0,0 @@
-# Copyright © 2023 OpenIM. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-#more prometheus-compose.yml 
-global:
-  scrape_interval:     15s 
-  evaluation_interval: 15s 
-  external_labels:
-    monitor: 'openIM-monitor'
-
-scrape_configs:
-    - job_name: 'prometheus'
-      static_configs:
-      - targets: ['localhost:9091']
-
-    - job_name: 'openIM-server'
-      metrics_path: /metrics
-      static_configs:
-      - targets: ['localhost:10002']
-        labels:
-          group: 'api'
-
-      - targets: ['localhost:20110']
-        labels:
-          group: 'user'
-
-      - targets: ['localhost:20120']
-        labels:
-          group: 'friend'
-
-      - targets: ['localhost:20130']
-        labels:
-          group: 'message'
-
-      - targets: ['localhost:20140']
-        labels:
-          group: 'msg-gateway'    
-
-      - targets: ['localhost:20150']
-        labels:
-          group: 'group'
-
-      - targets: ['localhost:20160']
-        labels:
-          group: 'auth'
-
-      - targets: ['localhost:20170']
-        labels:
-          group: 'push'
-
-      - targets: ['localhost:20120']
-        labels:
-          group: 'friend'
-
-      
-      - targets: ['localhost:20230']
-        labels:
-          group: 'conversation' 
-
-      
-      - targets: ['localhost:21400', 'localhost:21401', 'localhost:21402', 'localhost:21403']
-        labels:
-          group: 'msg-transfer'
-       
- 
-
-
-      
-
-    - job_name: 'node'  
-      scrape_interval: 8s
-      static_configs:
-      - targets: ['localhost:9100']
-     

.dockerignore

@@ -20,7 +20,6 @@ CHANGELOG/
 
 # Ignore deployment-related files
 docker-compose.yaml
-deployments/
 
 # Ignore assets
 assets/

.github/.codecov.yml

@@ -20,4 +20,20 @@ coverage:
         paths:
           - pkg/* # only include coverage in "pkg/" folder
         informational: true # Always pass check
-    patch: off # disable the commit only checks
+      tools: # declare a new status context "tools"
+        paths:
+          - tools/* # only include coverage in "tools/" folder
+        informational: true # Always pass check
+      test: # declare a new status context "test"
+        paths:
+          - test/* # only include coverage in "test/" folder
+        informational: true # Always pass check
+      # internal: # declare a new status context "internal"
+      #   paths:
+      #     - internal/* # only include coverage in "internal/" folder
+      #   informational: true # Always pass check
+      # cmd: # declare a new status context "cmd"
+      #   paths:
+      #     - cmd/* # only include coverage in "cmd/" folder
+      #   informational: true # Always pass check
+    patch: off # disable the commit only checks

.github/workflows/auto-gh-pr.yml

@@ -24,38 +24,49 @@ on:
     types: [created]
 
 jobs:
-  create-pr:
+  sync-issue-to-pr:
     runs-on: ubuntu-latest
-    if: github.event.pull_request.base.ref == 'main'
-    # && github.event.pull_request.merged == true
     steps:
-        - name: Check out code
-          uses: actions/checkout@v4
-          with:
-            fetch-depth: 0
+      - name: Checkout code
+        uses: actions/checkout@v2
+      
+      - name: Sync Issue to PR
+        if: github.event_name == 'pull_request' && github.event.pull_request.base.ref == 'main'
+        run: |
+          PR_BODY="${{ github.event.pull_request.body }}"
 
-        - name: Create PR to release branch
-          run: |
-            ISSUEID=$(gh pr view ${{ github.event.pull_request.number }} --repo $OWNER/$REPO | grep -oP 'Fixes #\K\d+')
-            echo "===========> $ISSUEID"
-            ISSUE=$(gh issue view $ISSUEID --repo $OWNER/$REPO --json labels,assignees,milestone,title)
-            echo "===========> $ISSUE"
+          ISSUE_NUMBER=$(echo "$PR_BODY" | grep -oP 'Fixes #\K\d+')
+          if [[ -z "$ISSUE_NUMBER" ]]; then
+            echo "No Issue number found."
+            exit 1
+          fi
 
-            LABELS=$(echo $ISSUE | jq -r '.labels[] | select(.name) | .name' | jq -R -r -s -c 'split("\n")[:-1] | join(",")')
-            ASSIGNEES=$(echo $ISSUE | jq -r '.assignees[] | select(.login) | .login' | jq -R -s -c 'split("\n")[:-1] | join(",")')
-            MILESTONE=$(echo $ISSUE | jq -r '.milestone | select(.title) | .title')
-            TITLE=$(echo $ISSUE | jq -r '.title')
+          echo "Issue number found: $ISSUE_NUMBER"
 
-            gh pr edit ${{ github.event.pull_request.number }} --repo $OWNER/$REPO --add-label "$LABELS" --add-assignee "$ASSIGNEES" --milestone "$MILESTONE"
+          # Using GitHub CLI to get issue details
+          gh issue view "$ISSUE_NUMBER" --repo "${{ github.repository }}" --json labels,assignees,milestone,title > issue_data.json
 
-            # git checkout -b bot/merge-to-release-$ISSUEID
-            # git push origin bot/merge-to-release-$ISSUEID
-            # gh pr create --base release --head bot/merge-to-release-$ISSUEID --title "Merge main to release" --body ""
-            # gh pr create --base main --head feat/auto-release-pr-624  --title "The bug is fixed" --body "$x" --repo openimsdk/open-im-server --reviewer "cubxxw"
-          continue-on-error: true
-          env:
-              GITHUB_TOKEN: ${{ secrets.BOT_GITHUB_TOKEN }}
-              GH_TOKEN: ${{ github.token }}
-              ISSUE: ${{ github.event.issue.html_url }}
-              OWNER: ${{ github.repository_owner }}
-              REPO: ${{ github.event.repository.name }}
+          # Check if jq is installed
+          if ! command -v jq &> /dev/null; then
+            echo "Installing jq..."
+            sudo apt-get install -y jq
+          fi
+
+          # Parse data with jq
+          LABELS=$(jq -r '.labels | map(.name) | join(",")' issue_data.json)
+          ASSIGNEES=$(jq -r '.assignees | map(.login) | join(",")' issue_data.json)
+          MILESTONE=$(jq -r '.milestone.title' issue_data.json)
+
+          # Check if any of the fields are empty and set them to None
+          LABELS=${LABELS:-None}
+          ASSIGNEES=${ASSIGNEES:-None}
+          MILESTONE=${MILESTONE:-None}
+
+          # Edit the PR with issue details, handling empty fields
+          gh pr edit "${{ github.event.pull_request.number }}" --repo "${{ github.repository }}" \
+            ${LABELS:+--add-label "$LABELS"} \
+            ${ASSIGNEES:+--add-assignee "$ASSIGNEES"} \
+            ${MILESTONE:+--milestone "$MILESTONE"}
+        continue-on-error: true
+        env:
+          GITHUB_TOKEN: ${{ secrets.BOT_GITHUB_TOKEN }}

.github/workflows/auto-invite.yml

@@ -39,7 +39,7 @@ jobs:
             In addition to Slack, we also offer the following ways to get in touch:
             
             + <a href="https://join.slack.com/t/openimsdk/shared_invite/zt-22720d66b-o_FvKxMTGXtcnnnHiMqe9Q" target="_blank"><img src="https://img.shields.io/badge/Slack-OpenIM%2B-blueviolet?logo=slack&amp;logoColor=white"></a> We also have Slack channels for you to communicate and discuss. To join, visit https://slack.com/ and join our [👀 Open-IM-Server slack](https://join.slack.com/t/openimsdk/shared_invite/zt-22720d66b-o_FvKxMTGXtcnnnHiMqe9Q) team channel.
-            + <a href="https://mail.google.com/mail/u/0/?fs=1&tf=cm&to=winxu81@gmail.com" target="_blank"><img src="https://img.shields.io/badge/gmail-%40OOpenIMSDKCore?style=social&logo=gmail"></a> Get in touch with us on [Gmail](https://mail.google.com/mail/u/0/?fs=1&tf=cm&to=winxu81@gmail.com). If you have any questions or issues that need resolving, or any suggestions and feedback for our open source projects, please feel free to contact us via email.
+            + <a href="https://mail.google.com/mail/u/0/?fs=1&tf=cm&to=info@openim.io" target="_blank"><img src="https://img.shields.io/badge/gmail-%40OOpenIMSDKCore?style=social&logo=gmail"></a> Get in touch with us on [Gmail](https://mail.google.com/mail/u/0/?fs=1&tf=cm&to=winxu81@gmail.com). If you have any questions or issues that need resolving, or any suggestions and feedback for our open source projects, please feel free to contact us via email.
             + <a href="https://doc.rentsoft.cn/" target="_blank"><img src="https://img.shields.io/badge/%E5%8D%9A%E5%AE%A2-%40OpenIMSDKCore-blue?style=social&logo=Octopus%20Deploy"></a> Read our [blog](https://doc.rentsoft.cn/). Our blog is a great place to stay up-to-date with Open-IM-Server projects and trends. On the blog, we share our latest developments, tech trends, and other interesting information.
             + <a href="https://github.com/OpenIMSDK/OpenIM-Docs/blob/main/docs/images/WechatIMG20.jpeg" target="_blank"><img src="https://img.shields.io/badge/%E5%BE%AE%E4%BF%A1-OpenIMSDKCore-brightgreen?logo=wechat&style=flat-square"></a> Add [Wechat](https://github.com/OpenIMSDK/OpenIM-Docs/blob/main/docs/images/WechatIMG20.jpeg) and indicate that you are a user or developer of Open-IM-Server. We will process your request as soon as possible.
 

.github/workflows/auto-tag.yml

@@ -12,7 +12,7 @@
 # See the License for the specific language governing permissions and
 # limitations under the License.
 
-name: Create Tag
+name: OpenIM Create Tag
 
 on:
   issue_comment:

.github/workflows/bot-auto-cherry-pick.yml

@@ -12,7 +12,7 @@
 # See the License for the specific language governing permissions and
 # limitations under the License.
 
-name: 'Github Rebot for Cherry Pick when PR is merged'
+name: Github Rebot for Cherry Pick when PR is merged
 on:
   pull_request_target:
     types:

.github/workflows/build-docker-image.yml

@@ -52,6 +52,7 @@ jobs:
             type=ref,event=branch
             type=ref,event=pr
             type=semver,pattern={{version}}
+            type=semver,pattern=v{{version}}
             type=semver,pattern={{major}}.{{minor}}
             type=semver,pattern={{major}}
             type=sha
@@ -87,6 +88,16 @@ jobs:
         uses: docker/metadata-action@v5.0.0
         with:
           images: registry.cn-hangzhou.aliyuncs.com/openimsdk/openim-server
+          # generate Docker tags based on the following events/attributes
+          tags: |
+            type=schedule
+            type=ref,event=branch
+            type=ref,event=pr
+            type=semver,pattern={{version}}
+            type=semver,pattern=v{{version}}
+            type=semver,pattern={{major}}.{{minor}}
+            type=semver,pattern={{major}}
+            type=sha
 
       - name: Log in to AliYun Docker Hub
         uses: docker/login-action@v3
@@ -126,6 +137,7 @@ jobs:
             type=ref,event=branch
             type=ref,event=pr
             type=semver,pattern={{version}}
+            type=semver,pattern=v{{version}}
             type=semver,pattern={{major}}.{{minor}}
             type=semver,pattern={{major}}
             type=sha

.github/workflows/build-openim-web-image.yml

@@ -1,139 +0,0 @@
-# Copyright © 2023 OpenIM open source community. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-name: Build OpenIM Web Docker image
-
-on:
-  schedule:
-  - cron: '30 3 * * *'
-  push:
-    branches:
-      - main
-      - release-*
-    tags:
-      - v*
-  workflow_dispatch:
-
-env:
-  # Common versions
-  GO_VERSION: "1.20"
-
-jobs:
-  build-openim-web-dockerhub:
-    runs-on: ubuntu-latest
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v4
-      - name: Set up QEMU
-        uses: docker/setup-qemu-action@v3
-      - name: Set up Docker Buildx
-        uses: docker/setup-buildx-action@v3
-
-# docker.io/openim/openim-web:latest
-      - name: Extract metadata (tags, labels) for Docker
-        id: meta
-        uses: docker/metadata-action@v5.0.0
-        with:
-          images: openim/openim-web
-          # generate Docker tags based on the following events/attributes
-          tags: |
-            type=schedule
-            type=ref,event=branch
-            type=ref,event=pr
-            type=semver,pattern={{version}}
-            type=semver,pattern={{major}}.{{minor}}
-            type=semver,pattern={{major}}
-            type=sha
-
-      - name: Log in to Docker Hub
-        uses: docker/login-action@v3
-        with:
-          username: ${{ secrets.DOCKER_USERNAME }}
-          password: ${{ secrets.DOCKER_PASSWORD }}
-
-      - name: Build and push Docker image
-        uses: docker/build-push-action@v5
-        with:
-          context: .
-          file: ./build/images/openim-tools/openim-web/Dockerfile
-          platforms: linux/amd64,linux/arm64
-          push: ${{ github.event_name != 'pull_request' }}
-          tags: ${{ steps.meta.outputs.tags }}
-          labels: ${{ steps.meta.outputs.labels }}
-
-  build-openim-web-aliyun:
-    runs-on: ubuntu-latest
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v4
-      - name: Set up QEMU
-        uses: docker/setup-qemu-action@v3
-      - name: Set up Docker Buildx
-        uses: docker/setup-buildx-action@v3
-# registry.cn-hangzhou.aliyuncs.com/openimsdk/openim-web:latest
-      - name: Extract metadata (tags, labels) for Docker
-        id: meta2
-        uses: docker/metadata-action@v5.0.0
-        with:
-          images: registry.cn-hangzhou.aliyuncs.com/openimsdk/openim-web
-
-      - name: Log in to AliYun Docker Hub
-        uses: docker/login-action@v3
-        with:
-          registry: registry.cn-hangzhou.aliyuncs.com
-          username: ${{ secrets.ALIREGISTRY_USERNAME }}
-          password: ${{ secrets.ALIREGISTRY_TOKEN }}
-      
-      - name: Build and push Docker image
-        uses: docker/build-push-action@v5
-        with:
-          context: .
-          file: ./build/images/openim-tools/openim-web/Dockerfile
-          platforms: linux/amd64,linux/arm64
-          push: ${{ github.event_name != 'pull_request' }}
-          tags: ${{ steps.meta2.outputs.tags }}
-          labels: ${{ steps.meta2.outputs.labels }}
-
-  build-openim-web-ghcr:
-    runs-on: ubuntu-latest
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v4
-      - name: Set up QEMU
-        uses: docker/setup-qemu-action@v3
-      - name: Set up Docker Buildx
-        uses: docker/setup-buildx-action@v3
-# ghcr.io/openimsdk/openim-web:latest
-      - name: Extract metadata (tags, labels) for Docker
-        id: meta2
-        uses: docker/metadata-action@v5.0.0
-        with:
-          images: ghcr.io/openimsdk/openim-web
-
-      - name: Log in to GitHub Container Registry
-        uses: docker/login-action@v3
-        with:
-          registry: ghcr.io
-          username: ${{ github.repository_owner }}
-          password: ${{ secrets.GITHUB_TOKEN }}
-
-      - name: Build and push Docker image
-        uses: docker/build-push-action@v5
-        with:
-          context: .
-          file: ./build/images/openim-tools/openim-web/Dockerfile
-          platforms: linux/amd64,linux/arm64
-          push: ${{ github.event_name != 'pull_request' }}
-          tags: ${{ steps.meta2.outputs.tags }}
-          labels: ${{ steps.meta2.outputs.labels }}

.github/workflows/check-coverage.yml

@@ -12,7 +12,7 @@
 # See the License for the specific language governing permissions and
 # limitations under the License.
 
-name: Check-Coverage
+name: OpenIM Check Coverage
 
 on:
   workflow_dispatch:

.github/workflows/cla.yml

@@ -12,7 +12,7 @@
 # See the License for the specific language governing permissions and
 # limitations under the License.
 
-name: "OpenIM CLA Assistant"
+name: OpenIM CLA Assistant
 on:
   issue_comment:
     types: [created]
@@ -33,7 +33,7 @@ env:
   OPEN_IM_SERVER_CLA_DOCUMENT: https://github.com/openim-sigs/cla/blob/main/README.md
   OPEN_IM_SERVER_SIGNATURES_PATH: signatures/${{ github.event.repository.name }}/cla.json
 
-  OPEN_IM_SERVER_ALLOWLIST: kubbot,bot* 
+  OPEN_IM_SERVER_ALLOWLIST: kubbot,bot*,bot-*,bot/*,bot-/*,bot,*[bot]
 
 jobs:
   CLAAssistant:

.github/workflows/create-branch-on-tag.yml

@@ -19,6 +19,10 @@ on:
     tags:
       - 'v*.*.0'
 
+permissions:
+  contents: write
+  actions: write
+
 jobs:
   create-branch:
     runs-on: ubuntu-latest
@@ -36,41 +40,38 @@ jobs:
     - name: Install git-chglog
       run: make install.git-chglog
 
-    - name: Create Branch
+    - name: Create Branch and Push
+      env:
+        TAG_NAME: ${{ github.ref_name }}
       run: |
-        TAG_NAME=${GITHUB_REF/refs\/tags\//}
         IFS='.' read -ra VERSION_PARTS <<< "$TAG_NAME"
         if [[ "${VERSION_PARTS[2]}" = "0" ]]; then
           BRANCH_NAME="release-v${VERSION_PARTS[0]}.${VERSION_PARTS[1]}"
           echo "Creating branch $BRANCH_NAME"
           git checkout -b "$BRANCH_NAME"
           git push origin "$BRANCH_NAME"
+        else
+          echo "Not a release tag. Skipping branch creation."
         fi
+      continue-on-error: true
 
-    - name: Push Changes
-      uses: stefanzweifel/git-auto-commit-action@v5
-      with:
-        commit_message: "Auto Commit CHANGELOG"
-        branch: release-v${VERSION_PARTS[0]}.${VERSION_PARTS[1]}
-      env:
-        GITHUB_TOKEN: ${{ secrets.BOT_GITHUB_TOKEN }}
-
-    - name: Create and Push CHANGELOG
+    - name: Create and Commit CHANGELOG
+      if: endsWith(github.ref_name, '.0')
       run: |
-        git checkout main
-        TAG_NAME=${GITHUB_REF/refs\/tags\//}
+        git fetch --all
+        TAG_NAME=${GITHUB_REF#refs/tags/}
         IFS='.' read -ra VERSION_PARTS <<< "$TAG_NAME"
-        if [[ "${VERSION_PARTS[2]}" = "0" ]]; then
-          cd CHANGELOG
-          git-chglog --tag-filter-pattern "v${VERSION_PARTS[0]}.${VERSION_PARTS[1]}.*"  -o "CHANGELOG-${VERSION_PARTS[0]}.${VERSION_PARTS[1]}.md"
-          git add "CHANGELOG-${VERSION_PARTS[0]}.${VERSION_PARTS[1]}.md"
-          git commit -m "Update CHANGELOG for $TAG_NAME"
-        fi
+        git checkout main
+        cd CHANGELOG
+        git-chglog --tag-filter-pattern "v${VERSION_PARTS[0]}.${VERSION_PARTS[1]}.*" -o "CHANGELOG-${VERSION_PARTS[0]}.${VERSION_PARTS[1]}.md"
+        git add "CHANGELOG-${VERSION_PARTS[0]}.${VERSION_PARTS[1]}.md"
+        git commit -m "Update CHANGELOG for $TAG_NAME" || echo "No changes to commit."
+      continue-on-error: true
 
-    - name: Push Changes
-      uses: stefanzweifel/git-auto-commit-action@v5
+    - name: Push CHANGELOG to Main
+      if: steps.create-and-commit-changelog.outputs.changes == 'true'
+      uses: ad-m/github-push-action@v0.6.0
       with:
-        commit_message: "Auto Commit CHANGELOG"
+        github_token: ${{ secrets.BOT_GITHUB_TOKEN }}
         branch: main
-      env:
-        GITHUB_TOKEN: ${{ secrets.BOT_GITHUB_TOKEN }}
+    continue-on-error: true

.github/workflows/deploy.yml

@@ -1,55 +0,0 @@
-# Copyright © 2023 OpenIM open source community. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-name: OpenIM Deploy for dev
-
-on:
-  push:
-    branches:
-      - 'devops' # Only for the dev branch
-      - 'main'
-    paths:
-      - '.github/workflows/*'
-      # - '__test__/**' # dev No immediate testing is required
-      - 'src/**'
-      - 'Dockerfile'
-      - 'docker-compose.yml'
-      - 'bin/*'
-
-jobs:
-  deploy-dev:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v4
-      - name: executing remote ssh commands using password
-        uses: appleboy/ssh-action@v1.0.0
-        env:
-            OWNER: ${{ github.repository_owner }}
-            REPO: ${{ github.event.repository.name }}
-        with:
-          host: "${{ secrets.SG_M1_HOST }}, ${{ secrets.SG_N1_HOST }}, ${{ secrets.SG_N2_HOST}}"
-          username: ${{ secrets.SG_USERNAME }}
-          password: ${{ secrets.SG_PASSWORD }}
-          port: ${{ secrets.SG_PORT }}
-          envs: OWNER,REPO
-          script_stop: true
-          script: |
-            mkdir -p /test/openim
-            cd /test/openim
-            pwd;ls -al
-            echo "OWNER: $OWNER"
-            echo "REPO: $REPO"
-            git clone -b develop https://github.com/${OWNER}/${REPO}.git; cd ${REPO}
-            docker compose up -d
-        continue-on-error: true

.github/workflows/depsreview.yaml

@@ -2,7 +2,7 @@
 # Licensed under the MIT License (the "License");
 # you may not use this file except in compliance with the License.
 
-name: Dependency Review
+name: OpenIM Dependency Review
 on: [pull_request]
 
 permissions:

.github/workflows/docker-buildx.yml

@@ -104,8 +104,8 @@ jobs:
         with:
           images: |
             ghcr.io/openimsdk/openim-api
-            docker.io/openimsdk/openim-api
-            registry.cn-shanghai.aliyuncs.com/openimsdk/openim-api
+            openim/openim-api
+            registry.cn-hangzhou.aliyuncs.com/openimsdk/openim-api
 
       - name: Build and push Docker image for openim-api
         uses: docker/build-push-action@v5
@@ -125,8 +125,8 @@ jobs:
         with:
           images: |
             ghcr.io/openimsdk/openim-cmdutils
-            docker.io/openimsdk/openim-cmdutils
-            registry.cn-shanghai.aliyuncs.com/openimsdk/openim-cmdutils
+            openim/openim-cmdutils
+            registry.cn-hangzhou.aliyuncs.com/openimsdk/openim-cmdutils
 
       - name: Build and push Docker image for openim-cmdutils
         uses: docker/build-push-action@v5
@@ -146,8 +146,8 @@ jobs:
         with:
           images: |
             ghcr.io/openimsdk/openim-crontask
-            docker.io/openimsdk/openim-crontask
-            registry.cn-shanghai.aliyuncs.com/openimsdk/openim-crontask
+            openim/openim-crontask
+            registry.cn-hangzhou.aliyuncs.com/openimsdk/openim-crontask
 
       - name: Build and push Docker image for openim-crontask
         uses: docker/build-push-action@v5
@@ -167,8 +167,8 @@ jobs:
         with:
           images: |
             ghcr.io/openimsdk/openim-msggateway
-            docker.io/openimsdk/openim-msggateway
-            registry.cn-shanghai.aliyuncs.com/openimsdk/openim-msggateway
+            openim/openim-msggateway
+            registry.cn-hangzhou.aliyuncs.com/openimsdk/openim-msggateway
 
       - name: Build and push Docker image for openim-msggateway
         uses: docker/build-push-action@v5
@@ -188,8 +188,8 @@ jobs:
         with:
           images: |
             ghcr.io/openimsdk/openim-msgtransfer
-            docker.io/openimsdk/openim-msgtransfer
-            registry.cn-shanghai.aliyuncs.com/openimsdk/openim-msgtransfer
+            openim/openim-msgtransfer
+            registry.cn-hangzhou.aliyuncs.com/openimsdk/openim-msgtransfer
 
       - name: Build and push Docker image for openim-msgtransfer
         uses: docker/build-push-action@v5
@@ -209,8 +209,8 @@ jobs:
         with:
           images: |
             ghcr.io/openimsdk/openim-push
-            docker.io/openimsdk/openim-push
-            registry.cn-shanghai.aliyuncs.com/openimsdk/openim-push
+            openim/openim-push
+            registry.cn-hangzhou.aliyuncs.com/openimsdk/openim-push
 
       - name: Build and push Docker image for openim-push
         uses: docker/build-push-action@v5
@@ -230,8 +230,8 @@ jobs:
         with:
           images: |
             ghcr.io/openimsdk/openim-rpc-auth
-            docker.io/openimsdk/openim-rpc-auth
-            registry.cn-shanghai.aliyuncs.com/openimsdk/openim-rpc-auth
+            openim/openim-rpc-auth
+            registry.cn-hangzhou.aliyuncs.com/openimsdk/openim-rpc-auth
 
       - name: Build and push Docker image for openim-rpc-auth
         uses: docker/build-push-action@v5
@@ -251,8 +251,8 @@ jobs:
         with:
           images: |
             ghcr.io/openimsdk/openim-rpc-conversation
-            docker.io/openimsdk/openim-rpc-conversation
-            registry.cn-shanghai.aliyuncs.com/openimsdk/openim-rpc-conversation
+            openim/openim-rpc-conversation
+            registry.cn-hangzhou.aliyuncs.com/openimsdk/openim-rpc-conversation
 
       - name: Build and push Docker image for openim-rpc-conversation
         uses: docker/build-push-action@v5
@@ -272,8 +272,8 @@ jobs:
         with:
           images: |
             ghcr.io/openimsdk/openim-rpc-friend
-            docker.io/openimsdk/openim-rpc-friend
-            registry.cn-shanghai.aliyuncs.com/openimsdk/openim-rpc-friend
+            openim/openim-rpc-friend
+            registry.cn-hangzhou.aliyuncs.com/openimsdk/openim-rpc-friend
 
       - name: Build and push Docker image for openim-rpc-friend
         uses: docker/build-push-action@v5
@@ -293,8 +293,8 @@ jobs:
         with:
           images: |
             ghcr.io/openimsdk/openim-rpc-group
-            docker.io/openimsdk/openim-rpc-group
-            registry.cn-shanghai.aliyuncs.com/openimsdk/openim-rpc-group
+            openim/openim-rpc-group
+            registry.cn-hangzhou.aliyuncs.com/openimsdk/openim-rpc-group
 
       - name: Build and push Docker image for openim-rpc-group
         uses: docker/build-push-action@v5
@@ -314,8 +314,8 @@ jobs:
         with:
           images: |
             ghcr.io/openimsdk/openim-rpc-msg
-            docker.io/openimsdk/openim-rpc-msg
-            registry.cn-shanghai.aliyuncs.com/openimsdk/openim-rpc-msg
+            openim/openim-rpc-msg
+            registry.cn-hangzhou.aliyuncs.com/openimsdk/openim-rpc-msg
 
       - name: Build and push Docker image for openim-rpc-msg
         uses: docker/build-push-action@v5
@@ -335,8 +335,8 @@ jobs:
         with:
           images: |
             ghcr.io/openimsdk/openim-rpc-third
-            docker.io/openimsdk/openim-rpc-third
-            registry.cn-shanghai.aliyuncs.com/openimsdk/openim-rpc-third
+            openim/openim-rpc-third
+            registry.cn-hangzhou.aliyuncs.com/openimsdk/openim-rpc-third
 
       - name: Build and push Docker image for openim-rpc-third
         uses: docker/build-push-action@v5
@@ -356,8 +356,8 @@ jobs:
         with:
           images: |
             ghcr.io/openimsdk/openim-rpc-user
-            docker.io/openimsdk/openim-rpc-user
-            registry.cn-shanghai.aliyuncs.com/openimsdk/openim-rpc-user
+            openim/openim-rpc-user
+            registry.cn-hangzhou.aliyuncs.com/openimsdk/openim-rpc-user
 
       - name: Build and push Docker image for openim-rpc-user
         uses: docker/build-push-action@v5

.github/workflows/e2e-test.yml

@@ -12,7 +12,7 @@
 # See the License for the specific language governing permissions and
 # limitations under the License.
 
-name: e2e
+name: OpenIM Linux System E2E Test
 
 on:
   workflow_dispatch:
@@ -22,6 +22,9 @@ on:
     # run e2e test every 4 hours
     - cron: 0 */4 * * *
 
+env:
+  CALLBACK_ENABLE: true
+
 jobs:
   build:
     name: Test
@@ -41,4 +44,71 @@ jobs:
 
       - name: Create e2e test
         run: |
-          echo "...test e2e"
+          echo "...test e2e"
+
+  execute-linux-systemd-scripts:
+    name: Execute OpenIM script on ${{ matrix.os }}
+    runs-on: ${{ matrix.os }}
+    environment:
+      name: openim
+    strategy:
+      matrix:
+        go_version: ["1.20"]
+        os: ["ubuntu-latest"]
+    steps:
+    - name: Checkout code
+      uses: actions/checkout@v4
+
+    - name: Set up Go ${{ matrix.go_version }}
+      uses: actions/setup-go@v4
+      with:
+        go-version: ${{ matrix.go_version }}
+      id: go
+
+    - name: Install Task
+      uses: arduino/setup-task@v1
+      with:
+        version: '3.x' # If available, use the latest major version that's compatible
+        repo-token: ${{ secrets.GITHUB_TOKEN }}
+
+    - name: Docker Operations
+      run: |
+        sudo make init
+        sudo docker compose up -d
+        sudo sleep 20
+
+    - name: Module Operations
+      run: |
+        sudo make tidy
+        sudo make tools.verify.go-gitlint
+
+    - name: Build, Start
+      run: |
+        sudo ./scripts/install/install.sh -i
+
+    - name: Exec OpenIM System Status Chack
+      run: |
+        sudo ./scripts/install/install.sh -s
+
+    - name: Exec OpenIM API test
+      run: |
+        sudo make test-api
+    
+    - name: Exec OpenIM E2E test
+      run: |
+        sudo make test-e2e
+
+    - name: Exec OpenIM System uninstall
+      run: |
+        sudo ./scripts/install/install.sh -u
+
+    - name: gobenchdata publish
+      uses: bobheadxi/gobenchdata@v1
+      with:
+        PRUNE_COUNT: 30
+        GO_TEST_FLAGS: -cpu 1,2
+        PUBLISH: true
+        PUBLISH_BRANCH: gh-pages
+      env:
+        GITHUB_TOKEN: ${{ secrets.BOT_GITHUB_TOKEN }}
+      continue-on-error: true

.github/workflows/greetings.yml

@@ -12,7 +12,7 @@
 # See the License for the specific language governing permissions and
 # limitations under the License.
 
-name: first-interaction
+name: OpenIM First Interaction
 
 on:
   issues:

.github/workflows/issue-robot.yml

@@ -12,7 +12,7 @@
 # See the License for the specific language governing permissions and
 # limitations under the License.
 
-name: 'issue translator'
+name: OpenIM Issue Aotu Translator
 on:
   issue_comment:
     types: [created]

.github/workflows/link-pr.yml

@@ -41,7 +41,7 @@ jobs:
             # ./*.md all markdown files in the root directory
           args: --verbose  -E -i --no-progress --exclude-path './CHANGELOG' './**/*.md'
         env:
-          GITHUB_TOKEN: ${{secrets.GH_PAT}}
+          GITHUB_TOKEN: ${{secrets.BOT_GITHUB_TOKEN}}
 
       - name: Create Issue From File
         if: env.lychee_exit_code != 0

.github/workflows/opencommit.yml

@@ -12,12 +12,13 @@
 # See the License for the specific language governing permissions and
 # limitations under the License.
 
-name: 'OpenIM Commit Action'
+name: OpenIM OpenCommit Action
 
 on:
   push:
-    branches:
-      - main
+    # this list of branches is often enough,
+    # but you may still ignore other public branches
+    branches-ignore: [main master dev development release]
 
 jobs:
   opencommit:
@@ -27,20 +28,20 @@ jobs:
     permissions: write-all
     steps:
       - name: Setup Node.js Environment
-        uses: actions/setup-node@v3
+        uses: actions/setup-node@v2
         with:
           node-version: '16'
-      - uses: actions/checkout@v4
+      - uses: actions/checkout@v3
         with:
           fetch-depth: 0
       - uses: di-sukharev/opencommit@github-action-v1.0.4
         with:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+          GITHUB_TOKEN: ${{ secrets.BOT_GITHUB_TOKEN }}
 
         env:
           # set openAI api key in repo actions secrets,
           # for openAI keys go to: https://platform.openai.com/account/api-keys
-          # for repo secret go to: https://github.com/kuebcub/settings/secrets/actions
+          # for repo secret go to: <your_repo_url>/settings/secrets/actions
           OCO_OPENAI_API_KEY: ${{ secrets.OPENAI_API_KEY }}
 
           # customization
@@ -48,5 +49,7 @@ jobs:
           OCO_OPENAI_BASE_PATH: ''
           OCO_DESCRIPTION: false
           OCO_EMOJI: false
-          OCO_MODEL: gpt-3.5-turbo
-          OCO_LANGUAGE: en
+          OCO_MODEL: gpt-3.5-turbo-16k
+          OCO_LANGUAGE: en
+          OCO_PROMPT_MODULE: conventional-commit
+        continue-on-error: true

.github/workflows/openimci.yml

@@ -64,7 +64,8 @@ jobs:
     - name: Install Task
       uses: arduino/setup-task@v1
       with:
-        version: 2.x
+        version: '3.x' # If available, use the latest major version that's compatible
+        repo-token: ${{ secrets.GITHUB_TOKEN }}
 
     - name: Module Operations
       run: |
@@ -122,7 +123,8 @@ jobs:
     - name: Install Task
       uses: arduino/setup-task@v1
       with:
-        version: 2.x
+        version: '3.x' # If available, use the latest major version that's compatible
+        repo-token: ${{ secrets.GITHUB_TOKEN }}
     - name: Run OpenIM make install start
       run: |
         sudo make install
@@ -145,33 +147,33 @@ jobs:
       with:
         go-version: ${{ matrix.go_version }}
       id: go
+
     - name: Install Task
       uses: arduino/setup-task@v1
       with:
-        version: 2.x
+        version: '3.x' # If available, use the latest major version that's compatible
+        repo-token: ${{ secrets.GITHUB_TOKEN }}
+
     - name: Docker Operations
       run: |
-        curl -o docker-compose.yml https://raw.githubusercontent.com/OpenIMSDK/openim-docker/main/example/basic-openim-server-dependency.yml
+        sudo make init
         sudo docker compose up -d
-        sudo sleep 60
+        sudo sleep 20
 
     - name: Module Operations
       run: |
         sudo make tidy
         sudo make tools.verify.go-gitlint
 
-    - name: Build, Start and Check Services
+    - name: Build, Start, Check Services and Print Logs
       run: |
-        sudo make init
-        sudo make build
-        sudo make start
-        sudo make check
+        sudo make init && \
+        sudo make build && \
+        sudo make start && \
+        sudo make check || \
+        (echo "An error occurred, printing logs:" && sudo cat ./_output/logs/* 2>/dev/null)
 
-    - name: Print OpenIM Logs
-      run: sudo cat ./_output/logs/* 2>/dev/null
-      continue-on-error: true
-
-  openim-build-image:
+  openim-test-build-image:
     name: Build OpenIM Docker Image
     runs-on: ubuntu-latest
     environment:
@@ -184,10 +186,14 @@ jobs:
       with:
         go-version: ${{ matrix.go_version }}
       id: go
+
     - name: Install Task
       uses: arduino/setup-task@v1
       with:
-        version: 2.x
+        version: '3.x' # If available, use the latest major version that's compatible
+        repo-token: ${{ secrets.GITHUB_TOKEN }}
+
     - name: Test Docker Build
       run: |
+        sudo make init
         sudo make image

.github/workflows/pull-request.yml

@@ -41,8 +41,10 @@ jobs:
         run: |
           git config user.name 'openimbot'
           git config user.email 'openimsdk@qq.com'
-          git checkout -b cicd/patch-${{ github.event.number }}
-      - uses: actions/setup-node@v3
+          BRANCH_NAME="auto-pr-$(date +'%Y%m%d%H%M%S')"
+          git checkout -b $BRANCH_NAME
+
+      - uses: actions/setup-node@v4
       - name: Setup Go
         uses: actions/setup-go@v4
       - name: Run go modules tidy
@@ -50,6 +52,7 @@ jobs:
           sudo make tidy
           sudo make tools.verify.go-gitlint
           echo "Run go modules tidy successfully" 
+        continue-on-error: true
 
       - name: Run go format
         run: |
@@ -75,13 +78,8 @@ jobs:
           echo "Run unit test and get test coverage successfully" 
         continue-on-error: true
 
-    #   - name: Initialize CodeQL
-    #     uses: github/codeql-action/init@v2
-    #     with:
-    #       languages: go
-
-    #   - name: Perform CodeQL Analysis
-        # uses: github/codeql-action/analyze@v2
+      - name: Perform CodeQL Analysis
+        uses: github/codeql-action/analyze@v2
 
       - name: OpenIM verify copyright
         run: |
@@ -89,31 +87,26 @@ jobs:
           sudo make add-copyright
           echo "OpenIM verify successfully" 
         continue-on-error: true
-      
-    #   - name: Commit code
-    #     run: |
-    #         git add .
-    #         git commit -m "cicd: bump League Patch to cicd/patch-${{ github.event.number }}"
-    
+
       - name: Create Pull Request
         uses: peter-evans/create-pull-request@v5
         with:
           token: ${{ secrets.BOT_GITHUB_TOKEN }}
-          commit-message: "cicd: bump League Patch to cicd/patch-${{ github.event.number }}"
-          title: Bump League Patch to cicd/patch-${{ github.event.number }}
+          commit-message: "cicd: bump League Patch"
           author: kubbot <kubbot@3293172751ysy@gmail.com>
           signoff: false
           draft: false
-          branch: "cicd/patch-${{ github.event.number }}"
+          branch: ''
           assignees: cubxxw
           reviewers: cubxxw
           delete-branch: true
+          title: "Bump League Patch auto PR: $(date +'%Y%m%d')"
           body: |
             Review criteria:
 
             - [ ] Disenchanter can connect and issue actions
             
-            This is an automated PR. @ ${{ github.actor }}
+            This is an automated PR. @ $(date +'%Y%m%d')
             <sub>[workflow](https://github.com/openimsdk/open-im-server/blob/main/.github/workflows/pull-request.yml).</sub>
           base: main
           labels: |

.github/workflows/scripts-verify.yml

@@ -1,76 +0,0 @@
-# Copyright © 2023 OpenIM. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-name: OpenIM executes the script validation code
-
-on: 
-  push:
-    branches:
-        - main
-    paths-ignore:
-        - "docs/**"
-        - "README.md"
-        - "README_zh-CN.md"
-        - "CONTRIBUTING.md"
-  pull_request:
-    branches:
-        - main
-    paths-ignore:
-        - "README.md"
-        - "README_zh-CN.md"
-        - "CONTRIBUTING.md"
-        - "docs/**"
-
-env:
-  GO_VERSION: "1.19"
-  GOLANGCI_VERSION: "v1.50.1"
-
-jobs:
-  openim:
-    name: Test with go ${{ matrix.go_version }} on ${{ matrix.os }}
-    runs-on: ${{ matrix.os }}
-    permissions:
-        contents: write
-    environment:
-      name: openim
-
-    strategy:
-      matrix:
-        go_version: ["1.21"]
-        os: [ubuntu-latest]
-
-    steps:
-    - name: Setup
-      uses: actions/checkout@v4
-      
-    - name: In ${{ matrix.os }} Execute the script validation code
-      uses: actions/setup-go@v4
-      with:
-        go-version: ${{ matrix.go_version }}
-      id: go
-
-    - name: scripts validation
-      run: |
-        sudo make verify
-      continue-on-error: true
-
-    - name: verify format
-      run: |
-        sudo make format
-      continue-on-error: true
-
-    - name: verify license
-      run: |
-        sudo make verify-copyright
-      continue-on-error: true

.gitignore

@@ -29,6 +29,7 @@ tmp/
 bin/
 output/
 _output/
+deployments/charts/generated-configs/
 
 ### OpenIM Config ###
 config/config.yaml
@@ -390,3 +391,5 @@ Sessionx.vim
 dist/
 .env
 config/config.yaml
+config/alertmanager.yml
+config/prometheus.yml

.golangci.yml

@@ -171,7 +171,7 @@ linters-settings:
   #   exclude_godoc_examples: false
   funlen:
     lines: 150
-    statements: 50
+    statements: 80
   gci:
     # put imports beginning with prefix after 3rd-party packages;
     # only support one prefix

CHANGELOG/CHANGELOG.md

@@ -20,7 +20,7 @@ All notable changes to this project will be documented in this file.
 
 ## OpenIM versioning policy
 
-+ [OpenIM Version](../docs/conversions/version.md)
++ [OpenIM Version](../docs/contrib/version.md)
 
 ## command
 

CODE_OF_CONDUCT.md

@@ -60,7 +60,7 @@ representative at an online or offline event.
 
 Instances of abusive, harassing, or otherwise unacceptable behavior may be
 reported to the community leaders responsible for enforcement at
-3293172751nss@gmail.com.
+`security@openim.io`.
 All complaints will be reviewed and investigated promptly and fairly.
 
 All community leaders are obligated to respect the privacy and security of the

CONTRIBUTING.md

@@ -42,6 +42,12 @@ If you are familiar with [Makefile](./Makefile) , you can easily see the clever
 
 The [Makefile](./Makefile) is for every developer, even if you don't know how to use the Makefile tool, don't worry, we provide two great commands to get you up to speed with the Makefile architecture, `make help` and `make help-all`, it can reduce problems of the developing environment.
 
+In accordance with the naming conventions adopted by OpenIM and drawing reference from the Google Naming Conventions as per the guidelines available at https://google.github.io/styleguide/go/, the following expectations for naming practices within the project are set forth: 
+
++ https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/code-conventions.md
++ https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/go-code.md
+
+
 ## Code of ConductCode of Conduct
 
 #### Code and doc contribution
@@ -186,7 +192,7 @@ We divide the problem into security and general problems:
 
 Security issues are always treated seriously. As our usual principle, we discourage anyone to spread security issues. If you find a security issue of Open-IM-Server, please do not discuss it in public and even do not open a public issue.
 
-Instead we encourage you to send us a private email to winxu81@gmail.com to report this.
+Instead we encourage you to send us a private email to info@openim.io to report this.
 
 #### Reporting general issues
 
@@ -270,7 +276,7 @@ You can find some very formal PR in [RFC](https://github.com/openimsdk/open-im-s
 **🈴 Reviewing PRs:**
 
 + Be respectful and constructive 
-+ Assign yourself to the PR 
++ Assign yourself to the PR (comment `/assign`)
 + Check if all checks are passing
 + Suggest changes instead of simply commenting on found issues
 + If you are unsure about something, ask the author
@@ -369,7 +375,7 @@ Our most recommended way to get in touch is through [Slack](https://join.slack.c
 In addition to Slack, we also offer the following ways to get in touch:
 
 + <a href="https://join.slack.com/t/openimsdk/shared_invite/zt-22720d66b-o_FvKxMTGXtcnnnHiMqe9Q" target="_blank"><img src="https://img.shields.io/badge/slack-%40OpenIMSDKCore-informational?logo=slack&style=flat-square"></a>:  We also have Slack channels for you to communicate and discuss. To join, visit https://slack.com/ and join our [👀 Open-IM-Server slack](https://join.slack.com/t/openimsdk/shared_invite/zt-22720d66b-o_FvKxMTGXtcnnnHiMqe9Q) team channel.
-+ <a href="https://mail.google.com/mail/u/0/?fs=1&tf=cm&to=4closetool3@gmail.com" target="_blank"><img src="https://img.shields.io/badge/gmail-%40OOpenIMSDKCore?style=social&logo=gmail"></a>: Get in touch with us on [Gmail](winxu81@gmail.com). If you have any questions or issues that need resolving, or any suggestions and feedback for our open source projects, please feel free to contact us via email.
++ <a href="https://mail.google.com/mail/u/0/?fs=1&tf=cm&to=4closetool3@gmail.com" target="_blank"><img src="https://img.shields.io/badge/gmail-%40OOpenIMSDKCore?style=social&logo=gmail"></a>: Get in touch with us on [Gmail](info@openim.io). If you have any questions or issues that need resolving, or any suggestions and feedback for our open source projects, please feel free to contact us via email.
 + <a href="https://doc.rentsoft.cn/" target="_blank"><img src="https://img.shields.io/badge/%E5%8D%9A%E5%AE%A2-%40OpenIMSDKCore-blue?style=social&logo=Octopus%20Deploy"></a>: Read our [blog](https://doc.rentsoft.cn/). Our blog is a great place to stay up-to-date with Open-IM-Server projects and trends. On the blog, we share our latest developments, tech trends, and other interesting information.
 + <a href="https://github.com/OpenIMSDK/OpenIM-Docs/blob/main/docs/images/WechatIMG20.jpeg" target="_blank"><img src="https://img.shields.io/badge/%E5%BE%AE%E4%BF%A1-OpenIMSDKCore-brightgreen?logo=wechat&style=flat-square"></a>: Add [Wechat](https://github.com/OpenIMSDK/OpenIM-Docs/blob/main/docs/images/WechatIMG20.jpeg) and indicate that you are a user or developer of Open-IM-Server. We will process your request as soon as possible.
 

Dockerfile

@@ -25,7 +25,8 @@ WORKDIR ${SERVER_WORKDIR}
 
 # Copy scripts and binary files to the production image
 COPY --from=builder ${OPENIM_SERVER_BINDIR} /openim/openim-server/_output/bin
-# COPY --from=builder ${OPENIM_SERVER_CMDDIR} /openim/openim-server/scripts
-# COPY --from=builder ${SERVER_WORKDIR}/config /openim/openim-server/config
+COPY --from=builder ${OPENIM_SERVER_CMDDIR} /openim/openim-server/scripts
+COPY --from=builder ${SERVER_WORKDIR}/config /openim/openim-server/config
+COPY --from=builder ${SERVER_WORKDIR}/deployments /openim/openim-server/deployments
 
 CMD ["/openim/openim-server/scripts/docker-start-all.sh"]

Makefile

@@ -6,7 +6,7 @@
 
 ## all: Run tidy, gen, add-copyright, format, lint, cover, build ✨
 .PHONY: all
-all: tidy gen add-copyright verify lint cover restart
+all: tidy gen add-copyright verify test-api lint cover restart
 
 # ==============================================================================
 # Build set
@@ -93,7 +93,7 @@ start:
 stop:
 	@$(MAKE) go.stop
 
-## restart: Restart openim ✨
+## restart: Restart openim (make init configuration file is initialized) ✨
 .PHONY: restart
 restart: clean stop build init start check
 
@@ -166,6 +166,15 @@ test:
 cover:
 	@$(MAKE) go.test.cover
 
+## test-api: Run api test. ✨
+.PHONY: test-api
+test-api:
+	@$(MAKE) go.test.api
+
+## test-e2e: Run e2e test
+test-e2e:
+	@$(MAKE) go.test.e2e
+
 ## updates: Check for updates to go.mod dependencies. ✨
 .PHONY: updates
 	@$(MAKE) go.updates

README-zh_CN.md

@@ -29,6 +29,10 @@
 
 </p>
 
+## 🟢 扫描微信进群交流
+<img src="./docs/images/Wechat.jpg" width="300">
+
+
 ## Ⓜ️ 关于 OpenIM
 
 OpenIM 不仅仅是一个开源的即时消息组件，它是你的应用程序生态系统的一个不可或缺的部分。查看下面的图表，了解 AppServer、AppClient、OpenIMServer 和 OpenIMSDK 是如何交互的。
@@ -86,22 +90,22 @@ OpenIM 我们的目标是建立一个顶级的开源社区。我们有一套标
 
 在开始之前，请确保你的更改是有需求的。最好的方法是创建一个[新的讨论](https://github.com/openimsdk/open-im-server/discussions/new/choose) 或 [Slack 通信](https://join.slack.com/t/openimsdk/shared_invite/zt-22720d66b-o_FvKxMTGXtcnnnHiMqe9Q)，或者如果你发现一个问题，首先[报告它](https://github.com/openimsdk/open-im-server/issues/new/choose)。
 
-+ [代码标准](https://github.com/openimsdk/open-im-server/blob/main/docs/conversions/go_code.md)
++ [代码标准](https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/go-code.md)
 
-+ [Docker 镜像标准](https://github.com/openimsdk/open-im-server/blob/main/docs/conversions/images.md)
++ [Docker 镜像标准](https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/images.md)
 
-+ [目录标准](https://github.com/openimsdk/open-im-server/blob/main/docs/conversions/directory.md)
++ [目录标准](https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/directory.md)
 
-+ [提交标准](https://github.com/openimsdk/open-im-server/blob/main/docs/conversions/commit.md)
++ [提交标准](https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/commit.md)
 
-+ [版本控制标准](https://github.com/openimsdk/open-im-server/blob/main/docs/conversions/version.md)
++ [版本控制标准](https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/version.md)
 
-+ [接口标准](https://github.com/openimsdk/open-im-server/blob/main/docs/conversions/interface.md)
++ [接口标准](https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/interface.md)
 
 + [OpenIM配置和环境变量设置](https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/environment.md)
 
 > **Note**
-> 针对中国的用户，阅读我们的 [Docker 镜像标准](https://github.com/openimsdk/open-im-server/blob/main/docs/conversions/images.md) 以便使用国内 aliyun 的镜像地址。OpenIM 也有针对中国的 gitee 同步仓库，你可以在 [gitee.com](https://gitee.com/openimsdk) 上找到它。
+> 针对中国的用户，阅读我们的 [Docker 镜像标准](https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/images.md) 以便使用国内 aliyun 的镜像地址。OpenIM 也有针对中国的 gitee 同步仓库，你可以在 [gitee.com](https://gitee.com/openimsdk) 上找到它。
 
 ## :link: 链接
 

README.md

@@ -4,30 +4,27 @@
     </a>
 </p>
 
-<h3 align="center" style="border-bottom: none">
-    ⭐️  Open source Instant Messaging Server ⭐️ <br>
-<h3>
+<div align="center">
 
+[![Stars](https://img.shields.io/github/stars/openimsdk/open-im-server?style=for-the-badge&logo=github&colorB=ff69b4)](https://github.com/openimsdk/open-im-server/stargazers)
+[![Forks](https://img.shields.io/github/forks/openimsdk/open-im-server?style=for-the-badge&logo=github&colorB=blue)](https://github.com/openimsdk/open-im-server/network/members)
+[![Codecov](https://img.shields.io/codecov/c/github/openimsdk/open-im-server?style=for-the-badge&logo=codecov&colorB=orange)](https://app.codecov.io/gh/openimsdk/open-im-server)
+[![Go Report Card](https://goreportcard.com/badge/github.com/openimsdk/open-im-server?style=for-the-badge)](https://goreportcard.com/report/github.com/openimsdk/open-im-server)
+[![Go Reference](https://img.shields.io/badge/Go%20Reference-blue.svg?style=for-the-badge&logo=go&logoColor=white)](https://pkg.go.dev/github.com/openimsdk/open-im-server/v3)
+[![License](https://img.shields.io/badge/license-Apache--2.0-green?style=for-the-badge)](https://github.com/openimsdk/open-im-server/blob/main/LICENSE)
+[![Slack](https://img.shields.io/badge/Slack-500%2B-blueviolet?style=for-the-badge&logo=slack&logoColor=white)](https://join.slack.com/t/openimsdk/shared_invite/zt-22720d66b-o_FvKxMTGXtcnnnHiMqe9Q)
+[![Best Practices](https://img.shields.io/badge/Best%20Practices-purple?style=for-the-badge)](https://www.bestpractices.dev/projects/8045)
+[![Good First Issues](https://img.shields.io/github/issues/openimsdk/open-im-server/good%20first%20issue?style=for-the-badge&logo=github)](https://github.com/openimsdk/open-im-server/issues?q=is%3Aissue+is%3Aopen+sort%3Aupdated-desc+label%3A%22good+first+issue%22)
+[![Language](https://img.shields.io/badge/Language-Go-blue.svg?style=for-the-badge&logo=go&logoColor=white)](https://golang.org/)
 
-<p align=center>
-<a href="https://goreportcard.com/report/github.com/openimsdk/open-im-server"><img src="https://goreportcard.com/badge/github.com/openimsdk/open-im-server" alt="A+"></a>
-<a href="https://github.com/openimsdk/open-im-server/issues?q=is%3Aissue+is%3Aopen+sort%3Aupdated-desc+label%3A%22good+first+issue%22"><img src="https://img.shields.io/github/issues/openimsdk/open-im-server/good%20first%20issue?logo=%22github%22" alt="good first"></a>
-<a href="https://github.com/openimsdk/open-im-server"><img src="https://img.shields.io/github/stars/openimsdk/open-im-server.svg?style=flat&logo=github&colorB=deeppink&label=stars"></a>
-<a href="https://join.slack.com/t/openimsdk/shared_invite/zt-22720d66b-o_FvKxMTGXtcnnnHiMqe9Q"><img src="https://img.shields.io/badge/Slack-300%2B-blueviolet?logo=slack&amp;logoColor=white"></a>
-<a href="https://github.com/openimsdk/open-im-server/blob/main/LICENSE"><img src="https://img.shields.io/badge/license-Apache--2.0-green"></a>
-<a href="https://golang.org/"><img src="https://img.shields.io/badge/Language-Go-blue.svg"></a>
-<a href="https://pkg.go.dev/github.com/openimsdk/open-im-server/v3"><img src="https://pkg.go.dev/badge/github.com/openimsdk/open-im-server/v3.svg" alt="Go Reference"></a>
-</p>
+[**English**](./README.md) •
+[**简体中文**](./README-zh_CN.md) •
+[**Docs**](https://openim.io/en)
+
+</div>
 
 </p>
 
-<p align="center">
-    <a href="./README.md"><b> English </b></a> •
-    <a href="./README-zh_CN.md"><b> 简体中文 </b></a> •
-<a href="https://openim.io/en"><b> Docs </b></a>
-</p>
-
-</p>
 
 ## Ⓜ️ About OpenIM
 
@@ -61,7 +58,7 @@ It's crafted in Golang and supports cross-platform deployment, ensuring a cohere
 + **REST API**: OpenIMServer provides REST API for business systems, aiming to empower your operations with additional functionalities like group creation and message push via backend interfaces.
 + **Callbacks**: To expand its utility across varied business forms, OpenIMServer offers callback capabilities. That is, it sends a request to the business server before or after an event occurs, such as sending a message, enriching the interaction and data exchange flow in the communication processes.
 
-👉 **[Learn More](https://doc.rentsoft.cn/guides/introduction/product)**
+👉 **[Learn More](https://docs.openim.io/guides/introduction/product)**
 
 <!--
 
@@ -118,7 +115,7 @@ It is recommended to use Docker Compose for deployment, which can easily and qui
 
 > **Note**
 >
-> If you don't know OpenIM's versioning policy, 📚Read our release policy: https://github.com/openimsdk/open-im-server/blob/main/docs/conversions/version.md
+> If you don't know OpenIM's versioning policy, 📚Read our release policy: https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/version.md
 
 
 </details> 
@@ -133,7 +130,7 @@ Ur need `Go 1.20` or higher version, and `make`.
 go version && make --version || echo "Error: One of the commands failed."
 ```
 
-Version Details: https://github.com/openimsdk/open-im-server/blob/main/docs/conversions/version.md
+Version Details: https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/version.md
 
 You can get the version number from the command below or from [github releases](https://github.com/openimsdk/open-im-server/tags).
 
@@ -141,7 +138,7 @@ You can get the version number from the command below or from [github releases](
 $ curl --silent "https://api.github.com/repos/openimsdk/open-im-server/releases" | jq -r '.[].tag_name'
 ```
 
-We have our own version management policy, if you are interested in our version management, I recommend reading [📚 OpenIM Version](https://github.com/openimsdk/open-im-server/blob/main/docs/conversions/version.md), We recommend using stable versions such as `v3.3.0` and `v3.2.0` whenever possible. `v3.1.1-alpha.3` as well as `v3.3.0-beta.0` and `v3.2.0-rc.0` are pre-release or beta versions and are not recommended.
+We have our own version management policy, if you are interested in our version management, I recommend reading [📚 OpenIM Version](https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/version.md), We recommend using stable versions such as `v3.3.0` and `v3.2.0` whenever possible. `v3.1.1-alpha.3` as well as `v3.3.0-beta.0` and `v3.2.0-rc.0` are pre-release or beta versions and are not recommended.
 
 Set `OPENIM_VERSION` environment variables for the latest `OPENIM_VERSION` number, or replace the `OPENIM_VERSION` for you to install the OpenIM-Server `OPENIM_VERSION`:
 
@@ -179,8 +176,9 @@ Read: Configuration center document：https://github.com/openimsdk/open-im-serve
 </details> 
 -->
 
-+ **[Source Code Deployment Guide](https://doc.rentsoft.cn/guides/gettingStarted/imSourceCodeDeployment)**
-+ **[Docker Deployment Guide](https://doc.rentsoft.cn/guides/gettingStarted/dockerCompose)**
++ **[Source Code Deployment Guide](https://docs.openim.io/guides/gettingStarted/imSourceCodeDeployment)**
++ **[Production deployment of Linux systems](https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/install-openim-linux-system.md)**
++ **[Docker Deployment Guide](https://docs.openim.io/guides/gettingStarted/dockerCompose)**
 + **[Kubernetes Deployment Guide](https://github.com/openimsdk/open-im-server/tree/main/deployments)**
 
 <!-- 
@@ -198,22 +196,42 @@ Delve into the heart of Open-IM-Server's functionality with our architecture dia
 
 ## :hammer_and_wrench: To start developing OpenIM
 
+[![Open in Dev Container](https://img.shields.io/static/v1?label=Dev%20Container&message=Open&color=blue&logo=visualstudiocode)](https://vscode.dev/github/openimsdk/open-im-server)
+
 OpenIM Our goal is to build a top-level open source community. We have a set of standards, in the [Community repository](https://github.com/OpenIMSDK/community).
 
 If you'd like to contribute to this Open-IM-Server repository, please read our [contributor documentation](https://github.com/openimsdk/open-im-server/blob/main/CONTRIBUTING.md).
 
 Before you start, please make sure your changes are in demand. The best for that is to create a [new discussion](https://github.com/openimsdk/open-im-server/discussions/new/choose) OR [Slack Communication](https://join.slack.com/t/openimsdk/shared_invite/zt-22720d66b-o_FvKxMTGXtcnnnHiMqe9Q), or if you find an issue, [report it](https://github.com/openimsdk/open-im-server/issues/new/choose) first.
 
-- [Code Standards](https://github.com/openimsdk/open-im-server/blob/main/docs/conversions/go_code.md)
-- [Docker Images Standards](https://github.com/openimsdk/open-im-server/blob/main/docs/conversions/images.md)
-- [Directory Standards](https://github.com/openimsdk/open-im-server/blob/main/docs/conversions/directory.md)
-- [Commit Standards](https://github.com/openimsdk/open-im-server/blob/main/docs/conversions/commit.md)
-- [Versioning Standards](https://github.com/openimsdk/open-im-server/blob/main/docs/conversions/version.md)
-- [Interface Standards](https://github.com/openimsdk/open-im-server/blob/main/docs/conversions/api.md)
-- [Log Standards](https://github.com/openimsdk/open-im-server/blob/main/docs/conversions/logging.md)
-- [Error Code Standards](https://github.com/openimsdk/open-im-server/blob/main/docs/conversions/error_code.md)
-- [OpenIM configuration and environment variable Settings](https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/environment.md)
-
+- [OpenIM API Reference](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/api.md)
+- [OpenIM Bash Logging](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/bash-log.md)
+- [OpenIM CI/CD Actions](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/cicd-actions.md)
+- [OpenIM Code Conventions](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/code-conventions.md)
+- [OpenIM Commit Guidelines](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/commit.md)
+- [OpenIM Development Guide](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/development.md)
+- [OpenIM Directory Structure](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/directory.md)
+- [OpenIM Environment Setup](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/environment.md)
+- [OpenIM Error Code Reference](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/error-code.md)
+- [OpenIM Git Workflow](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/git-workflow.md)
+- [OpenIM Git Cherry Pick Guide](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/gitcherry-pick.md)
+- [OpenIM GitHub Workflow](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/github-workflow.md)
+- [OpenIM Go Code Standards](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/go-code.md)
+- [OpenIM Image Guidelines](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/images.md)
+- [OpenIM Initial Configuration](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/init-config.md)
+- [OpenIM Docker Installation Guide](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/install-docker.md)
+- [OpenIM OpenIM Linux System Installation](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/install-openim-linux-system.md)
+- [OpenIM Linux Development Guide](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/linux-development.md)
+- [OpenIM Local Actions Guide](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/local-actions.md)
+- [OpenIM Logging Conventions](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/logging.md)
+- [OpenIM Offline Deployment](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/offline-deployment.md)
+- [OpenIM Protoc Tools](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/protoc-tools.md)
+- [OpenIM Testing Guide](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/test.md)
+- [OpenIM Utility Go](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/util-go.md)
+- [OpenIM Makefile Utilities](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/util-makefile.md)
+- [OpenIM Script Utilities](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/util-scripts.md)
+- [OpenIM Versioning](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/version.md)
+- [Manage backend and monitor deployment](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/prometheus-grafana.md)
 
 ## :busts_in_silhouette: Community
 

build/goreleaser.yaml

@@ -255,131 +255,6 @@ builds:
       - "6"
       - "7"
 
-  - binary: infra
-    id: infra
-    main: ./tools/infra/infra.go
-    goos:
-      - darwin
-      - windows
-      - linux
-    goarch:
-      - s390x
-      - mips64
-      - mips64le
-      - amd64
-      - ppc64le
-      - arm64
-    goarm:
-      - "6"
-      - "7"
-
-  - binary: ncpu
-    id: ncpu
-    main: ./tools/ncpu/ncpu.go
-    goos:
-      - darwin
-      - windows
-      - linux
-    goarch:
-      - s390x
-      - mips64
-      - mips64le
-      - amd64
-      - ppc64le
-      - arm64
-    goarm:
-      - "6"
-      - "7"
-
-  - binary: openim-web
-    id: openim-web
-    main: ./tools/openim-web/openim-web.go
-    goos:
-      - darwin
-      - windows
-      - linux
-    goarch:
-      - s390x
-      - mips64
-      - mips64le
-      - amd64
-      - ppc64le
-      - arm64
-    goarm:
-      - "6"
-      - "7"
-
-  - binary: component
-    id: component
-    main: ./tools/component/component.go
-    goos:
-      - darwin
-      - windows
-      - linux
-    goarch:
-      - s390x
-      - mips64
-      - mips64le
-      - amd64
-      - ppc64le
-      - arm64
-    goarm:
-      - "6"
-      - "7"
-    
-  - binary: versionchecker
-    id: versionchecker
-    main: ./tools/versionchecker/versionchecker.go
-    goos:
-      - darwin
-      - windows
-      - linux
-    goarch:
-      - s390x
-      - mips64
-      - mips64le
-      - amd64
-      - ppc64le
-      - arm64
-    goarm:
-      - "6"
-      - "7"
-
-  - binary: changelog
-    id: changelog
-    main: ./tools/changelog/changelog.go
-    goos:
-      - darwin
-      - windows
-      - linux
-    goarch:
-      - s390x
-      - mips64
-      - mips64le
-      - amd64
-      - ppc64le
-      - arm64
-    goarm:
-      - "6"
-      - "7"
-
-  - binary: yamlfmt
-    id: yamlfmt
-    main: ./tools/yamlfmt/yamlfmt.go
-    goos:
-      - darwin
-      - windows
-      - linux
-    goarch:
-      - s390x
-      - mips64
-      - mips64le
-      - amd64
-      - ppc64le
-      - arm64
-    goarm:
-      - "6"
-      - "7"
 
 # TODO：Need a script, such as the init - release to help binary to find the right directory
 # ,which can be compiled binary

build/images/Dockerfile

@@ -1,3 +1,17 @@
+# Copyright © 2023 OpenIM. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
 FROM BASE_IMAGE
 
 WORKDIR ${SERVER_WORKDIR}

cmd/openim-api/main.go

@@ -18,21 +18,27 @@ import (
 	"context"
 	"fmt"
 	"net"
+	"net/http"
 	_ "net/http/pprof"
+	"os"
+	"os/signal"
 	"strconv"
-
-	"github.com/openimsdk/open-im-server/v3/pkg/common/discovery_register"
+	"syscall"
+	"time"
 
 	"github.com/OpenIMSDK/protocol/constant"
 	"github.com/OpenIMSDK/tools/discoveryregistry"
 	"github.com/OpenIMSDK/tools/log"
+
 	"github.com/openimsdk/open-im-server/v3/internal/api"
 	"github.com/openimsdk/open-im-server/v3/pkg/common/cmd"
 	"github.com/openimsdk/open-im-server/v3/pkg/common/config"
 	"github.com/openimsdk/open-im-server/v3/pkg/common/db/cache"
+	kdisc "github.com/openimsdk/open-im-server/v3/pkg/common/discoveryregister"
+	ginProm "github.com/openimsdk/open-im-server/v3/pkg/common/ginprometheus"
+	"github.com/openimsdk/open-im-server/v3/pkg/common/prommetrics"
 )
 
-
 func main() {
 	apiCmd := cmd.NewApiCmd()
 	apiCmd.AddPortFlag()
@@ -43,19 +49,18 @@ func main() {
 	}
 }
 
-func run(port int) error {
-	log.ZInfo(context.Background(), "Openim api port:", "port", port)
+func run(port int, proPort int) error {
+	log.ZInfo(context.Background(), "Openim api port:", "port", port, "proPort", proPort)
 
-	if port == 0 {
-		err := "port is empty"
+	if port == 0 || proPort == 0 {
+		err := "port or proPort is empty:" + strconv.Itoa(port) + "," + strconv.Itoa(proPort)
 		log.ZError(context.Background(), err, nil)
-
 		return fmt.Errorf(err)
 	}
+
 	rdb, err := cache.NewRedis()
 	if err != nil {
 		log.ZError(context.Background(), "Failed to initialize Redis", err)
-
 		return err
 	}
 	log.ZInfo(context.Background(), "api start init discov client")
@@ -63,26 +68,32 @@ func run(port int) error {
 	var client discoveryregistry.SvcDiscoveryRegistry
 
 	// Determine whether zk is passed according to whether it is a clustered deployment
-	client, err = discovery_register.NewDiscoveryRegister(config.Config.Envs.Discovery)
+	client, err = kdisc.NewDiscoveryRegister(config.Config.Envs.Discovery)
 	if err != nil {
 		log.ZError(context.Background(), "Failed to initialize discovery register", err)
-
 		return err
 	}
+
 	if err = client.CreateRpcRootNodes(config.Config.GetServiceNames()); err != nil {
 		log.ZError(context.Background(), "Failed to create RPC root nodes", err)
-
 		return err
 	}
+
 	log.ZInfo(context.Background(), "api register public config to discov")
 	if err = client.RegisterConf2Registry(constant.OpenIMCommonConfigKey, config.Config.EncodeConfig()); err != nil {
 		log.ZError(context.Background(), "Failed to register public config to discov", err)
-
 		return err
 	}
+
 	log.ZInfo(context.Background(), "api register public config to discov success")
 	router := api.NewGinRouter(client, rdb)
+	if config.Config.Prometheus.Enable {
+		p := ginProm.NewPrometheus("app", prommetrics.GetGinCusMetrics("Api"))
+		p.SetListenAddress(fmt.Sprintf(":%d", proPort))
+		p.Use(router)
+	}
 	log.ZInfo(context.Background(), "api init router success")
+
 	var address string
 	if config.Config.Api.ListenIP != "" {
 		address = net.JoinHostPort(config.Config.Api.ListenIP, strconv.Itoa(port))
@@ -91,10 +102,25 @@ func run(port int) error {
 	}
 	log.ZInfo(context.Background(), "start api server", "address", address, "OpenIM version", config.Version)
 
-	err = router.Run(address)
-	if err != nil {
-		log.ZError(context.Background(), "api run failed", err, "address", address)
+	server := http.Server{Addr: address, Handler: router}
+	go func() {
+		err = server.ListenAndServe()
+		if err != nil && err != http.ErrServerClosed {
+			log.ZError(context.Background(), "api run failed", err, "address", address)
+			os.Exit(1)
+		}
+	}()
 
+	sigs := make(chan os.Signal, 1)
+	signal.Notify(sigs, syscall.SIGINT, syscall.SIGTERM, syscall.SIGQUIT)
+	<-sigs
+
+	ctx, cancel := context.WithTimeout(context.Background(), 15*time.Second)
+	defer cancel()
+
+	// graceful shutdown operation.
+	if err := server.Shutdown(ctx); err != nil {
+		log.ZError(context.Background(), "failed to api-server shutdown", err)
 		return err
 	}
 

cmd/openim-msggateway/main.go

@@ -23,6 +23,7 @@ func main() {
 	msgGatewayCmd.AddWsPortFlag()
 	msgGatewayCmd.AddPortFlag()
 	msgGatewayCmd.AddPrometheusPortFlag()
+
 	if err := msgGatewayCmd.Exec(); err != nil {
 		panic(err.Error())
 	}

cmd/openim-msgtransfer/main.go

@@ -21,6 +21,7 @@ import (
 func main() {
 	msgTransferCmd := cmd.NewMsgTransferCmd()
 	msgTransferCmd.AddPrometheusPortFlag()
+	msgTransferCmd.AddTransferProgressFlag()
 	if err := msgTransferCmd.Exec(); err != nil {
 		panic(err.Error())
 	}

config/email.tmpl

@@ -0,0 +1,16 @@
+{{ define "email.to.html" }}
+{{ range .Alerts }}
+<!-- Begin of OpenIM Alert -->
+<div style="border:1px solid #ccc; padding:10px; margin-bottom:10px;">
+    <h3>OpenIM Alert</h3>
+    <p><strong>Alert Program:</strong> Prometheus Alert</p>
+    <p><strong>Severity Level:</strong> {{ .Labels.severity }}</p>
+    <p><strong>Alert Type:</strong> {{ .Labels.alertname }}</p>
+    <p><strong>Affected Host:</strong> {{ .Labels.instance }}</p>
+    <p><strong>Affected Service:</strong> {{ .Labels.job }}</p>
+    <p><strong>Alert Subject:</strong> {{ .Annotations.summary }}</p>
+    <p><strong>Trigger Time:</strong> {{ .StartsAt.Format "2006-01-02 15:04:05" }}</p>
+</div>
+<!-- End of OpenIM Alert -->
+{{ end }}
+{{ end }}

config/instance-down-rules.yml

@@ -0,0 +1,22 @@
+groups:
+  - name: instance_down
+    rules:
+      - alert: InstanceDown
+        expr: up == 0
+        for: 1m
+        labels:
+          severity: critical
+        annotations:
+          summary: "Instance {{ $labels.instance }} down"
+          description: "{{ $labels.instance }} of job {{ $labels.job }} has been down for more than 1 minutes."
+
+  - name: database_insert_failure_alerts
+    rules:
+      - alert: DatabaseInsertFailed
+        expr: (increase(msg_insert_redis_failed_total[5m]) > 0) or (increase(msg_insert_mongo_failed_total[5m]) > 0)
+        for: 1m
+        labels:
+          severity: critical
+        annotations:
+          summary: "Increase in MsgInsertRedisFailedCounter or MsgInsertMongoFailedCounter detected"
+          description: "Either MsgInsertRedisFailedCounter or MsgInsertMongoFailedCounter has increased in the last 5 minutes, indicating failures in message insert operations to Redis or MongoDB,maybe the redis or mongodb is crash."

config/templates/README.md

@@ -0,0 +1,36 @@
+# Examples Directory
+
+Welcome to the `examples` directory of our project! This directory contains a collection of example files that demonstrate various configurations and setups for our software. These examples are designed to provide you with templates that can be used as a starting point for your own configurations.
+
+## Overview
+
+In this directory, you'll find examples for a variety of use cases. Each file is a template with default values and configurations that illustrate best practices and typical scenarios. Whether you're just getting started or looking to implement a complex setup, these examples should help you get on the right track.
+
+## Structure
+
+Here's a quick overview of what you'll find in this directory:
+
++ `env-example.yaml`: Demonstrates how to set up environment variables.
++ `openim-example.yaml`: A sample configuration file for the OpenIM application.
++ `prometheus-example.yml`: An example Prometheus configuration for monitoring.
++ `alertmanager-example.yml`: A template for setting up Alertmanager configurations.
+
+## How to Use These Examples
+
+To use these examples, simply copy the relevant file to your working directory and rename it as needed (e.g., removing the `-example` suffix). Then, modify the file according to your requirements.
+
+### Tips for Using Example Files:
+
+1. **Read the Comments**: Each file contains comments that explain various sections and settings. Make sure to read these comments for a better understanding of how to customize the file.
+2. **Check for Required Changes**: Some examples might require mandatory changes (like setting specific environment variables) before they can be used effectively.
+3. **Version Compatibility**: Ensure that the example files are compatible with the version of the software you are using.
+
+## Contributing
+
+If you have a configuration that you believe would be beneficial to others, please feel free to contribute by opening a pull request with your proposed changes. We appreciate contributions that expand our examples with new scenarios and use cases.
+
+## Support
+
+If you encounter any issues or have questions regarding the example files, please open an issue on our repository. Our community is here to help you navigate through any challenges you might face.
+
+Thank you for exploring our examples, and we hope they will be helpful in setting up and configuring your environment!

config/templates/alertmanager.yml.template

@@ -0,0 +1,33 @@
+###################### AlertManager Configuration ######################
+# AlertManager configuration using environment variables
+#
+# Resolve timeout
+# SMTP configuration for sending alerts
+# Templates for email notifications
+# Routing configurations for alerts
+# Receiver configurations
+global:
+  resolve_timeout: 5m
+  smtp_from: alert@openim.io
+  smtp_smarthost: smtp.163.com:465
+  smtp_auth_username: alert@openim.io
+  smtp_auth_password: YOURAUTHPASSWORD
+  smtp_require_tls: false
+  smtp_hello: xxx监控告警
+
+templates:
+  - /etc/alertmanager/email.tmpl
+
+route:
+  group_by: ['alertname']
+  group_wait: 5s
+  group_interval: 5s
+  repeat_interval: 5m
+  receiver: email
+receivers:
+  - name: email
+    email_configs:
+      - to: 'alert@example.com'
+        html: '{{ template "email.to.html" . }}'
+        headers: { Subject: "[OPENIM-SERVER]Alarm" }
+        send_resolved: true

config/templates/config.yaml.template

@@ -35,26 +35,6 @@ zookeeper:
   username: ''
   password: ''
 
-###################### Mysql ######################
-# MySQL configuration
-# Currently, only single machine setup is supported
-#
-# Maximum number of open connections
-# Maximum number of idle connections
-# Maximum lifetime in seconds a connection can be reused
-# Log level: 1=slient, 2=error, 3=warn, 4=info
-# Slow query threshold in milliseconds
-mysql:
-  address: [ 172.28.0.1:13306 ]
-  username: root
-  password: openIM123
-  database: openIM_v3
-  maxOpenConn: 1000
-  maxIdleConn: 100
-  maxLifeTime: 60
-  logLevel: 4
-  slowThreshold: 500
-
 ###################### Mongo ######################
 # MongoDB configuration
 # If uri is not empty, it will be used directly
@@ -135,14 +115,14 @@ api:
 # minio.signEndpoint is minio public network address
 object:
   enable: "minio"
-  apiURL: "http://14.155.86.214:10002"
+  apiURL: "http://172.28.0.1:10002"
   minio:
     bucket: "openim"
     endpoint: "http://172.28.0.1:10005"
     accessKeyID: "root"
     secretAccessKey: "openIM123"
     sessionToken: ''
-    signEndpoint: "http://14.155.86.214:10005"
+    signEndpoint: "http://172.28.0.1:10005"
     publicRead: false
   cos:
     bucketURL: https://temp-1252357374.cos.ap-chengdu.myqcloud.com
@@ -158,13 +138,21 @@ object:
     accessKeySecret: ''
     sessionToken: ''
     publicRead: false
+  kodo:
+    endpoint: "http://s3.cn-east-1.qiniucs.com"
+    bucket: "demo-9999999"
+    bucketURL: "http://your.domain.com"
+    accessKeyID: ''
+    accessKeySecret: ''
+    sessionToken: ''
+    publicRead: false
 
 ###################### RPC Port Configuration ######################
 # RPC service ports
 # These ports are passed into the program by the script and are not recommended to modify
 # For launching multiple programs, just fill in multiple ports separated by commas
 # For example, [10110, 10111]
-rpcPort: 
+rpcPort:
   openImUserPort: [ 10110 ]
   openImFriendPort: [ 10120 ]
   openImMessagePort: [ 10130 ]
@@ -198,7 +186,7 @@ rpcRegisterName:
 # Whether to output in json format
 # Whether to include stack trace in logs
 log:
-  storageLocation: /root/workspaces/openim/Open-IM-Server/logs/
+  storageLocation: ../logs/
   rotationTime: 24
   remainRotationCount: 2
   remainLogLevel: 6
@@ -312,7 +300,7 @@ iosPush:
 # Timeout in seconds
 # Whether to continue execution if callback fails
 callback:
-  url:
+  url: ""
   beforeSendSingleMsg:
     enable: false
     timeout: 5
@@ -320,6 +308,7 @@ callback:
   afterSendSingleMsg:
     enable: false
     timeout: 5
+    failedContinue: true
   beforeSendGroupMsg:
     enable: false
     timeout: 5
@@ -327,6 +316,7 @@ callback:
   afterSendGroupMsg:
     enable: false
     timeout: 5
+    failedContinue: true
   msgModify:
     enable: false
     timeout: 5
@@ -334,12 +324,15 @@ callback:
   userOnline:
     enable: false
     timeout: 5
+    failedContinue: true
   userOffline:
     enable: false
     timeout: 5
+    failedContinue: true
   userKickOff:
     enable: false
     timeout: 5
+    failedContinue: true
   offlinePush:
     enable: false
     timeout: 5
@@ -364,6 +357,10 @@ callback:
     enable: false
     timeout: 5
     failedContinue: true
+  afterCreateGroup:
+    enable: false
+    timeout: 5
+    failedContinue: true
   beforeMemberJoinGroup:
     enable: false
     timeout: 5
@@ -372,17 +369,130 @@ callback:
     enable: false
     timeout: 5
     failedContinue: true
+  afterSetGroupMemberInfo:
+    enable: false
+    timeout: 5
+    failedContinue: true
   setMessageReactionExtensions:
     enable: false
     timeout: 5
     failedContinue: true
-
+  quitGroup:
+    enable: false
+    timeout: 5
+    failedContinue: true
+  killGroupMember:
+    enable: false
+    timeout: 5
+    failedContinue: true
+  dismissGroup:
+    enable: false
+    timeout: 5
+    failedContinue: true
+  joinGroup:
+    enable: false
+    timeout: 5
+    failedContinue: true
+  groupMsgRead:
+    enable: false
+    timeout: 5
+    failedContinue: true
+  singleMsgRead:
+    enable: false
+    timeout: 5
+    failedContinue: true
+  updateUserInfo:
+    enable: false
+    timeout: 5
+    failedContinue: true
+  beforeUserRegister:
+    enable: false
+    timeout: 5
+    failedContinue: true
+  afterUserRegister:
+    enable: false
+    timeout: 5
+    failedContinue: true
+  transferGroupOwner:
+    enable: false
+    timeout: 5
+    failedContinue: true
+  beforeSetFriendRemark:
+    enable: false
+    timeout: 5
+    failedContinue: true
+  afterSetFriendRemark:
+    enable: false
+    timeout: 5
+    failedContinue: true
+  afterGroupMsgRead:
+    enable: false
+    timeout: 5
+    failedContinue: true
+  afterGroupMsgRevoke:
+    enable: false
+    timeout: 5
+    failedContinue: true
+  afterJoinGroup:
+    enable: false
+    timeout: 5
+    failedContinue: true
+  beforeInviteUserToGroup:
+    enable: false
+    timeout: 5
+    failedContinue: true
+  joinGroupAfter:
+    enable: false
+    timeout: 5
+    failedContinue: true
+  setGroupInfoAfter:
+    enable: false
+    timeout: 5
+    failedContinue: true
+  setGroupInfoBefore:
+    enable: false
+    timeout: 5
+    failedContinue: true
+  revokeMsgAfter:
+    enable: false
+    timeout: 5
+    failedContinue: true
+  addBlackBefore:
+    enable: false
+    timeout: 5
+    failedContinue: true
+  addFriendAfter:
+    enable: false
+    timeout: 5
+    failedContinue: true
+  addFriendAgreeBefore:
+    enable: false
+    timeout: 5
+    failedContinue: true
+  deleteFriendAfter:
+    enable: false
+    timeout: 5
+    failedContinue: true
+  importFriendsBefore:
+    enable: false
+    timeout: 5
+    failedContinue: true
+  importFriendsAfter:
+    enable: false
+    timeout: 5
+    failedContinue: true
+  removeBlackAfter:
+    enable: false
+    timeout: 5
+    failedContinue: true
 ###################### Prometheus ######################
 # Prometheus configuration for various services
 # The number of Prometheus ports per service needs to correspond to rpcPort
 # The number of ports needs to be consistent with msg_transfer_service_num in script/path_info.sh
 prometheus:
   enable: false
+  prometheusUrl: 172.28.0.1:13000
+  apiPrometheusPort: [20100]
   userPrometheusPort: [ 20110 ]
   friendPrometheusPort: [ 20120 ]
   messagePrometheusPort: [ 20130 ]

config/templates/env.template

@@ -1,23 +1,9 @@
-# Copyright © 2023 OpenIM. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
 # ======================================
 # ========= Basic Configuration ========
 # ======================================
 
 # The user for authentication or system operations.
-# Default: USER=root
+# Default: OPENIM_USER=root
 USER=root
 
 # Password associated with the specified user for authentication.
@@ -30,11 +16,11 @@ MINIO_ENDPOINT=http://172.28.0.1:10005
 
 # Base URL for the application programming interface (API).
 # Default: API_URL=http://172.28.0.1:10002
-API_URL=http://14.155.86.214:10002
+API_URL=http://172.28.0.1:10002
 
 # Directory path for storing data files or related information.
 # Default: DATA_DIR=./
-DATA_DIR=/root/workspaces/openim/Open-IM-Server
+DATA_DIR=./
 
 # Choose the appropriate image address, the default is GITHUB image, 
 # you can choose docker hub, for Chinese users can choose Ali Cloud
@@ -55,50 +41,19 @@ DOCKER_BRIDGE_SUBNET=172.28.0.0/16
 # Default: DOCKER_BRIDGE_GATEWAY=172.28.0.1
 DOCKER_BRIDGE_GATEWAY=172.28.0.1
 
-# Address or hostname for the MySQL network.
-# Default: MYSQL_NETWORK_ADDRESS=172.28.0.2
-MYSQL_NETWORK_ADDRESS=172.28.0.2
-
-# Address or hostname for the MongoDB network.
-# Default: MONGO_NETWORK_ADDRESS=172.28.0.3
-MONGO_NETWORK_ADDRESS=172.28.0.3
-
-# Address or hostname for the Redis network.
-# Default: REDIS_NETWORK_ADDRESS=172.28.0.4
-REDIS_NETWORK_ADDRESS=172.28.0.4
-
-# Address or hostname for the Kafka network.
-# Default: KAFKA_NETWORK_ADDRESS=172.28.0.5
-KAFKA_NETWORK_ADDRESS=172.28.0.5
-
-# Address or hostname for the ZooKeeper network.
-# Default: ZOOKEEPER_NETWORK_ADDRESS=172.28.0.6
-ZOOKEEPER_NETWORK_ADDRESS=172.28.0.6
-
-# Address or hostname for the MinIO network.
-# Default: MINIO_NETWORK_ADDRESS=172.28.0.7
-MINIO_NETWORK_ADDRESS=172.28.0.7
-
-# Address or hostname for the OpenIM web network.
-# Default: OPENIM_WEB_NETWORK_ADDRESS=172.28.0.8
-OPENIM_WEB_NETWORK_ADDRESS=172.28.0.8
-
-# Address or hostname for the OpenIM server network.
-# Default: OPENIM_SERVER_NETWORK_ADDRESS=172.28.0.9
-OPENIM_SERVER_NETWORK_ADDRESS=172.28.0.9
-
-# Address or hostname for the OpenIM chat network.
-# Default: OPENIM_CHAT_NETWORK_ADDRESS=172.28.0.10
-OPENIM_CHAT_NETWORK_ADDRESS=172.28.0.10
-
-# Address or hostname for the Prometheus network.
-# Default: PROMETHEUS_NETWORK_ADDRESS=172.28.0.11
-PROMETHEUS_NETWORK_ADDRESS=172.28.0.11
-
-# Address or hostname for the Grafana network.
-# Default: GRAFANA_NETWORK_ADDRESS=172.28.0.12
-GRAFANA_NETWORK_ADDRESS=172.28.0.12
-
+MONGO_NETWORK_ADDRESS=172.28.0.2
+REDIS_NETWORK_ADDRESS=172.28.0.3
+KAFKA_NETWORK_ADDRESS=172.28.0.4
+ZOOKEEPER_NETWORK_ADDRESS=172.28.0.5
+MINIO_NETWORK_ADDRESS=172.28.0.6
+OPENIM_WEB_NETWORK_ADDRESS=172.28.0.7
+OPENIM_SERVER_NETWORK_ADDRESS=172.28.0.8
+OPENIM_CHAT_NETWORK_ADDRESS=172.28.0.9
+PROMETHEUS_NETWORK_ADDRESS=172.28.0.10
+GRAFANA_NETWORK_ADDRESS=172.28.0.11
+NODE_EXPORTER_NETWORK_ADDRESS=172.28.0.12
+OPENIM_ADMIN_FRONT_NETWORK_ADDRESS=172.28.0.13
+ALERT_MANAGER_NETWORK_ADDRESS=172.28.0.14
 
 # ===============================================
 # = Component Extension Configuration =
@@ -108,38 +63,24 @@ GRAFANA_NETWORK_ADDRESS=172.28.0.12
 # ----- ZooKeeper Configuration -----
 # Address or hostname for the ZooKeeper service.
 # Default: ZOOKEEPER_ADDRESS=172.28.0.1
-ZOOKEEPER_ADDRESS=172.28.0.6
+ZOOKEEPER_ADDRESS=172.28.0.5
 
 # Port for ZooKeeper service.
 # Default: ZOOKEEPER_PORT=12181
 ZOOKEEPER_PORT=12181
 
-# ----- MySQL Configuration -----
-
-# Address or hostname for the MySQL service.
-# Default: MYSQL_ADDRESS=172.28.0.1
-MYSQL_ADDRESS=172.28.0.2
-
-# Port on which MySQL database service is running.
-# Default: MYSQL_PORT=13306
-MYSQL_PORT=13306
-
-# Password to authenticate with the MySQL database service.
-# Default: MYSQL_PASSWORD=openIM123
-MYSQL_PASSWORD=openIM123
-
 # ----- MongoDB Configuration -----
 # Address or hostname for the MongoDB service.
 # Default: MONGO_ADDRESS=172.28.0.1
-MONGO_ADDRESS=172.28.0.3
+MONGO_ADDRESS=172.28.0.2
 
 # Port on which MongoDB service is running.
 # Default: MONGO_PORT=37017
-MONGO_PORT=37017
+# MONGO_PORT=37017
 
 # Username to authenticate with the MongoDB service.
 # Default: MONGO_USERNAME=root
-MONGO_USERNAME=root
+# MONGO_USERNAME=root
 
 # Password to authenticate with the MongoDB service.
 # Default: MONGO_PASSWORD=openIM123
@@ -152,7 +93,7 @@ MONGO_DATABASE=openIM_v3
 # ----- Redis Configuration -----
 # Address or hostname for the Redis service.
 # Default: REDIS_ADDRESS=172.28.0.1
-REDIS_ADDRESS=172.28.0.4
+REDIS_ADDRESS=172.28.0.3
 
 # Port on which Redis in-memory data structure store is running.
 # Default: REDIS_PORT=16379
@@ -165,7 +106,10 @@ REDIS_PASSWORD=openIM123
 # ----- Kafka Configuration -----
 # Address or hostname for the Kafka service.
 # Default: KAFKA_ADDRESS=172.28.0.1
-KAFKA_ADDRESS=172.28.0.5
+KAFKA_ADDRESS=172.28.0.4
+
+# Kakfa username to authenticate with the Kafka service.
+# KAFKA_USERNAME=''
 
 # Port on which Kafka distributed streaming platform is running.
 # Default: KAFKA_PORT=19092
@@ -186,7 +130,7 @@ KAFKA_OFFLINEMSG_MONGO_TOPIC=offlineMsgToMongoMysql
 # ----- MinIO Configuration ----
 # Address or hostname for the MinIO object storage service.
 # Default: MINIO_ADDRESS=172.28.0.1
-MINIO_ADDRESS=172.28.0.7
+MINIO_ADDRESS=172.28.0.6
 
 # Port on which MinIO object storage service is running.
 # Default: MINIO_PORT=10005
@@ -194,7 +138,7 @@ MINIO_PORT=10005
 
 # Access key to authenticate with the MinIO service.
 # Default: MINIO_ACCESS_KEY=root
-MINIO_ACCESS_KEY=root
+# MINIO_ACCESS_KEY=root
 
 # Secret key corresponding to the access key for MinIO authentication.
 # Default: MINIO_SECRET_KEY=openIM123
@@ -203,7 +147,7 @@ MINIO_SECRET_KEY=openIM123
 # ----- Prometheus Configuration -----
 # Address or hostname for the Prometheus service.
 # Default: PROMETHEUS_ADDRESS=172.28.0.1
-PROMETHEUS_ADDRESS=172.28.0.11
+PROMETHEUS_ADDRESS=172.28.0.10
 
 # Port on which Prometheus service is running.
 # Default: PROMETHEUS_PORT=19090
@@ -212,11 +156,11 @@ PROMETHEUS_PORT=19090
 # ----- Grafana Configuration -----
 # Address or hostname for the Grafana service.
 # Default: GRAFANA_ADDRESS=172.28.0.1
-GRAFANA_ADDRESS=172.28.0.12
+GRAFANA_ADDRESS=172.28.0.11
 
 # Port on which Grafana service is running.
-# Default: GRAFANA_PORT=3000
-GRAFANA_PORT=3000
+# Default: GRAFANA_PORT=13000
+GRAFANA_PORT=13000
 
 # ======================================
 # ============ OpenIM Web ===============
@@ -232,7 +176,7 @@ OPENIM_WEB_PORT=11001
 
 # Address or hostname for the OpenIM web service.
 # Default: OPENIM_WEB_ADDRESS=172.28.0.1
-OPENIM_WEB_ADDRESS=172.28.0.8
+OPENIM_WEB_ADDRESS=172.28.0.7
 
 # ======================================
 # ========= OpenIM Server ==============
@@ -240,7 +184,7 @@ OPENIM_WEB_ADDRESS=172.28.0.8
 
 # Address or hostname for the OpenIM server.
 # Default: OPENIM_SERVER_ADDRESS=172.28.0.1
-OPENIM_SERVER_ADDRESS=172.28.0.9
+OPENIM_SERVER_ADDRESS=172.28.0.8
 
 # Port for the OpenIM WebSockets.
 # Default: OPENIM_WS_PORT=10001
@@ -261,7 +205,7 @@ CHAT_BRANCH=main
 
 # Address or hostname for the OpenIM chat service.
 # Default: OPENIM_CHAT_ADDRESS=172.28.0.1
-OPENIM_CHAT_ADDRESS=172.28.0.10
+OPENIM_CHAT_ADDRESS=172.28.0.9
 
 # Port for the OpenIM chat API.
 # Default: OPENIM_CHAT_API_PORT=10008
@@ -283,3 +227,23 @@ SERVER_BRANCH=main
 # Port for the OpenIM admin API.
 # Default: OPENIM_ADMIN_API_PORT=10009
 OPENIM_ADMIN_API_PORT=10009
+  
+# Port for the node exporter.
+# Default: NODE_EXPORTER_PORT=19100
+NODE_EXPORTER_PORT=19100
+  
+# Port for the prometheus.
+# Default: PROMETHEUS_PORT=19090
+PROMETHEUS_PORT=19090
+  
+# Port for the grafana.
+# Default: GRAFANA_PORT=13000
+GRAFANA_PORT=13000
+  
+# Port for the admin front.
+# Default: OPENIM_ADMIN_FRONT_PORT=11002
+OPENIM_ADMIN_FRONT_PORT=11002
+
+# Port for the alertmanager.
+# Default: ALERT_MANAGER_PORT=19093
+ALERT_MANAGER_PORT=19093

config/templates/prometheus.yml.template

@@ -0,0 +1,85 @@
+# my global config
+global:
+  scrape_interval:     15s # Set the scrape interval to every 15 seconds. Default is every 1 minute.
+  evaluation_interval: 15s # Evaluate rules every 15 seconds. The default is every 1 minute.
+  # scrape_timeout is set to the global default (10s).
+
+# Alertmanager configuration
+alerting:
+  alertmanagers:
+    - static_configs:
+        - targets: ['172.28.0.1:19093']
+
+# Load rules once and periodically evaluate them according to the global 'evaluation_interval'.
+rule_files:
+  - "instance-down-rules.yml"
+# - "first_rules.yml"
+# - "second_rules.yml"
+
+# A scrape configuration containing exactly one endpoint to scrape:
+# Here it's Prometheus itself.
+scrape_configs:
+  # The job name is added as a label "job='job_name'"" to any timeseries scraped from this config.
+  # Monitored information captured by prometheus
+  - job_name: 'node-exporter'
+    static_configs:
+      - targets: [ '172.28.0.1:19100' ]
+        labels:
+          namespace: 'default'
+
+  # prometheus fetches application services
+  - job_name: 'openimserver-openim-api'
+    static_configs:
+      - targets: [ '172.28.0.1:20100' ]
+        labels:
+          namespace: 'default'
+  - job_name: 'openimserver-openim-msggateway'
+    static_configs:
+      - targets: [ '172.28.0.1:20140' ]
+        labels:
+          namespace: 'default'
+  - job_name: 'openimserver-openim-msgtransfer'
+    static_configs:
+      - targets: [ 172.28.0.1:21400, 172.28.0.1:21401, 172.28.0.1:21402, 172.28.0.1:21403 ]
+        labels:
+          namespace: 'default'
+  - job_name: 'openimserver-openim-push'
+    static_configs:
+      - targets: [ '172.28.0.1:20170' ]
+        labels:
+          namespace: 'default'
+  - job_name: 'openimserver-openim-rpc-auth'
+    static_configs:
+      - targets: [ '172.28.0.1:20160' ]
+        labels:
+          namespace: 'default'
+  - job_name: 'openimserver-openim-rpc-conversation'
+    static_configs:
+      - targets: [ '172.28.0.1:20230' ]
+        labels:
+          namespace: 'default'
+  - job_name: 'openimserver-openim-rpc-friend'
+    static_configs:
+      - targets: [ '172.28.0.1:20120' ]
+        labels:
+          namespace: 'default'
+  - job_name: 'openimserver-openim-rpc-group'
+    static_configs:
+      - targets: [ '172.28.0.1:20150' ]
+        labels:
+          namespace: 'default'
+  - job_name: 'openimserver-openim-rpc-msg'
+    static_configs:
+      - targets: [ '172.28.0.1:20130' ]
+        labels:
+          namespace: 'default'
+  - job_name: 'openimserver-openim-rpc-third'
+    static_configs:
+      - targets: [ '172.28.0.1:21301' ]
+        labels:
+          namespace: 'default'
+  - job_name: 'openimserver-openim-rpc-user'
+    static_configs:
+      - targets: [ '172.28.0.1:20110' ]
+        labels:
+          namespace: 'default'

deployments/README.md

@@ -81,6 +81,13 @@ $ sudo sealos run labring/kubernetes:v1.25.0 labring/helm:v3.8.2 labring/calico:
 > $ sealos reset
 > ```
 
+If you are local, you can also use Kind and Minikube to test, for example, using Kind:
+
+```bash
+$ GO111MODULE="on" go get sigs.k8s.io/kind@v0.11.1
+$ kind create cluster
+```
+
 ### Installing helm
 
 Helm simplifies the deployment and management of Kubernetes applications to a large extent by offering version control and release management through packaging.
@@ -99,7 +106,7 @@ $ helm repo add brigade https://openimsdk.github.io/openim-charts
 
 ### OpenIM Image Strategy
 
-Automated offerings include aliyun, ghcr, docker hub: [Image Documentation](https://github.com/openimsdk/open-im-server/blob/main/docs/conversions/images.md)
+Automated offerings include aliyun, ghcr, docker hub: [Image Documentation](https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/images.md)
 
 **Local Test Build Method:**
 
@@ -112,3 +119,57 @@ $ make image
 ## Installation
 
 Explore our Helm-Charts repository and read through: [Helm-Charts Repository](https://github.com/openimsdk/helm-charts)
+
+
+Using the helm charts repository, you can ignore the following configuration, but if you want to just use the server and scale on top of it, you can go ahead:
+
+**Use the Helm template to generate the deployment yaml file: `openim-charts.yaml`**
+
+**Gen Image:**
+
+```bash
+../scripts/genconfig.sh ../scripts/install/environment.sh ./templates/helm-image.yaml > ./charts/generated-configs/helm-image.yaml
+```
+
+**Gen Charts:**
+
+```bash
+for chart in ./charts/*/; do
+    if [[ "$chart" == *"generated-configs"* || "$chart" == *"helmfile.yaml"* ]]; then
+        continue
+    fi
+
+    if [ -f "${chart}values.yaml" ]; then
+        helm template "$chart" -f "./charts/generated-configs/helm-image.yaml" -f "./charts/generated-configs/config.yaml" -f "./charts/generated-configs/notification.yaml" >> openim-charts.yaml
+    else
+        helm template "$chart" >> openim-charts.yaml
+    fi
+done
+```
+
+**Use Helmfile:**
+
+```bash
+GO111MODULE=on go get github.com/roboll/helmfile@latest
+```
+
+```bash
+export MONGO_ADDRESS=im-mongo
+export MONGO_PORT=27017
+export REDIS_ADDRESS=im-redis-master
+export REDIS_PORT=6379
+export KAFKA_ADDRESS=im-kafka
+export KAFKA_PORT=9092
+export OBJECT_APIURL="https://openim.server.com/api"
+export MINIO_ENDPOINT="http://im-minio:9000"
+export MINIO_SIGN_ENDPOINT="https://openim.server.com/im-minio-api"
+
+mkdir ./charts/generated-configs
+../scripts/genconfig.sh ../scripts/install/environment.sh ./templates/openim.yaml > ./charts/generated-configs/config.yaml
+cp ../config/notification.yaml ./charts/generated-configs/notification.yaml
+../scripts/genconfig.sh ../scripts/install/environment.sh ./templates/helm-image.yaml > ./charts/generated-configs/helm-image.yaml
+```
+
+```bash
+helmfile apply
+```

deployments/charts/Chart.yaml

@@ -1,74 +0,0 @@
-# Copyright © 2023 OpenIM. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-apiVersion: v2
-name: openim-api
-description: A Helm chart for Kubernetes
-
-# A chart can be either an 'application' or a 'library' chart.
-#
-# Application charts are a collection of templates that can be packaged into versioned archives
-# to be deployed.
-#
-# Library charts provide useful utilities or functions for the chart developer. They're included as
-# a dependency of application charts to inject those utilities and functions into the rendering
-# pipeline. Library charts do not define any templates and therefore cannot be deployed.
-type: application
-
-# This is the chart version. This version number should be incremented each time you make changes
-# to the chart and its templates, including the app version.
-# Versions are expected to follow Semantic Versioning (https://semver.org/)
-version: 0.1.0
-
-# This is the version number of the application being deployed. This version number should be
-# incremented each time you make changes to the application. Versions are not expected to
-# follow Semantic Versioning. They should reflect the version the application is using.
-# It is recommended to use it with quotes.
-appVersion: "1.16.0"
-
-icon: https://raw.githubusercontent.com/openimsdk/open-im-server/main/assets/openim-logo-gradient.svg
-
-maintainers:
-  - name: "OpenIM"
-    url: "https://github.com/openimsdk"
-
-keywords:
-  - openim
-  - im
-  - chat
-
-sources:
-  - "https://github.com/openimsdk/open-im-server"
-  - "https://github.com/openimsdk/openim-sdk-core"
-  - "https://github.com/openimsdk/openim-docker"
-
-dependencies:
-  - name: mysql
-    version: 8.0.25
-    repository: https://charts.bitnami.com/bitnami
-  - name: redis
-    version: 14.6.1
-    repository: https://charts.bitnami.com/bitnami
-  - name: mongodb
-    version: 10.1.0
-    repository: https://charts.bitnami.com/bitnami
-  - name: kafka
-    version: 14.1.0
-    repository: https://charts.bitnami.com/bitnami
-  - name: minio
-    version: 8.1.2
-    repository: https://charts.bitnami.com/bitnami
-  - name: zookeeper
-    version: 5.17.0
-    repository: https://charts.bitnami.com/bitnami

deployments/charts/helmfile.yaml

@@ -0,0 +1,20 @@
+{{- define "defaultValues" -}}
+- ./generated-configs/helm-image.yaml
+- ./generated-configs/config.yaml
+- ./generated-configs/notification.yaml
+{{- end -}}
+
+{{- define "defaultRelease" -}}
+namespace: openim
+chart: ./{{ .name }}
+values:
+  - ./{{ .name }}/values.yaml
+  {{- template "defaultValues" . }}
+{{- end -}}
+
+releases:
+{{- $apps := list "openim-api" "openim-msggateway" "openim-msgtransfer" "openim-push" "openim-rpc-auth" "openim-rpc-conversation" "openim-rpc-friend" "openim-rpc-group" "openim-rpc-msg" "openim-rpc-third" "openim-rpc-user" }}
+{{- range $app := $apps }}
+  - name: {{ $app }}
+    {{- template "defaultRelease" dict "name" $app }}
+{{- end }}

deployments/charts/openim-api/Chart.yaml

@@ -22,3 +22,18 @@ version: 0.1.0
 # follow Semantic Versioning. They should reflect the version the application is using.
 # It is recommended to use it with quotes.
 appVersion: "1.16.0"
+
+icon: https://raw.githubusercontent.com/openimsdk/open-im-server/main/assets/openim-logo-gradient.svg
+
+maintainers:
+  - name: "OpenIM"
+    url: "https://github.com/openimsdk"
+
+keywords:
+  - openim
+  - im
+  - chat
+
+sources:
+  - "https://github.com/openimsdk/open-im-server"
+  - "https://github.com/openimsdk/helm-charts"

deployments/charts/openim-api/templates/deployment.yaml

@@ -48,10 +48,10 @@ spec:
           resources:
             {{- toYaml .Values.resources | nindent 12 }}
           volumeMounts:
-            - mountPath: /oepnim/openim-server/config/config.yaml
+            - mountPath: /openim/openim-server/config/config.yaml
               name: config
               subPath: config.yaml
-            - mountPath: /oepnim/openim-server/config/notification.yaml
+            - mountPath: /openim/openim-server/config/
               name: config
               subPath: notification.yaml
       volumes:

deployments/charts/openim-msggateway/Chart.yaml

@@ -22,3 +22,18 @@ version: 0.1.0
 # follow Semantic Versioning. They should reflect the version the application is using.
 # It is recommended to use it with quotes.
 appVersion: "1.16.0"
+
+icon: https://raw.githubusercontent.com/openimsdk/open-im-server/main/assets/openim-logo-gradient.svg
+
+maintainers:
+  - name: "OpenIM"
+    url: "https://github.com/openimsdk"
+
+keywords:
+  - openim
+  - im
+  - chat
+
+sources:
+  - "https://github.com/openimsdk/open-im-server"
+  - "https://github.com/openimsdk/helm-charts"

deployments/charts/openim-msggateway/templates/deployment.yaml

@@ -1,3 +1,17 @@
+# Copyright © 2023 OpenIM. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
 apiVersion: apps/v1
 kind: Deployment
 metadata:
@@ -51,10 +65,10 @@ spec:
           resources:
             {{- toYaml .Values.resources | nindent 12 }}
           volumeMounts:
-            - mountPath: /oepnim/openim-server/config/config.yaml
+            - mountPath: /openim/openim-server/config/config.yaml
               name: config
               subPath: config.yaml
-            - mountPath: /oepnim/openim-server/config/notification.yaml
+            - mountPath: /openim/openim-server/config/
               name: config
               subPath: notification.yaml
       volumes:

deployments/charts/openim-msgtransfer/Chart.yaml

@@ -22,3 +22,18 @@ version: 0.1.0
 # follow Semantic Versioning. They should reflect the version the application is using.
 # It is recommended to use it with quotes.
 appVersion: "1.16.0"
+
+icon: https://raw.githubusercontent.com/openimsdk/open-im-server/main/assets/openim-logo-gradient.svg
+
+maintainers:
+  - name: "OpenIM"
+    url: "https://github.com/openimsdk"
+
+keywords:
+  - openim
+  - im
+  - chat
+
+sources:
+  - "https://github.com/openimsdk/open-im-server"
+  - "https://github.com/openimsdk/helm-charts"

deployments/charts/openim-msgtransfer/templates/deployment.yaml

@@ -48,10 +48,10 @@ spec:
           resources:
             {{- toYaml .Values.resources | nindent 12 }}
           volumeMounts:
-            - mountPath: /oepnim/openim-server/config/config.yaml
+            - mountPath: /openim/openim-server/config/config.yaml
               name: config
               subPath: config.yaml
-            - mountPath: /oepnim/openim-server/config/notification.yaml
+            - mountPath: /openim/openim-server/config/
               name: config
               subPath: notification.yaml
       volumes:

deployments/charts/openim-push/Chart.yaml

@@ -22,3 +22,18 @@ version: 0.1.0
 # follow Semantic Versioning. They should reflect the version the application is using.
 # It is recommended to use it with quotes.
 appVersion: "1.16.0"
+
+icon: https://raw.githubusercontent.com/openimsdk/open-im-server/main/assets/openim-logo-gradient.svg
+
+maintainers:
+  - name: "OpenIM"
+    url: "https://github.com/openimsdk"
+
+keywords:
+  - openim
+  - im
+  - chat
+
+sources:
+  - "https://github.com/openimsdk/open-im-server"
+  - "https://github.com/openimsdk/helm-charts"

deployments/charts/openim-push/templates/deployment.yaml

@@ -48,10 +48,10 @@ spec:
           resources:
             {{- toYaml .Values.resources | nindent 12 }}
           volumeMounts:
-            - mountPath: /oepnim/openim-server/config/config.yaml
+            - mountPath: /openim/openim-server/config/config.yaml
               name: config
               subPath: config.yaml
-            - mountPath: /oepnim/openim-server/config/notification.yaml
+            - mountPath: /openim/openim-server/config/
               name: config
               subPath: notification.yaml
       volumes:

deployments/charts/openim-rpc-auth/Chart.yaml

@@ -22,3 +22,18 @@ version: 0.1.0
 # follow Semantic Versioning. They should reflect the version the application is using.
 # It is recommended to use it with quotes.
 appVersion: "1.16.0"
+
+icon: https://raw.githubusercontent.com/openimsdk/open-im-server/main/assets/openim-logo-gradient.svg
+
+maintainers:
+  - name: "OpenIM"
+    url: "https://github.com/openimsdk"
+
+keywords:
+  - openim
+  - im
+  - chat
+
+sources:
+  - "https://github.com/openimsdk/open-im-server"
+  - "https://github.com/openimsdk/helm-charts"

deployments/charts/openim-rpc-auth/templates/deployment.yaml

@@ -48,10 +48,10 @@ spec:
           resources:
             {{- toYaml .Values.resources | nindent 12 }}
           volumeMounts:
-            - mountPath: /oepnim/openim-server/config/config.yaml
+            - mountPath: /openim/openim-server/config/config.yaml
               name: config
               subPath: config.yaml
-            - mountPath: /oepnim/openim-server/config/notification.yaml
+            - mountPath: /openim/openim-server/config/
               name: config
               subPath: notification.yaml
       volumes:

deployments/charts/openim-rpc-conversation/Chart.yaml

@@ -22,3 +22,18 @@ version: 0.1.0
 # follow Semantic Versioning. They should reflect the version the application is using.
 # It is recommended to use it with quotes.
 appVersion: "1.16.0"
+
+icon: https://raw.githubusercontent.com/openimsdk/open-im-server/main/assets/openim-logo-gradient.svg
+
+maintainers:
+  - name: "OpenIM"
+    url: "https://github.com/openimsdk"
+
+keywords:
+  - openim
+  - im
+  - chat
+
+sources:
+  - "https://github.com/openimsdk/open-im-server"
+  - "https://github.com/openimsdk/helm-charts"

deployments/charts/openim-rpc-conversation/templates/deployment.yaml

@@ -48,10 +48,10 @@ spec:
           resources:
             {{- toYaml .Values.resources | nindent 12 }}
           volumeMounts:
-            - mountPath: /oepnim/openim-server/config/config.yaml
+            - mountPath: /openim/openim-server/config/config.yaml
               name: config
               subPath: config.yaml
-            - mountPath: /oepnim/openim-server/config/notification.yaml
+            - mountPath: /openim/openim-server/config/
               name: config
               subPath: notification.yaml
       volumes:

deployments/charts/openim-rpc-friend/Chart.yaml

@@ -22,3 +22,18 @@ version: 0.1.0
 # follow Semantic Versioning. They should reflect the version the application is using.
 # It is recommended to use it with quotes.
 appVersion: "1.16.0"
+
+icon: https://raw.githubusercontent.com/openimsdk/open-im-server/main/assets/openim-logo-gradient.svg
+
+maintainers:
+  - name: "OpenIM"
+    url: "https://github.com/openimsdk"
+
+keywords:
+  - openim
+  - im
+  - chat
+
+sources:
+  - "https://github.com/openimsdk/open-im-server"
+  - "https://github.com/openimsdk/helm-charts"

deployments/charts/openim-rpc-friend/templates/deployment.yaml

@@ -48,10 +48,10 @@ spec:
           resources:
             {{- toYaml .Values.resources | nindent 12 }}
           volumeMounts:
-            - mountPath: /oepnim/openim-server/config/config.yaml
+            - mountPath: /openim/openim-server/config/config.yaml
               name: config
               subPath: config.yaml
-            - mountPath: /oepnim/openim-server/config/notification.yaml
+            - mountPath: /openim/openim-server/config/
               name: config
               subPath: notification.yaml
       volumes:

deployments/charts/openim-rpc-group/Chart.yaml

@@ -22,3 +22,18 @@ version: 0.1.0
 # follow Semantic Versioning. They should reflect the version the application is using.
 # It is recommended to use it with quotes.
 appVersion: "1.16.0"
+
+icon: https://raw.githubusercontent.com/openimsdk/open-im-server/main/assets/openim-logo-gradient.svg
+
+maintainers:
+  - name: "OpenIM"
+    url: "https://github.com/openimsdk"
+
+keywords:
+  - openim
+  - im
+  - chat
+
+sources:
+  - "https://github.com/openimsdk/open-im-server"
+  - "https://github.com/openimsdk/helm-charts"

deployments/charts/openim-rpc-group/templates/deployment.yaml

@@ -48,10 +48,10 @@ spec:
           resources:
             {{- toYaml .Values.resources | nindent 12 }}
           volumeMounts:
-            - mountPath: /oepnim/openim-server/config/config.yaml
+            - mountPath: /openim/openim-server/config/config.yaml
               name: config
               subPath: config.yaml
-            - mountPath: /oepnim/openim-server/config/notification.yaml
+            - mountPath: /openim/openim-server/config/
               name: config
               subPath: notification.yaml
       volumes:

deployments/charts/openim-rpc-msg/Chart.yaml

@@ -22,3 +22,18 @@ version: 0.1.0
 # follow Semantic Versioning. They should reflect the version the application is using.
 # It is recommended to use it with quotes.
 appVersion: "1.16.0"
+
+icon: https://raw.githubusercontent.com/openimsdk/open-im-server/main/assets/openim-logo-gradient.svg
+
+maintainers:
+  - name: "OpenIM"
+    url: "https://github.com/openimsdk"
+
+keywords:
+  - openim
+  - im
+  - chat
+
+sources:
+  - "https://github.com/openimsdk/open-im-server"
+  - "https://github.com/openimsdk/helm-charts"

deployments/charts/openim-rpc-msg/templates/deployment.yaml

@@ -48,10 +48,10 @@ spec:
           resources:
             {{- toYaml .Values.resources | nindent 12 }}
           volumeMounts:
-            - mountPath: /oepnim/openim-server/config/config.yaml
+            - mountPath: /openim/openim-server/config/config.yaml
               name: config
               subPath: config.yaml
-            - mountPath: /oepnim/openim-server/config/notification.yaml
+            - mountPath: /openim/openim-server/config/
               name: config
               subPath: notification.yaml
       volumes:

deployments/charts/openim-rpc-third/Chart.yaml

@@ -22,3 +22,18 @@ version: 0.1.0
 # follow Semantic Versioning. They should reflect the version the application is using.
 # It is recommended to use it with quotes.
 appVersion: "1.16.0"
+
+icon: https://raw.githubusercontent.com/openimsdk/open-im-server/main/assets/openim-logo-gradient.svg
+
+maintainers:
+  - name: "OpenIM"
+    url: "https://github.com/openimsdk"
+
+keywords:
+  - openim
+  - im
+  - chat
+
+sources:
+  - "https://github.com/openimsdk/open-im-server"
+  - "https://github.com/openimsdk/helm-charts"

deployments/charts/openim-rpc-third/templates/deployment.yaml

@@ -48,10 +48,10 @@ spec:
           resources:
             {{- toYaml .Values.resources | nindent 12 }}
           volumeMounts:
-            - mountPath: /oepnim/openim-server/config/config.yaml
+            - mountPath: /openim/openim-server/config/config.yaml
               name: config
               subPath: config.yaml
-            - mountPath: /oepnim/openim-server/config/notification.yaml
+            - mountPath: /openim/openim-server/config/
               name: config
               subPath: notification.yaml
       volumes:

deployments/charts/openim-rpc-user/Chart.yaml

@@ -22,3 +22,18 @@ version: 0.1.0
 # follow Semantic Versioning. They should reflect the version the application is using.
 # It is recommended to use it with quotes.
 appVersion: "1.16.0"
+
+icon: https://raw.githubusercontent.com/openimsdk/open-im-server/main/assets/openim-logo-gradient.svg
+
+maintainers:
+  - name: "OpenIM"
+    url: "https://github.com/openimsdk"
+
+keywords:
+  - openim
+  - im
+  - chat
+
+sources:
+  - "https://github.com/openimsdk/open-im-server"
+  - "https://github.com/openimsdk/helm-charts"

deployments/charts/openim-rpc-user/templates/deployment.yaml

@@ -48,10 +48,10 @@ spec:
           resources:
             {{- toYaml .Values.resources | nindent 12 }}
           volumeMounts:
-            - mountPath: /oepnim/openim-server/config/config.yaml
+            - mountPath: /openim/openim-server/config/config.yaml
               name: config
               subPath: config.yaml
-            - mountPath: /oepnim/openim-server/config/notification.yaml
+            - mountPath: /openim/openim-server/config/
               name: config
               subPath: notification.yaml
       volumes:

deployments/templates/alertmanager.yml

@@ -0,0 +1,33 @@
+###################### AlertManager Configuration ######################
+# AlertManager configuration using environment variables
+#
+# Resolve timeout
+# SMTP configuration for sending alerts
+# Templates for email notifications
+# Routing configurations for alerts
+# Receiver configurations
+global:
+  resolve_timeout: ${ALERTMANAGER_RESOLVE_TIMEOUT}
+  smtp_from: ${ALERTMANAGER_SMTP_FROM}
+  smtp_smarthost: ${ALERTMANAGER_SMTP_SMARTHOST}
+  smtp_auth_username: ${ALERTMANAGER_SMTP_AUTH_USERNAME}
+  smtp_auth_password: ${ALERTMANAGER_SMTP_AUTH_PASSWORD}
+  smtp_require_tls: ${ALERTMANAGER_SMTP_REQUIRE_TLS}
+  smtp_hello: ${ALERTMANAGER_SMTP_HELLO}
+
+templates:
+  - /etc/alertmanager/email.tmpl
+
+route:
+  group_by: ['alertname']
+  group_wait: 5s
+  group_interval: 5s
+  repeat_interval: 5m
+  receiver: email
+receivers:
+  - name: email
+    email_configs:
+      - to: '${ALERTMANAGER_EMAIL_TO}'
+        html: '{{ template "email.to.html" . }}'
+        headers: { Subject: "[OPENIM-SERVER]Alarm" }
+        send_resolved: true

deployments/templates/chat.yaml

@@ -53,19 +53,6 @@ rpcRegisterName:
   openImAdminName: ${OPENIM_ADMIN_NAME}
   openImChatName: ${OPENIM_CHAT_NAME}
 
-###################### MySQL ######################
-mysql:
-  #  address: [ 127.0.0.1:13306 ]            #目前仅支持单机
-  #  username: root                          #用户名
-  #  password: openIM123                     #密码
-  #  database: openIM_v2                     #不建议修改
-  #  maxOpenConn: 1000                       #最大连接数
-  #  maxIdleConn: 100                        #最大空闲连接数
-  #  maxLifeTime: 60                         #连接可以重复使用的最长时间（秒）
-  #  logLevel: 4                             #日志级别 1=slient 2=error 3=warn 4=info
-  #  slowThreshold: 500                      #慢语句阈值 （毫秒）
-  database: openim_enterprise
-
 ###################### Log ######################
 log:
   storageLocation: ../logs/           #存放目录
@@ -96,7 +83,14 @@ verifyCode:
     accessKeySecret: ""
     signName: ""
     verificationCodeTemplateCode: ""
-
+  mail: # 根据对应的发件邮箱更改 sendMail、senderAuthorizationCode、smtpAddr、smtpPort 即可
+    title: ""
+    senderMail: "" # 发送者
+    senderAuthorizationCode: "" # 授权码
+    smtpAddr: "smtp.qq.com"  # smtp 服务器地址
+    smtpPort: 25   # smtp 服务器邮件发送端口
+  testDepartMentID: 001
+  imAPIURL: http://127.0.0.1:10002
 
 ###################### Proxy Header ######################
 # 获取ip的header,没有配置直接获取远程地址

deployments/templates/env-template.yaml

@@ -1,24 +1,10 @@
-# Copyright © 2023 OpenIM. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
 # ======================================
 # ========= Basic Configuration ========
 # ======================================
 
 # The user for authentication or system operations.
-# Default: USER=root
-USER=${USER}
+# Default: OPENIM_USER=root
+USER=${OPENIM_USER}
 
 # Password associated with the specified user for authentication.
 # Default: PASSWORD=openIM123
@@ -55,50 +41,19 @@ DOCKER_BRIDGE_SUBNET=${DOCKER_BRIDGE_SUBNET}
 # Default: DOCKER_BRIDGE_GATEWAY=172.28.0.1
 DOCKER_BRIDGE_GATEWAY=${DOCKER_BRIDGE_GATEWAY}
 
-# Address or hostname for the MySQL network.
-# Default: MYSQL_NETWORK_ADDRESS=172.28.0.2
-MYSQL_NETWORK_ADDRESS=${MYSQL_NETWORK_ADDRESS}
-
-# Address or hostname for the MongoDB network.
-# Default: MONGO_NETWORK_ADDRESS=172.28.0.3
 MONGO_NETWORK_ADDRESS=${MONGO_NETWORK_ADDRESS}
-
-# Address or hostname for the Redis network.
-# Default: REDIS_NETWORK_ADDRESS=172.28.0.4
 REDIS_NETWORK_ADDRESS=${REDIS_NETWORK_ADDRESS}
-
-# Address or hostname for the Kafka network.
-# Default: KAFKA_NETWORK_ADDRESS=172.28.0.5
 KAFKA_NETWORK_ADDRESS=${KAFKA_NETWORK_ADDRESS}
-
-# Address or hostname for the ZooKeeper network.
-# Default: ZOOKEEPER_NETWORK_ADDRESS=172.28.0.6
 ZOOKEEPER_NETWORK_ADDRESS=${ZOOKEEPER_NETWORK_ADDRESS}
-
-# Address or hostname for the MinIO network.
-# Default: MINIO_NETWORK_ADDRESS=172.28.0.7
 MINIO_NETWORK_ADDRESS=${MINIO_NETWORK_ADDRESS}
-
-# Address or hostname for the OpenIM web network.
-# Default: OPENIM_WEB_NETWORK_ADDRESS=172.28.0.8
 OPENIM_WEB_NETWORK_ADDRESS=${OPENIM_WEB_NETWORK_ADDRESS}
-
-# Address or hostname for the OpenIM server network.
-# Default: OPENIM_SERVER_NETWORK_ADDRESS=172.28.0.9
 OPENIM_SERVER_NETWORK_ADDRESS=${OPENIM_SERVER_NETWORK_ADDRESS}
-
-# Address or hostname for the OpenIM chat network.
-# Default: OPENIM_CHAT_NETWORK_ADDRESS=172.28.0.10
 OPENIM_CHAT_NETWORK_ADDRESS=${OPENIM_CHAT_NETWORK_ADDRESS}
-
-# Address or hostname for the Prometheus network.
-# Default: PROMETHEUS_NETWORK_ADDRESS=172.28.0.11
 PROMETHEUS_NETWORK_ADDRESS=${PROMETHEUS_NETWORK_ADDRESS}
-
-# Address or hostname for the Grafana network.
-# Default: GRAFANA_NETWORK_ADDRESS=172.28.0.12
 GRAFANA_NETWORK_ADDRESS=${GRAFANA_NETWORK_ADDRESS}
-
+NODE_EXPORTER_NETWORK_ADDRESS=${NODE_EXPORTER_NETWORK_ADDRESS}
+OPENIM_ADMIN_FRONT_NETWORK_ADDRESS=${OPENIM_ADMIN_FRONT_NETWORK_ADDRESS}
+ALERT_MANAGER_NETWORK_ADDRESS=${ALERT_MANAGER_NETWORK_ADDRESS}
 
 # ===============================================
 # = Component Extension Configuration =
@@ -114,20 +69,6 @@ ZOOKEEPER_ADDRESS=${ZOOKEEPER_NETWORK_ADDRESS}
 # Default: ZOOKEEPER_PORT=12181
 ZOOKEEPER_PORT=${ZOOKEEPER_PORT}
 
-# ----- MySQL Configuration -----
-
-# Address or hostname for the MySQL service.
-# Default: MYSQL_ADDRESS=172.28.0.1
-MYSQL_ADDRESS=${MYSQL_NETWORK_ADDRESS}
-
-# Port on which MySQL database service is running.
-# Default: MYSQL_PORT=13306
-MYSQL_PORT=${MYSQL_PORT}
-
-# Password to authenticate with the MySQL database service.
-# Default: MYSQL_PASSWORD=openIM123
-MYSQL_PASSWORD=${MYSQL_PASSWORD}
-
 # ----- MongoDB Configuration -----
 # Address or hostname for the MongoDB service.
 # Default: MONGO_ADDRESS=172.28.0.1
@@ -135,11 +76,11 @@ MONGO_ADDRESS=${MONGO_NETWORK_ADDRESS}
 
 # Port on which MongoDB service is running.
 # Default: MONGO_PORT=37017
-MONGO_PORT=${MONGO_PORT}
+# MONGO_PORT=${MONGO_PORT}
 
 # Username to authenticate with the MongoDB service.
 # Default: MONGO_USERNAME=root
-MONGO_USERNAME=${MONGO_USERNAME}
+# MONGO_USERNAME=${MONGO_USERNAME}
 
 # Password to authenticate with the MongoDB service.
 # Default: MONGO_PASSWORD=openIM123
@@ -167,6 +108,9 @@ REDIS_PASSWORD=${REDIS_PASSWORD}
 # Default: KAFKA_ADDRESS=172.28.0.1
 KAFKA_ADDRESS=${KAFKA_NETWORK_ADDRESS}
 
+# Kakfa username to authenticate with the Kafka service.
+# KAFKA_USERNAME=${KAFKA_USERNAME}
+
 # Port on which Kafka distributed streaming platform is running.
 # Default: KAFKA_PORT=19092
 KAFKA_PORT=${KAFKA_PORT}
@@ -194,7 +138,7 @@ MINIO_PORT=${MINIO_PORT}
 
 # Access key to authenticate with the MinIO service.
 # Default: MINIO_ACCESS_KEY=root
-MINIO_ACCESS_KEY=${MINIO_ACCESS_KEY}
+# MINIO_ACCESS_KEY=${MINIO_ACCESS_KEY}
 
 # Secret key corresponding to the access key for MinIO authentication.
 # Default: MINIO_SECRET_KEY=openIM123
@@ -215,7 +159,7 @@ PROMETHEUS_PORT=${PROMETHEUS_PORT}
 GRAFANA_ADDRESS=${GRAFANA_NETWORK_ADDRESS}
 
 # Port on which Grafana service is running.
-# Default: GRAFANA_PORT=3000
+# Default: GRAFANA_PORT=13000
 GRAFANA_PORT=${GRAFANA_PORT}
 
 # ======================================
@@ -283,3 +227,23 @@ SERVER_BRANCH=${SERVER_BRANCH}
 # Port for the OpenIM admin API.
 # Default: OPENIM_ADMIN_API_PORT=10009
 OPENIM_ADMIN_API_PORT=${OPENIM_ADMIN_API_PORT}
+  
+# Port for the node exporter.
+# Default: NODE_EXPORTER_PORT=19100
+NODE_EXPORTER_PORT=${NODE_EXPORTER_PORT}
+  
+# Port for the prometheus.
+# Default: PROMETHEUS_PORT=19090
+PROMETHEUS_PORT=${PROMETHEUS_PORT}
+  
+# Port for the grafana.
+# Default: GRAFANA_PORT=13000
+GRAFANA_PORT=${GRAFANA_PORT}
+  
+# Port for the admin front.
+# Default: OPENIM_ADMIN_FRONT_PORT=11002
+OPENIM_ADMIN_FRONT_PORT=${OPENIM_ADMIN_FRONT_PORT}
+
+# Port for the alertmanager.
+# Default: ALERT_MANAGER_PORT=19093
+ALERT_MANAGER_PORT=${ALERT_MANAGER_PORT}

deployments/templates/helm-image.yaml

@@ -0,0 +1,89 @@
+#This configuration file is used to override the use of the value.yaml variable.
+#Currently, only the configuration with ingressName as nginx is provided.
+#If it is another gateway such as istio or treafik, please modify the corresponding gateway requirements
+image:
+  repository: ${IMAGE_REGISTRY}/openim-api
+  pullPolicy: Always
+  tag: "${SERVER_IMAGE_TAG}"
+ingress:
+  enabled: true
+  className: "nginx"
+  annotations:
+    nginx.ingress.kubernetes.io/use-regex: "true"
+    nginx.ingress.kubernetes.io/rewrite-target: /$2
+  hosts:
+    - host: openim.server.com # your hostname
+      paths:
+        - path: /api(/|$)(.*)
+          pathType: ImplementationSpecific
+  tls:
+    - secretName: webapitls  #your hostname tls
+      hosts:
+        - openim.server.com
+
+openim-msggateway:
+  image:
+    repository: ${IMAGE_REGISTRY}/openim-msggateway
+    tag: "${SERVER_IMAGE_TAG}"
+    pullPolicy: Always
+  ingress:
+    enabled: true
+    className: "nginx"
+    annotations:
+      nginx.ingress.kubernetes.io/use-regex: "true"
+      nginx.ingress.kubernetes.io/rewrite-target: /$2
+    hosts:
+      - host: openim.server.com # your hostname
+        paths:
+          - path: /msg_gateway(/|$)(.*)
+            pathType: ImplementationSpecific
+    tls:
+      - secretName: webapitls  #your hostname tls
+        hosts:
+          - openim.server.com
+
+openim-msgtransfer:
+  image:
+    repository: ${IMAGE_REGISTRY}/openim-msgtransfer
+    tag: "${SERVER_IMAGE_TAG}"
+    pullPolicy: Always
+openim-push:
+  image:
+    repository: ${IMAGE_REGISTRY}/openim-push
+    tag: "${SERVER_IMAGE_TAG}"
+    pullPolicy: Always
+openim-rpc-auth:
+  image:
+    repository: ${IMAGE_REGISTRY}/openim-rpc-auth
+    tag: "${SERVER_IMAGE_TAG}"
+    pullPolicy: Always
+openim-rpc-conversation:
+  image:
+    repository: ${IMAGE_REGISTRY}/openim-rpc-conversation
+    tag: "${SERVER_IMAGE_TAG}"
+    pullPolicy: Always
+openim-rpc-friend:
+  image:
+    repository: ${IMAGE_REGISTRY}/openim-rpc-friend
+    tag: "${SERVER_IMAGE_TAG}"
+    pullPolicy: Always
+openim-rpc-group:
+  image:
+    repository: ${IMAGE_REGISTRY}/openim-rpc-group
+    tag: "${SERVER_IMAGE_TAG}"
+    pullPolicy: Always
+openim-rpc-msg:
+  image:
+    repository: ${IMAGE_REGISTRY}/openim-rpc-msg
+    tag: "${SERVER_IMAGE_TAG}"
+    pullPolicy: Always
+openim-rpc-third:
+  image:
+    repository: ${IMAGE_REGISTRY}/openim-rpc-third
+    tag: "${SERVER_IMAGE_TAG}"
+    pullPolicy: Always
+openim-rpc-user:
+  image:
+    repository: ${IMAGE_REGISTRY}/openim-rpc-user
+    tag: "${SERVER_IMAGE_TAG}"
+    pullPolicy: Always

deployments/templates/openim.service

@@ -1,6 +1,6 @@
 [Unit]
 Description=${SERVER_NAME} for OpenIM
-Documentation=https://github.com/openimsdk/open-im-server/blob/main/deployment/init/README.md
+Documentation=https://github.com/openimsdk/open-im-server/blob/main/deployment/README.md
 
 [Service]
 WorkingDirectory=${OPENIM_DATA_DIR}

deployments/templates/openim.target

@@ -0,0 +1,7 @@
+[Unit]
+Description=Unified target for OpenIM servers
+Requires=openim-api.service openim-push.service openim-rpc-group.service openim-crontask.service openim-rpc-auth.service openim-rpc-msg.service openim-msggateway.service openim-rpc-conversation.service openim-rpc-third.service openim-msgtransfer.service openim-rpc-friend.service openim-rpc-user.service
+After=openim-api.service openim-push.service openim-rpc-group.service openim-crontask.service openim-rpc-auth.service openim-rpc-msg.service openim-msggateway.service openim-rpc-conversation.service openim-rpc-third.service openim-msgtransfer.service openim-rpc-friend.service openim-rpc-user.service
+
+[Install]
+WantedBy=multi-user.target

deployments/templates/openim.yaml

@@ -35,35 +35,22 @@ zookeeper:
   username: ${ZOOKEEPER_USERNAME}
   password: ${ZOOKEEPER_PASSWORD}
 
-###################### Mysql ######################
-# MySQL configuration
-# Currently, only single machine setup is supported
-#
-# Maximum number of open connections
-# Maximum number of idle connections
-# Maximum lifetime in seconds a connection can be reused
-# Log level: 1=slient, 2=error, 3=warn, 4=info
-# Slow query threshold in milliseconds
-mysql:
-  address: [ ${MYSQL_ADDRESS}:${MYSQL_PORT} ]
-  username: ${MYSQL_USERNAME}
-  password: ${MYSQL_PASSWORD}
-  database: ${MYSQL_DATABASE}
-  maxOpenConn: ${MYSQL_MAX_OPEN_CONN}
-  maxIdleConn: ${MYSQL_MAX_IDLE_CONN}
-  maxLifeTime: ${MYSQL_MAX_LIFETIME}
-  logLevel: ${MYSQL_LOG_LEVEL}
-  slowThreshold: ${MYSQL_SLOW_THRESHOLD}
-
 ###################### Mongo ######################
 # MongoDB configuration
-# If uri is not empty, it will be used directly
-#
-# MongoDB address for standalone setup, Mongos address for sharded cluster setup
-# Default MongoDB database name
-# Maximum connection pool size
+
+# If uri is not empty, it will be used directly for the MongoDB connection.
+# This is a complete MongoDB URI string.
+# Example: mongodb://user:password@host1:port1,host2:port2/dbname?options
 mongo:
   uri: ${MONGO_URI}
+
+# List of MongoDB server addresses.
+# Used for constructing the MongoDB URI if 'uri' above is empty.
+# For a standalone setup, specify the address of the single server.
+# For a sharded cluster, specify the addresses of the Mongos servers.
+# Example: [ '172.28.0.1:37017', '172.28.0.2:37017' ]
+# Default MongoDB database name
+# Maximum connection pool size
   address: [ ${MONGO_ADDRESS}:${MONGO_PORT} ]
   database: ${MONGO_DATABASE}
   username: ${MONGO_USERNAME}
@@ -158,13 +145,21 @@ object:
     accessKeySecret: ${OSS_ACCESS_KEY_SECRET}
     sessionToken: ${OSS_SESSION_TOKEN}
     publicRead: ${OSS_PUBLIC_READ}
+  kodo:
+    endpoint: "${KODO_ENDPOINT}"
+    bucket: "${KODO_BUCKET}"
+    bucketURL: "${KODO_BUCKET_URL}"
+    accessKeyID: ${KODO_ACCESS_KEY_ID}
+    accessKeySecret: ${KODO_ACCESS_KEY_SECRET}
+    sessionToken: ${KODO_SESSION_TOKEN}
+    publicRead: ${KODO_PUBLIC_READ}
 
 ###################### RPC Port Configuration ######################
 # RPC service ports
 # These ports are passed into the program by the script and are not recommended to modify
 # For launching multiple programs, just fill in multiple ports separated by commas
 # For example, [10110, 10111]
-rpcPort: 
+rpcPort:
   openImUserPort: [ ${OPENIM_USER_PORT} ]
   openImFriendPort: [ ${OPENIM_FRIEND_PORT} ]
   openImMessagePort: [ ${OPENIM_MESSAGE_PORT} ]
@@ -312,77 +307,199 @@ iosPush:
 # Timeout in seconds
 # Whether to continue execution if callback fails
 callback:
-  url:
+  url: ""
   beforeSendSingleMsg:
-    enable: false
-    timeout: 5
-    failedContinue: true
+    enable: ${CALLBACK_ENABLE}
+    timeout: ${CALLBACK_TIMEOUT}
+    failedContinue: ${CALLBACK_FAILED_CONTINUE}
   afterSendSingleMsg:
-    enable: false
-    timeout: 5
+    enable: ${CALLBACK_ENABLE}
+    timeout: ${CALLBACK_TIMEOUT}
+    failedContinue: ${CALLBACK_FAILED_CONTINUE}
   beforeSendGroupMsg:
-    enable: false
-    timeout: 5
-    failedContinue: true
+    enable: ${CALLBACK_ENABLE}
+    timeout: ${CALLBACK_TIMEOUT}
+    failedContinue: ${CALLBACK_FAILED_CONTINUE}
   afterSendGroupMsg:
-    enable: false
-    timeout: 5
+    enable: ${CALLBACK_ENABLE}
+    timeout: ${CALLBACK_TIMEOUT}
+    failedContinue: ${CALLBACK_FAILED_CONTINUE}
   msgModify:
-    enable: false
-    timeout: 5
-    failedContinue: true
+    enable: ${CALLBACK_ENABLE}
+    timeout: ${CALLBACK_TIMEOUT}
+    failedContinue: ${CALLBACK_FAILED_CONTINUE}
   userOnline:
-    enable: false
-    timeout: 5
+    enable: ${CALLBACK_ENABLE}
+    timeout: ${CALLBACK_TIMEOUT}
+    failedContinue: ${CALLBACK_FAILED_CONTINUE}
   userOffline:
-    enable: false
-    timeout: 5
+    enable: ${CALLBACK_ENABLE}
+    timeout: ${CALLBACK_TIMEOUT}
+    failedContinue: ${CALLBACK_FAILED_CONTINUE}
   userKickOff:
-    enable: false
-    timeout: 5
+    enable: ${CALLBACK_ENABLE}
+    timeout: ${CALLBACK_TIMEOUT}
+    failedContinue: ${CALLBACK_FAILED_CONTINUE}
   offlinePush:
-    enable: false
-    timeout: 5
-    failedContinue: true
+    enable: ${CALLBACK_ENABLE}
+    timeout: ${CALLBACK_TIMEOUT}
+    failedContinue: ${CALLBACK_FAILED_CONTINUE}
   onlinePush:
-    enable: false
-    timeout: 5
-    failedContinue: true
+    enable: ${CALLBACK_ENABLE}
+    timeout: ${CALLBACK_TIMEOUT}
+    failedContinue: ${CALLBACK_FAILED_CONTINUE}
   superGroupOnlinePush:
-    enable: false
-    timeout: 5
-    failedContinue: true
+    enable: ${CALLBACK_ENABLE}
+    timeout: ${CALLBACK_TIMEOUT}
+    failedContinue: ${CALLBACK_FAILED_CONTINUE}
   beforeAddFriend:
-    enable: false
-    timeout: 5
-    failedContinue: true
+    enable: ${CALLBACK_ENABLE}
+    timeout: ${CALLBACK_TIMEOUT}
+    failedContinue: ${CALLBACK_FAILED_CONTINUE}
   beforeUpdateUserInfo:
-    enable: false
-    timeout: 5
-    failedContinue: true
+    enable: ${CALLBACK_ENABLE}
+    timeout: ${CALLBACK_TIMEOUT}
+    failedContinue: ${CALLBACK_FAILED_CONTINUE}
   beforeCreateGroup:
-    enable: false
-    timeout: 5
-    failedContinue: true
+    enable: ${CALLBACK_ENABLE}
+    timeout: ${CALLBACK_TIMEOUT}
+    failedContinue: ${CALLBACK_FAILED_CONTINUE}
+  afterCreateGroup:
+    enable: ${CALLBACK_ENABLE}
+    timeout: ${CALLBACK_TIMEOUT}
+    failedContinue: ${CALLBACK_FAILED_CONTINUE}
   beforeMemberJoinGroup:
-    enable: false
-    timeout: 5
-    failedContinue: true
+    enable: ${CALLBACK_ENABLE}
+    timeout: ${CALLBACK_TIMEOUT}
+    failedContinue: ${CALLBACK_FAILED_CONTINUE}
   beforeSetGroupMemberInfo:
-    enable: false
-    timeout: 5
-    failedContinue: true
+    enable: ${CALLBACK_ENABLE}
+    timeout: ${CALLBACK_TIMEOUT}
+    failedContinue: ${CALLBACK_FAILED_CONTINUE}
+  afterSetGroupMemberInfo:
+    enable: ${CALLBACK_ENABLE}
+    timeout: ${CALLBACK_TIMEOUT}
+    failedContinue: ${CALLBACK_FAILED_CONTINUE}
   setMessageReactionExtensions:
-    enable: false
-    timeout: 5
-    failedContinue: true
-
+    enable: ${CALLBACK_ENABLE}
+    timeout: ${CALLBACK_TIMEOUT}
+    failedContinue: ${CALLBACK_FAILED_CONTINUE}
+  quitGroup:
+    enable: ${CALLBACK_ENABLE}
+    timeout: ${CALLBACK_TIMEOUT}
+    failedContinue: ${CALLBACK_FAILED_CONTINUE}
+  killGroupMember:
+    enable: ${CALLBACK_ENABLE}
+    timeout: ${CALLBACK_TIMEOUT}
+    failedContinue: ${CALLBACK_FAILED_CONTINUE}
+  dismissGroup:
+    enable: ${CALLBACK_ENABLE}
+    timeout: ${CALLBACK_TIMEOUT}
+    failedContinue: ${CALLBACK_FAILED_CONTINUE}
+  joinGroup:
+    enable: ${CALLBACK_ENABLE}
+    timeout: ${CALLBACK_TIMEOUT}
+    failedContinue: ${CALLBACK_FAILED_CONTINUE}
+  groupMsgRead:
+    enable: ${CALLBACK_ENABLE}
+    timeout: ${CALLBACK_TIMEOUT}
+    failedContinue: ${CALLBACK_FAILED_CONTINUE}
+  singleMsgRead:
+    enable: ${CALLBACK_ENABLE}
+    timeout: ${CALLBACK_TIMEOUT}
+    failedContinue: ${CALLBACK_FAILED_CONTINUE}
+  updateUserInfo:
+    enable: ${CALLBACK_ENABLE}
+    timeout: ${CALLBACK_TIMEOUT}
+    failedContinue: ${CALLBACK_FAILED_CONTINUE}
+  beforeUserRegister:
+    enable: ${CALLBACK_ENABLE}
+    timeout: ${CALLBACK_TIMEOUT}
+    failedContinue: ${CALLBACK_FAILED_CONTINUE}
+  afterUserRegister:
+    enable: ${CALLBACK_ENABLE}
+    timeout: ${CALLBACK_TIMEOUT}
+    failedContinue: ${CALLBACK_FAILED_CONTINUE}
+  transferGroupOwner:
+    enable: ${CALLBACK_ENABLE}
+    timeout: ${CALLBACK_TIMEOUT}
+    failedContinue: ${CALLBACK_FAILED_CONTINUE}
+  beforeSetFriendRemark:
+    enable: ${CALLBACK_ENABLE}
+    timeout: ${CALLBACK_TIMEOUT}
+    failedContinue: ${CALLBACK_FAILED_CONTINUE}
+  afterSetFriendRemark:
+    enable: ${CALLBACK_ENABLE}
+    timeout: ${CALLBACK_TIMEOUT}
+    failedContinue: ${CALLBACK_FAILED_CONTINUE}
+  afterGroupMsgRead:
+    enable: ${CALLBACK_ENABLE}
+    timeout: ${CALLBACK_TIMEOUT}
+    failedContinue: ${CALLBACK_FAILED_CONTINUE}
+  afterGroupMsgRevoke:
+    enable: ${CALLBACK_ENABLE}
+    timeout: ${CALLBACK_TIMEOUT}
+    failedContinue: ${CALLBACK_FAILED_CONTINUE}
+  afterJoinGroup:
+    enable: ${CALLBACK_ENABLE}
+    timeout: ${CALLBACK_TIMEOUT}
+    failedContinue: ${CALLBACK_FAILED_CONTINUE}
+  beforeInviteUserToGroup:
+    enable: ${CALLBACK_ENABLE}
+    timeout: ${CALLBACK_TIMEOUT}
+    failedContinue: ${CALLBACK_FAILED_CONTINUE}
+  joinGroupAfter:
+    enable: ${CALLBACK_ENABLE}
+    timeout: ${CALLBACK_TIMEOUT}
+    failedContinue: ${CALLBACK_FAILED_CONTINUE}
+  setGroupInfoAfter:
+    enable: ${CALLBACK_ENABLE}
+    timeout: ${CALLBACK_TIMEOUT}
+    failedContinue: ${CALLBACK_FAILED_CONTINUE}
+  setGroupInfoBefore:
+    enable: ${CALLBACK_ENABLE}
+    timeout: ${CALLBACK_TIMEOUT}
+    failedContinue: ${CALLBACK_FAILED_CONTINUE}
+  revokeMsgAfter:
+    enable: ${CALLBACK_ENABLE}
+    timeout: ${CALLBACK_TIMEOUT}
+    failedContinue: ${CALLBACK_FAILED_CONTINUE}
+  addBlackBefore:
+    enable: ${CALLBACK_ENABLE}
+    timeout: ${CALLBACK_TIMEOUT}
+    failedContinue: ${CALLBACK_FAILED_CONTINUE}
+  addFriendAfter:
+    enable: ${CALLBACK_ENABLE}
+    timeout: ${CALLBACK_TIMEOUT}
+    failedContinue: ${CALLBACK_FAILED_CONTINUE}
+  addFriendAgreeBefore:
+    enable: ${CALLBACK_ENABLE}
+    timeout: ${CALLBACK_TIMEOUT}
+    failedContinue: ${CALLBACK_FAILED_CONTINUE}
+  deleteFriendAfter:
+    enable: ${CALLBACK_ENABLE}
+    timeout: ${CALLBACK_TIMEOUT}
+    failedContinue: ${CALLBACK_FAILED_CONTINUE}
+  importFriendsBefore:
+    enable: ${CALLBACK_ENABLE}
+    timeout: ${CALLBACK_TIMEOUT}
+    failedContinue: ${CALLBACK_FAILED_CONTINUE}
+  importFriendsAfter:
+    enable: ${CALLBACK_ENABLE}
+    timeout: ${CALLBACK_TIMEOUT}
+    failedContinue: ${CALLBACK_FAILED_CONTINUE}
+  removeBlackAfter:
+    enable: ${CALLBACK_ENABLE}
+    timeout: ${CALLBACK_TIMEOUT}
+    failedContinue: ${CALLBACK_FAILED_CONTINUE}
 ###################### Prometheus ######################
 # Prometheus configuration for various services
 # The number of Prometheus ports per service needs to correspond to rpcPort
 # The number of ports needs to be consistent with msg_transfer_service_num in script/path_info.sh
 prometheus:
   enable: ${PROMETHEUS_ENABLE}
+  prometheusUrl: ${PROMETHEUS_URL}
+  apiPrometheusPort: [${API_PROM_PORT}]
   userPrometheusPort: [ ${USER_PROM_PORT} ]
   friendPrometheusPort: [ ${FRIEND_PROM_PORT} ]
   messagePrometheusPort: [ ${MESSAGE_PROM_PORT} ]
@@ -393,4 +510,4 @@ prometheus:
   conversationPrometheusPort: [ ${CONVERSATION_PROM_PORT} ]
   rtcPrometheusPort: [ ${RTC_PROM_PORT} ]
   thirdPrometheusPort: [ ${THIRD_PROM_PORT} ]
-  messageTransferPrometheusPort: [ ${MSG_TRANSFER_PROM_PORT} ] # List of ports
+  messageTransferPrometheusPort: [ ${MSG_TRANSFER_PROM_PORT} ] # List of ports

deployments/templates/prometheus.yml

@@ -0,0 +1,85 @@
+# my global config
+global:
+  scrape_interval:     15s # Set the scrape interval to every 15 seconds. Default is every 1 minute.
+  evaluation_interval: 15s # Evaluate rules every 15 seconds. The default is every 1 minute.
+  # scrape_timeout is set to the global default (10s).
+
+# Alertmanager configuration
+alerting:
+  alertmanagers:
+    - static_configs:
+        - targets: ['${ALERT_MANAGER_ADDRESS}:${ALERT_MANAGER_PORT}']
+
+# Load rules once and periodically evaluate them according to the global 'evaluation_interval'.
+rule_files:
+  - "instance-down-rules.yml"
+# - "first_rules.yml"
+# - "second_rules.yml"
+
+# A scrape configuration containing exactly one endpoint to scrape:
+# Here it's Prometheus itself.
+scrape_configs:
+  # The job name is added as a label "job='job_name'"" to any timeseries scraped from this config.
+  # Monitored information captured by prometheus
+  - job_name: 'node-exporter'
+    static_configs:
+      - targets: [ '${NODE_EXPORTER_ADDRESS}:${NODE_EXPORTER_PORT}' ]
+        labels:
+          namespace: 'default'
+
+  # prometheus fetches application services
+  - job_name: 'openimserver-openim-api'
+    static_configs:
+      - targets: [ '${OPENIM_SERVER_ADDRESS}:${API_PROM_PORT}' ]
+        labels:
+          namespace: 'default'
+  - job_name: 'openimserver-openim-msggateway'
+    static_configs:
+      - targets: [ '${OPENIM_SERVER_ADDRESS}:${MSG_GATEWAY_PROM_PORT}' ]
+        labels:
+          namespace: 'default'
+  - job_name: 'openimserver-openim-msgtransfer'
+    static_configs:
+      - targets: [ ${MSG_TRANSFER_PROM_ADDRESS_PORT} ]
+        labels:
+          namespace: 'default'
+  - job_name: 'openimserver-openim-push'
+    static_configs:
+      - targets: [ '${OPENIM_SERVER_ADDRESS}:${PUSH_PROM_PORT}' ]
+        labels:
+          namespace: 'default'
+  - job_name: 'openimserver-openim-rpc-auth'
+    static_configs:
+      - targets: [ '${OPENIM_SERVER_ADDRESS}:${AUTH_PROM_PORT}' ]
+        labels:
+          namespace: 'default'
+  - job_name: 'openimserver-openim-rpc-conversation'
+    static_configs:
+      - targets: [ '${OPENIM_SERVER_ADDRESS}:${CONVERSATION_PROM_PORT}' ]
+        labels:
+          namespace: 'default'
+  - job_name: 'openimserver-openim-rpc-friend'
+    static_configs:
+      - targets: [ '${OPENIM_SERVER_ADDRESS}:${FRIEND_PROM_PORT}' ]
+        labels:
+          namespace: 'default'
+  - job_name: 'openimserver-openim-rpc-group'
+    static_configs:
+      - targets: [ '${OPENIM_SERVER_ADDRESS}:${GROUP_PROM_PORT}' ]
+        labels:
+          namespace: 'default'
+  - job_name: 'openimserver-openim-rpc-msg'
+    static_configs:
+      - targets: [ '${OPENIM_SERVER_ADDRESS}:${MESSAGE_PROM_PORT}' ]
+        labels:
+          namespace: 'default'
+  - job_name: 'openimserver-openim-rpc-third'
+    static_configs:
+      - targets: [ '${OPENIM_SERVER_ADDRESS}:${THIRD_PROM_PORT}' ]
+        labels:
+          namespace: 'default'
+  - job_name: 'openimserver-openim-rpc-user'
+    static_configs:
+      - targets: [ '${OPENIM_SERVER_ADDRESS}:${USER_PROM_PORT}' ]
+        labels:
+          namespace: 'default'

docker-compose.yml

@@ -7,202 +7,181 @@ networks:
     ipam:
       driver: default
       config:
-        - subnet: '${DOCKER_BRIDGE_SUBNET}'
-          gateway: '${DOCKER_BRIDGE_GATEWAY}'
+        - subnet: '${DOCKER_BRIDGE_SUBNET:-172.28.0.0/16}'
+          gateway: '${DOCKER_BRIDGE_GATEWAY:-172.28.0.1}'
 
 services:
-  mysql:
-    image: mysql:5.7
-    ports:
-      - "${MYSQL_PORT}:3306"
-    container_name: mysql
-    volumes:
-      - "${DATA_DIR}/components/mysql/data:/var/lib/mysql"
-      - "/etc/localtime:/etc/localtime"
-    environment:
-      MYSQL_ROOT_PASSWORD: "${MYSQL_PASSWORD}"
-    restart: always
-    networks:
-      server:
-        ipv4_address: ${MYSQL_NETWORK_ADDRESS}
-
   mongodb:
-    image: mongo:6.0.2
+    image: mongo:${MONGODB_IMAGE_VERSION-6.0.2}
     ports:
-      - "${MONGO_PORT}:27017"
+      - "${MONGO_PORT:-37017}:27017"
     container_name: mongo
     command: --wiredTigerCacheSizeGB 1 --auth
     volumes:
-      - "${DATA_DIR}/components/mongodb/data/db:/data/db"
-      - "${DATA_DIR}/components/mongodb/data/logs:/data/logs"
-      - "${DATA_DIR}/components/mongodb/data/conf:/etc/mongo"
-      - ./scripts/mongo-init.sh:/docker-entrypoint-initdb.d/mongo-init.sh:ro"
+      - "${DATA_DIR:-./}/components/mongodb/data/db:/data/db"
+      - "${DATA_DIR:-./}/components/mongodb/data/logs:/data/logs"
+      - "${DATA_DIR:-./}/components/mongodb/data/conf:/etc/mongo"
+      - ./scripts/mongo-init.sh:/docker-entrypoint-initdb.d/mongo-init.sh:ro
     environment:
       - TZ=Asia/Shanghai
       - wiredTigerCacheSizeGB=1
-      - MONGO_INITDB_ROOT_USERNAME=${MONGO_USERNAME}
-      - MONGO_INITDB_ROOT_PASSWORD=${MONGO_PASSWORD}
-      - MONGO_INITDB_DATABASE=${MONGO_DATABASE}
+      - MONGO_INITDB_ROOT_USERNAME=${MONGO_USERNAME:-root}
+      - MONGO_INITDB_ROOT_PASSWORD=${MONGO_PASSWORD:-openIM123}
+      - MONGO_INITDB_DATABASE=${MONGO_DATABASE:-openIM_v3}
     restart: always
     networks:
       server:
-        ipv4_address: ${MONGO_NETWORK_ADDRESS}
+        ipv4_address: ${MONGO_NETWORK_ADDRESS:-172.28.0.2}
 
   redis:
-    image: redis:7.0.0
+    image: redis:${REDIS_IMAGE_VERSION:-7.0.0}
     container_name: redis
     ports:
-      - "${REDIS_PORT}:6379"
+      - "${REDIS_PORT:-16379}:6379"
     volumes:
-      - "${DATA_DIR}/components/redis/data:/data"
-      - "${DATA_DIR}/components/redis/config/redis.conf:/usr/local/redis/config/redis.conf"
+      - "${DATA_DIR:-./}/components/redis/data:/data"
+      - "${DATA_DIR:-./}/components/redis/config/redis.conf:/usr/local/redis/config/redis.conf"
     environment:
       TZ: Asia/Shanghai
     restart: always
     sysctls:
       net.core.somaxconn: 1024
-    command: redis-server --requirepass ${REDIS_PASSWORD} --appendonly yes
+    command: redis-server --requirepass ${REDIS_PASSWORD:-openIM123} --appendonly yes
     networks:
       server:
-        ipv4_address: ${REDIS_NETWORK_ADDRESS}
+        ipv4_address: ${REDIS_NETWORK_ADDRESS:-172.28.0.3}
 
   zookeeper:
-   image: bitnami/zookeeper:3.8
-   container_name: zookeeper
-   ports:
-    - "${ZOOKEEPER_PORT}:2181"
-   volumes:
-     - "/etc/localtime:/etc/localtime"
-   environment:
-     - ALLOW_ANONYMOUS_LOGIN=yes
-     - TZ="Asia/Shanghai"
-   restart: always
-   networks:
+    image: bitnami/zookeeper:${ZOOKEEPER_IMAGE_VERSION:-3.8}
+    container_name: zookeeper
+    ports:
+     - "${ZOOKEEPER_PORT:-12181}:2181"
+    volumes:
+      - "/etc/localtime:/etc/localtime"
+    environment:
+      - ALLOW_ANONYMOUS_LOGIN=yes
+      - TZ="Asia/Shanghai"
+    restart: always
+    networks:
       server:
-        ipv4_address: ${ZOOKEEPER_NETWORK_ADDRESS}
+        ipv4_address: ${ZOOKEEPER_NETWORK_ADDRESS:-172.28.0.5}
 
   kafka:
-    image: 'bitnami/kafka:3.5.1'
+    image: 'bitnami/kafka:${KAFKA_IMAGE_VERSION:-3.5.1}'
     container_name: kafka
-    user: root
     restart: always
+    user: ${KAFKA_USER:-root}
     ports:
-    - "${KAFKA_PORT}:9094"
+      - "${KAFKA_PORT:-19094}:9094"
     volumes:
-      - ./scripts/create_topic.sh:/opt/bitnami/kafka/create_topic.sh
-      - ${DATA_DIR}/components/kafka:/bitnami/kafka
+      - ./scripts/create-topic.sh:/opt/bitnami/kafka/create-topic.sh
+      - "${DATA_DIR:-./}/components/kafka:/bitnami/kafka"
     command: >
-      bash -c "
-      /opt/bitnami/scripts/kafka/run.sh & sleep 5; /opt/bitnami/kafka/create_topic.sh; wait
-      "
+      bash -c "/opt/bitnami/scripts/kafka/run.sh & sleep 5; /opt/bitnami/kafka/create-topic.sh; wait"
     environment:
        - TZ=Asia/Shanghai
        - KAFKA_CFG_NODE_ID=0
        - KAFKA_CFG_PROCESS_ROLES=controller,broker
        - KAFKA_CFG_CONTROLLER_QUORUM_VOTERS=0@<your_host>:9093
        - KAFKA_CFG_LISTENERS=PLAINTEXT://:9092,CONTROLLER://:9093,EXTERNAL://:9094
-       - KAFKA_CFG_ADVERTISED_LISTENERS=PLAINTEXT://kafka:9092,EXTERNAL://${DOCKER_BRIDGE_GATEWAY}:${KAFKA_PORT}
+       - KAFKA_CFG_ADVERTISED_LISTENERS=PLAINTEXT://kafka:9092,EXTERNAL://${DOCKER_BRIDGE_GATEWAY:-172.28.0.1}:${KAFKA_PORT:-19094}
        - KAFKA_CFG_LISTENER_SECURITY_PROTOCOL_MAP=CONTROLLER:PLAINTEXT,EXTERNAL:PLAINTEXT,PLAINTEXT:PLAINTEXT
        - KAFKA_CFG_CONTROLLER_LISTENER_NAMES=CONTROLLER
     networks:
       server:
-        ipv4_address: ${KAFKA_NETWORK_ADDRESS}
+        ipv4_address: ${KAFKA_NETWORK_ADDRESS:-172.28.0.4}
 
   minio:
-    image: minio/minio
+    image: minio/minio:${MINIO_IMAGE_VERSION:-latest}
     ports:
-      - "${MINIO_PORT}:9000"
+      - "${MINIO_PORT:-10005}:9000"
       - "9090:9090"
     container_name: minio
     volumes:
-      - "${DATA_DIR}/components/mnt/data:/data"
-      - "${DATA_DIR}/components/mnt/config:/root/.minio"
+      - "${DATA_DIR:-./}/components/mnt/data:/data"
+      - "${DATA_DIR:-./}/components/mnt/config:/root/.minio"
     environment:
-      MINIO_ROOT_USER: "${MINIO_ACCESS_KEY}"
-      MINIO_ROOT_PASSWORD: "${MINIO_SECRET_KEY}"
+      MINIO_ROOT_USER: "${MINIO_ACCESS_KEY:-root}"
+      MINIO_ROOT_PASSWORD: "${MINIO_SECRET_KEY:-openIM123}"
     restart: always
     command: minio server /data --console-address ':9090'
     networks:
       server:
-        ipv4_address: ${MINIO_NETWORK_ADDRESS}
+        ipv4_address: ${MINIO_NETWORK_ADDRESS:-172.28.0.6}
 
   openim-web:
-    # image: ghcr.io/openimsdk/openim-web:latest
-    # image: registry.cn-hangzhou.aliyuncs.com/openimsdk/openim-web:latest
-    # image: openim/openim-web:latest
-    image: ${IMAGE_REGISTRY}/openim-web:latest
+    image: ${IMAGE_REGISTRY:-ghcr.io/openimsdk}/openim-web:${OPENIM_WEB_IMAGE_VERSION:-latest}
     container_name: openim-web
     environment:
-      - OPENIM_WEB_DIST_PATH=${OPENIM_WEB_DIST_PATH}
-      - OPENIM_WEB_PORT=${OPENIM_WEB_PORT}
+      - OPENIM_WEB_DIST_PATH=${OPENIM_WEB_DIST_PATH:-/app/dist}
+      - OPENIM_WEB_PORT=${OPENIM_WEB_PORT:-11001}
     restart: always
     ports:
-      - "${OPENIM_WEB_PORT}:11001"
+      - "${OPENIM_WEB_PORT:-11001}:11001"
     networks:
       server:
-        ipv4_address: ${OPENIM_WEB_NETWORK_ADDRESS}
+        ipv4_address: ${OPENIM_WEB_NETWORK_ADDRESS:-172.28.0.7}
 
-#   openim-server:
-#     # image: ghcr.io/openimsdk/openim-server:main
-#     # image: registry.cn-hangzhou.aliyuncs.com/openimsdk/openim-server:main
-#     # image: openim/openim-server:main
-#     image: ${IMAGE_REGISTRY}/openim-server:main
-# #    build: .
-#     container_name: openim-server
-#     ports:
-#       - ${OPENIM_WS_PORT}:10001
-#       - ${API_OPENIM_PORT}:10002
-#     healthcheck:
-#       test: ["CMD", "/openim/openim-server/scripts/check-all.sh"]
-#       interval: 300s
-#       timeout: 10s
-#       retries: 5
-#     volumes:
-#       - ./logs:/openim/openim-server/logs
-#       - ./_output/logs:/openim/openim-server/_output/logs
-#       - ./config:/openim/openim-server/config
-#       - ./scripts:/openim/openim-server/scripts
-#     restart: always
-#     depends_on:
-#       - kafka
-#       - mysql
-#       - mongodb
-#       - redis
-#       - minio
-#     logging:
-#       driver: json-file
-#       options:
-#         max-size: "1g"
-#         max-file: "2"
-#     networks:
-#       server:
-#         ipv4_address: ${OPENIM_SERVER_NETWORK_ADDRESS}
+  # Uncomment and configure the following services as needed
+  # openim-admin:
+  #   image: ${IMAGE_REGISTRY:-ghcr.io/openimsdk}/openim-admin-front:v3.4.0
+  #   container_name: openim-admin
+  #   restart: always
+  #   ports:
+  #     - "${OPENIM_ADMIN_FRONT_PORT:-11002}:80"
+  #   networks:
+  #     server:
+  #       ipv4_address: ${OPENIM_ADMIN_FRONT_NETWORK_ADDRESS:-172.28.0.13}
 
-#   prometheus:
-#     image: prom/prometheus
-#     volumes:
-#       - ./.docker-compose_cfg/prometheus-compose.yml:/etc/prometheus/prometheus.yml
-#     container_name: prometheus
-#     ports:
-#       - ${PROMETHEUS_PORT}:9091
-#     depends_on:
-#       - openim-server
-#     command: --web.listen-address=:9091 --config.file="/etc/prometheus/prometheus.yml"
-#     networks:
-#       openim-server:
-#         ipv4_address: ${PROMETHEUS_NETWORK_ADDRESS}
+  # prometheus:
+  #   image: prom/prometheus
+  #   container_name: prometheus
+  #   hostname: prometheus
+  #   restart: always
+  #   volumes:
+  #     - ./config/prometheus.yml:/etc/prometheus/prometheus.yml
+  #     - ./config/instance-down-rules.yml:/etc/prometheus/instance-down-rules.yml
+  #   ports:
+  #     - "${PROMETHEUS_PORT:-19090}:9090"
+  #   networks:
+  #     server:
+  #       ipv4_address: ${PROMETHEUS_NETWORK_ADDRESS:-172.28.0.10}
 
-#   grafana:
-#     image: grafana/grafana
-#     volumes:
-#       - ./.docker-compose_cfg/datasource-compose.yaml:/etc/grafana/provisioning/datasources/datasource.yaml
-#       - ./.docker-compose_cfg/grafana.ini:/etc/grafana/grafana.ini
-#       - ./.docker-compose_cfg/node-exporter-full_rev1.json:/var/lib/grafana/dashboards/node-exporter-full_rev1.json
-#     container_name: grafana
-#     ports:
-#       - ${GRAFANA_PORT}:3000
-#     depends_on:
-#       - prometheus
-#     networks:
-#       openim-server:
-#         ipv4_address: ${GRAFANA_NETWORK_ADDRESS}
+  # alertmanager:
+  #   image: prom/alertmanager
+  #   container_name: alertmanager
+  #   hostname: alertmanager
+  #   restart: always
+  #   volumes:
+  #     - ./config/alertmanager.yml:/etc/alertmanager/alertmanager.yml
+  #     - ./config/email.tmpl:/etc/alertmanager/email.tmpl
+  #   ports:
+  #     - "${ALERT_MANAGER_PORT:-19093}:9093"
+  #   networks:
+  #     server:
+  #       ipv4_address: ${ALERT_MANAGER_NETWORK_ADDRESS:-172.28.0.14}
+
+  # grafana:
+  #   image: grafana/grafana
+  #   container_name: grafana
+  #   hostname: grafana
+  #   user: root
+  #   restart: always
+  #   ports:
+  #     - "${GRAFANA_PORT:-13000}:3000"
+  #   volumes:
+  #     - ${DATA_DIR:-./}/components/grafana:/var/lib/grafana
+  #   networks:
+  #     server:
+  #       ipv4_address: ${GRAFANA_NETWORK_ADDRESS:-172.28.0.11}
+
+  # node-exporter:
+  #   image: quay.io/prometheus/node-exporter
+  #   container_name: node-exporter
+  #   hostname: node-exporter
+  #   restart: always
+  #   ports:
+  #     - "${NODE_EXPORTER_PORT:-19100}:9100"
+  #   networks:
+  #     server:
+  #       ipv4_address: ${NODE_EXPORTER_NETWORK_ADDRESS:-172.28.0.12}

docs/CODEOWNERS

@@ -2,28 +2,28 @@
 # Each line is a file pattern followed by one or more owners.
 
 # README files
-README.md @openimsdk/openim @cubxxw @openimsdk/bot @Bloomingg @FGadvancer  @skiffer-git  @wangchuxiao-dev @withchao
+README.md @openimsdk/openim @cubxxw @openimsdk/bot @Bloomingg @FGadvancer  @skiffer-git  @rfyiamcool @withchao
 
 # Contributing guidelines
-CONTRIBUTING.md @cubxxw @openimsdk/bot @Bloomingg @FGadvancer  @skiffer-git  @wangchuxiao-dev @withchao
+CONTRIBUTING.md @cubxxw @openimsdk/bot @Bloomingg @FGadvancer  @skiffer-git  @rfyiamcool @withchao
 
 # License files
-LICENSE    @cubxxw @openimsdk/bot @Bloomingg @FGadvancer  @skiffer-git  @wangchuxiao-dev @withchao
+LICENSE    @cubxxw @openimsdk/bot @Bloomingg @FGadvancer  @skiffer-git  @rfyiamcool @withchao
 
 # Makefile
-Makefile    @cubxxw @openimsdk/bot @Bloomingg @FGadvancer  @skiffer-git  @wangchuxiao-dev @withchao
+Makefile    @cubxxw @openimsdk/bot @Bloomingg @FGadvancer  @skiffer-git  @rfyiamcool @withchao
 
 # These owners will be the default owners for everything in
 # the repo. Unless a later match takes precedence,
 # @cubxxw and @openimsdk/bot will be requested for
 # review when someone opens a pull request.
-* @openimsdk/openim @cubxxw @openimsdk/bot @Bloomingg @FGadvancer  @skiffer-git  @wangchuxiao-dev @withchao
+* @openimsdk/openim @cubxxw @openimsdk/bot @Bloomingg @FGadvancer  @skiffer-git  @rfyiamcool @withchao
 
 # Order is important; the last matching pattern takes the most
 # precedence. When someone opens a pull request that only
 # modifies JS files, only @js-owner and not the global
 # owner(s) will be requested for a review.
-*.js   @cubxxw @openimsdk/bot @Bloomingg @FGadvancer  @skiffer-git  @wangchuxiao-dev @withchao
+*.js   @cubxxw @openimsdk/bot @Bloomingg @FGadvancer  @skiffer-git  @rfyiamcool @withchao
 
 # You can also use email addresses if you prefer. They'll be
 # used to look up users just like we do for commit author
@@ -35,7 +35,7 @@ Makefile    @cubxxw @openimsdk/bot @Bloomingg @FGadvancer  @skiffer-git  @wangch
 # be identified in the format @org/team-name. Teams must have
 # explicit write access to the repository. In this example,
 # the OpenIMSDK team in the github organization owns all .txt files.
-*.txt @cubxxw @openimsdk/bot @Bloomingg @FGadvancer  @skiffer-git  @wangchuxiao-dev @withchao
+*.txt @cubxxw @openimsdk/bot @Bloomingg @FGadvancer  @skiffer-git  @rfyiamcool @withchao
 
 # The `docs/*` pattern will match files like
 # `docs/getting-started.md` but not further nested files like

docs/README.md

@@ -5,7 +5,7 @@ Welcome to the OpenIM Documentation hub! This center provides a comprehensive ra
 ## Table of Contents
 
 1. [Contrib](https://github.com/openimsdk/open-im-server/blob/main/docs/contrib) - Guidance on contributing and configurations for developers
-2. [Conversions](https://github.com/openimsdk/open-im-server/blob/main/docs/conversions) - Coding conventions, logging policies, and other transformation tools
+2. [Conversions](https://github.com/openimsdk/open-im-server/blob/main/docs/contrib) - Coding conventions, logging policies, and other transformation tools
 
 ------
 
@@ -13,34 +13,34 @@ Welcome to the OpenIM Documentation hub! This center provides a comprehensive ra
 
 This section offers developers a detailed guide on how to contribute code, set up their environment, and follow the associated processes.
 
-- [Code Conventions](https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/code_conventions.md) - Rules and conventions for writing code in OpenIM.
+- [Code Conventions](https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/code-conventions.md) - Rules and conventions for writing code in OpenIM.
 - [Development Guide](https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/development.md) - A guide on how to carry out development within OpenIM.
-- [Git Cherry Pick](https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/git_cherry-pick.md) - Guidelines on cherry-picking operations.
-- [Git Workflow](https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/git_workflow.md) - The git workflow in OpenIM.
-- [Initialization Configurations](https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/init_config.md) - Guidance on setting up and initializing OpenIM.
-- [Docker Installation](https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/install_docker.md) - How to install Docker on your machine.
-- [Linux Development Environment](https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/linux_development.md) - Guide to set up the development environment on Linux.
-- [Local Actions](https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/local_actions.md) - Guidelines on how to carry out certain common actions locally.
+- [Git Cherry Pick](https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/gitcherry-pick.md) - Guidelines on cherry-picking operations.
+- [Git Workflow](https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/git-workflow.md) - The git workflow in OpenIM.
+- [Initialization Configurations](https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/init-config.md) - Guidance on setting up and initializing OpenIM.
+- [Docker Installation](https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/install-docker.md) - How to install Docker on your machine.
+- [Linux Development Environment](https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/linux-development.md) - Guide to set up the development environment on Linux.
+- [Local Actions](https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/local-actions.md) - Guidelines on how to carry out certain common actions locally.
 - [Offline Deployment](https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/offline-deployment.md) - Methods of deploying OpenIM offline.
-- [Protoc Tools](https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/protoc_tools.md) - Guide on using protoc tools.
-- [Go Tools](https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/util_go.md) - Tools and libraries in OpenIM for Go.
-- [Makefile Tools](https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/util_makefile.md) - Best practices and tools for Makefile.
-- [Script Tools](https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/util_scripts.md) - Best practices and tools for scripts.
+- [Protoc Tools](https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/protoc-tools.md) - Guide on using protoc tools.
+- [Go Tools](https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/util-go.md) - Tools and libraries in OpenIM for Go.
+- [Makefile Tools](https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/util-makefile.md) - Best practices and tools for Makefile.
+- [Script Tools](https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/util-scripts.md) - Best practices and tools for scripts.
 
 ## Conversions
 
 This section introduces various conventions and policies within OpenIM, encompassing code, logs, versions, and more.
 
-- [API Conversions](https://github.com/openimsdk/open-im-server/blob/main/docs/conversions/api.md) - Guidelines and methods for API conversions.
-- [Logging Policy](https://github.com/openimsdk/open-im-server/blob/main/docs/conversions/bash_log.md) - Logging policies and conventions in OpenIM.
-- [CI/CD Actions](https://github.com/openimsdk/open-im-server/blob/main/docs/conversions/cicd_actions.md) - Procedures and conventions for CI/CD.
-- [Commit Conventions](https://github.com/openimsdk/open-im-server/blob/main/docs/conversions/commit.md) - Conventions for code commits in OpenIM.
-- [Directory Conventions](https://github.com/openimsdk/open-im-server/blob/main/docs/conversions/directory.md) - Directory structure and conventions within OpenIM.
-- [Error Codes](https://github.com/openimsdk/open-im-server/blob/main/docs/conversions/error_code.md) - List and descriptions of error codes.
-- [Go Code Conversions](https://github.com/openimsdk/open-im-server/blob/main/docs/conversions/go_code.md) - Conventions and conversions for Go code.
-- [Docker Image Strategy](https://github.com/openimsdk/open-im-server/blob/main/docs/conversions/images.md) - Management strategies for OpenIM Docker images, spanning multiple architectures and image repositories.
-- [Logging Conventions](https://github.com/openimsdk/open-im-server/blob/main/docs/conversions/logging.md) - Further detailed conventions on logging.
-- [Version Conventions](https://github.com/openimsdk/open-im-server/blob/main/docs/conversions/version.md) - Naming and management strategies for OpenIM versions.
+- [API Conversions](https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/api.md) - Guidelines and methods for API conversions.
+- [Logging Policy](https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/bash-log.md) - Logging policies and conventions in OpenIM.
+- [CI/CD Actions](https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/cicd-actions.md) - Procedures and conventions for CI/CD.
+- [Commit Conventions](https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/commit.md) - Conventions for code commits in OpenIM.
+- [Directory Conventions](https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/directory.md) - Directory structure and conventions within OpenIM.
+- [Error Codes](https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/error-code.md) - List and descriptions of error codes.
+- [Go Code Conversions](https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/go-code.md) - Conventions and conversions for Go code.
+- [Docker Image Strategy](https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/images.md) - Management strategies for OpenIM Docker images, spanning multiple architectures and image repositories.
+- [Logging Conventions](https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/logging.md) - Further detailed conventions on logging.
+- [Version Conventions](https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/version.md) - Naming and management strategies for OpenIM versions.
 
 
 ## For Developers, Contributors, and Community Maintainers
@@ -49,7 +49,7 @@ This section introduces various conventions and policies within OpenIM, encompas
 
 If you're a developer or someone keen on contributing:
 
-- Familiarize yourself with our [Code Conventions](https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/code_conventions.md) and [Git Workflow](https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/git_workflow.md) to ensure smooth contributions.
+- Familiarize yourself with our [Code Conventions](https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/code-conventions.md) and [Git Workflow](https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/git-workflow.md) to ensure smooth contributions.
 - Dive into the [Development Guide](https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/development.md) to get a hang of the development practices in OpenIM.
 
 ### Community Maintainers
@@ -57,11 +57,11 @@ If you're a developer or someone keen on contributing:
 As a community maintainer:
 
 - Ensure that contributions align with the standards outlined in our documentation.
-- Regularly review the [Logging Policy](https://github.com/openimsdk/open-im-server/blob/main/docs/conversions/bash_log.md) and [Error Codes](https://github.com/openimsdk/open-im-server/blob/main/docs/conversions/error_code.md) to stay updated.
+- Regularly review the [Logging Policy](https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/bash-log.md) and [Error Codes](https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/error-code.md) to stay updated.
 
 ## For Users
 
 Users should pay particular attention to:
 
-- [Docker Installation](https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/install_docker.md) - Necessary if you're planning to use Docker images of OpenIM.
-- [Docker Image Strategy](https://github.com/openimsdk/open-im-server/blob/main/docs/conversions/images.md) - To understand the different images available and how to choose the right one for your architecture.
+- [Docker Installation](https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/install-docker.md) - Necessary if you're planning to use Docker images of OpenIM.
+- [Docker Image Strategy](https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/images.md) - To understand the different images available and how to choose the right one for your architecture.

docs/contrib/README.md

@@ -0,0 +1,42 @@
+# Contrib Documentation Index
+
+## 📚 General Information
+- [📄 README](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/README.md) - General introduction to the contribution documentation.
+- [📑 Development Guide](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/development.md) - Guidelines for setting up a development environment.
+
+## 🛠 Setup and Installation
+- [🌍 Environment Setup](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/environment.md) - Instructions on setting up the development environment.
+- [🐳 Docker Installation Guide](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/install-docker.md) - Steps to install Docker for container management.
+- [🔧 OpenIM Linux System Installation](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/install-openim-linux-system.md) - Guide for installing OpenIM on a Linux system.
+
+## 💻 Development Practices
+- [👨‍💻 Code Conventions](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/code-conventions.md) - Coding standards to follow for consistency.
+- [📐 Directory Structure](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/directory.md) - Explanation of the repository's directory layout.
+- [🔀 Git Workflow](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/git-workflow.md) - The workflow for using Git in this project (note the file extension error).
+- [💾 GitHub Workflow](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/github-workflow.md) - Workflow guidelines for GitHub.
+
+## 🧪 Testing and Deployment
+- [⚙️ CI/CD Actions](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/cicd-actions.md) - Continuous integration and deployment configurations.
+- [🚀 Offline Deployment](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/offline-deployment.md) - How to deploy the application offline.
+
+## 🔧 Utilities and Tools
+- [📦 Protoc Tools](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/protoc-tools.md) - Protobuf compiler-related utilities.
+- [🔨 Utility Go](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/util-go.md) - Go utilities and helper functions.
+- [🛠 Makefile Utilities](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/util-makefile.md) - Makefile scripts for automation.
+- [📜 Script Utilities](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/util-scripts.md) - Utility scripts for development.
+
+## 📋 Standards and Conventions
+- [🚦 Commit Guidelines](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/commit.md) - Standards for writing commit messages.
+- [✅ Testing Guide](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/test.md) - Guidelines and conventions for writing tests.
+- [📈 Versioning](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/version.md) - Version management for the project.
+
+## 🖼 Additional Resources
+- [🌐 API Reference](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/api.md) - Detailed API documentation.
+- [📚 Go Code Standards](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/go-code.md) - Go programming language standards.
+- [🖼 Image Guidelines](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/images.md) - Guidelines for image assets.
+
+## 🐛 Troubleshooting
+- [🔍 Error Code Reference](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/error-code.md) - List of error codes and their meanings.
+- [🐚 Bash Logging](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/bash-log.md) - Logging standards for bash scripts.
+- [📈 Logging Conventions](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/logging.md) - Conventions for application logging.
+- [🛠 Local Actions Guide](https://github.com/openimsdk/open-im-server/tree/main/docs/contrib/local-actions.md) - How to perform local actions for troubleshooting.

docs/contrib/bash-log.md

@@ -11,7 +11,7 @@ OpenIM, an intricate project, requires a robust logging mechanism to diagnose is
 1. **Initialization**: The system begins by determining the verbosity level through the `OPENIM_VERBOSE` variable. If it's not set, a default value of 5 is assigned. This verbosity level dictates the depth of the log details.
 2. **Log File Setup**: Logs are stored in the directory specified by `OPENIM_OUTPUT`. If this variable isn't explicitly set, it defaults to the `_output` directory relative to the script location. Each log file is named based on the date to facilitate easy identification.
 3. **Logging Function**: The `echo_log()` function plays a pivotal role by writing messages to both the console (stdout) and the log file.
-4. **Logging to a file**: The `echo_log()` function writes to the log file by appending the message to the file. It also adds a timestamp to the message. path: `_output/logs/*`, Enable logging by default. Set to false to disable. If you wish to turn off output to log files set `ENABLE_LOGGING=flase`. 
+4. **Logging to a file**: The `echo_log()` function writes to the log file by appending the message to the file. It also adds a timestamp to the message. path: `_output/logs/*`, Enable logging by default. Set to false to disable. If you wish to turn off output to log files set `export ENABLE_LOGGING=flase`. 
 
 ### Key Functions & Their Usages
 

docs/contrib/code-conventions.md

@@ -24,7 +24,48 @@
   - Do not use uppercase characters, underscores, or dashes in package names.
   - Please consider parent directory name when choosing a package name. For example, `pkg/controllers/autoscaler/foo.go` should say `package autoscaler` not `package autoscalercontroller`.
     - Unless there's a good reason, the `package foo` line should match the name of the directory in which the `.go` file exists.
-    - Importers can use a different name if they need to disambiguate.
+    - Importers can use a different name if they need to disambiguate.Ⓜ️
+
+## OpenIM Naming Conventions Guide
+
+Welcome to the OpenIM Naming Conventions Guide. This document outlines the best practices and standardized naming conventions that our project follows to maintain clarity, consistency, and alignment with industry standards, specifically taking cues from the Google Naming Conventions.
+
+### 1. General File Naming
+
+Files within the OpenIM project should adhere to the following rules:
+
++ Both hyphens (`-`) and underscores (`_`) are acceptable in file names.
++ Underscores (`_`) are preferred for general files to enhance readability and compatibility.
++ For example: `data_processor.py`, `user_profile_generator.go`
+
+### 2. Special File Types
+
+#### a. Script and Markdown Files
+
++ Bash scripts and Markdown files should use hyphens (`-`) to facilitate better searchability and compatibility in web browsers.
++ For example: `deploy-script.sh`, `project-overview.md`
+
+#### b. Uppercase Markdown Documentation
+
++ Markdown files with uppercase names, such as `README`, may include underscores (`_`) to separate words if necessary.
++ For example: `README_SETUP.md`, `CONTRIBUTING_GUIDELINES.md`
+
+### 3. Directory Naming
+
++ Directories must use hyphens (`-`) exclusively to maintain a clean and organized file structure.
++ For example: `image-assets`, `user-data`
+
+### 4. Configuration Files
+
++ Configuration files, including but not limited to `.yaml` files, should use hyphens (`-`).
++ For example: `app-config.yaml`, `logging-config.yaml`
+
+### Best Practices
+
++ Keep names concise but descriptive enough to convey the file's purpose or contents at a glance.
++ Avoid using spaces in names; use hyphens or underscores instead to improve compatibility across different operating systems and environments.
++ Stick to lowercase naming where possible for consistency and to prevent issues with case-sensitive systems.
++ Include version numbers or dates in file names if the file is subject to updates, following the format: `project-plan-v1.2.md` or `backup-2023-03-15.sql`.
 
 ## Directory and file conventions
 

docs/contrib/environment.md

@@ -37,6 +37,7 @@
 	* 2.20. [Prometheus Configuration](#PrometheusConfiguration-1)
 		* 2.20.1. [General Configuration](#GeneralConfiguration)
 		* 2.20.2. [Service-Specific Prometheus Ports](#Service-SpecificPrometheusPorts)
+	* 2.21. [Qiniu Cloud Kodo Configuration](#QiniuCloudKODOConfiguration)
 
 ## 0. <a name='TableofContents'></a>OpenIM Config File
 
@@ -136,13 +137,13 @@ For convenience, configuration through modifying environment variables is recomm
   export PASSWORD="openIM123"
   ```
 
-+ USER
++ OPENIM_USER
 
   + **Description**: Username for mysql, mongodb, redis, and minio.
   + **Default**: `root`
 
   ```bash
-  export USER="root"
+  export OPENIM_USER="root"
   ```
 
 + API_URL
@@ -150,7 +151,7 @@ For convenience, configuration through modifying environment variables is recomm
   + **Description**: API address.
   + **Note**: If the server has an external IP, it will be automatically obtained. For internal networks, set this variable to the IP serving internally.
 
-  ```
+  ```bash
   export API_URL="http://ip:10002"
   ```
 
@@ -295,19 +296,6 @@ Feel free to explore the MinIO documentation for more advanced configurations an
 | `ZOOKEEPER_USERNAME` | `""`                     | Username for Zookeeper. |
 | `ZOOKEEPER_PASSWORD` | `""`                     | Password for Zookeeper. |
 
-###  2.6. <a name='MySQLConfiguration'></a>MySQL Configuration
-
-**Description**: Configuration for MySQL, including port, address, and credentials.
-
-| Parameter        | Example Value            | Description         |
-| ---------------- | ------------------------ | ------------------- |
-| `MYSQL_PORT`     | `"13306"`                | Port for MySQL.     |
-| `MYSQL_ADDRESS`  | Docker Bridge Gateway IP | Address for MySQL.  |
-| `MYSQL_USERNAME` | User-defined             | Username for MySQL. |
-| `MYSQL_PASSWORD` | User-defined             | Password for MySQL. |
-
-Note: The configurations for other services (e.g., MONGO, REDIS, KAFKA, etc.) follow a similar pattern to MySQL and can be documented in a similar manner.
-
 ###  2.7. <a name='MongoDBConfiguration'></a>MongoDB Configuration
 
 This section involves setting up MongoDB, including its port, address, and credentials.
@@ -412,7 +400,7 @@ Configuration for Grafana, including its port and address.
 
 | Parameter       | Example Value              | Description           |
 | --------------- | -------------------------- | --------------------- |
-| GRAFANA_PORT    | "3000"                     | Port used by Grafana. |
+| GRAFANA_PORT    | "13000"                     | Port used by Grafana. |
 | GRAFANA_ADDRESS | "${DOCKER_BRIDGE_GATEWAY}" | Address for Grafana.  |
 
 ###  2.16. <a name='RPCPortConfigurationVariables'></a>RPC Port Configuration Variables
@@ -466,7 +454,7 @@ This section involves configuring the log settings, including storage location,
 This section involves setting up additional configuration variables for Websocket, Push Notifications, and Chat.
 
 | Parameter               | Example Value     | Description                        |
-| ----------------------- | ----------------- | ---------------------------------- |
+|-------------------------|-------------------|------------------------------------|
 | WEBSOCKET_MAX_CONN_NUM  | "100000"          | Maximum Websocket connections      |
 | WEBSOCKET_MAX_MSG_LEN   | "4096"            | Maximum Websocket message length   |
 | WEBSOCKET_TIMEOUT       | "10"              | Websocket timeout                  |
@@ -500,9 +488,9 @@ This section involves setting up additional configuration variables for Websocke
 | TOKEN_EXPIRE            | "90"              | Token Expiry Time                  |
 | FRIEND_VERIFY           | "false"           | Friend Verification Enable         |
 | IOS_PUSH_SOUND          | "xxx"             | iOS                                |
-
-
-
+| CALLBACK_ENABLE         | "false"            | Enable callback                    | 
+| CALLBACK_TIMEOUT        | "5"               | Maximum timeout for callback call  |
+| CALLBACK_FAILED_CONTINUE| "true"            | fails to continue to the next step |
 ###  2.20. <a name='PrometheusConfiguration-1'></a>Prometheus Configuration
 
 This section involves configuring Prometheus, including enabling/disabling it and setting up ports for various services.
@@ -528,3 +516,18 @@ This section involves configuring Prometheus, including enabling/disabling it an
 | RTC Service              | `RTC_PROM_PORT`          | '21300'                      | Prometheus port for the RTC service.               |
 | Third Service            | `THIRD_PROM_PORT`        | '21301'                      | Prometheus port for the Third service.             |
 | Message Transfer Service | `MSG_TRANSFER_PROM_PORT` | '21400, 21401, 21402, 21403' | Prometheus ports for the Message Transfer service. |
+
+
+###  2.21. <a name='QiniuCloudKODOConfiguration'></a>Qiniu Cloud Kodo Configuration
+
+This section involves setting up Qiniu Cloud Kodo, including its endpoint, bucket name, and credentials.
+
+| Parameter             | Example Value                                                | Description                              |
+| --------------------- | ------------------------------------------------------------ | ---------------------------------------- |
+| KODO_ENDPOINT          | "[http://s3.cn-east-1.qiniucs.com](http://s3.cn-east-1.qiniucs.com)" | Endpoint URL for Qiniu Cloud Kodo.      |
+| KODO_BUCKET            | "demo-9999999"                                               | Bucket name for Qiniu Cloud Kodo.       |
+| KODO_BUCKET_URL        | "[http://your.domain.com](http://your.domain.com)" | Bucket URL for Qiniu Cloud Kodo.        |
+| KODO_ACCESS_KEY_ID     | [User Defined]                                               | Access key ID for Qiniu Cloud Kodo.     |
+| KODO_ACCESS_KEY_SECRET | [User Defined]                                               | Access key secret for Qiniu Cloud Kodo. |
+| KODO_SESSION_TOKEN     | [User Defined]                                               | Session token for Qiniu Cloud Kodo.     |
+| KODO_PUBLIC_READ       | "false"                                                      | Public read access.                      |

docs/contrib/github-workflow.md

@@ -83,7 +83,7 @@ You may now edit files on the `myfeature` branch.
 
 ### Building open-im-server
 
-This workflow is process-specific. For quick-start build instructions for [openimsdk/open-im-server](https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/util_makefile.md)
+This workflow is process-specific. For quick-start build instructions for [openimsdk/open-im-server](https://github.com/openimsdk/open-im-server/blob/main/docs/contrib/util-makefile.md)
 
 ## 4. Keep your branch in sync
 

docs/contrib/go-code.md

@@ -312,6 +312,18 @@ The naming convention is a very important part of the code specification. A unif
 - The function name is in camel case, and the first letter is uppercase or lowercase according to the access control decision,For example: `MixedCaps` or `mixedCaps`.
 - Code automatically generated by code generation tools (such as `xxxx.pb.go`) and underscores used to group related test cases (such as `TestMyFunction_WhatIsBeingTested`) exclude this rule.
 
+In accordance with the naming conventions adopted by OpenIM and drawing reference from the Google Naming Conventions as per the guidelines available at https://google.github.io/styleguide/go/, the following expectations for naming practices within the project are set forth:
+
+1. **File Names:**
+   + Both hyphens (`-`) and underscores (`_`) are permitted when naming files.
+   + A preference is established for the use of underscores (`_`), suggesting it as the best practice in general scenarios.
+2. **Script and Markdown Files:**
+   + For shell scripts (bash files) and Markdown (`.md`) documents, the use of hyphens (`-`) is recommended.
+   + This recommendation is based on the improved searchability and compatibility in web browsers when hyphens are used in names.
+3. **Directories:**
+   + A consistent approach is mandated for naming directories, exclusively using hyphens (`-`) to separate words within directory names.
+
+
 ### 2.3 File Naming
 
 - Keep the filename short and meaningful.