feat: add more test project

Signed-off-by: Xinwei Xiong(cubxxw-openim) <3293172751nss@gmail.com>

.docker-compose_cfg/config.yaml

@@ -1,3 +1,17 @@
+# Copyright © 2023 OpenIM. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
 #---------------Infrastructure configuration---------------------#
 etcd:
   etcdSchema: openim  #默认即可

.docker-compose_cfg/datasource-compose.yaml

@@ -1,3 +1,17 @@
+# Copyright © 2023 OpenIM. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
 #more datasource-compose.yaml 
 apiVersion: 1
 

.docker-compose_cfg/grafana.ini

@@ -633,7 +633,7 @@ active_sync_enabled = true
 #################################### AWS ###########################
 [aws]
 # Enter a comma-separated list of allowed AWS authentication providers.
-# Options are: default (AWS SDK Default), keys (Access && secret key), credentials (Credentials field), ec2_iam_role (EC2 IAM Role)
+# Options are: default (AWS SDK Default), keys (Access && secret key), credentials (Credentials field), ec2_iam_role (EC2 OpenIM Role)
 allowed_auth_providers = default,keys,credentials
 
 # Allow AWS users to assume a role using temporary security credentials.

.docker-compose_cfg/prometheus-compose.yml

@@ -1,3 +1,17 @@
+# Copyright © 2023 OpenIM. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
 #more prometheus-compose.yml 
 global:
   scrape_interval:     15s 

.dockerignore

@@ -0,0 +1,31 @@
+<!-- # Ignore files and directories starting with a dot
+
+# Ignore specific files
+.dockerignore
+
+# Ignore build artifacts
+_output/
+logs/
+
+# Ignore non-essential documentation
+README.md
+README-zh_CN.md
+CONTRIBUTING.md
+CHANGELOG/
+# LICENSE
+
+# Ignore testing and linting configuration
+.golangci.yml
+
+# Ignore deployment-related files
+docker-compose.yaml
+deployments/
+
+# Ignore assets
+assets/
+
+# Ignore components
+components/
+
+# Ignore tools and scripts
+.github/ -->

.env

@@ -1,4 +1,19 @@
+# Copyright © 2023 OpenIM. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
 USER=root
 PASSWORD=openIM123
 MINIO_ENDPOINT=http://127.0.0.1:10005
-DATA_DIR=./
+API_URL=http://14.153.17.42:10002
+DATA_DIR=/root/workspaces/openim/openim-server

.github/.codecov.yml

@@ -1,3 +1,17 @@
+# Copyright © 2023 OpenIM. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
 coverage:
   status:
     project:

.github/dependabot.yml

@@ -0,0 +1,59 @@
+# Copyright © 2023 OpenIM. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# To get started with Dependabot version updates, you'll need to specify which
+# package ecosystems to update and where the package manifests are located.
+# Please see the documentation for all configuration options:
+# https://docs.github.com/github/administering-a-repository/configuration-options-for-dependency-updates
+
+version: 2
+updates:
+  - package-ecosystem: "gomod"
+    directory: "/"
+    schedule:
+      interval: "daily"
+      time: "08:00"
+    labels:
+      - "dependencies"
+    commit-message:
+      prefix: "feat"
+      include: "scope"
+    groups:
+      gomod-deps:
+        patterns:
+          - "*"
+  - package-ecosystem: "github-actions"
+    directory: "/"
+    schedule:
+      interval: "daily"
+      time: "08:00"
+    labels:
+      - "dependencies"
+    commit-message:
+      prefix: "chore"
+      include: "scope"
+    groups:
+      github-actions:
+        patterns:
+          - "*"
+  - package-ecosystem: "docker"
+    directory: "/"
+    schedule:
+      interval: "daily"
+      time: "08:00"
+    labels:
+      - "dependencies"
+    commit-message:
+      prefix: "feat"
+      include: "scope"

.github/labels.yml

@@ -1,3 +1,17 @@
+# Copyright © 2023 OpenIM. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
 # Refer to Kubernetes for size/* Settings
 # https://github.com/Kubernetes/Kubernetes
 XS:

.github/release-drafter.yml

@@ -0,0 +1,51 @@
+# Copyright © 2023 OpenIM. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+name-template: 'v$RESOLVED_VERSION 🌈'
+tag-template: 'v$RESOLVED_VERSION'
+categories:
+  - title: '🚀 Features'
+    labels:
+      - 'feature'
+      - 'enhancement'
+  - title: '🐛 Bug Fixes'
+    labels:
+      - 'kind/fix'
+      - 'kind/feature'
+      - 'enhancement'
+      - 'kind/documentation'
+      - 'good first issue'
+  - title: '🧰 Maintenance'
+    label: 'chore'
+change-template: '- $TITLE @$AUTHOR (#$NUMBER)'
+change-title-escapes: '\<*_&' # You can add # and @ to disable mentions, and add ` to disable code blocks.
+version-resolver:
+  major:
+    labels:
+      - 'major'
+  minor:
+    labels:
+      - 'minor'
+  patch:
+    labels:
+      - 'patch'
+  default: patch
+template: |
+  ## Changes $PREVIOUS_TAG
+
+  $CHANGES
+
+  ## Contributors to this $REPOSITORY	release
+
+  $CONTRIBUTORS	

.github/sync-release.yml

@@ -0,0 +1,16 @@
+OpenIMSDK/openim-docker:
+  - source: ./config
+    dest: ./openim-server/release/config
+    replace: true
+  - source: ./docs
+    dest: ./openim-server/release/docs
+    replace: true
+  - source: ./scripts
+    dest: ./openim-server/release/scripts
+    replace: true
+  - source: ./scripts
+    dest: ./scripts
+    replace: false
+  - source: ./Makefile
+    dest: ./Makefile
+    replace: false

.github/sync.yml

@@ -1,3 +1,17 @@
+# Copyright © 2023 OpenIM. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
 # https://github.com/BetaHuhn/repo-file-sync-action
 # Synchronization for the.github repository
 OpenIMSDK/.github:
@@ -28,6 +42,9 @@ OpenIMSDK/openim-sdk-core:
   - source: .github/workflows/stale.yml
     dest: .github/workflows/stale.yml
     replace: false
+  - source: .github/.codecov.yml
+    dest: .github/.codecov.yml
+    replace: false
 
 OpenIMSDK/OpenIM-Docs:
   - source: .github/workflows/
@@ -38,6 +55,9 @@ OpenIMSDK/OpenIM-Docs:
   - source: scripts/githooks/
     dest: scripts/githooks/
     replace: true
+  - source: .github/.codecov.yml
+    dest: .github/.codecov.yml
+    replace: false
 
 OpenIMSDK/OpenKF:
   - source: LICENSE
@@ -51,6 +71,26 @@ OpenIMSDK/OpenKF:
   - source: .github/workflows/stale.yml
     dest: .github/workflows/stale.yml
     replace: false
+  - source: .github/.codecov.yml
+    dest: .github/.codecov.yml
+    replace: false
+
+OpenIMSDK/openim-docker:
+  - source: ./config
+    dest: ./openim-server/main/config
+    replace: true
+  - source: ./docs
+    dest: ./openim-server/main/docs
+    replace: true
+  - source: ./scripts
+    dest: ./openim-server/main/scripts
+    replace: true
+  - source: ./scripts
+    dest: ./scripts
+    replace: true
+  - source: ./Makefile
+    dest: ./Makefile
+    replace: true
 
 group:
   # first group：common to all warehouses
@@ -58,8 +98,12 @@ group:
   - repos: |
       OpenIMSDK/OpenKF@main
       OpenIMSDK/openim-miniprogram-demo@main
+      OpenIMSDK/docs
+      OpenIMSDK/chat
+      OpenIMSDK/community
+      OpenIMSDK/openim-charts
       OpenIMSDK/openim-sdk-cpp@main
-    files: 
+    files:
       - source: LICENSE
         dest: LICENSE
         replace: false
@@ -71,10 +115,22 @@ group:
         replace: false
       - source: .github/workflows/project-progress.yml
         dest: .github/workflows/project-progress.yml
-        replace: false
+        replace: false 
       - source: .github/workflows/help-comment-issue.yml
         dest: .github/workflows/help-comment-issue.yml
         replace: false
+      - source: .github/.codecov.yml
+        dest: .github/.codecov.yml
+        replace: false
+      - source: .github/workflows/cla.yml
+        dest: .github/workflows/cla.yml
+        replace: false
+      - source: .github/workflows/auto-assign-issue.yml
+        dest: .github/workflows/auto-assign-issue.yml
+        replace: false
+      - source: .github/workflows/release.yml
+        dest: .github/workflows/release.yml
+        replace: false
       - source: ./scripts/githooks/
         dest: ./scripts/githooks/
-        replace: true
+        replace: true

.github/weekly-digest.yml

@@ -0,0 +1,21 @@
+# Copyright © 2023 OpenIM. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# https://github.com/apps/weekly-digest/installations/new
+publishDay: sun
+canPublishIssues: true
+canPublishPullRequests: true
+canPublishContributors: true
+canPublishStargazers: true
+canPublishCommits: true

.github/workflows/auto-assign-issue.yml

@@ -0,0 +1,43 @@
+# Copyright © 2023 OpenIM open source community. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+name: Assign issue to comment author
+on:
+  issue_comment:
+    types: [created]
+jobs:
+  assign-issue:
+    if: |
+      contains(github.event.comment.body, '/assign') || contains(github.event.comment.body, '/accept') &&
+      !contains(github.event.comment.user.login, 'openimbot') &&
+      !contains(github.event.comment.user.login, 'kubbot')
+    runs-on: ubuntu-latest
+    permissions:
+      issues: write
+    steps:
+      - name: Checkout code
+        uses: actions/checkout@v3
+
+      - name: Assign the issue
+        run: |
+          export LETASE_MILESTONES=$(curl 'https://api.github.com/repos/$OWNER/$PEPO/milestones' | jq -r 'last(.[]).title')
+          gh issue edit ${{ github.event.issue.number }} --add-assignee "${{ github.event.comment.user.login }}"
+          gh issue edit ${{ github.event.issue.number }} --add-label "triage/accepted"
+          gh issue edit ${{ github.event.issue.number }} --milestone "$LETASE_MILESTONES"
+          gh issue comment $ISSUE --body "@${{ github.event.comment.user.login }} Glad to see you accepted this issue🤲, this issue has been assigned to you. I set the milestones for this issue to [$LETASE_MILESTONES](https://github.com/$OWNER/$PEPO/milestones), We are looking forward to your PR!"
+        env:
+          GH_TOKEN: ${{ secrets.REDBOT_GITHUB_TOKEN }}
+          ISSUE: ${{ github.event.issue.html_url }}
+          OWNER: ${{ github.repository_owner }}
+          REPO: ${{ github.event.repository.name }}

.github/workflows/auto-gh-pr.yml

@@ -0,0 +1,61 @@
+# Copyright © 2023 OpenIM open source community. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+name: Auto PR to release
+
+on:
+  pull_request:
+    # types:
+    #   - closed
+  issue_comment:
+    types: [created]
+  pull_request_review_comment:
+    types: [created]
+
+jobs:
+  create-pr:
+    runs-on: ubuntu-latest
+    if: github.event.pull_request.base.ref == 'main'
+    # && github.event.pull_request.merged == true
+    steps:
+        - name: Check out code
+          uses: actions/checkout@v3
+          with:
+            fetch-depth: 0
+
+        - name: Create PR to release branch
+          run: |
+            ISSUEID=$(gh pr view ${{ github.event.pull_request.number }} --repo $OWNER/$REPO | grep -oP 'Fixes #\K\d+')
+            echo "===========> $ISSUEID"
+            ISSUE=$(gh issue view $ISSUEID --repo $OWNER/$REPO --json labels,assignees,milestone,title)
+            echo "===========> $ISSUE"
+
+            LABELS=$(echo $ISSUE | jq -r '.labels[] | select(.name) | .name' | jq -R -r -s -c 'split("\n")[:-1] | join(",")')
+            ASSIGNEES=$(echo $ISSUE | jq -r '.assignees[] | select(.login) | .login' | jq -R -s -c 'split("\n")[:-1] | join(",")')
+            MILESTONE=$(echo $ISSUE | jq -r '.milestone | select(.title) | .title')
+            TITLE=$(echo $ISSUE | jq -r '.title')
+
+            gh pr edit ${{ github.event.pull_request.number }} --repo $OWNER/$REPO --add-label "$LABELS" --add-assignee "$ASSIGNEES" --milestone "$MILESTONE"
+
+            # git checkout -b bot/merge-to-release-$ISSUEID
+            # git push origin bot/merge-to-release-$ISSUEID
+            # gh pr create --base release --head bot/merge-to-release-$ISSUEID --title "Merge main to release" --body ""
+            # gh pr create --base main --head feat/auto-release-pr-624  --title "The bug is fixed" --body "$x" --repo OpenIMSDK/Open-IM-Server --reviewer "cubxxw"
+          continue-on-error: true
+          env:
+              GITHUB_TOKEN: ${{ secrets.BOT_GITHUB_TOKEN }}
+              GH_TOKEN: ${{ github.token }}
+              ISSUE: ${{ github.event.issue.html_url }}
+              OWNER: ${{ github.repository_owner }}
+              REPO: ${{ github.event.repository.name }}

.github/workflows/auto-invite.yml

@@ -1,3 +1,17 @@
+# Copyright © 2023 OpenIM open source community. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
 name: Invite users to join our group
 on:
   issue_comment:
@@ -13,7 +27,7 @@ jobs:
     steps:
 
       - name: Invite user to join our group
-        uses: peter-evans/create-or-update-comment@v1
+        uses: peter-evans/create-or-update-comment@v3
         with:
           token: ${{ secrets.BOT_GITHUB_TOKEN }}
           issue-number: ${{ github.event.issue.number }}

.github/workflows/auto-tag.yml

@@ -0,0 +1,52 @@
+# Copyright © 2023 OpenIM. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+name: Create Tag
+
+on:
+  issue_comment:
+    types: [created]
+  pull_request_review_comment:
+    types: [created]
+
+jobs:
+  create_tag:
+    runs-on: ubuntu-latest
+    if: startsWith(github.event.comment.body, '/create tag')
+    steps:
+      - name: Checkout code
+        uses: actions/checkout@v3
+
+      - name: Validate version number and get comment
+        id: validate
+        run: |
+          COMMENT="${{ github.event.comment.body }}"
+          VERSION=$(echo $COMMENT | cut -d ' ' -f 3)
+          TAG_COMMENT=$(echo $COMMENT | cut -d '"' -f 2)
+          if [[ $VERSION =~ ^v([0-9]+\.){2}[0-9]+$ ]]; then
+            echo "version=$VERSION" >> $GITHUB_STATE
+            echo "tag_comment=$TAG_COMMENT" >> $GITHUB_STATE
+          else
+            echo "Invalid version number."
+            exit 1
+          fi
+
+      - name: Create a new tag
+        env:
+          GH_TOKEN: ${{ secrets.BOT_GITHUB_TOKEN }}
+        run: |
+          source $GITHUB_STATE
+          git tag -a $VERSION -m "$tag_comment"
+          git push origin $VERSION
+          echo "tag_created=$VERSION" >> $GITHUB_OUTPUT

.github/workflows/bot-auto-cherry-pick.yml

@@ -0,0 +1,67 @@
+# Copyright © 2023 OpenIM. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+name: 'Github Rebot for Cherry Pick when PR is merged'
+on:
+  pull_request_target:
+    types:
+      - closed
+
+jobs:
+  comment:
+    runs-on: ubuntu-latest
+    steps:
+      - name: Comment cherry-pick command
+        uses: actions/github-script@v6
+        with:
+          script: |
+            const pr = context.payload.pull_request;
+            if (!pr.merged) {
+              console.log("PR is not merged. Skipping...");
+              return;
+            }
+            if (!pr.milestone || !pr.milestone.title) {
+              console.log("Milestone is not set. Skipping...");
+              return;
+            }
+            const milestone = pr.milestone.title;
+            const ref = `heads/release-${milestone}`;
+            let branchExists;
+            try {
+              await github.rest.git.getRef({
+                owner: context.repo.owner,
+                repo: context.repo.repo,
+                ref: ref
+              });
+              branchExists = true;
+            } catch (error) {
+              if (error.status === 404) {
+                console.log(`Branch ${ref} does not exist. Skipping...`);
+                branchExists = false;
+              } else {
+                throw error; // Rethrow if it's another error
+              }
+            }
+            if (!branchExists) {
+              return;
+            }
+            const cherryPickCmd = `/cherry-pick release-${milestone}`;
+            console.log(`Adding comment: ${cherryPickCmd}`);
+            await github.rest.issues.createComment({
+              owner: context.repo.owner,
+              repo: context.repo.repo,
+              issue_number: pr.number,
+              body: cherryPickCmd
+            });
+          github-token: ${{ secrets.BOT_GITHUB_TOKEN }}

.github/workflows/bot-cherry-pick.yml

@@ -0,0 +1,33 @@
+# Copyright © 2023 OpenIM open source community. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+name: Github Rebot for Cherry Pick On Comment
+on:
+  issue_comment:
+    types: [created]
+jobs:
+  cherry-pick:
+    name: Cherry Pick
+    if: github.event.issue.pull_request != '' && contains(github.event.comment.body, '/cherry-pick') && github.event.comment.user.login=='kubbot'
+    runs-on: ubuntu-latest
+    steps:
+      - name: Checkout the latest code
+        uses: actions/checkout@v3
+        with:
+          token: ${{ secrets.BOT_GITHUB_TOKEN }}
+          fetch-depth: 0 # otherwise, you will fail to push refs to dest repo
+      - name: Automatic Cherry Pick
+        uses: vendoo/gha-cherry-pick@v1
+        env:
+          GITHUB_TOKEN: ${{ secrets.BOT_GITHUB_TOKEN }}

.github/workflows/build-docker-image.yml

@@ -0,0 +1,137 @@
+# Copyright © 2023 OpenIM open source community. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+name: Publish Docker image
+
+on:
+  push:
+    branches:
+      - main
+      - release-*
+    tags:
+      - v*
+  workflow_dispatch:
+
+env:
+  # Common versions
+  GO_VERSION: "1.20"
+
+jobs:
+  build-dockerhub:
+    runs-on: ubuntu-latest
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v3
+      - name: Set up QEMU
+        uses: docker/setup-qemu-action@v2
+      - name: Set up Docker Buildx
+        uses: docker/setup-buildx-action@v2
+
+# docker.io/openim/openim-server:latest
+      - name: Extract metadata (tags, labels) for Docker
+        id: meta
+        uses: docker/metadata-action@v4.6.0
+        with:
+          images: openim/openim-server
+          # generate Docker tags based on the following events/attributes
+          tags: |
+            type=schedule
+            type=ref,event=branch
+            type=ref,event=pr
+            type=semver,pattern={{version}}
+            type=semver,pattern={{major}}.{{minor}}
+            type=semver,pattern={{major}}
+            type=sha
+
+      - name: Log in to Docker Hub
+        uses: docker/login-action@v2
+        with:
+          username: ${{ secrets.DOCKER_USERNAME }}
+          password: ${{ secrets.DOCKER_PASSWORD }}
+
+      - name: Build and push Docker image
+        uses: docker/build-push-action@v4
+        with:
+          context: .
+          # linux/ppc64le,linux/s390x
+          platforms: linux/amd64,linux/arm64
+          push: ${{ github.event_name != 'pull_request' }}
+          tags: ${{ steps.meta.outputs.tags }}
+          labels: ${{ steps.meta.outputs.labels }}
+
+  build-aliyun:
+    runs-on: ubuntu-latest
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v3
+      - name: Set up QEMU
+        uses: docker/setup-qemu-action@v2
+      - name: Set up Docker Buildx
+        uses: docker/setup-buildx-action@v2
+# registry.cn-hangzhou.aliyuncs.com/openimsdk/openim-server:latest
+      - name: Extract metadata (tags, labels) for Docker
+        id: meta2
+        uses: docker/metadata-action@v4.6.0
+        with:
+          images: registry.cn-hangzhou.aliyuncs.com/openimsdk/openim-server
+
+      - name: Log in to AliYun Docker Hub
+        uses: docker/login-action@v2
+        with:
+          registry: registry.cn-hangzhou.aliyuncs.com
+          username: ${{ secrets.ALIREGISTRY_USERNAME }}
+          password: ${{ secrets.ALIREGISTRY_TOKEN }}
+      
+      - name: Build and push Docker image
+        uses: docker/build-push-action@v4
+        with:
+          context: .
+          # linux/ppc64le,linux/s390x
+          platforms: linux/amd64,linux/arm64
+          push: ${{ github.event_name != 'pull_request' }}
+          tags: ${{ steps.meta2.outputs.tags }}
+          labels: ${{ steps.meta2.outputs.labels }}
+
+  build-ghcr:
+    runs-on: ubuntu-latest
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v3
+      - name: Set up QEMU
+        uses: docker/setup-qemu-action@v2
+      - name: Set up Docker Buildx
+        uses: docker/setup-buildx-action@v2
+# ghcr.io/openimsdk/openim-server:latest
+      - name: Extract metadata (tags, labels) for Docker
+        id: meta3
+        uses: docker/metadata-action@v4.6.0
+        with:
+          images: ghcr.io/openimsdk/openim-server
+
+      - name: Log in to GitHub Container Registry
+        uses: docker/login-action@v2
+        with:
+          registry: ghcr.io
+          username: ${{ github.repository_owner }}
+          password: ${{ secrets.GITHUB_TOKEN }}
+
+      - name: Build and push Docker image
+        uses: docker/build-push-action@v4
+        with:
+          context: .
+          # linux/ppc64le,linux/s390x
+          platforms: linux/amd64,linux/arm64
+          push: ${{ github.event_name != 'pull_request' }}
+          tags: ${{ steps.meta3.outputs.tags }}
+          labels: ${{ steps.meta3.outputs.labels }}

.github/workflows/check-coverage.yml

@@ -1,45 +1,59 @@
-# name: Check-Coverage
+# Copyright © 2023 OpenIM open source community. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
 
-# on:
-#   workflow_dispatch:
-#   push:
-#     branches: [ "main" ]
-#     paths-ignore:
-#       - "docs/**"
-#       - "**/*.md"
-#       - "**/*.yaml"
-#       - "CONTRIBUTORS"
-#       - "CHANGELOG/**"
-#   pull_request:
-#     branches: [ "*" ]
-#     paths-ignore:
-#       - "docs/**"
-#       - "**/*.md"
-#       - "**/*.yaml"
-#       - "CONTRIBUTORS"
-#       - "CHANGELOG/**"
-# env:
-#   # Common versions
-#   GO_VERSION: "1.20"
+name: Check-Coverage
 
-# jobs:
-#   coverage:
-#     runs-on: ubuntu-20.04
-#     steps:
-#       - name: Checkout
-#         uses: actions/checkout@v3
+on:
+  workflow_dispatch:
+  push:
+    branches: [ "main" ]
+    paths-ignore:
+      - "docs/**"
+      - "**/*.md"
+      - "**/*.yaml"
+      - "CONTRIBUTORS"
+      - "CHANGELOG/**"
+  pull_request:
+    branches: [ "*" ]
+    paths-ignore:
+      - "docs/**"
+      - "**/*.md"
+      - "**/*.yaml"
+      - "CONTRIBUTORS"
+      - "CHANGELOG/**"
+env:
+  # Common versions
+  GO_VERSION: "1.20"
 
-#       - name: Setup Golang with cache
-#         uses: magnetikonline/action-golang-cache@v3
-#         with:
-#           go-version: ${{ env.GO_VERSION }}
-#           token: ${{ secrets.BOT_GITHUB_TOKEN }}
+jobs:
+  coverage:
+    runs-on: ubuntu-20.04
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v3
 
-#       - name: Install Dependencies
-#         run: sudo apt update && sudo apt install -y libgpgme-dev libbtrfs-dev libdevmapper-dev
+      - name: Setup Golang with cache
+        uses: magnetikonline/action-golang-cache@v4
+        with:
+          go-version: ${{ env.GO_VERSION }}
 
-#       - name: Run Cover
-#         run: make cover
+      - name: Install Dependencies
+        run: sudo apt update && sudo apt install -y libgpgme-dev libbtrfs-dev libdevmapper-dev
 
-#       - name: Upload Coverage to Codecov
-#         uses: codecov/codecov-action@v3
+      - name: Run Cover
+        run: make cover
+        continue-on-error: true
+
+      - name: Upload Coverage to Codecov
+        uses: codecov/codecov-action@v3

.github/workflows/cla.yml

@@ -0,0 +1,62 @@
+# Copyright © 2023 OpenIM open source community. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+name: "OpenIM CLA Assistant"
+on:
+  issue_comment:
+    types: [created]
+  pull_request_target:
+    types: [opened,closed,synchronize]
+
+# explicitly configure permissions, in case your GITHUB_TOKEN workflow permissions are set to read-only in repository settings
+permissions:
+  actions: write
+  contents: write
+  pull-requests: write
+  statuses: write
+
+env:
+  # Define Open-IM-Server variables here
+  OPEN_IM_SERVER_REMOTE_ORGANIZATION: openim-sigs
+  REMOTE_REPOSITORY: cla
+  OPEN_IM_SERVER_CLA_DOCUMENT: https://github.com/openim-sigs/cla/blob/main/README.md
+  OPEN_IM_SERVER_SIGNATURES_PATH: signatures/${{ github.event.repository.name }}/cla.json
+
+  OPEN_IM_SERVER_ALLOWLIST: kubbot,bot* 
+
+jobs:
+  CLAAssistant:
+    runs-on: ubuntu-latest
+    steps:
+      - name: "CLA Assistant"
+        if: (github.event.comment.body == 'recheck' || github.event.comment.body == 'I have read the CLA Document and I hereby sign the CLA') || github.event_name == 'pull_request_target'
+        uses: contributor-assistant/github-action@v2.3.0
+        env:
+          GITHUB_TOKEN: ${{ secrets.BOT_GITHUB_TOKEN }}
+          PERSONAL_ACCESS_TOKEN: ${{ secrets.REDBOT_GITHUB_TOKEN }}
+        with:
+          path-to-signatures: ${{ env.OPEN_IM_SERVER_SIGNATURES_PATH }}
+          path-to-document: ${{ env.OPEN_IM_SERVER_CLA_DOCUMENT }}
+          branch: 'main'
+          allowlist: ${{ env.OPEN_IM_SERVER_ALLOWLIST }}
+
+          remote-organization-name: ${{ env.OPEN_IM_SERVER_REMOTE_ORGANIZATION }}
+          remote-repository-name: ${{ env.REMOTE_REPOSITORY }}
+
+          create-file-commit-message: '📚 Docs: Creating file for storing ${{ github.event.repository.name }} CLA Signatures'
+          custom-notsigned-prcomment: '💕 Thank you for your contribution and please kindly read and sign our [🎯https://github.com/openim-sigs/cla/blob/main/README.md](https://github.com/openim-sigs/cla/blob/main/README.md). <br> If you wish to sign the CRA, **Please copy and comment on the following sentence:**'
+          custom-pr-sign-comment: 'I have read the CLA Document and I hereby sign the CLA'
+          custom-allsigned-prcomment: '🤖 All Contributors have signed the [${{ github.event.repository.name }} CLA](https://github.com/openim-sigs/cla/blob/main/README.md).<br> The signed information is recorded [🤖here](https://github.com/openim-sigs/cla/tree/main/signatures/${{ github.event.repository.name }}/cla.json)'
+        #   lock-pullrequest-aftermerge: false - if you don't want this bot to automatically lock the pull request after merging (default - true)
+        #   use-dco-flag: true - If you are using DCO instead of CLA

.github/workflows/codeql-analysis.yml

@@ -1,71 +1,76 @@
-# For most projects, this workflow file will not need changing; you simply need
-# to commit it to your repository.
+# Copyright © 2023 OpenIM open source community. All rights reserved.
 #
-# You may wish to alter this file to override the set of languages analyzed,
-# or to provide custom queries or build logic.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
 #
-# ******** NOTE ********
-# We have attempted to detect the languages in your repository. Please check
-# the `language` matrix defined below to confirm you have the correct set of
-# supported CodeQL languages.
+#     http://www.apache.org/licenses/LICENSE-2.0
 #
-name: "CodeQL"
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+
+name: "OpenIM Code Scanning - Action"
 
 on:
   push:
-    branches: [ main ]
+    branches: [main]
   pull_request:
-    # The branches below must be a subset of the branches above
-    branches: "*"
-#   schedule:
-#     - cron: '23 2 * * 2'
+    branches: [main]
+  schedule:
+    #        ┌───────────── minute (0 - 59)
+    #        │  ┌───────────── hour (0 - 23)
+    #        │  │ ┌───────────── day of the month (1 - 31)
+    #        │  │ │ ┌───────────── month (1 - 12 or JAN-DEC)
+    #        │  │ │ │ ┌───────────── day of the week (0 - 6 or SUN-SAT)
+    #        │  │ │ │ │
+    #        │  │ │ │ │
+    #        │  │ │ │ │
+    #        *  * * * *
+    - cron: '30 1 * * 0'
 
 jobs:
-  analyze:
-    name: Analyze
+  CodeQL-Build:
+    # CodeQL runs on ubuntu-latest, windows-latest, and macos-latest
     runs-on: ubuntu-latest
+
     permissions:
-      actions: read
-      contents: read
+      # required for all workflows
       security-events: write
 
-    strategy:
-      fail-fast: false
-      matrix:
-        language: [ 'go' ]
-        # CodeQL supports [ 'cpp', 'csharp', 'go', 'java', 'javascript', 'python' ]
-        # Learn more:
-        # https://docs.github.com/en/free-pro-team@latest/github/finding-security-vulnerabilities-and-errors-in-your-code/configuring-code-scanning#changing-the-languages-that-are-analyzed
+      # only required for workflows in private repositories
+      actions: write
+      contents: write
 
     steps:
-    - name: Checkout repository
-      uses: actions/checkout@v2
+      - name: Checkout repository
+        uses: actions/checkout@v3
 
-    # Initializes the CodeQL tools for scanning.
-    - name: Initialize CodeQL
-      uses: github/codeql-action/init@v1
-      with:
-        languages: ${{ matrix.language }}
-        # If you wish to specify custom queries, you can do so here or in a config file.
-        # By default, queries listed here will override any specified in a config file.
-        # Prefix the list here with "+" to use these queries and those in the config file.
-        # queries: ./path/to/local/query, your-org/your-repo/queries@main
+      # Initializes the CodeQL tools for scanning.
+      - name: Initialize CodeQL
+        uses: github/codeql-action/init@v2
+        # Override language selection by uncommenting this and choosing your languages
+        with:
+          languages: go
 
-    # Autobuild attempts to build any compiled languages  (C/C++, C#, or Java).
-    # If this step fails, then you should remove it and run the build manually (see below)
-    - name: Autobuild
-      uses: github/codeql-action/autobuild@v1
+      # Autobuild attempts to build any compiled languages (C/C++, C#, Go, or Java).
+      # If this step fails, then you should remove it and run the build manually (see below).
+      - name: Autobuild
+        uses: github/codeql-action/autobuild@v2
 
-    # ℹ️ Command-line programs to run using the OS shell.
-    # 📚 https://git.io/JvXDl
+      # ℹ️ Command-line programs to run using the OS shell.
+      # 📚 See https://docs.github.com/en/actions/using-workflows/workflow-syntax-for-github-actions#jobsjob_idstepsrun
 
-    # ✏️ If the Autobuild fails above, remove it and uncomment the following three lines
-    #    and modify them (or add more) to build your code if your project
-    #    uses a compiled language
+      # ✏️ If the Autobuild fails above, remove it and uncomment the following
+      #    three lines and modify them (or add more) to build your code if your
+      #    project uses a compiled language
 
-    #- run: |
-    #   make bootstrap
-    #   make release
+    #   - run: |
+    #       make bootstrap
+    #       make release
 
-    - name: Perform CodeQL Analysis
-      uses: github/codeql-action/analyze@v1
+      - name: Perform CodeQL Analysis
+        uses: github/codeql-action/analyze@v2

.github/workflows/create_branch_on_tag.yml

@@ -0,0 +1,76 @@
+# Copyright © 2023 OpenIM. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+name: Create Branch on Tag
+
+on:
+  push:
+    tags:
+      - 'v*.*.0'
+
+jobs:
+  create-branch:
+    runs-on: ubuntu-latest
+    steps:
+    - name: Check out code
+      uses: actions/checkout@v3
+      with:
+        fetch-depth: 0
+
+    - name: Set up Git
+      run: |
+        git config --global user.name 'kubbot'
+        git config --global user.email '3293172751yxy@gmail.com'
+
+    - name: Install git-chglog
+      run: make install.git-chglog
+
+    - name: Create Branch
+      run: |
+        TAG_NAME=${GITHUB_REF/refs\/tags\//}
+        IFS='.' read -ra VERSION_PARTS <<< "$TAG_NAME"
+        if [[ "${VERSION_PARTS[2]}" = "0" ]]; then
+          BRANCH_NAME="release-v${VERSION_PARTS[0]}.${VERSION_PARTS[1]}"
+          echo "Creating branch $BRANCH_NAME"
+          git checkout -b "$BRANCH_NAME"
+          git push origin "$BRANCH_NAME"
+        fi
+
+    - name: Push Changes
+      uses: stefanzweifel/git-auto-commit-action@v4
+      with:
+        commit_message: "Auto Commit CHANGELOG"
+        branch: release-v${VERSION_PARTS[0]}.${VERSION_PARTS[1]}
+      env:
+        GITHUB_TOKEN: ${{ secrets.BOT_GITHUB_TOKEN }}
+
+    - name: Create and Push CHANGELOG
+      run: |
+        git checkout main
+        TAG_NAME=${GITHUB_REF/refs\/tags\//}
+        IFS='.' read -ra VERSION_PARTS <<< "$TAG_NAME"
+        if [[ "${VERSION_PARTS[2]}" = "0" ]]; then
+          cd CHANGELOG
+          git-chglog --tag-filter-pattern "v${VERSION_PARTS[0]}.${VERSION_PARTS[1]}.*"  -o "CHANGELOG-${VERSION_PARTS[0]}.${VERSION_PARTS[1]}.md"
+          git add "CHANGELOG-${VERSION_PARTS[0]}.${VERSION_PARTS[1]}.md"
+          git commit -m "Update CHANGELOG for $TAG_NAME"
+        fi
+
+    - name: Push Changes
+      uses: stefanzweifel/git-auto-commit-action@v4
+      with:
+        commit_message: "Auto Commit CHANGELOG"
+        branch: main
+      env:
+        GITHUB_TOKEN: ${{ secrets.BOT_GITHUB_TOKEN }}

.github/workflows/deploy.yml

@@ -0,0 +1,55 @@
+# Copyright © 2023 OpenIM open source community. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+name: OpenIM Deploy for dev
+
+on:
+  push:
+    branches:
+      - 'devops' # Only for the dev branch
+      - 'main'
+    paths:
+      - '.github/workflows/*'
+      # - '__test__/**' # dev No immediate testing is required
+      - 'src/**'
+      - 'Dockerfile'
+      - 'docker-compose.yml'
+      - 'bin/*'
+
+jobs:
+  deploy-dev:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v3
+      - name: executing remote ssh commands using password
+        uses: appleboy/ssh-action@v1.0.0
+        env:
+            OWNER: ${{ github.repository_owner }}
+            REPO: ${{ github.event.repository.name }}
+        with:
+          host: "${{ secrets.SG_M1_HOST }}, ${{ secrets.SG_N1_HOST }}, ${{ secrets.SG_N2_HOST}}"
+          username: ${{ secrets.SG_USERNAME }}
+          password: ${{ secrets.SG_PASSWORD }}
+          port: ${{ secrets.SG_PORT }}
+          envs: OWNER,REPO
+          script_stop: true
+          script: |
+            mkdir -p /test/openim
+            cd /test/openim
+            pwd;ls -al
+            echo "OWNER: $OWNER"
+            echo "REPO: $REPO"
+            git clone -b develop https://github.com/${OWNER}/${REPO}.git; cd ${REPO}
+            docker compose up -d
+        continue-on-error: true

.github/workflows/depsreview.yaml

@@ -0,0 +1,18 @@
+# Copyright © 2023 KubeCub open source community. All rights reserved.
+# Licensed under the MIT License (the "License");
+# you may not use this file except in compliance with the License.
+
+name: Dependency Review
+on: [pull_request]
+
+permissions:
+  contents: read
+
+jobs:
+  dependency-review:
+    runs-on: ubuntu-latest
+    steps:
+      - name: 'Checkout Repository'
+        uses: actions/checkout@v3
+      - name: 'Dependency Review'
+        uses: actions/dependency-review-action@v3

.github/workflows/docker-buildx.yml

@@ -0,0 +1,320 @@
+# Copyright © 2023 OpenIM open source community. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+name: Docker Buildx Images CI
+
+on:
+  schedule:
+  - cron: '30 1 * * *'
+  push:
+    branches:
+      - release-*
+    tags:
+      - v*
+  workflow_dispatch:
+
+jobs:
+  build-ghcr:
+    runs-on: ubuntu-latest
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v3
+        
+      - name: Set up QEMU
+        uses: docker/setup-qemu-action@v2
+        
+      - name: Set up Docker Buildx
+        uses: docker/setup-buildx-action@v2
+        with:
+          install: true
+
+      - name: Cache Docker layers
+        uses: actions/cache@v3
+        with:
+          path: /tmp/.buildx-cache
+          key: ${{ runner.os }}-buildx-${{ github.sha }}
+          restore-keys: |
+            ${{ runner.os }}-buildx-
+
+      - name: Log in to GitHub Container Registry
+        uses: docker/login-action@v2
+        with:
+          registry: ghcr.io
+          username: ${{ github.repository_owner }}
+          password: ${{ secrets.GITHUB_TOKEN }}
+
+################################################
+# build/
+# └── docker
+#     ├── openim-api
+#     │   └── Dockerfile
+#     ├── openim-cmdutils
+#     │   └── Dockerfile
+#     ├── openim-crontask
+#     │   └── Dockerfile
+#     ├── openim-msggateway
+#     │   └── Dockerfile
+#     ├── openim-msgtransfer
+#     │   └── Dockerfile
+#     ├── openim-push
+#     │   └── Dockerfile
+#     ├── openim-rpc-auth
+#     │   └── Dockerfile
+#     ├── openim-rpc-conversation
+#     │   └── Dockerfile
+#     ├── openim-rpc-friend
+#     │   └── Dockerfile
+#     ├── openim-rpc-group
+#     │   └── Dockerfile
+#     ├── openim-rpc-msg
+#     │   └── Dockerfile
+#     ├── openim-rpc-third
+#     │   └── Dockerfile
+#     └── openim-rpc-user
+#         └── Dockerfile
+#############################################
+
+      - name: Extract metadata (tags, labels) for Docker openim-api
+        id: meta1
+        uses: docker/metadata-action@v4.6.0
+        with:
+          images: ghcr.io/openimsdk/openim-api
+
+      - name: Build and push Docker image for openim-api
+        uses: docker/build-push-action@v4
+        with:
+          context: .
+          file: ./build/images/openim-api/Dockerfile
+          platforms: linux/amd64,linux/arm64
+          push: ${{ github.event_name != 'pull_request' }}
+          tags: ${{ steps.meta1.outputs.tags }}
+          labels: ${{ steps.meta1.outputs.labels }}
+          cache-from: type=local,src=/tmp/.buildx-cache
+          cache-to: type=local,dest=/tmp/.buildx-cache
+
+      - name: Extract metadata (tags, labels) for Docker openim-cmdutils
+        id: meta2
+        uses: docker/metadata-action@v4.6.0
+        with:
+          images: ghcr.io/openimsdk/openim-cmdutils
+
+      - name: Build and push Docker image for openim-cmdutils
+        uses: docker/build-push-action@v4
+        with:
+          context: .
+          file: ./build/images/openim-cmdutils/Dockerfile
+          platforms: linux/amd64,linux/arm64
+          push: ${{ github.event_name != 'pull_request' }}
+          tags: ${{ steps.meta2.outputs.tags }}
+          labels: ${{ steps.meta2.outputs.labels }}
+          cache-from: type=local,src=/tmp/.buildx-cache
+          cache-to: type=local,dest=/tmp/.buildx-cache
+
+      - name: Extract metadata (tags, labels) for Docker openim-crontask
+        id: meta3
+        uses: docker/metadata-action@v4.6.0
+        with:
+          images: ghcr.io/openimsdk/openim-crontask
+
+      - name: Build and push Docker image for openim-crontask
+        uses: docker/build-push-action@v4
+        with:
+          context: .
+          file: ./build/images/openim-crontask/Dockerfile
+          platforms: linux/amd64,linux/arm64
+          push: ${{ github.event_name != 'pull_request' }}
+          tags: ${{ steps.meta3.outputs.tags }}
+          labels: ${{ steps.meta3.outputs.labels }}
+          cache-from: type=local,src=/tmp/.buildx-cache
+          cache-to: type=local,dest=/tmp/.buildx-cache
+
+      - name: Extract metadata (tags, labels) for Docker openim-msggateway
+        id: meta4
+        uses: docker/metadata-action@v4.6.0
+        with:
+          images: ghcr.io/openimsdk/openim-msggateway
+
+      - name: Build and push Docker image for openim-msggateway
+        uses: docker/build-push-action@v4
+        with:
+          context: .
+          file: ./build/images/openim-msggateway/Dockerfile
+          platforms: linux/amd64,linux/arm64
+          push: ${{ github.event_name != 'pull_request' }}
+          tags: ${{ steps.meta4.outputs.tags }}
+          labels: ${{ steps.meta4.outputs.labels }}
+          cache-from: type=local,src=/tmp/.buildx-cache
+          cache-to: type=local,dest=/tmp/.buildx-cache
+
+      - name: Extract metadata (tags, labels) for Docker openim-msgtransfer
+        id: meta5
+        uses: docker/metadata-action@v4.6.0
+        with:
+          images: ghcr.io/openimsdk/openim-msgtransfer
+
+      - name: Build and push Docker image for openim-msgtransfer
+        uses: docker/build-push-action@v4
+        with:
+          context: .
+          file: ./build/images/openim-msgtransfer/Dockerfile
+          platforms: linux/amd64,linux/arm64
+          push: ${{ github.event_name != 'pull_request' }}
+          tags: ${{ steps.meta5.outputs.tags }}
+          labels: ${{ steps.meta5.outputs.labels }}
+          cache-from: type=local,src=/tmp/.buildx-cache
+          cache-to: type=local,dest=/tmp/.buildx-cache
+          
+      - name: Extract metadata (tags, labels) for Docker openim-push
+        id: meta6
+        uses: docker/metadata-action@v4.6.0
+        with:
+          images: ghcr.io/openimsdk/openim-push
+
+      - name: Build and push Docker image for openim-push
+        uses: docker/build-push-action@v4
+        with:
+          context: .
+          file: ./build/images/openim-push/Dockerfile
+          platforms: linux/amd64,linux/arm64
+          push: ${{ github.event_name != 'pull_request' }}
+          tags: ${{ steps.meta6.outputs.tags }}
+          labels: ${{ steps.meta6.outputs.labels }}
+          cache-from: type=local,src=/tmp/.buildx-cache
+          cache-to: type=local,dest=/tmp/.buildx-cache
+
+      - name: Extract metadata (tags, labels) for Docker openim-rpc-auth
+        id: meta7
+        uses: docker/metadata-action@v4.6.0
+        with:
+          images: ghcr.io/openimsdk/openim-rpc-auth
+
+      - name: Build and push Docker image for openim-rpc-auth
+        uses: docker/build-push-action@v4
+        with:
+          context: .
+          file: ./build/images/openim-rpc-auth/Dockerfile
+          platforms: linux/amd64,linux/arm64
+          push: ${{ github.event_name != 'pull_request' }}
+          tags: ${{ steps.meta7.outputs.tags }}
+          labels: ${{ steps.meta7.outputs.labels }}
+          cache-from: type=local,src=/tmp/.buildx-cache
+          cache-to: type=local,dest=/tmp/.buildx-cache
+
+      - name: Extract metadata (tags, labels) for Docker openim-rpc-conversation
+        id: meta8
+        uses: docker/metadata-action@v4.6.0
+        with:
+          images: ghcr.io/openimsdk/openim-rpc-conversation
+
+      - name: Build and push Docker image for openim-rpc-conversation
+        uses: docker/build-push-action@v4
+        with:
+          context: .
+          file: ./build/images/openim-rpc-conversation/Dockerfile
+          platforms: linux/amd64,linux/arm64
+          push: ${{ github.event_name != 'pull_request' }}
+          tags: ${{ steps.meta8.outputs.tags }}
+          labels: ${{ steps.meta8.outputs.labels }}
+          cache-from: type=local,src=/tmp/.buildx-cache
+          cache-to: type=local,dest=/tmp/.buildx-cache
+
+      - name: Extract metadata (tags, labels) for Docker openim-rpc-friend
+        id: meta9
+        uses: docker/metadata-action@v4.6.0
+        with:
+          images: ghcr.io/openimsdk/openim-rpc-friend
+
+      - name: Build and push Docker image for openim-rpc-friend
+        uses: docker/build-push-action@v4
+        with:
+          context: .
+          file: ./build/images/openim-rpc-friend/Dockerfile
+          platforms: linux/amd64,linux/arm64
+          push: ${{ github.event_name != 'pull_request' }}
+          tags: ${{ steps.meta9.outputs.tags }}
+          labels: ${{ steps.meta9.outputs.labels }}
+          cache-from: type=local,src=/tmp/.buildx-cache
+          cache-to: type=local,dest=/tmp/.buildx-cache
+
+      - name: Extract metadata (tags, labels) for Docker openim-rpc-group
+        id: meta10
+        uses: docker/metadata-action@v4.6.0
+        with:
+          images: ghcr.io/openimsdk/openim-rpc-group
+
+      - name: Build and push Docker image for openim-rpc-group
+        uses: docker/build-push-action@v4
+        with:
+          context: .
+          file: ./build/images/openim-rpc-group/Dockerfile
+          platforms: linux/amd64,linux/arm64
+          push: ${{ github.event_name != 'pull_request' }}
+          tags: ${{ steps.meta10.outputs.tags }}
+          labels: ${{ steps.meta10.outputs.labels }}
+          cache-from: type=local,src=/tmp/.buildx-cache
+          cache-to: type=local,dest=/tmp/.buildx-cache
+
+      - name: Extract metadata (tags, labels) for Docker openim-rpc-msg
+        id: meta11
+        uses: docker/metadata-action@v4.6.0
+        with:
+          images: ghcr.io/openimsdk/openim-rpc-msg
+
+      - name: Build and push Docker image for openim-rpc-msg
+        uses: docker/build-push-action@v4
+        with:
+          context: .
+          file: ./build/images/openim-rpc-msg/Dockerfile
+          platforms: linux/amd64,linux/arm64
+          push: ${{ github.event_name != 'pull_request' }}
+          tags: ${{ steps.meta11.outputs.tags }}
+          labels: ${{ steps.meta11.outputs.labels }}
+          cache-from: type=local,src=/tmp/.buildx-cache
+          cache-to: type=local,dest=/tmp/.buildx-cache
+
+      - name: Extract metadata (tags, labels) for Docker openim-rpc-third
+        id: meta12
+        uses: docker/metadata-action@v4.6.0
+        with:
+          images: ghcr.io/openimsdk/openim-rpc-third
+
+      - name: Build and push Docker image for openim-rpc-third
+        uses: docker/build-push-action@v4
+        with:
+          context: .
+          file: ./build/images/openim-rpc-third/Dockerfile
+          platforms: linux/amd64,linux/arm64
+          push: ${{ github.event_name != 'pull_request' }}
+          tags: ${{ steps.meta12.outputs.tags }}
+          labels: ${{ steps.meta12.outputs.labels }}
+          cache-from: type=local,src=/tmp/.buildx-cache
+          cache-to: type=local,dest=/tmp/.buildx-cache
+
+      - name: Extract metadata (tags, labels) for Docker openim-rpc-user
+        id: meta13
+        uses: docker/metadata-action@v4.6.0
+        with:
+          images: ghcr.io/openimsdk/openim-rpc-user
+
+      - name: Build and push Docker image for openim-rpc-user
+        uses: docker/build-push-action@v4
+        with:
+          context: .
+          file: ./build/images/openim-rpc-user/Dockerfile
+          platforms: linux/amd64,linux/arm64
+          push: ${{ github.event_name != 'pull_request' }}
+          tags: ${{ steps.meta13.outputs.tags }}
+          labels: ${{ steps.meta13.outputs.labels }}
+          cache-from: type=local,src=/tmp/.buildx-cache
+          cache-to: type=local,dest=/tmp/.buildx-cache

.github/workflows/e2e-test.yml

@@ -0,0 +1,44 @@
+# Copyright © 2023 OpenIM. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+name: e2e
+
+on:
+  workflow_dispatch:
+  pull_request:
+  push:
+  schedule:
+    # run e2e test every 4 hours
+    - cron: 0 */4 * * *
+
+jobs:
+  build:
+    name: Test
+    runs-on: ubuntu-latest
+    env:
+      GO111MODULE: on
+    steps:
+
+      - name: Set up Go 1.21
+        uses: actions/setup-go@v2
+        with:
+          go-version: 1.21
+        id: go
+
+      - name: Check out code into the Go module directory
+        uses: actions/checkout@v2
+
+      - name: Create e2e test
+        run: |
+          echo "...test e2e"

.github/workflows/golangci-lint.yml

@@ -0,0 +1,50 @@
+# Copyright © 2023 OpenIM open source community. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+
+name: OpenIM golangci-lint
+on:
+  push:
+    branches: [main]
+  pull_request:
+jobs:
+    golangci:
+      name: lint
+      runs-on: ubuntu-latest
+      steps:
+        - uses: actions/checkout@v3
+        - uses: actions/setup-go@v4
+          with:
+            go-version: '1.21'
+            cache: false
+        - name: golangci-lint
+          uses: golangci/golangci-lint-action@v3.7.0
+          with:
+            # Require: version of golangci-lint to use in form of v1.2 or v1.2.3 or `latest` to use the latest version
+            version: v1.54
+
+            # Optional: working directory, useful for monorepos
+            # working-directory: server
+
+            # Optional: golangci-lint command line arguments.
+            # 
+            # Note: by default the `.golangci.yml` file should be at the root of the repository.
+            # The location of the configuration file can be changed by using `--config=`
+            # args: --timeout=30m --config=/scripts/.golangci.yml --issues-exit-code=0
+
+            # Optional: show only new issues if it's a pull request. The default value is `false`.
+            only-new-issues: true
+
+            # Optional:The mode to install golangci-lint. It can be 'binary' or 'goinstall'.
+            # install-mode: "goinstall"

.github/workflows/gosec.yml

@@ -1,30 +1,45 @@
-# name: Run gosec
+# Copyright © 2023 OpenIM. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
 
-# # gosec is a source code security audit tool for the Go language. It performs a static 
-# # analysis of the Go code, looking for potential security problems. The main functions of gosec are:
-# #     1. Find common security vulnerabilities, such as SQL injection, command injection, and cross-site scripting (XSS).
-# #     2. Audit codes according to common security standards and find non-standard codes.
-# #     3. Assist the Go language engineer to write safe and reliable code.
+name: OpenIM Run Gosec
 
-# on:
-#   push:
-#     branches: "*"
-#   pull_request:
-#     branches: "*"
-#     paths-ignore:
-#       - '*.md'
-#       - '*.yml'
-#       - '.github'
+# gosec is a source code security audit tool for the Go language. It performs a static 
+# analysis of the Go code, looking for potential security problems. The main functions of gosec are:
+#     1. Find common security vulnerabilities, such as SQL injection, command injection, and cross-site scripting (XSS).
+#     2. Audit codes according to common security standards and find non-standard codes.
+#     3. Assist the Go language engineer to write safe and reliable code.
+# https://github.com/securego/gosec/
+on:
+  push:
+    branches: "*"
+  pull_request:
+    branches: "*"
+    paths-ignore:
+      - '*.md'
+      - '*.yml'
+      - '.github'
 
-# jobs:
-#   golang-security-action:
-#     runs-on: ubuntu-latest
-#     env:
-#       GO111MODULE: on
-#     steps:
-#       - name: Check out code
-#         uses: actions/checkout@v3
-#       - name: Run Gosec Security Scanner
-#         uses: securego/gosec@master
-#         with:
-#           args: ./...
+jobs:
+  golang-security-action:
+    runs-on: ubuntu-latest
+    env:
+      GO111MODULE: on
+    steps:
+      - name: Check out code
+        uses: actions/checkout@v3
+      - name: Run Gosec Security Scanner
+        uses: securego/gosec@master
+        with:
+          args: ./...
+        continue-on-error: true

.github/workflows/greetings.yml

@@ -0,0 +1,47 @@
+# Copyright © 2023 OpenIM. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+name: first-interaction
+
+on:
+  issues:
+    types: [opened]
+  pull_request:
+    branches: [main]
+    types: [opened]
+
+jobs:
+  check_for_first_interaction:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v3
+      - uses: actions/first-interaction@v1.1.1
+        with:
+          repo-token: ${{ secrets.BOT_GITHUB_TOKEN }}
+          pr-message: |
+            Hello! Thank you for your contribution.
+            
+            If you are fixing a bug, please reference the issue number in the description.
+
+            If you are implementing a feature request, please check with the maintainers that the feature will be accepted first.
+
+            [Join slack 🤖](https://join.slack.com/t/openimsdk/shared_invite/zt-1tmoj26uf-_FDy3dowVHBiGvLk9e5Xkg) to connect and communicate with our developers.
+
+          issue-message: |
+            Hello! Thank you for filing an issue.
+
+            If this is a bug report, please include relevant logs to help us debug the problem.
+            
+            [Join slack 🤖](https://join.slack.com/t/openimsdk/shared_invite/zt-1tmoj26uf-_FDy3dowVHBiGvLk9e5Xkg) to connect and communicate with our developers.
+        continue-on-error: true

.github/workflows/help-comment-issue.yml

@@ -1,3 +1,17 @@
+# Copyright © 2023 OpenIM. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
 name: Good frist issue add comment
 on:
   issues:

.github/workflows/issue-robot.yml

@@ -1,3 +1,17 @@
+# Copyright © 2023 OpenIM open source community. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
 name: 'issue translator'
 on:
   issue_comment:

.github/workflows/link-pr.yml

@@ -1,3 +1,17 @@
+# Copyright © 2023 OpenIM open source community. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
 name: Github Rebot for Link check error
 
 # Every Monday at 12:30 p.m
@@ -13,7 +27,7 @@ jobs:
 
       - name: Link Checker
         id: lychee
-        uses: lycheeverse/lychee-action@v1.7.0
+        uses: lycheeverse/lychee-action@v1.8.0
         with:
             # For parameter description, see https://github.com/lycheeverse/lychee#commandline-parameters
             # Actions Link address -> https://github.com/lycheeverse/lychee-action

.github/workflows/lock-issue.yml

@@ -0,0 +1,65 @@
+# Copyright © 2023 OpenIM open source community. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+name: 'Lock Threads'
+
+on:
+  schedule:
+    - cron: '0 * * * *'
+  workflow_dispatch:
+
+permissions:
+  issues: write
+  pull-requests: write
+
+concurrency:
+  group: lock
+
+jobs:
+  action:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: dessant/lock-threads@v4
+        with:
+          github-token: ${{ secrets.BOT_GITHUB_TOKEN }}
+          issue-inactive-days: '365'
+          exclude-issue-created-before: ''
+          exclude-issue-created-after: ''
+          exclude-issue-created-between: ''
+          exclude-issue-closed-before: ''
+          exclude-issue-closed-after: ''
+          exclude-issue-closed-between: ''
+          include-any-issue-labels: ''
+          include-all-issue-labels: ''
+          exclude-any-issue-labels: ''
+          add-issue-labels: ''
+          remove-issue-labels: ''
+          issue-comment: ''
+          issue-lock-reason: 'resolved'
+          pr-inactive-days: '365'
+          exclude-pr-created-before: ''
+          exclude-pr-created-after: ''
+          exclude-pr-created-between: ''
+          exclude-pr-closed-before: ''
+          exclude-pr-closed-after: ''
+          exclude-pr-closed-between: ''
+          include-any-pr-labels: ''
+          include-all-pr-labels: ''
+          exclude-any-pr-labels: ''
+          add-pr-labels: ''
+          remove-pr-labels: ''
+          pr-comment: ''
+          pr-lock-reason: 'resolved'
+          process-only: ''
+          log-output: false

.github/workflows/milestone.yml

@@ -0,0 +1,72 @@
+# Copyright © 2023 OpenIM. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# shamelessly copied from https://github.com/sigstore/cosign/blob/main/.github/workflows/milestone.yaml
+
+name: milestone
+
+on:
+  pull_request_target:
+    types: [closed]
+    branches:
+      - main
+
+jobs:
+  milestone:
+    runs-on: ubuntu-latest
+
+    permissions:
+      actions: none
+      checks: none
+      contents: read
+      deployments: none
+      issues: write
+      packages: none
+      pull-requests: write
+      repository-projects: none
+      security-events: none
+      statuses: none
+
+    steps:
+      - uses: actions/github-script@v6 # v6
+        with:
+          script: |
+            if (!context.payload.pull_request.merged) {
+              console.log('PR was not merged, skipping.');
+              return;
+            }
+
+            if (!!context.payload.pull_request.milestone) {
+              console.log('PR has existing milestone, skipping.');
+              return;
+            }
+
+            milestones = await github.rest.issues.listMilestones({
+              owner: context.repo.owner,
+              repo: context.repo.repo,
+              state: 'open',
+              sort: 'due_on',
+              direction: 'asc'
+            })
+            if (milestones.data.length === 0) {
+              console.log('There are no milestones, skipping.');
+              return;
+            }
+
+            await github.rest.issues.update({
+              owner: context.repo.owner,
+              repo: context.repo.repo,
+              issue_number: context.payload.pull_request.number,
+              milestone: milestones.data[0].number
+            });

.github/workflows/opencommit.yml

@@ -1,4 +1,18 @@
-name: 'OpenCommit Action'
+# Copyright © 2023 OpenIM. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+name: 'OpenIM Commit Action'
 
 on:
   push:
@@ -13,7 +27,7 @@ jobs:
     permissions: write-all
     steps:
       - name: Setup Node.js Environment
-        uses: actions/setup-node@v2
+        uses: actions/setup-node@v3
         with:
           node-version: '16'
       - uses: actions/checkout@v3

.github/workflows/openimci.yml

@@ -0,0 +1,172 @@
+# Copyright © 2023 OpenIM open source community. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+name: OpenIM CI Aotu Build and Install
+
+on: 
+  push:
+    branches:
+        - main
+    paths-ignore:
+        - "docs/**"
+        - "README.md"
+        - "README_zh-CN.md"
+        - "CONTRIBUTING.md"
+  pull_request:
+    branches:
+        - main
+    paths-ignore:
+        - "README.md"
+        - "README_zh-CN.md"
+        - "CONTRIBUTING.md"
+        - "docs/**"
+
+env:
+  GO_VERSION: "1.19"
+  GOLANGCI_VERSION: "v1.50.1"
+
+
+jobs:
+  openim:
+    name: Test with go ${{ matrix.go_version }} on ${{ matrix.os }}
+    runs-on: ${{ matrix.os }}
+    permissions:
+        contents: write
+    environment:
+      name: openim
+
+    strategy:
+      matrix:
+        go_version: ["1.18","1.19","1.20","1.21"]
+        os: [ubuntu-latest]
+
+    steps:
+    - name: Setup
+      uses: actions/checkout@v3
+      
+    - name: Set up Go ${{ matrix.go_version }}
+      uses: actions/setup-go@v4
+      with:
+        go-version: ${{ matrix.go_version }}
+      id: go
+
+    - name: Install Task
+      uses: arduino/setup-task@v1
+      with:
+        version: 2.x
+
+    - name: Module Operations
+      run: |
+        sudo make tidy
+        sudo make tools.verify.go-gitlint
+
+    - name: Format Code
+      run: sudo make format
+      continue-on-error: true
+
+    - name: Generate Files
+      run: make gen
+      continue-on-error: true
+
+    - name: Build Source
+      run: sudo make build
+
+    - name: Cleanup Build
+      run: sudo make clean
+
+    - name: Push Changes to Main
+      uses: stefanzweifel/git-auto-commit-action@v4
+      with:
+        commit_message: "cicd: robot automated Change"
+        branch: main
+      continue-on-error: true
+
+    - name: Set Current Directory
+      id: set_directory
+      run: echo "::set-output name=directory::$(pwd)"
+      continue-on-error: true
+
+    - name: Collect and Display Test Coverage
+      id: collect_coverage
+      run: |
+        cd ${{ steps.set_directory.outputs.directory }}
+        make cover
+        echo "::set-output name=coverage_file::./_output/tmp/coverage.out"
+        echo "Test Coverage:"
+        cat ${{ steps.collect_coverage.outputs.coverage_file }}
+      continue-on-error: true
+
+  openim-start:
+    name: Test OpenIM install/start on ${{ matrix.os }}
+    runs-on: ${{ matrix.os }}
+    environment:
+      name: openim
+    strategy:
+      matrix:
+        go_version: ["1.21"]
+        os: ["ubuntu-latest"]
+    steps:
+    - name: Checkout and Install OpenIM
+      uses: actions/checkout@v3
+    - name: Install Task
+      uses: arduino/setup-task@v1
+      with:
+        version: 2.x
+    - name: Run OpenIM make install start
+      run: |
+        sudo make install
+
+  execute-scripts:
+    name: Execute OpenIM script on ${{ matrix.os }}
+    runs-on: ${{ matrix.os }}
+    environment:
+      name: openim
+    strategy:
+      matrix:
+        go_version: ["1.20"]
+        os: ["ubuntu-latest"]
+    steps:
+    - name: Checkout code
+      uses: actions/checkout@v3
+
+    - name: Set up Go ${{ matrix.go_version }}
+      uses: actions/setup-go@v4
+      with:
+        go-version: ${{ matrix.go_version }}
+      id: go
+    - name: Install Task
+      uses: arduino/setup-task@v1
+      with:
+        version: 2.x
+    - name: Docker Operations
+      run: |
+        curl -o docker-compose.yaml https://raw.githubusercontent.com/OpenIMSDK/openim-docker/main/example/basic-openim-server-dependency.yml
+        sudo docker compose up -d
+        sudo sleep 60
+
+    - name: Module Operations
+      run: |
+        sudo make tidy
+        sudo make tools.verify.go-gitlint
+
+    - name: Build, Start and Check Services
+      run: |
+        sudo make init
+        sudo make build
+        sudo make start
+        sudo make check
+
+    - name: Print OpenIM Logs
+      run: sudo cat ./_output/logs/* 2>/dev/null
+      continue-on-error: true

.github/workflows/project-progress.yml

@@ -1,3 +1,17 @@
+# Copyright © 2023 OpenIM open source community. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
 # GitHub recommends pinning actions to a commit SHA.
 # To get a newer version, you will need to update the SHA.
 # You can also reference a tag or branch, but the action may change without warning.
@@ -17,6 +31,6 @@ jobs:
     steps:
       - uses: alex-page/github-project-automation-plus@v0.8.3
         with:
-          project: OpenIM 2023 Sprint 🔥
+          project: openim-powerful
           column: In Progress
           repo-token: ${{ secrets.BOT_GITHUB_TOKEN }}

.github/workflows/pull-request.yml

@@ -0,0 +1,122 @@
+# Copyright © 2023 OpenIM. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+name: Github Pull Request
+on:
+  push:
+    branches: [main]
+    paths-ignore:
+      - 'README.md'
+      - 'CONTRIBUTING.md'
+      - 'docs/**'
+  workflow_dispatch:
+  schedule:
+    - cron: '0 2 * * *'
+
+permissions:
+  contents: write
+  pull-requests: write
+
+jobs:
+  build:
+    runs-on: ubuntu-latest
+    steps:
+      - name: checkout
+        uses: actions/checkout@v3
+        with:
+          fetch-depth: 0
+
+      - name: Get League branch Patch
+        run: |
+          git config user.name 'openimbot'
+          git config user.email 'openimsdk@qq.com'
+          git checkout -b cicd/patch-${{ github.event.number }}
+      - uses: actions/setup-node@v3
+      - name: Setup Go
+        uses: actions/setup-go@v4
+      - name: Run go modules tidy
+        run: |
+          sudo make tidy
+          sudo make tools.verify.go-gitlint
+          echo "Run go modules tidy successfully" 
+
+      - name: Run go format
+        run: |
+          sudo make format
+          echo "Run go format successfully" 
+        continue-on-error: true
+
+      - name: Run go lint
+        run: |
+          sudo make lint
+          echo "Run go lint successfully" 
+        continue-on-error: true
+
+      - name: Generate all necessary files, such as error code files
+        run: |
+          make generate
+          echo "Generate all necessary files successfully" 
+        continue-on-error: true
+
+      - name: Run unit test and get test coverage
+        run: |
+          make cover
+          echo "Run unit test and get test coverage successfully" 
+        continue-on-error: true
+
+    #   - name: Initialize CodeQL
+    #     uses: github/codeql-action/init@v2
+    #     with:
+    #       languages: go
+
+    #   - name: Perform CodeQL Analysis
+        # uses: github/codeql-action/analyze@v2
+
+      - name: OpenIM verify copyright
+        run: |
+          sudo make verify-copyright
+          sudo make add-copyright
+          echo "OpenIM verify successfully" 
+        continue-on-error: true
+      
+    #   - name: Commit code
+    #     run: |
+    #         git add .
+    #         git commit -m "cicd: bump League Patch to cicd/patch-${{ github.event.number }}"
+    
+      - name: Create Pull Request
+        uses: peter-evans/create-pull-request@v5
+        with:
+          token: ${{ secrets.BOT_GITHUB_TOKEN }}
+          commit-message: "cicd: bump League Patch to cicd/patch-${{ github.event.number }}"
+          title: Bump League Patch to cicd/patch-${{ github.event.number }}
+          author: kubbot <kubbot@3293172751ysy@gmail.com>
+          signoff: false
+          draft: false
+          branch: "cicd/patch-${{ github.event.number }}"
+          assignees: cubxxw
+          reviewers: cubxxw
+          delete-branch: true
+          body: |
+            Review criteria:
+
+            - [ ] Disenchanter can connect and issue actions
+            
+            This is an automated PR. @ ${{ github.actor }}
+            <sub>[workflow](https://github.com/OpenIMSDK/Open-IM-Server/blob/main/.github/workflows/pull-request.yml).</sub>
+          base: main
+          labels: |
+            kind/documentation
+            enhancement
+            report

.github/workflows/release-drafter.yml

@@ -0,0 +1,55 @@
+# Copyright © 2023 OpenIM. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+name: Release Drafter
+
+on:
+  push:
+    # branches to consider in the event; optional, defaults to all
+    branches:
+      - main
+  # pull_request event is required only for autolabeler
+  pull_request:
+    # Only following types are handled by the action, but one can default to all as well
+    # types: [opened, reopened, synchronize]
+  # pull_request_target event is required for autolabeler to support PRs from forks
+  # pull_request_target:
+  #   types: [opened, reopened, synchronize]
+
+permissions:
+  contents: read
+
+jobs:
+  update_release_draft:
+    permissions:
+      # write permission is required to create a github release
+      contents: write
+      # write permission is required for autolabeler
+      # otherwise, read permission is required at least
+      pull-requests: write
+    runs-on: ubuntu-latest
+    steps:
+      # (Optional) GitHub Enterprise requires GHE_HOST variable set
+      #- name: Set GHE_HOST
+      #  run: |
+      #    echo "GHE_HOST=${GITHUB_SERVER_URL##https:\/\/}" >> $GITHUB_ENV
+
+      # Drafts your next Release notes as Pull Requests are merged into "master"
+      - uses: release-drafter/release-drafter@v5
+        # (Optional) specify config name to use, relative to .github/. Default: release-drafter.yml
+        # with:
+        #   config-name: my-config.yml
+        #   disable-autolabeler: true
+        env:
+          GITHUB_TOKEN: ${{ secrets.REDBOT_GITHUB_TOKEN }}

.github/workflows/release.yml

@@ -0,0 +1,81 @@
+# Copyright © 2023 OpenIM. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+name: OpenIM Server Release Workflow
+
+on:
+  push:
+    # run only against tags
+    tags:
+      - '*'
+
+permissions:
+  contents: write
+  packages: write
+  issues: write
+
+jobs:
+  goreleaser:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v3
+        with:
+          fetch-depth: 0
+      - run: git fetch --force --tags
+      - uses: actions/setup-go@v4
+        with:
+          go-version: stable
+      # More assembly might be required: Docker logins, GPG, etc. It all depends
+      # on your needs.
+      - uses: goreleaser/goreleaser-action@v4
+        with:
+          # either 'goreleaser' (default) or 'goreleaser-pro':
+          distribution: goreleaser
+          version: latest
+          workdir: .
+          args: release -f ./build/goreleaser.yaml --rm-dist --clean --release-footer-tmpl=scripts/template/footer.md.tmpl --release-header-tmpl=scripts/template/head.md.tmpl
+        env:
+          USERNAME: ${{ github.repository_owner }}
+          GITHUB_TOKEN: ${{ secrets.BOT_GITHUB_TOKEN }}
+          FURY_TOKEN: ${{ secrets.FURY_TOKEN }}
+          # Your GoReleaser Pro key, if you are using the 'goreleaser-pro'
+          # distribution:
+          # GORELEASER_KEY: ${{ secrets.GORELEASER_KEY }}
+
+  goreleaser-check-pkgs:
+    runs-on: ubuntu-latest
+    env:
+      DOCKER_CLI_EXPERIMENTAL: "enabled"
+    needs: [ goreleaser ]
+    if: github.ref == 'refs/heads/main'
+    strategy:
+      matrix:
+        format: [ deb, rpm, apk ]
+    steps:
+      - uses: actions/checkout@v3 # v3
+        with:
+          fetch-depth: 0
+      - uses: arduino/setup-task@e26d8975574116b0097a1161e0fe16ba75d84c1c # v1
+        with:
+          version: 3.x
+          repo-token: ${{ secrets.GITHUB_TOKEN }}
+      - uses: docker/setup-qemu-action@2b82ce82d56a2a04d2637cd93a637ae1b359c0a7 # v2
+      - uses: actions/cache@88522ab9f39a2ea568f7027eddc7d8d8bc9d59c8 # v3
+        with:
+          path: |
+            ./_output/dist/*.deb
+            ./_output/dist/*.rpm
+            ./_output/dist/*.apk
+          key: ${{ github.ref }}
+      - run: task goreleaser:test:${{ matrix.format }}

.github/workflows/scripts-verify.yml

@@ -0,0 +1,74 @@
+# Copyright © 2023 OpenIM. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+name: OpenIM executes the script validation code
+
+on: 
+  push:
+    branches:
+        - main
+    paths-ignore:
+        - "docs/**"
+        - "README.md"
+        - "README_zh-CN.md"
+        - "CONTRIBUTING.md"
+  pull_request:
+    branches:
+        - main
+    paths-ignore:
+        - "README.md"
+        - "README_zh-CN.md"
+        - "CONTRIBUTING.md"
+        - "docs/**"
+
+env:
+  GO_VERSION: "1.19"
+  GOLANGCI_VERSION: "v1.50.1"
+
+jobs:
+  openim:
+    name: Test with go ${{ matrix.go_version }} on ${{ matrix.os }}
+    runs-on: ${{ matrix.os }}
+    permissions:
+        contents: write
+    environment:
+      name: openim
+
+    strategy:
+      matrix:
+        go_version: ["1.21"]
+        os: [ubuntu-latest]
+
+    steps:
+    - name: Setup
+      uses: actions/checkout@v3
+      
+    - name: In ${{ matrix.os }} Execute the script validation code
+      uses: actions/setup-go@v4
+      with:
+        go-version: ${{ matrix.go_version }}
+      id: go
+
+    - name: scripts validation
+      run: |
+        sudo make verify
+      continue-on-error: true
+
+    - name: verify format
+      run: |
+        sudo make format
+
+    - name: verify license
+      run: |
+        sudo make verify-copyright

.github/workflows/stale.yml

@@ -1,3 +1,17 @@
+# Copyright © 2023 OpenIM. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
 # This workflow warns and then closes issues and PRs that have had no activity for a specified amount of time.
 #
 # You can adjust the behavior by modifying this file.
@@ -18,7 +32,7 @@ jobs:
       pull-requests: write
 
     steps:
-    - uses: actions/stale@v5
+    - uses: actions/stale@v8
       with:
         repo-token: ${{ secrets.BOT_GITHUB_TOKEN }}
         days-before-stale: 60

.github/workflows/sync-release.yml

@@ -0,0 +1,43 @@
+# Copyright © 2023 KubeCub open source community. All rights reserved.
+# Licensed under the MIT License (the "License");
+# you may not use this file except in compliance with the License.
+
+# https://github.com/BetaHuhn/repo-file-sync-action
+name: Synchronize kubecub public code to other repositories
+on:
+    push:
+        paths:
+            - scripts/*
+            - docs/*
+            - config/*
+        branches:
+          - release-v*.*
+    workflow_dispatch:
+
+jobs:
+  sync:
+    runs-on: ubuntu-latest
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v3
+
+      - name: Run GitHub File Sync
+        uses: BetaHuhn/repo-file-sync-action@latest
+        with:
+          GH_INSTALLATION_TOKEN: "${{ secrets.BOT_GITHUB_TOKEN }}"
+          CONFIG_PATH: .github/sync-release.yml
+          ORIGINAL_MESSAGE: true
+          SKIP_PR: true
+          COMMIT_EACH_FILE: false
+          COMMIT_BODY: "🤖 kubbot to synchronize the warehouse"
+          GIT_EMAIL: "3293172751ysy@gmail.com"
+          GIT_USERNAME: "kubbot"
+          PR_BODY: 👌 kubecub provides automated community services
+          REVIEWERS: |
+            kubbot
+            cubxxw
+          PR_LABELS: |
+            file-sync
+            automerge
+          ASSIGNEES: |
+            kubbot

.github/workflows/sync.yml

@@ -8,9 +8,6 @@ on:
     push:
         branches:
           - main
-    pull_request:
-        branches:
-          - main
     workflow_dispatch:
 
 jobs:
@@ -25,7 +22,6 @@ jobs:
         with:
           GH_INSTALLATION_TOKEN: "${{ secrets.BOT_GITHUB_TOKEN }}"
           CONFIG_PATH: .github/sync.yml
-          GH_PAT: "${{ secrets.BOT_GITHUB_TOKEN }}"
           ORIGINAL_MESSAGE: true
           SKIP_PR: true
           COMMIT_EACH_FILE: false

.gitignore

@@ -22,6 +22,7 @@ logs
 .devcontainer
 components
 out-test
+Dockerfile.cross
 
 ### Makefile ###
 tmp/
@@ -29,18 +30,24 @@ bin/
 output/
 _output/
 
+### OpenIM Config ###
+config/config.yaml
+./config/config.yaml
+.env
+./.env
+
 ### OpenIM deploy ###
-deploy/open_im_demo
-deploy/open_im_api
-deploy/open_im_msg_gateway
-deploy/open_im_msg_transfer
-deploy/open_im_push
-deploy/open_im_timer_task
-deploy/open_im_rpc_user
-deploy/open_im_rpc_friend
-deploy/open_im_rpc_group
-deploy/open_im_rpc_msg
-deploy/open_im_rpc_auth
+deploy/openim_demo
+deploy/openim-api
+deploy/openim-rpc-msg_gateway
+deploy/openim-msgtransfer
+deploy/openim-push
+deploy/openim_timer_task
+deploy/openim-rpc-user
+deploy/openim-rpc-friend
+deploy/openim-rpc-group
+deploy/openim-rpc-msg
+deploy/openim-rpc-auth
 deploy/Open-IM-SDK-Core
 
 # files used by the developer
@@ -152,10 +159,11 @@ flycheck_*.el
 *.out
 
 # Dependency directories (remove the comment below to include it)
-# vendor/
+vendor/
 
 # Go workspace file
-go.work
+# go.work
+go.work.sum
 
 ### JetBrains ###
 # Covers JetBrains IDEs: IntelliJ, RubyMine, PhpStorm, AppCode, PyCharm, CLion, Android Studio, WebStorm and Rider
@@ -163,7 +171,6 @@ go.work
 
 # User-specific stuff
 .idea/
-.idea
 .idea/**/workspace.xml
 .idea/**/tasks.xml
 .idea/**/usage.statistics.xml
@@ -353,7 +360,6 @@ cscope.po.out
 *testsdir
 *testsfile
 *testsfiles
-*test
 *testdir
 *testfile
 *testfiles
@@ -391,3 +397,7 @@ Sessionx.vim
 [._]*.un~
 
 # End of https://www.toptal.com/developers/gitignore/api/go,git,vim,tags,test,emacs,backup,jetbrains
+.idea
+dist/
+.env
+config/config.yaml

.gitmodules

@@ -1,4 +0,0 @@
-
-[submodule "cmd/Open-IM-SDK-Core"]
-	path = cmd/Open-IM-SDK-Core
-	url = https://github.com/OpenIMSDK/Open-IM-SDK-Core.git

.golangci.yml

@@ -1,10 +1,27 @@
+# Copyright © 2023 OpenIMSDK open source community. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# This file contains all available configuration options
+# with their default values.
+
 # options for analysis running
 run:
   # default concurrency is a available CPU number
   concurrency: 4
 
   # timeout for analysis, e.g. 30s, 5m, default is 1m
-  timeout: 1m
+  timeout: 5m
 
   # exit code when at least one issue was found, default is 1
   issues-exit-code: 1
@@ -12,10 +29,36 @@ run:
   # include test files or not, default is true
   tests: true
 
+  # list of build tags, all linters use it. Default is empty list.
+  build-tags:
+    - mytag
+
+  # which dirs to skip: issues from them won't be reported;
+  # can use regexp here: generated.*, regexp is applied on full path;
+  # default value is empty list, but default dirs are skipped independently
+  # from this option's value (see skip-dirs-use-default).
+  # "/" will be replaced by current OS file path separator to properly work
+  # on Windows.
+  skip-dirs:
+    - util
+    - .*~
+    - api/swagger/docs
+    - server/docs
+
   # default is true. Enables skipping of directories:
   #   vendor$, third_party$, testdata$, examples$, Godeps$, builtin$
   skip-dirs-use-default: true
 
+  # which files to skip: they will be analyzed, but issues from them
+  # won't be reported. Default value is empty list, but there is
+  # no need to include all autogenerated files, we confidently recognize
+  # autogenerated files. If it's not please let us know.
+  # "/" will be replaced by current OS file path separator to properly work
+  # on Windows.
+  skip-files:
+    - ".*\\.my\\.go$"
+    - _test.go
+
   # by default isn't set. If set we pass it to "go list -mod={option}". From "go help modules":
   # If invoked with -mod=readonly, the go command is disallowed from the implicit
   # automatic updating of go.mod described above. Instead, it fails when any changes
@@ -30,6 +73,7 @@ run:
   # If false (default) - golangci-lint acquires file lock on start.
   allow-parallel-runners: true
 
+
 # output configuration options
 output:
   # colored-line-number|line-number|json|tab|checkstyle|code-climate, default is "colored-line-number"
@@ -44,15 +88,32 @@ output:
   # make issues output unique by line, default is true
   uniq-by-line: true
 
+  # add a prefix to the output file references; default is no prefix
+  path-prefix: ""
+
+  # sorts results by: filepath, line and column
+  sort-results: true
 
 # all available settings of specific linters
 linters-settings:
+  bidichk:
+    # The following configurations check for all mentioned invisible unicode
+    # runes. It can be omitted because all runes are enabled by default.
+    left-to-right-embedding: true
+    right-to-left-embedding: true
+    pop-directional-formatting: true
+    left-to-right-override: true
+    right-to-left-override: true
+    left-to-right-isolate: true
+    right-to-left-isolate: true
+    first-strong-isolate: true
+    pop-directional-isolate: true
   dogsled:
     # checks assignments with too many blank identifiers; default is 2
     max-blank-identifiers: 2
   dupl:
     # tokens count to trigger issue, 150 by default
-    threshold: 100
+    threshold: 200
   errcheck:
     # report about not checking of errors in type assertions: `a := b.(MyStruct)`;
     # default is false: such cases aren't reported by default.
@@ -62,65 +123,308 @@ linters-settings:
     # default is false: such cases aren't reported by default.
     check-blank: false
 
+    # [deprecated] comma-separated list of pairs of the form pkg:regex
+    # the regex is used to ignore names within pkg. (default "fmt:.*").
+    # see https://github.com/kisielk/errcheck#the-deprecated-method for details
+    #ignore: GenMarkdownTree,os:.*,BindPFlags,WriteTo,Help
+    #ignore: (os\.)?std(out|err)\..*|.*Close|.*Flush|os\.Remove(All)?|.*print(f|ln)?|os\.(Un)?Setenv
+
     # path to a file containing a list of functions to exclude from checking
     # see https://github.com/kisielk/errcheck#excluding-functions for details
     #exclude: errcheck.txt
+    
+  errorlint:
+    # Check whether fmt.Errorf uses the %w verb for formatting errors. See the readme for caveats
+    errorf: true
+    # Check for plain type assertions and type switches
+    asserts: true
+    # Check for plain error comparisons
+    comparison: true
+
   exhaustive:
+    # check switch statements in generated files also
+    check-generated: false
     # indicates that switch statements are to be considered exhaustive if a
     # 'default' case is present, even if all enum members aren't listed in the
     # switch
     default-signifies-exhaustive: false
+    # enum members matching the supplied regex do not have to be listed in
+    # switch statements to satisfy exhaustiveness
+    ignore-enum-members: ""
+    # consider enums only in package scopes, not in inner scopes
+    package-scope-only: false
+  exhaustivestruct:
+    struct-patterns:
+      - '*.Test'
+      - '*.Test2'
+      - '*.Embedded'
+      - '*.External'
+
+  # forbidigo:
+  #   # Forbid the following identifiers (identifiers are written using regexp):
+  #   forbid:
+  #     - ^print.*$
+  #     - 'fmt\.Print.*'
+  #     - fmt.Println.* # too much log noise
+  #     - ginkgo\\.F.* # these are used just for local development
+  #   # Exclude godoc examples from forbidigo checks.  Default is true.
+  #   exclude_godoc_examples: false
   funlen:
     lines: 150
-    statements: 40
+    statements: 50
+  gci:
+    # put imports beginning with prefix after 3rd-party packages;
+    # only support one prefix
+    # if not set, use goimports.local-prefixes
+    prefix: github.com/OpenIMSDK/Open-IM-Server
   gocognit:
     # minimal code complexity to report, 30 by default (but we recommend 10-20)
     min-complexity: 30
-  nestif:
-    # minimal complexity of if statements to report, 5 by default
-    min-complexity: 4
   goconst:
     # minimal length of string constant, 3 by default
-    min-len: 5
+    min-len: 3
     # minimal occurrences count to trigger, 3 by default
-    min-occurrences: 5
+    min-occurrences: 3
+    # ignore test files, false by default
+    ignore-tests: false
+    # look for existing constants matching the values, true by default
+    match-constant: true
+    # search also for duplicated numbers, false by default
+    numbers: false
+    # minimum value, only works with goconst.numbers, 3 by default
+    min: 3
+    # maximum value, only works with goconst.numbers, 3 by default
+    max: 3
+    # ignore when constant is not used as function argument, true by default
+    ignore-calls: true
+
+  gocritic:
+    # Which checks should be enabled; can't be combined with 'disabled-checks';
+    # See https://go-critic.github.io/overview#checks-overview
+    # To check which checks are enabled run `GL_DEBUG=gocritic golangci-lint run`
+    # By default list of stable checks is used.
+    enabled-checks:
+      #- rangeValCopy
+      - nestingreduce
+      - truncatecmp
+      - unnamedresult
+      - ruleguard
+
+    # Which checks should be disabled; can't be combined with 'enabled-checks'; default is empty
+    disabled-checks:
+      - regexpMust
+      - ifElseChain
+      #- exitAfterDefer
+
+    # Enable multiple checks by tags, run `GL_DEBUG=gocritic golangci-lint run` to see all tags and checks.
+    # Empty list by default. See https://github.com/go-critic/go-critic#usage -> section "Tags".
+    enabled-tags:
+      - performance
+    disabled-tags:
+      - experimental
+
+    # Settings passed to gocritic.
+    # The settings key is the name of a supported gocritic checker.
+    # The list of supported checkers can be find in https://go-critic.github.io/overview.
+    settings:
+      captLocal: # must be valid enabled check name
+        # whether to restrict checker to params only (default true)
+        paramsOnly: true
+      elseif:
+        # whether to skip balanced if-else pairs (default true)
+        skipBalanced: true
+      hugeParam:
+        # size in bytes that makes the warning trigger (default 80)
+        sizeThreshold: 80
+      nestingReduce:
+        # min number of statements inside a branch to trigger a warning (default 5)
+        bodyWidth: 5
+      rangeExprCopy:
+        # size in bytes that makes the warning trigger (default 512)
+        sizeThreshold: 512
+        # whether to check test functions (default true)
+        skipTestFuncs: true
+      rangeValCopy:
+        # size in bytes that makes the warning trigger (default 128)
+        sizeThreshold: 32
+        # whether to check test functions (default true)
+        skipTestFuncs: true
+      ruleguard:
+        # path to a gorules file for the ruleguard checker
+        rules: ''
+      truncateCmp:
+        # whether to skip int/uint/uintptr types (default true)
+        skipArchDependent: true
+      underef:
+        # whether to skip (*x).method() calls where x is a pointer receiver (default true)
+        skipRecvDeref: true
+      unnamedResult:
+        # whether to check exported functions
+        checkExported: true
   gocyclo:
     # minimal code complexity to report, 30 by default (but we recommend 10-20)
     min-complexity: 30
+  cyclop:
+    # the maximal code complexity to report
+    max-complexity: 50
+    # the maximal average package complexity. If it's higher than 0.0 (float) the check is enabled (default 0.0)
+    package-average: 0.0
+    # should ignore tests (default false)
+    skip-tests: false
   godot:
-    # check all top-level comments, not only declarations
-    check-all: false
+    # comments to be checked: `declarations`, `toplevel`, or `all`
+    scope: declarations
+    # list of regexps for excluding particular comment lines from check
+    exclude:
+      # example: exclude comments which contain numbers
+      # - '[0-9]+'
+    # check that each sentence starts with a capital letter
+    capital: false
   godox:
     # report any comments starting with keywords, this is useful for TODO or FIXME comments that
     # might be left in the code accidentally and should be resolved before merging
     keywords: # default keywords are TODO, BUG, and FIXME, these can be overwritten by this setting
+      #- TODO
+      - BUG
+      - FIXME
+      #- NOTE
       - OPTIMIZE # marks code that should be optimized before merging
       - HACK # marks hack-arounds that should be removed before merging
   gofmt:
     # simplify code: gofmt with `-s` option, true by default
     simplify: true
+
+  gofumpt:
+    # Select the Go version to target. The default is `1.18`.
+    lang-version: "1.20"
+
+    # Choose whether or not to use the extra rules that are disabled
+    # by default
+    extra-rules: false
+
+  goheader:
+    values:
+      const:
+        # define here const type values in format k:v, for example:
+        # COMPANY: MY COMPANY
+      regexp:
+        # define here regexp type values, for example
+        # AUTHOR: .*@mycompany\.com
+    template: # |-
+      # put here copyright header template for source code files, for example:
+      # Note: {{ YEAR }} is a builtin value that returns the year relative to the current machine time.
+      #
+      # {{ AUTHOR }} {{ COMPANY }} {{ YEAR }}
+      # SPDX-License-Identifier: Apache-2.0
+
+      # Licensed under the Apache License, Version 2.0 (the "License");
+      # you may not use this file except in compliance with the License.
+      # You may obtain a copy of the License at:
+
+      #   http://www.apache.org/licenses/LICENSE-2.0
+
+      # Unless required by applicable law or agreed to in writing, software
+      # distributed under the License is distributed on an "AS IS" BASIS,
+      # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+      # See the License for the specific language governing permissions and
+      # limitations under the License.
+    template-path:
+      # also as alternative of directive 'template' you may put the path to file with the template source
   goimports:
     # put imports beginning with prefix after 3rd-party packages;
     # it's a comma-separated list of prefixes
-    local-prefixes: github.com/org/project
-  golint:
-    # minimal confidence for issues, default is 0.8
-    min-confidence: 0.9
+    local-prefixes: github.com/OpenIMSDK/Open-IM-Server
+
   gomnd:
     settings:
       mnd:
         # the list of enabled checks, see https://github.com/tommy-muehle/go-mnd/#checks for description.
         checks: argument,case,condition,operation,return,assign
+        # ignored-numbers: 1000
+        # ignored-files: magic_.*.go
+        # ignored-functions: math.*
+  gomoddirectives:
+    # Allow local `replace` directives. Default is false.
+    replace-local: true
+    # List of allowed `replace` directives. Default is empty.
+    replace-allow-list:
+      - google.golang.org/grpc
+
+    # Allow to not explain why the version has been retracted in the `retract` directives. Default is false.
+    retract-allow-no-explanation: false
+    # Forbid the use of the `exclude` directives. Default is false.
+    exclude-forbidden: false
   gomodguard:
     allowed:
-      modules:                                                        # List of allowed modules
+      modules:    
+        - gorm.io/gen                                                    # List of allowed modules
+        - gorm.io/gorm
+        - gorm.io/driver/mysql
+        - k8s.io/klog
         # - gopkg.in/yaml.v2
       domains:                                                        # List of allowed module domains
-        # - golang.org
+        - google.golang.org
+        - gopkg.in
+        - golang.org
+        - github.com
+        - go.uber.org
+        - go.etcd.io
+    blocked:
+      versions:
+        - github.com/MakeNowJust/heredoc:
+            version: "> 2.0.9"
+            reason: "use the latest version"
+      local_replace_directives: false     # Set to true to raise lint issues for packages that are loaded from a local path via replace directive
+
+  gosec:
+    # To select a subset of rules to run.
+    # Available rules: https://github.com/securego/gosec#available-rules
+    includes:
+      - G401
+      - G306
+      - G101
+    # To specify a set of rules to explicitly exclude.
+    # Available rules: https://github.com/securego/gosec#available-rules
+    excludes:
+      - G204
+    # Exclude generated files
+    exclude-generated: true
+    # Filter out the issues with a lower severity than the given value. Valid options are: low, medium, high.
+    severity: "low"
+    # Filter out the issues with a lower confidence than the given value. Valid options are: low, medium, high.
+    confidence: "low"
+    # To specify the configuration of rules.
+    # The configuration of rules is not fully documented by gosec:
+    # https://github.com/securego/gosec#configuration
+    # https://github.com/securego/gosec/blob/569328eade2ccbad4ce2d0f21ee158ab5356a5cf/rules/rulelist.go#L60-L102
+    config:
+      G306: "0600"
+      G101:
+        pattern: "(?i)example"
+        ignore_entropy: false
+        entropy_threshold: "80.0"
+        per_char_threshold: "3.0"
+        truncate: "32"
+
+  gosimple:
+    # Select the Go version to target. The default is '1.13'.
+    go: "1.20"
+    # https://staticcheck.io/docs/options#checks
+    checks: [ "all" ]
+
   govet:
     # report about shadowed variables
     check-shadowing: true
 
+    # settings per analyzer
+    settings:
+      printf: # analyzer name, run `go tool vet help` to see all analyzers
+        funcs: # run `go tool vet help printf` to see available settings for `printf` analyzer
+          - (github.com/golangci/golangci-lint/pkg/logutils.Log).Infof
+          - (github.com/golangci/golangci-lint/pkg/logutils.Log).Warnf
+          - (github.com/golangci/golangci-lint/pkg/logutils.Log).Errorf
+          - (github.com/golangci/golangci-lint/pkg/logutils.Log).Fatalf
+
     # enable or disable analyzers by name
     enable:
       - atomicalign
@@ -128,17 +432,64 @@ linters-settings:
     disable:
       - shadow
     disable-all: false
-  depguard:
-    list-type: blacklist
-    include-go-root: false
-    packages:
-    packages-with-error-message:
+  # depguard:
+  #   list-type: blacklist
+  #   include-go-root: false
+  #   packages:
+  #     - github.com/Sirupsen/logrus
+  #   packages-with-error-message:
+  #     # specify an error message to output when a blacklisted package is used
+  #     - github.com/Sirupsen/logrus: "logging is allowed only by logutils.Log"
+
+
+  importas:
+    # if set to `true`, force to use alias.
+    no-unaliased: true
+    # List of aliases
+    alias:
+      # using `servingv1` alias for `knative.dev/serving/pkg/apis/serving/v1` package
+      - pkg: knative.dev/serving/pkg/apis/serving/v1
+        alias: servingv1
+      # using `autoscalingv1alpha1` alias for `knative.dev/serving/pkg/apis/autoscaling/v1alpha1` package
+      - pkg: knative.dev/serving/pkg/apis/autoscaling/v1alpha1
+        alias: autoscalingv1alpha1
+      # You can specify the package path by regular expression,
+      # and alias by regular expression expansion syntax like below.
+      # see https://github.com/julz/importas#use-regular-expression for details
+      - pkg: knative.dev/serving/pkg/apis/(\w+)/(v[\w\d]+)
+        alias: $1$2
+    # using `jwt` alias for `github.com/appleboy/gin-jwt/v2` package
+    jwt: github.com/appleboy/gin-jwt/v2
+
+  ireturn:
+    # ireturn allows using `allow` and `reject` settings at the same time.
+    # Both settings are lists of the keywords and regular expressions matched to interface or package names.
+    # keywords:
+    # - `empty` for `interface{}`
+    # - `error` for errors
+    # - `stdlib` for standard library
+    # - `anon` for anonymous interfaces
+
+    # By default, it allows using errors, empty interfaces, anonymous interfaces,
+    # and interfaces provided by the standard library.
+    allow:
+    - anon
+    - error
+    - empty
+    - stdlib
+    # You can specify idiomatic endings for interface
+    - (or|er)$
+
+    # Reject patterns
+    reject:
+    - github.com\/user\/package\/v4\.Type
+
   lll:
     # max line length, lines longer will be reported. Default is 120.
     # '\t' is counted as 1 character by default, and can be changed with the tab-width option
-    line-length: 120
+    line-length: 240
     # tab width in spaces. Default to 1.
-    tab-width: 1
+    tab-width: 4
   maligned:
     # print struct with more effective memory layout or not, false by default
     suggest-new: true
@@ -152,6 +503,37 @@ linters-settings:
   nakedret:
     # make an issue if func has more lines of code than this setting and it has naked returns; default is 30
     max-func-lines: 30
+
+  nestif:
+    # minimal complexity of if statements to report, 5 by default
+    min-complexity: 4
+
+  nilnil:
+    # By default, nilnil checks all returned types below.
+    checked-types:
+      - ptr
+      - func
+      - iface
+      - map
+      - chan
+
+  nlreturn:
+    # size of the block (including return statement that is still "OK")
+    # so no return split required.
+    block-size: 1
+
+  nolintlint:
+    # Disable to ensure that all nolint directives actually have an effect. Default is true.
+    allow-unused: false
+    # Disable to ensure that nolint directives don't have a leading space. Default is true.
+    allow-leading-space: true
+    # Exclude following linters from requiring an explanation.  Default is [].
+    allow-no-explanation: [ ]
+    # Enable to require an explanation of nonzero length after each nolint directive. Default is false.
+    require-explanation: false
+    # Enable to require nolint directives to mention the specific linter being suppressed. Default is false.
+    require-specific: true
+
   prealloc:
     # XXX: we don't recommend using this linter before doing performance profiling.
     # For most programs usage of prealloc will be a premature optimization.
@@ -161,17 +543,97 @@ linters-settings:
     simple: true
     range-loops: true # Report preallocation suggestions on range loops, true by default
     for-loops: false # Report preallocation suggestions on for loops, false by default
-  nolintlint:
-    # Enable to ensure that nolint directives are all used. Default is true.
-    allow-unused: false
-    # Disable to ensure that nolint directives don't have a leading space. Default is true.
-    allow-leading-space: true
-    # Exclude following linters from requiring an explanation.  Default is [].
-    allow-no-explanation: []
-    # Enable to require an explanation of nonzero length after each nolint directive. Default is false.
-    require-explanation: true
-    # Enable to require nolint directives to mention the specific linter being suppressed. Default is false.
-    require-specific: true
+
+  promlinter:
+    # Promlinter cannot infer all metrics name in static analysis.
+    # Enable strict mode will also include the errors caused by failing to parse the args.
+    strict: false
+    # Please refer to https://github.com/yeya24/promlinter#usage for detailed usage.
+    disabled-linters:
+    #  - "Help"
+    #  - "MetricUnits"
+    #  - "Counter"
+    #  - "HistogramSummaryReserved"
+    #  - "MetricTypeInName"
+    #  - "ReservedChars"
+    #  - "CamelCase"
+    #  - "lintUnitAbbreviations"
+    
+  predeclared:
+    # comma-separated list of predeclared identifiers to not report on
+    ignore: ""
+    # include method names and field names (i.e., qualified names) in checks
+    q: false
+  rowserrcheck:
+    packages:
+      - github.com/jmoiron/sqlx
+  revive:
+    # see https://github.com/mgechev/revive#available-rules for details.
+    ignore-generated-header: true
+    severity: warning
+    rules:
+      - name: indent-error-flow
+        severity: warning
+  staticcheck:
+    # Select the Go version to target. The default is '1.13'.
+    go: "1.16"
+    # https://staticcheck.io/docs/options#checks
+    checks: [ "all" ]
+
+  stylecheck:
+    # Select the Go version to target. The default is '1.13'.
+    go: "1.16"
+
+    # https://staticcheck.io/docs/options#checks
+    checks: [ "all", "-ST1000", "-ST1003", "-ST1016", "-ST1020", "-ST1021", "-ST1022" ]
+    # https://staticcheck.io/docs/options#dot_import_whitelist
+    dot-import-whitelist:
+      - fmt
+    # https://staticcheck.io/docs/options#initialisms
+    initialisms: [ "ACL", "API", "ASCII", "CPU", "CSS", "DNS", "EOF", "GUID", "HTML", "HTTP", "HTTPS", "ID", "IP", "JSON", "QPS", "RAM", "RPC", "SLA", "SMTP", "SQL", "SSH", "TCP", "TLS", "TTL", "UDP", "UI", "GID", "UID", "UUID", "URI", "URL", "UTF8", "VM", "XML", "XMPP", "XSRF", "XSS" ]
+    # https://staticcheck.io/docs/options#http_status_code_whitelist
+    http-status-code-whitelist: [ "200", "400", "404", "500" ]
+
+
+  tagliatelle:
+    # check the struck tag name case
+    case:
+      # use the struct field name to check the name of the struct tag
+      use-field-name: true
+      rules:
+        # any struct tag type can be used.
+        # support string case: `camel`, `pascal`, `kebab`, `snake`, `goCamel`, `goPascal`, `goKebab`, `goSnake`, `upper`, `lower`
+        json: camel
+        yaml: camel
+        xml: camel
+        bson: camel
+        avro: snake
+        mapstructure: kebab
+
+  testpackage:
+    # regexp pattern to skip files
+    skip-regexp: (id|export|internal)_test\.go
+  thelper:
+    # The following configurations enable all checks. It can be omitted because all checks are enabled by default.
+    # You can enable only required checks deleting unnecessary checks.
+    test:
+      first: true
+      name: true
+      begin: true
+    benchmark:
+      first: true
+      name: true
+      begin: true
+    tb:
+      first: true
+      name: true
+      begin: true
+
+  tenv:
+    # The option `all` will run against whole test files (`_test.go`) regardless of method/function signatures.
+    # By default, only methods that take `*testing.T`, `*testing.B`, and `testing.TB` as arguments are checked.
+    all: false
+
   unparam:
     # Inspect exported functions, default is false. Set to true if no external program/library imports your code.
     # XXX: if you enable this setting, unparam will report a lot of false-positives in text editors:
@@ -187,6 +649,24 @@ linters-settings:
   whitespace:
     multi-if: false   # Enforces newlines (or comments) after every multi-line if statement
     multi-func: false # Enforces newlines (or comments) after every multi-line function signature
+
+  wrapcheck:
+    # An array of strings that specify substrings of signatures to ignore.
+    # If this set, it will override the default set of ignored signatures.
+    # See https://github.com/tomarrell/wrapcheck#configuration for more information.
+    ignoreSigs:
+      - .Errorf(
+      - errors.New(
+      - errors.Unwrap(
+      - .Wrap(
+      - .Wrapf(
+      - .WithMessage(
+      - .WithMessagef(
+      - .WithStack(
+    ignorePackageGlobs:
+        - encoding/*
+        - github.com/pkg/*
+
   wsl:
     # If true append is only allowed to be cuddled if appending value is
     # matching variables, fields or types on line above. Default is true.
@@ -194,6 +674,8 @@ linters-settings:
     # Allow calls and assignments to be cuddled as long as the lines have any
     # matching variables, fields or types. Default is true.
     allow-assign-and-call: true
+    # Allow assignments to be cuddled with anything. Default is false.
+    allow-assign-and-anything: false
     # Allow multiline assignments to be cuddled. Default is true.
     allow-multiline-assign: true
     # Allow declarations (var) to be cuddled.
@@ -206,65 +688,170 @@ linters-settings:
     force-err-cuddling: false
     # Allow leading comments to be separated with empty liens
     allow-separated-leading-comment: false
+  makezero:
+    # Allow only slices initialized with a length of zero. Default is false.
+    always: false
+
+
+  # The custom section can be used to define linter plugins to be loaded at runtime. See README doc
+  #  for more info.
+  #custom:
+    # Each custom linter should have a unique name.
+    #example:
+      # The path to the plugin *.so. Can be absolute or local. Required for each custom linter
+      #path: /path/to/example.so
+      # The description of the linter. Optional, just for documentation purposes.
+      #description: This is an example usage of a plugin linter.
+      # Intended to point to the repo location of the linter. Optional, just for documentation purposes.
+      #original-url: github.com/golangci/example-linter
 
 linters:
   # please, do not use `enable-all`: it's deprecated and will be removed soon.
   # inverted configuration with `enable-all` and `disable` is not scalable during updates of golangci-lint
+  # enable-all: true
   disable-all: true
   enable:
+    - typecheck
+    - asciicheck
     - bodyclose
-    - deadcode
-    - depguard
+    - cyclop
+    # - depguard
     - dogsled
     - dupl
+    - durationcheck
     - errcheck
+    - errorlint
+    - exhaustive
+    - exportloopref
+    # - forbidigo
     - funlen
-    - gochecknoinits
+    # - gci
+    # - gochecknoinits
+    - gocognit
     - goconst
-    - gocritic
     - gocyclo
+    - godot
+    - godox
     - gofmt
+    - gofumpt
+    - goheader
     - goimports
-    - golint
+    - gomoddirectives
+    - gomodguard
     - goprintffuncname
     - gosec
     - gosimple
     - govet
+    - importas
     - ineffassign
-    - interfacer
     - lll
+    - makezero
     - misspell
     - nakedret
+    - nestif
+    - nilerr
+    - nlreturn
+    - noctx
     - nolintlint
+    - paralleltest
+    - prealloc
+    - predeclared
+    - promlinter
+    - revive
     - rowserrcheck
-    - scopelint
+    - sqlclosecheck
     - staticcheck
-    - structcheck
     - stylecheck
-    - typecheck
+    - thelper
+    - tparallel
     - unconvert
     - unparam
     - unused
-    - varcheck
+    - wastedassign
     - whitespace
-    - asciicheck
-    - gocognit
-    - godot
-    - godox
-    - maligned
-    - nestif
-    - prealloc
-    - gomodguard
-  # don't enable:
-      #- goerr113
-      #- wsl
-      #- testpackage
-      #- exhaustive (TODO: enable after next release; current release at time of writing is v1.27)
-      #- gochecknoglobals
-      #- gomnd
+    - bidichk
+    - wastedassign
+    - execinquery
+    - nosprintfhostport
+    - grouper
+    - decorder
+    - errchkjson
+    - maintidx
+      #- containedctx
+      #- tagliatelle
+      #- nonamedreturns
+      #- nilnil
+      #- tenv
+      #- varnamelen
+      #- contextcheck
+      #- errname
+      #- ForceTypeAssert
+      #- nilassign
+  fast: false
 
 issues:
+  # List of regexps of issue texts to exclude, empty list by default.
+  # But independently from this option we use default exclude patterns,
+  # it can be disabled by `exclude-use-default: false`. To list all
+  # excluded by default patterns execute `golangci-lint run --help`
+  exclude:
+    - tools/.*
+    - test/.*
+    - third_party/.*
+
   # Excluding configuration per-path, per-linter, per-text and per-source
+  exclude-rules:
+    - linters:
+      - revive
+      path: (log/.*)\.go
+
+    - linters:
+      - wrapcheck
+      path: (cmd/.*|pkg/.*)\.go
+
+    - linters:
+      - typecheck
+        #path: (pkg/storage/.*)\.go
+      path: (internal/.*|pkg/.*)\.go
+
+    - path: (cmd/.*|test/.*|tools/.*|internal/pump/pumps/.*)\.go
+      linters:
+        - forbidigo
+
+    - path: (cmd/[a-z]*/.*|store/.*)\.go
+      linters:
+        - dupl
+
+    - linters:
+        - gocritic
+      text: (hugeParam:|rangeValCopy:)
+
+    - path: (cmd/[a-z]*/.*)\.go
+      linters:
+        - lll
+
+    - path: (validator/.*|code/.*|validator/.*|watcher/watcher/.*)
+      linters:
+        - gochecknoinits
+
+    - path: (internal/.*/options|internal/pump|pkg/log/options.go|internal/authzserver|tools/)
+      linters:
+        - tagliatelle
+
+    - path: (pkg/app/.*)\.go
+      linters:
+        - unused
+        - forbidigo
+
+    # Exclude some staticcheck messages
+    - linters:
+        - staticcheck
+      text: "SA9003:"
+
+    # Exclude lll issues for long lines with go:generate
+    - linters:
+        - lll
+      source: "^//go:generate "
 
   # Independently from option `exclude` we use default exclude patterns,
   # it can be disabled by this option. To list all
@@ -300,24 +887,27 @@ issues:
   # Show only new issues created in git patch with set file path.
   #new-from-patch: path/to/patch/file
 
+  # Fix found issues (if it's supported by the linter)
+  fix: true
+
 severity:
   # Default value is empty string.
-  # Set the default severity for issues. If severity rules are defined and the issues 
-  # do not match or no severity is provided to the rule this will be the default 
-  # severity applied. Severities should match the supported severity names of the 
+  # Set the default severity for issues. If severity rules are defined and the issues
+  # do not match or no severity is provided to the rule this will be the default
+  # severity applied. Severities should match the supported severity names of the
   # selected out format.
   # - Code climate: https://docs.codeclimate.com/docs/issues#issue-severity
   # -   Checkstyle: https://checkstyle.sourceforge.io/property_types.html#severity
   # -       Github: https://help.github.com/en/actions/reference/workflow-commands-for-github-actions#setting-an-error-message
   default-severity: error
 
-  # The default value is false. 
+  # The default value is false.
   # If set to true severity-rules regular expressions become case sensitive.
   case-sensitive: false
 
   # Default value is empty list.
   # When a list of severity rules are provided, severity information will be added to lint
-  # issues. Severity rules have the same filtering capability as exclude rules except you 
+  # issues. Severity rules have the same filtering capability as exclude rules except you
   # are allowed to specify one matcher per severity rule.
   # Only affects out formats that support setting severity information.
   rules:

.idea/Open-IM-Server.iml

@@ -1,9 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<module type="WEB_MODULE" version="4">
-  <component name="Go" enabled="true" />
-  <component name="NewModuleRootManager">
-    <content url="file://$MODULE_DIR$" />
-    <orderEntry type="inheritedJdk" />
-    <orderEntry type="sourceFolder" forTests="false" />
-  </component>
-</module>

.idea/dataSources.xml

@@ -1,14 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<project version="4">
-  <component name="DataSourceManagerImpl" format="xml" multifile-model="true">
-    <data-source source="LOCAL" name="grafana" uuid="95aae14a-3593-4ff7-ab49-5e4316cbecd1">
-      <driver-ref>sqlite.xerial</driver-ref>
-      <synchronize>true</synchronize>
-      <jdbc-driver>org.sqlite.JDBC</jdbc-driver>
-      <jdbc-url>jdbc:sqlite:C:\Users\Administrator\Desktop\Open-IM-Server\docker-compose_cfg\grafana.db</jdbc-url>
-      <driver-properties>
-        <property name="enable_load_extension" value="true" />
-      </driver-properties>
-    </data-source>
-  </component>
-</project>

.idea/misc.xml

@@ -1,6 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<project version="4">
-  <component name="JavaScriptSettings">
-    <option name="languageLevel" value="ES6" />
-  </component>
-</project>

.idea/modules.xml

@@ -1,8 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<project version="4">
-  <component name="ProjectModuleManager">
-    <modules>
-      <module fileurl="file://$PROJECT_DIR$/.idea/Open-IM-Server.iml" filepath="$PROJECT_DIR$/.idea/Open-IM-Server.iml" />
-    </modules>
-  </component>
-</project>

.idea/vcs.xml

@@ -1,6 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<project version="4">
-  <component name="VcsDirectoryMappings">
-    <mapping directory="" vcs="Git" />
-  </component>
-</project>

CHANGELOG.md

@@ -0,0 +1 @@
+CHANGELOG/CHANGELOG.md

CHANGELOG/.chglog/CHANGELOG.tpl.md

@@ -1,40 +1,62 @@
+# Version logging for OpenIM
+
+<!-- BEGIN MUNGE: GENERATED_TOC -->
+
+<!-- END MUNGE: GENERATED_TOC -->
+
+{{ if .Versions -}}
+<a name="unreleased"></a>
+## [Unreleased]
+
+{{ if .Unreleased.CommitGroups -}}
+{{ range .Unreleased.CommitGroups -}}
+### {{ .Title }}
+{{ range .Commits -}}
+- {{ if .Scope }}**{{ .Scope }}:** {{ end }}{{ .Subject }}
+{{ end }}
+{{ end -}}
+{{ end -}}
+{{ end -}}
+
 {{ range .Versions }}
 <a name="{{ .Tag.Name }}"></a>
-## {{ if .Tag.Previous }}[{{ .Tag.Name }}]({{ $.Info.RepositoryURL }}/compare/{{ .Tag.Previous.Name }}...{{ .Tag.Name }}){{ else }}{{ .Tag.Name }}{{ end }}
-
-> {{ datetime "2006-01-02" .Tag.Date }}
-
+## {{ if .Tag.Previous }}[{{ .Tag.Name }}]{{ else }}{{ .Tag.Name }}{{ end }} - {{ datetime "2006-01-02" .Tag.Date }}
 {{ range .CommitGroups -}}
 ### {{ .Title }}
-
 {{ range .Commits -}}
-* {{ if .Scope }}**{{ .Scope }}:** {{ end }}{{ .Subject }}
+- {{ if .Scope }}**{{ .Scope }}:** {{ end }}{{ .Subject }}
 {{ end }}
 {{ end -}}
 
 {{- if .RevertCommits -}}
 ### Reverts
-
 {{ range .RevertCommits -}}
-* {{ .Revert.Header }}
+- {{ .Revert.Header }}
 {{ end }}
 {{ end -}}
 
 {{- if .MergeCommits -}}
 ### Pull Requests
-
 {{ range .MergeCommits -}}
-* {{ .Header }}
+- {{ .Header }}
 {{ end }}
 {{ end -}}
 
 {{- if .NoteGroups -}}
 {{ range .NoteGroups -}}
 ### {{ .Title }}
-
 {{ range .Notes }}
 {{ .Body }}
 {{ end }}
 {{ end -}}
 {{ end -}}
+{{ end -}}
+
+{{- if .Versions }}
+[Unreleased]: {{ .Info.RepositoryURL }}/compare/{{ $latest := index .Versions 0 }}{{ $latest.Tag.Name }}...HEAD
+{{ range .Versions -}}
+{{ if .Tag.Previous -}}
+[{{ .Tag.Name }}]: {{ $.Info.RepositoryURL }}/compare/{{ .Tag.Previous.Name }}...{{ .Tag.Name }}
+{{ end -}}
+{{ end -}}
 {{ end -}}

CHANGELOG/.chglog/config.yml

@@ -1,28 +1,67 @@
+bin: git
 style: github
 template: CHANGELOG.tpl.md
 info:
   title: CHANGELOG
   repository_url: https://github.com/OpenIMSDK/Open-IM-Server
 options:
+  tag_filter_pattern: '^v'
+  sort: "date"
+
   commits:
-    # filters:
-    #   Type:
-    #     - feat
-    #     - fix
-    #     - perf
-    #     - refactor
+    filters:
+      Type:
+        - feat
+        - fix
+        - perf
+        - refactor
+        - docs
+        - test
+        - chore
+        - ci
+        - build
+    sort_by: Scope
+
   commit_groups:
-    # title_maps:
-    #   feat: Features
-    #   fix: Bug Fixes
-    #   perf: Performance Improvements
-    #   refactor: Code Refactoring
+    group_by: Type
+    sort_by: Title
+    title_order:
+      - feat
+      - fix
+      - perf
+      - refactor
+      - docs
+      - test
+      - chore
+      - ci
+      - build
+    title_maps:
+      feat: Features
+
   header:
-    pattern: "^(\\w*)(?:\\(([\\w\\$\\.\\-\\*\\s]*)\\))?\\:\\s(.*)$"
+    pattern: "<regexp>"
     pattern_maps:
-      - Type
-      - Scope
-      - Subject
+      - PropName
+
+  issues:
+    prefix:
+      - #
+
+  refs:
+    actions:
+      - Closes
+      - Fixes
+
+  merges:
+    pattern: "^Merge branch '(\\w+)'$"
+    pattern_maps:
+      - Source
+
+  reverts:
+    pattern: "^Revert \"([\\s\\S]*)\"$"
+    pattern_maps:
+      - Header
+
   notes:
     keywords:
       - BREAKING CHANGE

CHANGELOG/CHANGELOG-0.0.0.md

@@ -1,228 +0,0 @@
-
-<a name="v2.3.3"></a>
-## [v2.3.3](https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.3.2...v2.3.3)
-
-> 2022-09-18
-
-
-<a name="v2.3.2"></a>
-## [v2.3.2](https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.3.0-rc2...v2.3.2)
-
-> 2022-09-09
-
-### GetSelfUserInfo
-
-* Handle the case where the user does not exist
-
-### Pull Requests
-
-* Merge pull request [#267](https://github.com/OpenIMSDK/Open-IM-Server/issues/267) from ouyangshi/del
-* Merge pull request [#265](https://github.com/OpenIMSDK/Open-IM-Server/issues/265) from ouyangshi/del
-* Merge pull request [#252](https://github.com/OpenIMSDK/Open-IM-Server/issues/252) from x-shadow-man/config-perf
-* Merge pull request [#263](https://github.com/OpenIMSDK/Open-IM-Server/issues/263) from ouyangshi/main
-* Merge pull request [#258](https://github.com/OpenIMSDK/Open-IM-Server/issues/258) from ouyangshi/main
-* Merge pull request [#261](https://github.com/OpenIMSDK/Open-IM-Server/issues/261) from ouyangshi/v2.3.0release
-
-
-<a name="v2.3.0-rc2"></a>
-## [v2.3.0-rc2](https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.3.0-rc1...v2.3.0-rc2)
-
-> 2022-07-29
-
-
-<a name="v2.3.0-rc1"></a>
-## [v2.3.0-rc1](https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.3.0-rc0...v2.3.0-rc1)
-
-> 2022-07-25
-
-
-<a name="v2.3.0-rc0"></a>
-## [v2.3.0-rc0](https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.2.0...v2.3.0-rc0)
-
-> 2022-07-15
-
-
-<a name="v2.2.0"></a>
-## [v2.2.0](https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.1.0...v2.2.0)
-
-> 2022-07-01
-
-
-<a name="v2.1.0"></a>
-## [v2.1.0](https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.0.10...v2.1.0)
-
-> 2022-06-17
-
-
-<a name="v2.0.10"></a>
-## [v2.0.10](https://github.com/OpenIMSDK/Open-IM-Server/compare/list...v2.0.10)
-
-> 2022-05-13
-
-
-<a name="list"></a>
-## [list](https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.0.9...list)
-
-> 2022-04-29
-
-
-<a name="v2.0.9"></a>
-## [v2.0.9](https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.0.7...v2.0.9)
-
-> 2022-04-29
-
-### Reverts
-
-* update etcd to v3.5.2 ([#206](https://github.com/OpenIMSDK/Open-IM-Server/issues/206))
-
-
-<a name="v2.0.7"></a>
-## [v2.0.7](https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.0.6...v2.0.7)
-
-> 2022-04-08
-
-
-<a name="v2.0.6"></a>
-## [v2.0.6](https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.0.5...v2.0.6)
-
-> 2022-04-01
-
-### Fix
-
-* json tag value of UserIDResult.UserID ([#178](https://github.com/OpenIMSDK/Open-IM-Server/issues/178))
-
-### Pull Requests
-
-* Merge pull request [#173](https://github.com/OpenIMSDK/Open-IM-Server/issues/173) from OpenIMSDK/tuoyun
-
-
-<a name="v2.0.5"></a>
-## [v2.0.5](https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.04...v2.0.5)
-
-> 2022-03-24
-
-
-<a name="v2.04"></a>
-## [v2.04](https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.0.3...v2.04)
-
-> 2022-03-18
-
-
-<a name="v2.0.3"></a>
-## [v2.0.3](https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.0.2...v2.0.3)
-
-> 2022-03-11
-
-
-<a name="v2.0.2"></a>
-## [v2.0.2](https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.0.1...v2.0.2)
-
-> 2022-03-04
-
-### Version
-
-* "3"
-* "2"
-
-
-<a name="v2.0.1"></a>
-## [v2.0.1](https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.0.0...v2.0.1)
-
-> 2022-02-25
-
-### DbMysqlDatabaseName
-
-* openIM_v2
-
-
-<a name="v2.0.0"></a>
-## [v2.0.0](https://github.com/OpenIMSDK/Open-IM-Server/compare/v1.0.7...v2.0.0)
-
-> 2022-02-23
-
-### Pb
-
-* open_im_sdk.OfflinePushInfo
-
-### Pull Requests
-
-* Merge pull request [#131](https://github.com/OpenIMSDK/Open-IM-Server/issues/131) from OpenIMSDK/cms-dev
-
-
-<a name="v1.0.7"></a>
-## [v1.0.7](https://github.com/OpenIMSDK/Open-IM-Server/compare/v1.0.6...v1.0.7)
-
-> 2021-12-17
-
-
-<a name="v1.0.6"></a>
-## [v1.0.6](https://github.com/OpenIMSDK/Open-IM-Server/compare/v1.0.5...v1.0.6)
-
-> 2021-12-10
-
-### Pb
-
-* open_im_sdk.OfflinePushInfo
-
-
-<a name="v1.0.5"></a>
-## [v1.0.5](https://github.com/OpenIMSDK/Open-IM-Server/compare/v1.0.4...v1.0.5)
-
-> 2021-12-03
-
-
-<a name="v1.0.4"></a>
-## [v1.0.4](https://github.com/OpenIMSDK/Open-IM-Server/compare/v1.0.3...v1.0.4)
-
-> 2021-11-25
-
-
-<a name="v1.0.3"></a>
-## [v1.0.3](https://github.com/OpenIMSDK/Open-IM-Server/compare/v1.0.1...v1.0.3)
-
-> 2021-11-12
-
-### Feat
-
-* test utils ([#26](https://github.com/OpenIMSDK/Open-IM-Server/issues/26))
-
-### Fix
-
-* Startup error ([#11](https://github.com/OpenIMSDK/Open-IM-Server/issues/11))
-
-### Pull Requests
-
-* Merge pull request [#12](https://github.com/OpenIMSDK/Open-IM-Server/issues/12) from njulk/main
-* Merge pull request [#9](https://github.com/OpenIMSDK/Open-IM-Server/issues/9) from xmcy0011/dev
-* Merge pull request [#6](https://github.com/OpenIMSDK/Open-IM-Server/issues/6) from Bloomingg/int
-
-
-<a name="v1.0.1"></a>
-## [v1.0.1](https://github.com/OpenIMSDK/Open-IM-Server/compare/v1.0.0...v1.0.1)
-
-> 2021-11-04
-
-
-<a name="v1.0.0"></a>
-## v1.0.0
-
-> 2021-10-28
-
-### Ci
-
-* ignore files created by docker-compose ([#19](https://github.com/OpenIMSDK/Open-IM-Server/issues/19))
-
-### Feat
-
-* optimise get server ip ([#20](https://github.com/OpenIMSDK/Open-IM-Server/issues/20))
-
-### Reverts
-
-* friend modify
-* update
-
-### Pull Requests
-
-* Merge pull request [#7](https://github.com/OpenIMSDK/Open-IM-Server/issues/7) from memory-qianxiao/docker-compose_update
-* Merge pull request [#4](https://github.com/OpenIMSDK/Open-IM-Server/issues/4) from wujingke/patch-1
-

CHANGELOG/CHANGELOG-1.0.md

@@ -0,0 +1,56 @@
+# Version logging for OpenIM
+
+> **Note**:
+> Deprecated version logging for OpenIM, please refer to [CHANGELOG.md](../CHANGELOG.md)
+
+<!-- BEGIN MUNGE: GENERATED_TOC -->
+
+- [Version logging for OpenIM](#version-logging-for-openim)
+  - [Unreleased](#unreleased)
+  - [v1.0.7 - 2021-12-17](#v107---2021-12-17)
+  - [v1.0.6 - 2021-12-10](#v106---2021-12-10)
+  - [v1.0.5 - 2021-12-03](#v105---2021-12-03)
+  - [v1.0.4 - 2021-11-25](#v104---2021-11-25)
+  - [v1.0.3 - 2021-11-12](#v103---2021-11-12)
+  - [v1.0.1 - 2021-11-04](#v101---2021-11-04)
+  - [v1.0.0 - 2021-10-28](#v100---2021-10-28)
+    - [Reverts](#reverts)
+
+<!-- END MUNGE: GENERATED_TOC -->
+
+<a name="unreleased"></a>
+## [Unreleased]
+
+
+<a name="v1.0.7"></a>
+## [v1.0.7] - 2021-12-17
+
+<a name="v1.0.6"></a>
+## [v1.0.6] - 2021-12-10
+
+<a name="v1.0.5"></a>
+## [v1.0.5] - 2021-12-03
+
+<a name="v1.0.4"></a>
+## [v1.0.4] - 2021-11-25
+
+<a name="v1.0.3"></a>
+## [v1.0.3] - 2021-11-12
+
+<a name="v1.0.1"></a>
+## [v1.0.1] - 2021-11-04
+
+<a name="v1.0.0"></a>
+## v1.0.0 - 2021-10-28
+### Reverts
+- friend modify
+- update
+
+
+[Unreleased]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v1.0.7...HEAD
+[v1.0.7]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v1.0.6...v1.0.7
+[v1.0.6]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v1.0.5...v1.0.6
+[v1.0.5]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v1.0.4...v1.0.5
+[v1.0.4]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v1.0.3...v1.0.4
+[v1.0.3]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v1.0.1...v1.0.3
+[v1.0.1]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v1.0.0...v1.0.1

CHANGELOG/CHANGELOG-2.0.md

@@ -0,0 +1,87 @@
+# Version logging for OpenIM
+
+<!-- BEGIN MUNGE: GENERATED_TOC -->
+
+<!-- END MUNGE: GENERATED_TOC -->
+
+<a name="unreleased"></a>
+## [Unreleased]
+
+
+<a name="v2.0.10"></a>
+## [v2.0.10] - 2022-05-13
+
+<a name="v2.0.9"></a>
+## [v2.0.9] - 2022-04-29
+### Reverts
+- update etcd to v3.5.2 ([#206](https://github.com/OpenIMSDK/Open-IM-Server/issues/206))
+
+### Pull Requests
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+
+
+<a name="v2.0.8"></a>
+## [v2.0.8] - 2022-04-24
+### Pull Requests
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+
+
+<a name="v2.0.7"></a>
+## [v2.0.7] - 2022-04-08
+### Pull Requests
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+
+
+<a name="v2.0.6"></a>
+## [v2.0.6] - 2022-04-01
+### Pull Requests
+- Merge branch 'tuoyun'
+
+
+<a name="v2.0.5"></a>
+## [v2.0.5] - 2022-03-24
+
+<a name="v2.04"></a>
+## [v2.04] - 2022-03-18
+
+<a name="v2.0.3"></a>
+## [v2.0.3] - 2022-03-11
+
+<a name="v2.0.2"></a>
+## [v2.0.2] - 2022-03-04
+### Pull Requests
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+
+
+<a name="v2.0.1"></a>
+## [v2.0.1] - 2022-02-25
+
+<a name="v2.0.0"></a>
+## v2.0.0 - 2022-02-23
+### Reverts
+- friend modify
+- update
+
+
+[Unreleased]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.0.10...HEAD
+[v2.0.10]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.0.9...v2.0.10
+[v2.0.9]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.0.8...v2.0.9
+[v2.0.8]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.0.7...v2.0.8
+[v2.0.7]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.0.6...v2.0.7
+[v2.0.6]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.0.5...v2.0.6
+[v2.0.5]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.04...v2.0.5
+[v2.04]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.0.3...v2.04
+[v2.0.3]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.0.2...v2.0.3
+[v2.0.2]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.0.1...v2.0.2
+[v2.0.1]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.0.0...v2.0.1

CHANGELOG/CHANGELOG-2.1.md

@@ -0,0 +1,50 @@
+# Version logging for OpenIM:v2.1
+
+> **Note**:
+> Deprecated version logging for OpenIM, please refer to [CHANGELOG.md](../CHANGELOG.md)
+
+<!-- BEGIN MUNGE: GENERATED_TOC -->
+
+- [Version logging for OpenIM:v2.1](#version-logging-for-openimv21)
+  - [Unreleased](#unreleased)
+  - [v2.1.0 - 2022-06-17](#v210---2022-06-17)
+    - [Reverts](#reverts)
+    - [Pull Requests](#pull-requests)
+
+
+<!-- END MUNGE: GENERATED_TOC -->
+
+<a name="unreleased"></a>
+## [Unreleased]
+
+
+<a name="v2.1.0"></a>
+## v2.1.0 - 2022-06-17
+### Reverts
+- update etcd to v3.5.2 ([#206](https://github.com/OpenIMSDK/Open-IM-Server/issues/206))
+- friend modify
+- update
+
+### Pull Requests
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+
+
+[Unreleased]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.1.0...HEAD

CHANGELOG/CHANGELOG-2.2.md

@@ -0,0 +1,50 @@
+# Version logging for OpenIM:v2.2
+
+> **Note**:
+> Deprecated version logging for OpenIM, please refer to [CHANGELOG.md](../CHANGELOG.md)
+
+<!-- BEGIN MUNGE: GENERATED_TOC -->
+
+- [Version logging for OpenIM:v2.2](#version-logging-for-openimv22)
+  - [Unreleased](#unreleased)
+  - [v2.2.0 - 2022-07-01](#v220---2022-07-01)
+    - [Reverts](#reverts)
+    - [Pull Requests](#pull-requests)
+
+
+<!-- END MUNGE: GENERATED_TOC -->
+
+<a name="unreleased"></a>
+## [Unreleased]
+
+
+<a name="v2.2.0"></a>
+## v2.2.0 - 2022-07-01
+### Reverts
+- update etcd to v3.5.2 ([#206](https://github.com/OpenIMSDK/Open-IM-Server/issues/206))
+- friend modify
+- update
+
+### Pull Requests
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+
+
+[Unreleased]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.2.0...HEAD

CHANGELOG/CHANGELOG-2.3.md

@@ -0,0 +1,70 @@
+# Version logging for OpenIM:v2.3
+
+> **Note**:
+> Deprecated version logging for OpenIM, please refer to [CHANGELOG.md](../CHANGELOG.md)
+
+<!-- BEGIN MUNGE: GENERATED_TOC -->
+
+- [Version logging for OpenIM:v2.3](#version-logging-for-openimv23)
+  - [Unreleased](#unreleased)
+  - [v2.3.3 - 2022-09-18](#v233---2022-09-18)
+  - [v2.3.2 - 2022-09-09](#v232---2022-09-09)
+  - [v2.3.0-rc2 - 2022-07-29](#v230-rc2---2022-07-29)
+  - [v2.3.0-rc1 - 2022-07-25](#v230-rc1---2022-07-25)
+  - [v2.3.0-rc0 - 2022-07-15](#v230-rc0---2022-07-15)
+    - [Reverts](#reverts)
+    - [Pull Requests](#pull-requests)
+
+
+<!-- END MUNGE: GENERATED_TOC -->
+
+<a name="unreleased"></a>
+## [Unreleased]
+
+
+<a name="v2.3.3"></a>
+## [v2.3.3] - 2022-09-18
+
+<a name="v2.3.2"></a>
+## [v2.3.2] - 2022-09-09
+
+<a name="v2.3.0-rc2"></a>
+## [v2.3.0-rc2] - 2022-07-29
+
+<a name="v2.3.0-rc1"></a>
+## [v2.3.0-rc1] - 2022-07-25
+
+<a name="v2.3.0-rc0"></a>
+## v2.3.0-rc0 - 2022-07-15
+### Reverts
+- update etcd to v3.5.2 ([#206](https://github.com/OpenIMSDK/Open-IM-Server/issues/206))
+- friend modify
+- update
+
+### Pull Requests
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+
+
+[Unreleased]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.3.3...HEAD
+[v2.3.3]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.3.2...v2.3.3
+[v2.3.2]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.3.0-rc2...v2.3.2
+[v2.3.0-rc2]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.3.0-rc1...v2.3.0-rc2
+[v2.3.0-rc1]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.3.0-rc0...v2.3.0-rc1

CHANGELOG/CHANGELOG-2.9.md

@@ -0,0 +1,52 @@
+# Version logging for OpenIM
+
+<!-- BEGIN MUNGE: GENERATED_TOC -->
+
+- [Version logging for OpenIM](#version-logging-for-openim)
+  - [Unreleased](#unreleased)
+  - [v2.9.0+1.839643f - 2023-07-07](#v2901839643f---2023-07-07)
+  - [v2.9.0+2.35f07fe - 2023-07-06](#v290235f07fe---2023-07-06)
+  - [v2.9.0+1.b5072b1 - 2023-07-05](#v2901b5072b1---2023-07-05)
+  - [v2.9.0+3.2667a3a - 2023-07-05](#v29032667a3a---2023-07-05)
+  - [v2.9.0+7.04818ca - 2023-07-05](#v290704818ca---2023-07-05)
+  - [v2.9.0 - 2023-07-04](#v290---2023-07-04)
+    - [Reverts](#reverts)
+    - [Pull Requests](#pull-requests)
+
+
+<!-- END MUNGE: GENERATED_TOC -->
+
+<a name="unreleased"></a>
+## [Unreleased]
+
+
+<a name="v2.9.0+1.839643f"></a>
+## [v2.9.0+1.839643f] - 2023-07-07
+
+<a name="v2.9.0+2.35f07fe"></a>
+## [v2.9.0+2.35f07fe] - 2023-07-06
+
+<a name="v2.9.0+1.b5072b1"></a>
+## [v2.9.0+1.b5072b1] - 2023-07-05
+
+<a name="v2.9.0+3.2667a3a"></a>
+## [v2.9.0+3.2667a3a] - 2023-07-05
+
+<a name="v2.9.0+7.04818ca"></a>
+## [v2.9.0+7.04818ca] - 2023-07-05
+
+<a name="v2.9.0"></a>
+## v2.9.0 - 2023-07-04
+### Reverts
+- update etcd to v3.5.2 ([#206](https://github.com/OpenIMSDK/Open-IM-Server/issues/206))
+
+### Pull Requests
+- Merge branch 'tuoyun'
+
+
+[Unreleased]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.9.0+1.839643f...HEAD
+[v2.9.0+1.839643f]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.9.0+2.35f07fe...v2.9.0+1.839643f
+[v2.9.0+2.35f07fe]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.9.0+1.b5072b1...v2.9.0+2.35f07fe
+[v2.9.0+1.b5072b1]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.9.0+3.2667a3a...v2.9.0+1.b5072b1
+[v2.9.0+3.2667a3a]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.9.0+7.04818ca...v2.9.0+3.2667a3a
+[v2.9.0+7.04818ca]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.9.0...v2.9.0+7.04818ca

CHANGELOG/CHANGELOG-3.0.md

@@ -0,0 +1,188 @@
+# Version logging for OpenIM
+
+<!-- BEGIN MUNGE: GENERATED_TOC -->
+- [Version logging for OpenIM](#version-logging-for-openim)
+  - [Unreleased](#unreleased)
+  - [v2.9.0 - 2023-07-04](#v290---2023-07-04)
+    - [Reverts](#reverts)
+    - [Pull Requests](#pull-requests)
+  - [v2.3.3 - 2022-09-18](#v233---2022-09-18)
+  - [v2.3.2 - 2022-09-09](#v232---2022-09-09)
+  - [v2.3.0-rc2 - 2022-07-29](#v230-rc2---2022-07-29)
+  - [v2.3.0-rc1 - 2022-07-25](#v230-rc1---2022-07-25)
+  - [v2.3.0-rc0 - 2022-07-15](#v230-rc0---2022-07-15)
+  - [v2.2.0 - 2022-07-01](#v220---2022-07-01)
+  - [v2.1.0 - 2022-06-17](#v210---2022-06-17)
+    - [Pull Requests](#pull-requests-1)
+  - [v2.0.10 - 2022-05-13](#v2010---2022-05-13)
+  - [v2.0.9 - 2022-04-29](#v209---2022-04-29)
+    - [Reverts](#reverts-1)
+    - [Pull Requests](#pull-requests-2)
+  - [v2.0.7 - 2022-04-08](#v207---2022-04-08)
+    - [Pull Requests](#pull-requests-3)
+  - [v2.0.6 - 2022-04-01](#v206---2022-04-01)
+    - [Pull Requests](#pull-requests-4)
+  - [v2.0.5 - 2022-03-24](#v205---2022-03-24)
+  - [v2.04 - 2022-03-18](#v204---2022-03-18)
+  - [v2.0.3 - 2022-03-11](#v203---2022-03-11)
+  - [v2.0.2 - 2022-03-04](#v202---2022-03-04)
+    - [Pull Requests](#pull-requests-5)
+  - [v2.0.1 - 2022-02-25](#v201---2022-02-25)
+  - [v2.0.0 - 2022-02-23](#v200---2022-02-23)
+  - [v1.0.7 - 2021-12-17](#v107---2021-12-17)
+  - [v1.0.6 - 2021-12-10](#v106---2021-12-10)
+  - [v1.0.5 - 2021-12-03](#v105---2021-12-03)
+  - [v1.0.4 - 2021-11-25](#v104---2021-11-25)
+  - [v1.0.3 - 2021-11-12](#v103---2021-11-12)
+  - [v1.0.1 - 2021-11-04](#v101---2021-11-04)
+  - [v1.0.0 - 2021-10-28](#v100---2021-10-28)
+    - [Reverts](#reverts-2)
+
+<!-- END MUNGE: GENERATED_TOC -->
+
+<a name="unreleased"></a>
+## [Unreleased]
+
+
+<a name="v2.9.0"></a>
+## [v2.9.0] - 2023-07-04
+### Reverts
+- update etcd to v3.5.2 ([#206](https://github.com/OpenIMSDK/Open-IM-Server/issues/206))
+
+### Pull Requests
+- Merge branch 'tuoyun'
+
+
+<a name="v2.3.3"></a>
+## [v2.3.3] - 2022-09-18
+
+<a name="v2.3.2"></a>
+## [v2.3.2] - 2022-09-09
+
+<a name="v2.3.0-rc2"></a>
+## [v2.3.0-rc2] - 2022-07-29
+
+<a name="v2.3.0-rc1"></a>
+## [v2.3.0-rc1] - 2022-07-25
+
+<a name="v2.3.0-rc0"></a>
+## [v2.3.0-rc0] - 2022-07-15
+
+<a name="v2.2.0"></a>
+## [v2.2.0] - 2022-07-01
+
+<a name="v2.1.0"></a>
+## [v2.1.0] - 2022-06-17
+### Pull Requests
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+
+
+<a name="v2.0.10"></a>
+## [v2.0.10] - 2022-05-13
+
+<a name="v2.0.9"></a>
+## [v2.0.9] - 2022-04-29
+### Reverts
+- update etcd to v3.5.2 ([#206](https://github.com/OpenIMSDK/Open-IM-Server/issues/206))
+
+### Pull Requests
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+
+
+<a name="v2.0.7"></a>
+## [v2.0.7] - 2022-04-08
+### Pull Requests
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+
+
+<a name="v2.0.6"></a>
+## [v2.0.6] - 2022-04-01
+### Pull Requests
+- Merge branch 'tuoyun'
+
+
+<a name="v2.0.5"></a>
+## [v2.0.5] - 2022-03-24
+
+<a name="v2.04"></a>
+## [v2.04] - 2022-03-18
+
+<a name="v2.0.3"></a>
+## [v2.0.3] - 2022-03-11
+
+<a name="v2.0.2"></a>
+## [v2.0.2] - 2022-03-04
+### Pull Requests
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+
+
+<a name="v2.0.1"></a>
+## [v2.0.1] - 2022-02-25
+
+<a name="v2.0.0"></a>
+## [v2.0.0] - 2022-02-23
+
+<a name="v1.0.7"></a>
+## [v1.0.7] - 2021-12-17
+
+<a name="v1.0.6"></a>
+## [v1.0.6] - 2021-12-10
+
+<a name="v1.0.5"></a>
+## [v1.0.5] - 2021-12-03
+
+<a name="v1.0.4"></a>
+## [v1.0.4] - 2021-11-25
+
+<a name="v1.0.3"></a>
+## [v1.0.3] - 2021-11-12
+
+<a name="v1.0.1"></a>
+## [v1.0.1] - 2021-11-04
+
+<a name="v1.0.0"></a>
+## v1.0.0 - 2021-10-28
+### Reverts
+- friend modify
+- update
+
+
+[Unreleased]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.9.0...HEAD
+[v2.9.0]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.3.3...v2.9.0
+[v2.3.3]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.3.2...v2.3.3
+[v2.3.2]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.3.0-rc2...v2.3.2
+[v2.3.0-rc2]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.3.0-rc1...v2.3.0-rc2
+[v2.3.0-rc1]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.3.0-rc0...v2.3.0-rc1
+[v2.3.0-rc0]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.2.0...v2.3.0-rc0
+[v2.2.0]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.1.0...v2.2.0
+[v2.1.0]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.0.10...v2.1.0
+[v2.0.10]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.0.9...v2.0.10
+[v2.0.9]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.0.7...v2.0.9
+[v2.0.7]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.0.6...v2.0.7
+[v2.0.6]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.0.5...v2.0.6
+[v2.0.5]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.04...v2.0.5
+[v2.04]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.0.3...v2.04
+[v2.0.3]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.0.2...v2.0.3
+[v2.0.2]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.0.1...v2.0.2
+[v2.0.1]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.0.0...v2.0.1
+[v2.0.0]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v1.0.7...v2.0.0
+[v1.0.7]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v1.0.6...v1.0.7
+[v1.0.6]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v1.0.5...v1.0.6
+[v1.0.5]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v1.0.4...v1.0.5
+[v1.0.4]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v1.0.3...v1.0.4
+[v1.0.3]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v1.0.1...v1.0.3
+[v1.0.1]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v1.0.0...v1.0.1

CHANGELOG/CHANGELOG-3.1.md

@@ -0,0 +1,87 @@
+# Version logging for OpenIM
+
+<!-- BEGIN MUNGE: GENERATED_TOC -->
+
+- [Version logging for OpenIM](#version-logging-for-openim)
+  - [Unreleased](#unreleased)
+  - [v3.1.2-beta.3 - 2023-08-09](#v312-beta3---2023-08-09)
+  - [v3.1.2-beta.2 - 2023-08-09](#v312-beta2---2023-08-09)
+  - [v3.1.2-beta.1 - 2023-08-09](#v312-beta1---2023-08-09)
+  - [v3.1.2-beta.0 - 2023-08-08](#v312-beta0---2023-08-08)
+  - [v3.1.2.beta.0 - 2023-08-08](#v312beta0---2023-08-08)
+  - [v3.1.1-beta.4 - 2023-08-07](#v311-beta4---2023-08-07)
+  - [v3.1.1-beta.3 - 2023-08-05](#v311-beta3---2023-08-05)
+  - [v3.1.1-beta.2 - 2023-08-04](#v311-beta2---2023-08-04)
+  - [v3.1.1-beta.1 - 2023-08-04](#v311-beta1---2023-08-04)
+  - [v3.1.1-alpha.3 - 2023-08-03](#v311-alpha3---2023-08-03)
+  - [v3.1.1-alpha.2 - 2023-08-03](#v311-alpha2---2023-08-03)
+  - [v3.1.1-alpha.1 - 2023-08-02](#v311-alpha1---2023-08-02)
+  - [v3.1.0 - 2023-07-28](#v310---2023-07-28)
+    - [Reverts](#reverts)
+    - [Pull Requests](#pull-requests)
+
+
+<!-- END MUNGE: GENERATED_TOC -->
+
+<a name="unreleased"></a>
+## [Unreleased]
+
+
+<a name="v3.1.2-beta.3"></a>
+## [v3.1.2-beta.3] - 2023-08-09
+
+<a name="v3.1.2-beta.2"></a>
+## [v3.1.2-beta.2] - 2023-08-09
+
+<a name="v3.1.2-beta.1"></a>
+## [v3.1.2-beta.1] - 2023-08-09
+
+<a name="v3.1.2-beta.0"></a>
+## [v3.1.2-beta.0] - 2023-08-08
+
+<a name="v3.1.2.beta.0"></a>
+## [v3.1.2.beta.0] - 2023-08-08
+
+<a name="v3.1.1-beta.4"></a>
+## [v3.1.1-beta.4] - 2023-08-07
+
+<a name="v3.1.1-beta.3"></a>
+## [v3.1.1-beta.3] - 2023-08-05
+
+<a name="v3.1.1-beta.2"></a>
+## [v3.1.1-beta.2] - 2023-08-04
+
+<a name="v3.1.1-beta.1"></a>
+## [v3.1.1-beta.1] - 2023-08-04
+
+<a name="v3.1.1-alpha.3"></a>
+## [v3.1.1-alpha.3] - 2023-08-03
+
+<a name="v3.1.1-alpha.2"></a>
+## [v3.1.1-alpha.2] - 2023-08-03
+
+<a name="v3.1.1-alpha.1"></a>
+## [v3.1.1-alpha.1] - 2023-08-02
+
+<a name="v3.1.0"></a>
+## v3.1.0 - 2023-07-28
+### Reverts
+- update etcd to v3.5.2 ([#206](https://github.com/OpenIMSDK/Open-IM-Server/issues/206))
+
+### Pull Requests
+- Merge branch 'tuoyun'
+
+
+[Unreleased]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v3.1.2-beta.3...HEAD
+[v3.1.2-beta.3]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v3.1.2-beta.2...v3.1.2-beta.3
+[v3.1.2-beta.2]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v3.1.2-beta.1...v3.1.2-beta.2
+[v3.1.2-beta.1]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v3.1.2-beta.0...v3.1.2-beta.1
+[v3.1.2-beta.0]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v3.1.2.beta.0...v3.1.2-beta.0
+[v3.1.2.beta.0]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v3.1.1-beta.4...v3.1.2.beta.0
+[v3.1.1-beta.4]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v3.1.1-beta.3...v3.1.1-beta.4
+[v3.1.1-beta.3]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v3.1.1-beta.2...v3.1.1-beta.3
+[v3.1.1-beta.2]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v3.1.1-beta.1...v3.1.1-beta.2
+[v3.1.1-beta.1]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v3.1.1-alpha.3...v3.1.1-beta.1
+[v3.1.1-alpha.3]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v3.1.1-alpha.2...v3.1.1-alpha.3
+[v3.1.1-alpha.2]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v3.1.1-alpha.1...v3.1.1-alpha.2
+[v3.1.1-alpha.1]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v3.1.0...v3.1.1-alpha.1

CHANGELOG/CHANGELOG-3.2.md

@@ -0,0 +1,44 @@
+# Version logging for OpenIM
+
+<!-- BEGIN MUNGE: GENERATED_TOC -->
+
+<!-- END MUNGE: GENERATED_TOC -->
+
+<a name="unreleased"></a>
+## [Unreleased]
+
+
+<a name="v3.2.2-beta.3"></a>
+## [v3.2.2-beta.3] - 2023-08-22
+
+<a name="v3.2.2-beta.2"></a>
+## [v3.2.2-beta.2] - 2023-08-21
+
+<a name="v3.2.2-beta.1"></a>
+## [v3.2.2-beta.1] - 2023-08-19
+
+<a name="v3.2.0"></a>
+## [v3.2.0] - 2023-08-18
+
+<a name="v3.2.0-rc.0"></a>
+## [v3.2.0-rc.0] - 2023-08-17
+
+<a name="v3.2.2-beta.0"></a>
+## [v3.2.2-beta.0] - 2023-08-17
+
+<a name="v3.2.0-alpha.0"></a>
+## v3.2.0-alpha.0 - 2023-08-16
+### Reverts
+- update etcd to v3.5.2 ([#206](https://github.com/OpenIMSDK/Open-IM-Server/issues/206))
+
+### Pull Requests
+- Merge branch 'tuoyun'
+
+
+[Unreleased]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v3.2.2-beta.3...HEAD
+[v3.2.2-beta.3]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v3.2.2-beta.2...v3.2.2-beta.3
+[v3.2.2-beta.2]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v3.2.2-beta.1...v3.2.2-beta.2
+[v3.2.2-beta.1]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v3.2.0...v3.2.2-beta.1
+[v3.2.0]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v3.2.0-rc.0...v3.2.0
+[v3.2.0-rc.0]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v3.2.2-beta.0...v3.2.0-rc.0
+[v3.2.2-beta.0]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v3.2.0-alpha.0...v3.2.2-beta.0

CHANGELOG/CHANGELOG.md

@@ -1,3 +1,170 @@
 # Changelog
 
-All notable changes to this project will be documented in this file.
+- [Changelog](#changelog)
+  - [OpenIM versioning policy](#openim-versioning-policy)
+  - [command](#command)
+    - [install](#install)
+  - [User](#user)
+  - [create next tag](#create-next-tag)
+  - [Release version logs](#release-version-logs)
+  - [Introduction](#introduction)
+  - [Naming Format](#naming-format)
+  - [Examples](#examples)
+  - [Version Modifiers](#version-modifiers)
+  - [Versioning Strategy](#versioning-strategy)
+
+
+All notable changes to this project will be documented in this file.
+
++ [https://github.com/OpenIMSDK/Open-IM-Server/releases](https://github.com/OpenIMSDK/Open-IM-Server/releases)
+
+## OpenIM versioning policy
+
++ [OpenIM Version](../docs/conversions/version.md)
+
+## command
+
+To use git-chglog you need to configure:
+
+1. CHANGELOG templates
+2. git-chglog configuration
+
+### install 
+
+```bash
+$ go get github.com/git-chglog/git-chglog/cmd/git-chglog
+```
+
+
+## User
+
+```bash
+$ git-chglog --init
+```
+
+**Options**
+
+- What is the URL of your repository?: https://github.com/OpenIMSDK/Open-IM-Server
+- What is your favorite style?: github
+- Choose the format of your favorite commit message: <type>(<scope>): <subject> -- feat(core): Add new feature
+- What is your favorite template style?: standard
+- Do you include Merge Commit in CHANGELOG?: n
+- Do you include Revert Commit in CHANGELOG?: y
+- In which directory do you output configuration files and templates?: .chglog
+
+```bash
+git-chglog --tag-filter-pattern 'v2.0.*'  -o CHANGELOG-2.0.md
+```
+
+**Other uses:**
+
+```bash
+$ git-chglog
+
+  If <tag query> is not specified, it corresponds to all tags.
+  This is the simplest example.
+
+$ git-chglog 1.0.0..2.0.0
+
+  The above is a command to generate CHANGELOG including commit of 1.0.0 to 2.0.0.
+
+$ git-chglog 1.0.0
+
+  The above is a command to generate CHANGELOG including commit of only 1.0.0.
+
+$ git-chglog $(git describe --tags $(git rev-list --tags --max-count=1))
+
+  The above is a command to generate CHANGELOG with the commit included in the latest tag.
+
+$ git-chglog --output CHANGELOG.md
+
+  The above is a command to output to CHANGELOG.md instead of standard output.
+
+$ git-chglog --config custom/dir/config.yml
+
+  The above is a command that uses a configuration file placed other than ".chglog/config.yml".
+```
+
+
+## create next tag
+
+```bash
+git-chglog --next-tag 2.0.0 -o CHANGELOG.md
+git commit -am "release 2.0.0"
+git tag 2.0.0
+```
+
+| Query          | Description                                    | Example                     |
+| -------------- | ---------------------------------------------- | --------------------------- |
+| `<old>..<new>` | Commit contained in `<new>` tags from `<old>`. | `$ git-chglog 1.0.0..2.0.0` |
+| `<name>..`     | Commit from the `<name>` to the latest tag.    | `$ git-chglog 1.0.0..`      |
+| `..<name>`     | Commit from the oldest tag to `<name>`.        | `$ git-chglog ..2.0.0`      |
+| `<name>`       | Commit contained in `<name>`.                  | `$ git-chglog 1.0.0`        |
+
+
+## Release version logs
+
++ [OpenIM CHANGELOG-V1.0](CHANGELOG-1.0.md)
++ [OpenIM CHANGELOG-V2.0](CHANGELOG-2.0.md)
++ [OpenIM CHANGELOG-V2.1](CHANGELOG-2.1.md)
++ [OpenIM CHANGELOG-V2.2](CHANGELOG-2.2.md)
++ [OpenIM CHANGELOG-V2.3](CHANGELOG-2.3.md)
++ [OpenIM CHANGELOG-V2.9](CHANGELOG-2.9.md)
++ [OpenIM CHANGELOG-V3.0](CHANGELOG-3.0.md)
++ [OpenIM CHANGELOG-V3.1](CHANGELOG-3.1.md)
+
+## Introduction
+
+In both the open-source and closed-source software development communities, it is important to follow a consistent and understandable versioning scheme for software projects. This ensures clear communication of changes, compatibility, and stability across different releases. One widely adopted naming convention is the Semantic Versioning 2.0.0.
+
+## Naming Format
+
+The most common format for version numbers is as follows:
+
+```
+major.minor[.patch[.build]]
+```
+
+Let's take a closer look at each component:
+
+1. **Major Version**: This is the first number in the versioning scheme and indicates significant changes that may not be backward compatible (specific to each project).
+2. **Minor Version**: The second number signifies the addition of new features while maintaining backward compatibility.
+3. **Patch Version**: The third number represents bug fixes or code optimizations without introducing new features. It is generally backward compatible.
+4. **Build Version**: Typically an automatically generated number that increments with each code commit.
+
+## Examples
+
+Here are a few examples to illustrate the versioning scheme:
+
+1. `1.0`
+2. `2.14.0.1478`
+3. `3.2.1 build-354`
+
+## Version Modifiers
+
+Apart from the version numbers, there are also version modifiers used to indicate specific stages or statuses of a release. Some commonly used version modifiers include:
+
+- **alpha**: An internal testing version with numerous known bugs. It is primarily used for communication among developers.
+- **beta**: A testing version released to enthusiastic users for feedback and bug detection.
+- **rc (release candidate)**: The final testing version before the official release.
+- **ga (general availability)**: The initial stable release for public distribution.
+- **r/release** (or no modifier at all): The final released version intended for general users.
+- **lts (long-term support)**: Designates a version that will receive extended maintenance and bug fixes for a specified number of years.
+
+## Versioning Strategy
+
+To effectively manage version numbers, the following strategies are commonly employed:
+
+- The initial version of a project can be either `0.1` or `1.0`.
+- When fixing bugs, the patch version is incremented by 1.
+- When adding new features, the minor version is incremented by 1, and the patch version is reset to 0.
+- In the case of significant modifications, the major version is incremented by 1.
+- The build version is usually automatically generated by the compilation process and follows a defined format. It does not require manual control.
+
+By adhering to these strategies and guidelines, developers can maintain consistency and clarity in versioning their software projects. This enables users and collaborators to understand the nature of changes between different releases and ensure compatibility with their systems.
+
+(Note: Markdown formatting has been used to structure this article. Markdown is a lightweight markup language used to format text on platforms like GitHub.)
+
+------
+
+**Note**: The above article is based on the given content and aims to provide a Markdown-formatted English article explaining the naming conventions for software project versions, specifically focusing on the Semantic Versioning 2.0.0.

CODE_OF_CONDUCT.md

@@ -0,0 +1,128 @@
+# Contributor Covenant Code of Conduct
+
+## Our Pledge
+
+We as members, contributors, and leaders pledge to make participation in our
+community a harassment-free experience for everyone, regardless of age, body
+size, visible or invisible disability, ethnicity, sex characteristics, gender
+identity and expression, level of experience, education, socio-economic status,
+nationality, personal appearance, race, religion, or sexual identity
+and orientation.
+
+We pledge to act and interact in ways that contribute to an open, welcoming,
+diverse, inclusive, and healthy community.
+
+## Our Standards
+
+Examples of behavior that contributes to a positive environment for our
+community include:
+
+* Demonstrating empathy and kindness toward other people
+* Being respectful of differing opinions, viewpoints, and experiences
+* Giving and gracefully accepting constructive feedback
+* Accepting responsibility and apologizing to those affected by our mistakes,
+  and learning from the experience
+* Focusing on what is best not just for us as individuals, but for the
+  overall community
+
+Examples of unacceptable behavior include:
+
+* The use of sexualized language or imagery, and sexual attention or
+  advances of any kind
+* Trolling, insulting or derogatory comments, and personal or political attacks
+* Public or private harassment
+* Publishing others' private information, such as a physical or email
+  address, without their explicit permission
+* Other conduct which could reasonably be considered inappropriate in a
+  professional setting
+
+## Enforcement Responsibilities
+
+Community leaders are responsible for clarifying and enforcing our standards of
+acceptable behavior and will take appropriate and fair corrective action in
+response to any behavior that they deem inappropriate, threatening, offensive,
+or harmful.
+
+Community leaders have the right and responsibility to remove, edit, or reject
+comments, commits, code, wiki edits, issues, and other contributions that are
+not aligned to this Code of Conduct, and will communicate reasons for moderation
+decisions when appropriate.
+
+## Scope
+
+This Code of Conduct applies within all community spaces, and also applies when
+an individual is officially representing the community in public spaces.
+Examples of representing our community include using an official e-mail address,
+posting via an official social media account, or acting as an appointed
+representative at an online or offline event.
+
+## Enforcement
+
+Instances of abusive, harassing, or otherwise unacceptable behavior may be
+reported to the community leaders responsible for enforcement at
+3293172751nss@gmail.com.
+All complaints will be reviewed and investigated promptly and fairly.
+
+All community leaders are obligated to respect the privacy and security of the
+reporter of any incident.
+
+## Enforcement Guidelines
+
+Community leaders will follow these Community Impact Guidelines in determining
+the consequences for any action they deem in violation of this Code of Conduct:
+
+### 1. Correction
+
+**Community Impact**: Use of inappropriate language or other behavior deemed
+unprofessional or unwelcome in the community.
+
+**Consequence**: A private, written warning from community leaders, providing
+clarity around the nature of the violation and an explanation of why the
+behavior was inappropriate. A public apology may be requested.
+
+### 2. Warning
+
+**Community Impact**: A violation through a single incident or series
+of actions.
+
+**Consequence**: A warning with consequences for continued behavior. No
+interaction with the people involved, including unsolicited interaction with
+those enforcing the Code of Conduct, for a specified period of time. This
+includes avoiding interactions in community spaces as well as external channels
+like social media. Violating these terms may lead to a temporary or
+permanent ban.
+
+### 3. Temporary Ban
+
+**Community Impact**: A serious violation of community standards, including
+sustained inappropriate behavior.
+
+**Consequence**: A temporary ban from any sort of interaction or public
+communication with the community for a specified period of time. No public or
+private interaction with the people involved, including unsolicited interaction
+with those enforcing the Code of Conduct, is allowed during this period.
+Violating these terms may lead to a permanent ban.
+
+### 4. Permanent Ban
+
+**Community Impact**: Demonstrating a pattern of violation of community
+standards, including sustained inappropriate behavior,  harassment of an
+individual, or aggression toward or disparagement of classes of individuals.
+
+**Consequence**: A permanent ban from any sort of public interaction within
+the community.
+
+## Attribution
+
+This Code of Conduct is adapted from the [Contributor Covenant][homepage],
+version 2.0, available at
+https://www.contributor-covenant.org/version/2/0/code_of_conduct.html.
+
+Community Impact Guidelines were inspired by [Mozilla's code of conduct
+enforcement ladder](https://github.com/mozilla/diversity).
+
+[homepage]: https://www.contributor-covenant.org
+
+For answers to common questions about this code of conduct, see the FAQ at
+https://www.contributor-covenant.org/faq. Translations are available at
+https://www.contributor-covenant.org/translations.

CONTRIBUTING.md

@@ -4,17 +4,31 @@ So, you want to hack on Open-IM-Server? Yay!
 
 First of all, thank you for considering contributing to our project! We appreciate your time and effort, and we value any contribution, whether it's reporting a bug, suggesting a new feature, or submitting a pull request.
 
+![Hello OpenIM Image](assets/demo/hello-openim.png)
+
+> Use `make demo` start contributing fast.
+
 This document provides guidelines and best practices to help you contribute effectively.
 
 ## 📇Topics
 
-- [What we expect of you](#What-we-expect-of-you)
-- [Code of Conduct](#Code-of-Conduct)
-- [Getting Started](#Getting-Started)
-- [Style and Specification](#Style-and-Specification)
-- [Engage to help anything](#Engage-to-help-anything)
-- [Release version](#Release-version)
-- [Contact Us](#Contact-Us)
+- [Contributing to Open-IM-Server](#contributing-to-open-im-server)
+  - [📇Topics](#topics)
+  - [What we expect of you](#what-we-expect-of-you)
+  - [Code of ConductCode of Conduct](#code-of-conductcode-of-conduct)
+      - [Code and doc contribution](#code-and-doc-contribution)
+      - [Where should I start?](#where-should-i-start)
+      - [Design documents](#design-documents)
+  - [Getting Started](#getting-started)
+  - [Style and Specification](#style-and-specification)
+      - [Reporting security issues](#reporting-security-issues)
+      - [Reporting general issues](#reporting-general-issues)
+      - [Commit Rules](#commit-rules)
+      - [PR Description](#pr-description)
+      - [Docs Contribution](#docs-contribution)
+  - [Engage to help anything](#engage-to-help-anything)
+  - [Release version](#release-version)
+  - [Contact Us](#contact-us)
 
 ## What we expect of you
 
@@ -32,7 +46,7 @@ The [Makefile](./Makefile) is for every developer, even if you don't know how to
 
 #### Code and doc contribution
 
-Every action to make project Open-IM-Server better is encouraged. On GitHub, every improvement for Open-IM-Server could be via a [PR](https://github.com/Open-IM-Server/pulls) (short for pull request).
+Every action to make project Open-IM-Server better is encouraged. On GitHub, every improvement for Open-IM-Server could be via a [PR](https://github.com/OpenIMSDK/Open-IM-Server/pulls) (short for pull request).
 
 + If you find a typo, try to fix it!
 + If you find a bug, try to fix it!
@@ -48,7 +62,7 @@ Every action to make project Open-IM-Server better is encouraged. On GitHub, eve
 #### Where should I start?
 
 + If you are new to the project, don't know how to contribute Open-IM-Server, please check out the [good first issue](https://github.com/OpenIMSDK/Open-IM-Server/issues?q=is%3Aopen+label%3A"good+first+issue"+sort%3Aupdated-desc) label.
-+ You should be good at filtering the Open-IM-Server issue tags and finding the ones you like, such as [RFC](https://github.com/OpenIMSDK/Open-IM-Server/issues?q=is%3Aissue+is%3Aopen+RFC+label%3ARFC) for big initiatives, features for [feature](https://github.com/OpenIMSDK/Open-IM-Server/issues?q=is%3Aissue+label%3Afeature) proposals, and [bug](https://github.com/{github/issues?q=is%3Aissue+label%3Abug+) fixes.
++ You should be good at filtering the Open-IM-Server issue tags and finding the ones you like, such as [RFC](https://github.com/OpenIMSDK/Open-IM-Server/issues?q=is%3Aissue+is%3Aopen+RFC+label%3ARFC) for big initiatives, features for [feature](https://github.com/OpenIMSDK/Open-IM-Server/issues?q=is%3Aissue+label%3Afeature) proposals, and [bug](https://github.com/OpenIMSDK/Open-IM-Server/issues?q=is%3Aissue+label%3Abug+) fixes.
 + If you are looking for something to work on, check out our [open issues](https://github.com/OpenIMSDK/Open-IM-Server/issues?q=is%3Aissue+is%3Aopen+sort%3Aupdated-desc).
 + If you have an idea for a new feature, please [open an issue](https://github.com/OpenIMSDK/Open-IM-Server/issues/new/choose), and we can discuss it.
 
@@ -79,7 +93,7 @@ To propose PR for the Open-IM-Server item, we assume you have registered a GitHu
 
 1. Fork the repository(Open-IM-Server)
 
-2. **CLONE** your own repository to master locally. Use `git clone https://github.com/<your-username>/Open-IM-Server.git` to clone repository to your local machine. Then you can create new branches to finish the change you wish to make.
+2. **CLONE** your own repository to main locally. Use `git clone https://github.com/<your-username>/Open-IM-Server.git` to clone repository to your local machine. Then you can create new branches to finish the change you wish to make.
 
 3. **Set Remote** upstream to be `https://github.com/OpenIMSDK/Open-IM-Server.git` using the following two commands:
 
@@ -120,7 +134,7 @@ To propose PR for the Open-IM-Server item, we assume you have registered a GitHu
 
    ```bash
    ❯ git rebase upstream/main
-   ❯ make link	  # golangci-lint run -c .golangci.yml
+   ❯ make lint	  # golangci-lint run -c .golangci.yml
    ❯ git add -A  # add changes to staging
    ❯ git commit -a -s -m "message for your changes" # -s adds a Signed-off-by trailer
    ```
@@ -180,7 +194,7 @@ To be honest, we regard every user of Open-IM-Serveras a very kind contributor.
 
 Since we collaborate project Open-IM-Server in a distributed way, we appreciate **WELL-WRITTEN**, **DETAILED**, **EXPLICIT** issue reports. To make the communication more efficient, we wish everyone could search if your issue is an existing one in the searching list. If you find it existing, please add your details in comments under the existing issue instead of opening a brand new one.
 
-To make the issue details as standard as possible, we setup an [ISSUE TEMPLATE](https://github.com/OpenIMSDK/Open-IM-Server/tree/main/.github/ISSUE_TEMPLATE) for issue reporters. You can find three kinds of issue templates there: question, bug report and feature request. Please **BE SURE** to follow the instructions to fill fields in template.
+To make the issue details as standard as possible, we setup an [ISSUE TEMPLATE](https://github.com/OpenIMSDK/.github/tree/main/.github/ISSUE_TEMPLATE) for issue reporters. You can find three kinds of issue templates there: question, bug report and feature request. Please **BE SURE** to follow the instructions to fill fields in template.
 
 **There are a lot of cases when you could open an issue:**
 
@@ -242,7 +256,7 @@ An example for this could be:
 
 #### PR Description
 
-PR is the only way to make change to Open-IM-Server project files. To help reviewers better get your purpose, PR description could not be too detailed. We encourage contributors to follow the [PR template](https://github.com/OpenIMSDK/Open-IM-Server/tree/main/.github/PULL_REQUEST_TEMPLATE.md) to finish the pull request.
+PR is the only way to make change to Open-IM-Server project files. To help reviewers better get your purpose, PR description could not be too detailed. We encourage contributors to follow the [PR template](https://github.com/OpenIMSDK/.github/tree/main/.github/PULL_REQUEST_TEMPLATE.md) to finish the pull request.
 
 You can find some very formal PR in [RFC](https://github.com/OpenIMSDK/Open-IM-Server/issues?q=is%3Aissue+is%3Aopen+RFC+label%3ARFC) issues and learn about them.
 
@@ -295,7 +309,6 @@ The documentation for Open-IM-Server includes:
 
 + [README.md](https://github.com/OpenIMSDK/Open-IM-Server/blob/main/README.md): This file includes the basic information and instructions for getting started with Open-IM-Server.
 + [CONTRIBUTING.md](https://github.com/OpenIMSDK/Open-IM-Server/blob/main/CONTRIBUTING.md): This file contains guidelines for contributing to Open-IM-Server's codebase, such as how to submit issues, pull requests, and code reviews.
-+ [DEVELOPGUIDE.md](https://github.com/OpenIMSDK/Open-IM-Server/blob/main/DEVELOPGUIDE.md): This file provides a more in-depth guide to developing Open-IM-Server, including information on the project's architecture, coding conventions, and testing practices.
 + [Official Documentation](https://doc.rentsoft.cn/): This is the official documentation for Open-IM-Server, which includes comprehensive information on all of its features, configuration options, and troubleshooting tips.
 
 Please obey the following rules to better format the docs, which would greatly improve the reading experience.
@@ -315,7 +328,7 @@ We choose GitHub as the primary place for Open-IM-Server to collaborate. So the
 + help solve other user's problems;
 + help review other's [PR](https://github.com/OpenIMSDK/Open-IM-Server/pulls?q=is%3Apr+is%3Aopen+sort%3Aupdated-desc) design; 
 + discuss about Open-IM-Server to make things clearer;
-+ advocate [Open-IM-Server](google.com/search?q=Open-IM-Server) technology beyond GitHub;
++ advocate [Open-IM-Server](https://google.com/search?q=Open-IM-Server) technology beyond GitHub;
 + write blogs on Open-IM-Server and so on.
 
 In a word, **ANY HELP IS CONTRIBUTION.**

Dockerfile

@@ -1,39 +1,31 @@
-FROM golang as build
+# Build Stage
+FROM golang:1.20 AS builder
 
-# go mod Installation source, container environment variable addition will override the default variable value
-ENV GO111MODULE=on
-ENV GOPROXY=https://goproxy.cn,direct
+# Set go mod installation source and proxy
+ARG GO111MODULE=on
+ARG GOPROXY=https://goproxy.cn,direct
+ENV GO111MODULE=$GO111MODULE
+ENV GOPROXY=$GOPROXY
 
 # Set up the working directory
-WORKDIR /Open-IM-Server
-# add all files to the container
-COPY . .
+WORKDIR /openim/openim-server
 
-WORKDIR /Open-IM-Server/scripts
-RUN chmod +x *.sh
+COPY go.mod go.sum go.work ./
+#RUN go mod download
 
-RUN /bin/sh -c ./build_all_service.sh
+# Copy all files to the container
+ADD . .
 
-#Blank image Multi-Stage Build
-FROM ubuntu
+RUN make clean
+RUN make build
 
-RUN rm -rf /var/lib/apt/lists/*
-RUN apt-get update && apt-get install apt-transport-https && apt-get install procps\
-&&apt-get install net-tools
-#Non-interactive operation
-ENV DEBIAN_FRONTEND=noninteractive
-RUN apt-get install -y vim curl tzdata gawk
-#Time zone adjusted to East eighth District
-RUN ln -fs /usr/share/zoneinfo/Asia/Shanghai /etc/localtime && dpkg-reconfigure -f noninteractive tzdata
+FROM ghcr.io/openim-sigs/openim-ubuntu-image:latest
 
+WORKDIR ${SERVER_WORKDIR}
 
-#set directory to map logs,config file,scripts file.
-VOLUME ["/Open-IM-Server/logs","/Open-IM-Server/config","/Open-IM-Server/scripts","/Open-IM-Server/db/sdk"]
+# Copy scripts and binary files to the production image
+COPY --from=builder ${OPENIM_SERVER_BINDIR} /openim/openim-server/_output/bin
+COPY --from=builder ${OPENIM_SERVER_CMDDIR} /openim/openim-server/scripts
+COPY --from=builder ${SERVER_WORKDIR}/config /openim/openim-server/config
 
-#Copy scripts files and binary files to the blank image
-COPY --from=build /Open-IM-Server/scripts /Open-IM-Server/scripts
-COPY --from=build /Open-IM-Server/bin /Open-IM-Server/bin
-
-WORKDIR /Open-IM-Server/scripts
-
-CMD ["./docker_start_all.sh"]
+CMD ["/openim/openim-server/scripts/docker-start-all.sh"]

Makefile

@@ -4,14 +4,15 @@
 
 .DEFAULT_GOAL := help
 
+## all: Run tidy, gen, add-copyright, format, lint, cover, build ✨
 .PHONY: all
-all: tidy gen add-copyright format lint cover build
+all: tidy gen add-copyright verify lint cover restart
 
 # ==============================================================================
 # Build set
 
 ROOT_PACKAGE=github.com/OpenIMSDK/Open-IM-Server
-# TODO: This is version control for the future
+# TODO: This is version control for the future https://github.com/OpenIMSDK/Open-IM-Server/issues/574
 VERSION_PACKAGE=github.com/OpenIMSDK/Open-IM-Server/pkg/version
 
 # ==============================================================================
@@ -24,6 +25,8 @@ include scripts/make-rules/copyright.mk
 include scripts/make-rules/gen.mk
 include scripts/make-rules/dependencies.mk
 include scripts/make-rules/tools.mk
+include scripts/make-rules/release.mk
+include scripts/make-rules/swagger.mk
 
 # ==============================================================================
 # Usage
@@ -36,11 +39,12 @@ Options:
 
   BINS             Binaries to build. Default is all binaries under cmd.
                    This option is available when using: make {build}(.multiarch)
-                   Example: make build BINS="open_im_api open_im_cms_api".
+                   Example: make build BINS="openim-api openim-cmdutils".
 
   PLATFORMS        Platform to build for. Default is linux_arm64 and linux_amd64.
                    This option is available when using: make {build}.multiarch
-                   Example: make build.multiarch PLATFORMS="linux_arm64 linux_amd64".
+                   Example: make multiarch PLATFORMS="linux_s390x linux_mips64
+                   linux_mips64le darwin_amd64 windows_amd64 linux_amd64 linux_arm64".
 
   V                Set to 1 enable verbose build. Default is 0.
 endef
@@ -49,120 +53,184 @@ export USAGE_OPTIONS
 # ==============================================================================
 # Targets
 
-## build: Build binaries by default
+## init: Initialize openim server project ✨
+.PHONY: init
+init:
+	@$(MAKE) gen.init
+
+## demo: Run demo get started with Makefiles quickly ✨
+.PHONY: demo
+demo:
+	@$(MAKE) go.demo
+
+## build: Build binaries by default ✨
 .PHONY: build
 build:
 	@$(MAKE) go.build
 
-## build-multiarch: Build binaries for multiple platforms. See option PLATFORMS.
-.PHONY: build-multiarch
-build-multiarch:
+## start: Start openim ✨
+.PHONY: start
+start:
+	@$(MAKE) go.start
+
+## stop: Stop openim ✨
+.PHONY: stop
+stop:
+	@$(MAKE) go.stop
+
+## restart: Restart openim ✨
+.PHONY: restart
+restart: clean stop build init start
+
+## multiarch: Build binaries for multiple platforms. See option PLATFORMS. ✨
+.PHONY: multiarch
+multiarch:
 	@$(MAKE) go.build.multiarch
 
-## tidy: tidy go.mod
+## verify: execute all verity scripts. ✨
+.PHONY: verify
+verify:
+	@$(MAKE) go.verify
+
+## install: Install deployment openim ✨
+.PHONY: install
+install:
+	@$(MAKE) go.install
+
+## check: Check OpenIM deployment ✨
+.PHONY: check
+check:
+	@$(MAKE) go.check
+
+## check-component
+.PHONY: check-component
+check-component:
+	@$(MAKE) go.check-component
+
+## tidy: tidy go.mod ✨
 .PHONY: tidy
 tidy:
 	@$(GO) mod tidy
 
-## vendor: vendor go.mod
+## vendor: vendor go.mod ✨
 .PHONY: vendor
 vendor:
 	@$(GO) mod vendor
 
-## style: code style -> fmt,vet,lint
+## style: code style -> fmt,vet,lint ✨
 .PHONY: style
 style: fmt vet lint
 
-## fmt: Run go fmt against code.
+## fmt: Run go fmt against code. ✨
 .PHONY: fmt
 fmt:
 	@$(GO) fmt ./...
 
-## vet: Run go vet against code.
+## vet: Run go vet against code. ✨
 .PHONY: vet
 vet:
 	@$(GO) vet ./...
 
-## lint: Check syntax and styling of go sources.
+## lint: Check syntax and styling of go sources. ✨
 .PHONY: lint
 lint:
 	@$(MAKE) go.lint
 
-## format: Gofmt (reformat) package sources (exclude vendor dir if existed).
+## format: Gofmt (reformat) package sources (exclude vendor dir if existed). ✨
 .PHONY: format
 format:
 	@$(MAKE) go.format
 
-## test: Run unit test.
+## test: Run unit test. ✨
 .PHONY: test
 test:
 	@$(MAKE) go.test
 
-## cover: Run unit test and get test coverage.
-.PHONY: cover 
+## cover: Run unit test and get test coverage. ✨
+.PHONY: cover
 cover:
 	@$(MAKE) go.test.cover
 
-## updates: Check for updates to go.mod dependencies
+## updates: Check for updates to go.mod dependencies. ✨
 .PHONY: updates
 	@$(MAKE) go.updates
 
-## imports: task to automatically handle import packages in Go files using goimports tool
+## imports: task to automatically handle import packages in Go files using goimports tool. ✨
 .PHONY: imports
 imports:
 	@$(MAKE) go.imports
 
-## clean: Remove all files that are created by building. 
+## clean: Remove all files that are created by building. ✨
 .PHONY: clean
 clean:
 	@$(MAKE) go.clean
 
-## image: Build docker images for host arch.
+## image: Build docker images for host arch. ✨
 .PHONY: image
 image:
 	@$(MAKE) image.build
 
-## image.multiarch: Build docker images for multiple platforms. See option PLATFORMS.
+## image.multiarch: Build docker images for multiple platforms. See option PLATFORMS. ✨
 .PHONY: image.multiarch
 image.multiarch:
 	@$(MAKE) image.build.multiarch
 
-## push: Build docker images for host arch and push images to registry.
+## push: Build docker images for host arch and push images to registry. ✨
 .PHONY: push
 push:
 	@$(MAKE) image.push
 
-## push.multiarch: Build docker images for multiple platforms and push images to registry.
+## push.multiarch: Build docker images for multiple platforms and push images to registry. ✨
 .PHONY: push.multiarch
 push.multiarch:
 	@$(MAKE) image.push.multiarch
 
-## tools: Install dependent tools.
+## tools: Install dependent tools. ✨
 .PHONY: tools
 tools:
 	@$(MAKE) tools.install
 
-## gen: Generate all necessary files.
+## gen: Generate all necessary files. ✨
 .PHONY: gen
 gen:
 	@$(MAKE) gen.run
 
-## verify-copyright: Verify the license headers for all files.
+## swagger: Generate swagger document. ✨
+.PHONY: swagger
+swagger:
+	@$(MAKE) swagger.run
+
+## serve-swagger: Serve swagger spec and docs. ✨
+.PHONY: swagger.serve
+serve-swagger:
+	@$(MAKE) swagger.serve
+
+## verify-copyright: Verify the license headers for all files. ✨
 .PHONY: verify-copyright
 verify-copyright:
 	@$(MAKE) copyright.verify
 
-## add-copyright: Add copyright ensure source code files have license headers.
+## add-copyright: Add copyright ensure source code files have license headers. ✨
 .PHONY: add-copyright
 add-copyright:
 	@$(MAKE) copyright.add
 
-## help: Show this help info.
+## advertise: Project introduction, become a contributor ✨
+.PHONY: advertise
+advertise:
+	@$(MAKE) copyright.advertise
+
+## release: release the project ✨
+.PHONY: release
+release: release.verify release.ensure-tag
+	@scripts/release.sh
+
+## help: Show this help info. ✨
 .PHONY: help
 help: Makefile
 	$(call makehelp)
 
-## help-all: Show all help details info.
+## help-all: Show all help details info. ✨
 .PHONY: help-all
-help-all: go.help copyright.help tools.help image.help help
+help-all: go.help copyright.help tools.help image.help dependencies.help gen.help release.help swagger.help help
 	$(call makeallhelp)

README-zh_CN.md

@@ -1,16 +1,19 @@
-<h1 align="center" style="border-bottom: none">
-    <b>
-        <a href="https://doc.rentsoft.cn/">Open IM Server</a><br>
-    </b>
-    ⭐️  Open source Instant Messaging Server  ⭐️ <br>
-</h1>
+<p align="center">
+    <a href="https://www.openim.online">
+        <img src="./assets/logo-gif/openim-logo.gif" width="60%" height="30%"/>
+    </a>
+</p>
+
+<h3 align="center" style="border-bottom: none">
+    ⭐️  Open source Instant Messaging Server ⭐️ <br>
+<h3>
 
 
 <p align=center>
 <a href="https://goreportcard.com/report/github.com/OpenIMSDK/Open-IM-Server"><img src="https://goreportcard.com/badge/github.com/OpenIMSDK/Open-IM-Server" alt="A+"></a>
 <a href="https://github.com/OpenIMSDK/Open-IM-Server/issues?q=is%3Aissue+is%3Aopen+sort%3Aupdated-desc+label%3A%22good+first+issue%22"><img src="https://img.shields.io/github/issues/OpenIMSDK/Open-IM-Server/good%20first%20issue?logo=%22github%22" alt="good first"></a>
 <a href="https://github.com/OpenIMSDK/Open-IM-Server"><img src="https://img.shields.io/github/stars/OpenIMSDK/Open-IM-Server.svg?style=flat&logo=github&colorB=deeppink&label=stars"></a>
-<a href="https://join.slack.com/t/openimsdk/shared_invite/zt-1tmoj26uf-_FDy3dowVHBiGvLk9e5Xkg"><img src="https://img.shields.io/badge/Slack-100%2B-blueviolet?logo=slack&amp;logoColor=white"></a>
+<a href="https://join.slack.com/t/openimsdk/shared_invite/zt-1tmoj26uf-_FDy3dowVHBiGvLk9e5Xkg"><img src="https://img.shields.io/badge/Slack-300%2B-blueviolet?logo=slack&amp;logoColor=white"></a>
 <a href="https://github.com/OpenIMSDK/Open-IM-Server/blob/main/LICENSE"><img src="https://img.shields.io/badge/license-Apache--2.0-green"></a>
 <a href="https://golang.org/"><img src="https://img.shields.io/badge/Language-Go-blue.svg"></a>
 </p>
@@ -18,176 +21,337 @@
 </p>
 
 <p align="center">
-    <a href="./README.md"><b>English</b></a> •
-    <a href="./README_zh.md"><b>中文</b></a>
+    <a href="./README.md"><b> English </b></a> •
+    <a href="./README-zh_CN.md"><b> 简体中文 </b></a> •
+    <a href="https://www.openim.online/en"><b> Docs </b></a>
 </p>
 
+
 </p>
 
-## Open-IM-Server 是什么
+## ✨ 关于 OpenIM
 
-Open-IM-Server 是一款即时通讯服务器，使用纯 Golang 开发，采用 JSON over WebSocket 传输协议。在 Open-IM-Server 中，所有东西都是消息，因此您可以轻松扩展自定义消息，而无需修改服务器代码。使用微服务架构，Open-IM-Server 可以使用集群进行部署。通过在客户端服务器上部署 Open-IM-Server，开发人员可以免费快速地将即时通讯和实时网络功能集成到自己的应用程序中，并确保业务数据的安全性和隐私性。
+Open-IM-Server 是使用纯 Golang 精心制作的强大的即时消息服务器。其通过 JSON over WebSocket 进行通信的独特方法将每次交互都视为消息。这简化了定制并消除了修改服务器代码的需求。通过利用微服务架构，服务器可以通过集群部署，保证出色的性能和可伸缩性。
 
-## 特点
+Open-IM-Server 不仅仅是一个即时消息服务器；它是将实时网络集成到您的应用程序中的强大工具，定位为您集成的首选选择！🚀
 
-+ 免费
-+ 可扩展架构
-+ 易于集成
-+ 良好的可扩展性
-+ 高性能
-+ 轻量级
-+ 支持多种协议
+请注意，Open-IM-Server 不作为独立产品运行，也不提供内置的帐户注册或登录服务。为了简化您的实施过程，我们已开源了 [chat repository](https://github.com/OpenIMSDK/chat)，其中包括这些功能。与 Open-IM-Server 一起部署此聊天业务服务器可加快全面的聊天产品的设置。👥
 
-## 社区
+为了进一步增强您的体验，我们还提供了 SDK 客户端，在其中实现了大多数复杂逻辑。可以在 [此链接](https://github.com/OpenIMSDK/openim-sdk-core) 找到 [SDK repository](https://github.com/OpenIMSDK/openim-sdk-core)。[chat repository](https://github.com/OpenIMSDK/chat) 是我们的业务服务器，而 'core' 代表 SDK 的高级封装，它们协同工作以提供卓越的结果。✨
 
-+ 访问中文官方网站：[Open-IM中文开发文档](https://doc.rentsoft.cn/)
+## :star2: 为什么选择 OpenIM
 
-## 快速开始
+**🔍 功能截图显示**
 
-### 安装Open-IM-Server
+<div align="center">
 
-> Open-IM 依赖于五个开源高性能组件：ETCD、MySQL、MongoDB、Redis 和 Kafka。在部署 Open-IM-Server 之前，请确保已安装上述五个组件。如果您的服务器没有上述组件，则必须首先安装缺失组件。如果您已经拥有上述组件，则建议直接使用它们。如果没有，则建议使用 Docker-compose，无需安装依赖项，一键部署，更快更方便。
+|                      💻🔄📱 多终端同步 🔄🖥️                       |                        📅⚡ 高效会议 🚀💼                        |
+| :----------------------------------------------------------: | :----------------------------------------------------------: |
+| ![multiple-message](./assets/demo/multi-terminal-synchronization.png) | ![efficient-meetings](./assets/demo/efficient-meetings.png) |
+|                    📲🔄 **一对一和群聊** 👥🗣️                    |               🎁💻 **特殊功能 - 自定义消息** ✉️🎨                |
+| ![group-chat](./assets/demo/group-chat.png) | ![special-function](./assets/demo/special-function.png) |
 
-### 使用 Docker 部署
+</div>
 
-1. 安装 [Go 环境](https://golang.org/doc/install)。确保 Go 版本至少为 1.17。
+1. **全面的消息类型支持 :speech_balloon:**
 
-2. 克隆 Open-IM 项目到您的服务器
+   ✅ 支持几乎所有类型的消息，包括文本、图片、表情符号、语音、视频、地理位置、文件、报价、名片、系统通知、自定义消息等
 
-   `git clone <https://github.com/OpenIMSDK/Open-IM-Server.git> --recursive`
+   ✅ 支持一对一和多人音视频通话
 
-3. 部署
+   ✅ 为 iOS、Android、Flutter、uni-app、ReactNative、Electron、Web、H5 等多个平台提供终端支持
 
-   1. 修改 env
+2. **随时随地的高效会议 :earth_americas:**
 
-      ```
-      #cd Open-IM-server
-      USER=root
-      PASSWORD=openIM123    #密码至少8位数字，不包括特殊字符
-      ENDPOINT=http://127.0.0.1:10005 #请用互联网IP替换127.0.0.1
-      DATA_DIR=./
-      ```
+   ✅ 基于具有 100% 可靠强制信令功能的 IM (Instant Messaging)，为与聊天应用程序深度集成的 IM 系统铺平了道路
 
-   2. 部署和启动
+   ✅ 支持单次会议中的数百人，订阅人数达到数千，以及服务器端音视频录制
 
-      ```
-      chmod +x install_im_server.sh;
-      ./install_im_server.sh;
-      ```
+3. **适用于各种社交场景的一对一和群聊 :busts_in_silhouette:**
 
-   3. 检查服务
+   ✅ OpenIM 有四种角色：应用程序管理员、群主、群管理员和普通成员
 
-      ```
-      cd scripts;
-      ./docker_check_service.sh
-      ./check_all.sh
-      ```
+   ✅ 强大的群特性，如静音、群公告、群验证、无限群成员和根据需要加载群消息
 
-      ![https://github.com/OpenIMSDK/Open-IM-Server/blob/main/docs/Open-IM-Servers-on-System.png](https://github.com/OpenIMSDK/Open-IM-Server/blob/main/docs/Open-IM-Servers-on-System.png)
+4. **独特的功能 :star2:**
 
-### 使用源代码部署
+   ✅ 支持读取并烧毁私人聊天，可自定义时长
 
-1. Go 1.17 或更高版本。
+   ✅ 消息编辑功能扩大了社交场景，使即时通讯变得更加多样化和有趣
 
-2. 克隆
+5. **开源 :open_hands:**
 
-   ```
-   git clone <https://github.com/OpenIMSDK/Open-IM-Server.git> --recursive
-   cd cmd/openim-sdk-core
-   git checkout main
-   ```
+   ✅ OpenIM 的代码是开源的，数据自控，旨在构建一个全球领先的 IM 开源社区，包括客户端 SDK 和服务器
 
-3. 设置可执行权限
+   ✅ 基于开源服务器，已经开发了许多出色的开源项目，例如 [OpenKF](https://github.com/OpenIMSDK/OpenKF) (开源 AI 客户服务系统)
 
-   ```
-   cd ../../scripts/
-   chmod +x *.sh
-   ```
+6. **易于扩展 :wrench:**
 
-4. 构建
+   ✅ OpenIM 服务器是用 Golang 实现的，引入了创新的 "一切都是消息" 通信模型，简化了自定义消息和扩展功能的实现
 
-   ```
-   ./batch_build_all_service.sh
-   ```
+7. **高性能 :racing_car:**
 
-所有服务已成功构建
+   ✅ OpenIM 支持集群中的分层治理架构，经过大量用户的测试，并抽象了在线消息、离线消息和历史消息的存储模型
 
-### 配置说明
+8. **全平台支持 :tv:**
 
-> Open-IM 配置分为基本组件配置和业务内部服务配置。当使用产品时，开发人员需要将每个组件的地址填写为其服务器组件的地址，并确保业务内部服务端口未被占用。
+   ✅ 支持原生 iOS、Android；跨平台 Flutter、uni-app、ReactNative；主要的 Web 前端框架如 React、Vue；小程序和 Electron 支持的 PC 平台
 
-### 基本组件配置说明
+9. **终极部署体验 🤖**
 
-+ ETCD
-  + Etcd 用于 RPC 服务的发现和注册，Etcd Schema 是注册名称的前缀，建议将其修改为公司名称，Etcd 地址(ip+port)支持集群部署，可以填写多个 ETCD 地址，也可以只有一个 etcd 地址。
-+ MySQL
-  + MySQL 用于消息和用户关系的全存储，暂时不支持集群部署。修改地址、用户、密码和数据库名称。
-+ Mongo
-  + Mongo 用于消息的离线存储，默认存储 7 天。暂时不支持集群部署。只需修改地址和数据库名称即可。
-+ Redis
-  + Redis 目前主要用于消息序列号存储和用户令牌信息存储。暂时不支持集群部署。只需修改相应的 Redis 地址和密码即可。
-+ Kafka
-  + Kafka 用作消息传输存储队列，支持集群部署，只需修改相应的地址。
+   ✅ 支持 [集群部署](https://github.com/OpenIMSDK/Open-IM-Server/edit/main/deployments/README.md)
 
-### 内部服务配置说明
+   ✅ 支持多架构镜像，我们的 Docker 镜像不仅托管在 GitHub 上，而且还在阿里云和 Docker Hub 上支持多个架构。请访问 [我们的 GitHub packages](https://github.com/orgs/OpenIMSDK/packages?repo_name=Open-IM-Server) 并阅读我们的 [版本管理文档](https://github.com/OpenIMSDK/Open-IM-Server/blob/main/docs/conversions/version.md) 以获取更多信息。
 
-+ credential&&push
-  + Open-IM 需要使用三方离线推送功能。目前使用的是腾讯的三方推送，支持 IOS、Android 和 OSX 推送。这些信息是腾讯推送的一些注册信息，开发人员需要去腾讯云移动推送注册相应的信息。如果您没有填写相应的信息，则无法使用离线消息推送功能。
-+ api&&rpcport&&longconnsvr&&rpcregistername
-  + API 端口是 HTTP 接口，longconnsvr 是 WebSocket 监听端口，rpcport 是内部服务启动端口。两者都支持集群部署。请确保这些端口未被使用。如果要为单个服务打开多个服务，请填写多个以逗号分隔的端口。rpcregistername 是每个服务在注册表 Etcd 中注册的服务名称，无需修改。
-+ log&&modulename
-  + 日志配置包括日志文件的存储路径，日志发送到 Elasticsearch 进行日志查看。目前不支持将日志发送到 Elasticsearch。暂时不需要修改配置。modulename 用于根据服务模块的名称拆分日志。默认配置可以。
+10. **开源社区的大生态系统 🤲**
 
-### 脚本说明
+    ✅ 我们有数万用户和许多解决方案来解决问题。 
 
-> Open-IM 脚本提供服务编译、启动和停止脚本。有四个 Open-IM 脚本启动模块，一个是 http+rpc 服务启动模块，第二个是 WebSocket 服务启动模块，然后是 msg_transfer 模块，最后是 push 模块。
+    ✅  我们有一个大型的开源社区叫 [OpenIMSDK](https://github.com/OpenIMSDK)，它运行核心模块，我们还有一个开源社区叫 [openim-sigs](https://github.com/openim-sigs) 以探索更多基于 IM 的基础设施产品。
 
-+ path_info.cfg&&style_info.cfg&&
+## :rocket: 快速开始
 
-  functions.sh
+<details>   <summary>使用 Docker Compose 部署</summary>
 
-  + 包含每个模块的路径信息，包括源代码所在的路径、服务启动名称、shell 打印字体样式以及一些用于处理 shell 字符串的函数。
+1. 克隆项目
 
-+ build_all_service.sh
+```
+bashCopy code# 选择您需要的
+BRANCH=release-v3.1
+git clone -b $BRANCH https://github.com/OpenIMSDK/Open-IM-Server openim && export openim=$(pwd)/openim && cd $openim && make build
+```
 
-  + 编译模块，将 Open-IM 的所有源代码编译为二进制文件并放入 bin 目录。
+> **注意** 阅读我们的发布策略：https://github.com/OpenIMSDK/Open-IM-Server/blob/main/docs/conversions/version.md
 
-+ start_rpc_api_service.sh&&msg_gateway_start.sh&&msg_transfer_start.sh&&push_start.sh
+1. 修改 `.env`
 
-  + 独立脚本启动模块，后跟 API 和 RPC 模块、消息网关模块、消息传输模块和推送模块。
+```
+bashCopy codeUSER=root #无需修改
+PASSWORD=openIM123  #8位或更多数字和字母的组合，此密码适用于redis、mysql、mongo，以及config/config.yaml中的accessSecret
+ENDPOINT=http://127.0.0.1:10005 #minio的外部服务IP和端口，或使用域名storage.xx.xx，应用程序必须能够访问此IP和端口或域名，
+API_URL=http://127.0.0.1:10002/object/ #应用程序必须能够访问此IP和端口或域名，
+DATA_DIR=./  #指定大磁盘目录
+```
 
-+ start_all.sh&&stop_all.sh
+1. 部署并启动
 
-  + 总脚本，启动所有服务和关闭所有服务。
+> **注意** 此命令只能执行一次。它会基于 `.env` 中的 `PASSWORD` 变量修改 docker-compose 中的组件密码，并修改 `config/config.yaml` 中的组件密码。如果 `.env` 中的密码发生变化，您需要首先执行 `docker-compose down`；`rm components -rf` 然后执行此命令。
 
-## 认证流程图
+```
+bashCopy code
+make install
+```
 
-![https://github.com/OpenIMSDK/Open-IM-Server/blob/main/docs/open-im-server.png](https://github.com/OpenIMSDK/Open-IM-Server/blob/main/docs/open-im-server.png)
+1. 检查服务
 
-## 架构
+```
+bashCopy code
+make check
+```
 
-![https://github.com/OpenIMSDK/Open-IM-Server/blob/main/docs/Architecture.jpg](https://github.com/OpenIMSDK/Open-IM-Server/blob/main/docs/Architecture.jpg)
+![https://github.com/OpenIMSDK/Open-IM-Server/blob/main/docs/images/docker_build.png](https://github.com/OpenIMSDK/Open-IM-Server/blob/main/docs/images/docker_build.png)
 
-## 开始开发 OpenIM
+</details>  <details>  <summary>从源码编译</summary>
 
-[社区存储库](https://github.com/OpenIMSDK/community)包含有关从源代码构建 Kubernetes、如何贡献代码和文档、有关什么的联系人等所有信息。
+您需要 `Go 1.18` 或更高版本，以及 `make`。
 
-## 贡献
+版本详情：https://github.com/OpenIMSDK/Open-IM-Server/blob/main/docs/conversions/version.md
 
-欢迎对该项目进行贡献！请参见 [CONTRIBUTING.md](http://CONTRIBUTING.md) 了解详细信息。
+```
+bashCopy code# 选择您需要的
+BRANCH=release-v3.1
+git clone -b $BRANCH https://github.com/OpenIMSDK/Open-IM-Server openim && export openim=$(pwd)/openim && cd $openim && make build
+```
 
-## 社区会议
+阅读关于 [OpenIM 版本策略](https://github.com/OpenIMSDK/Open-IM-Server/blob/main/docs/conversions/version.md)
 
-我们希望任何人都能参与我们的社区，我们提供礼品和奖励，并欢迎您每周四晚上加入我们。
+使用 `make help` 来查看 OpenIM 支持的指令。
 
-我们在 [GitHub 讨论](https://github.com/OpenIMSDK/Open-IM-Server/discussions/categories/meeting) 中记录每个 [两周会议](https://github.com/OpenIMSDK/Open-IM-Server/issues/381)，我们的记录写在 [Google 文档](https://docs.google.com/document/d/1nx8MDpuG74NASx081JcCpxPgDITNTpIIos0DS6Vr9GU/edit?usp=sharing) 中。
+如图所示，所有服务已成功构建
 
-## 谁在使用 Open-IM-Server
+![成功编译](https://github.com/OpenIMSDK/Open-IM-Server/blob/main/docs/images/build.png)
 
-[用户案例研究](https://github.com/OpenIMSDK/community/blob/main/ADOPTERS.md) 页面包括该项目的用户列表。您可以留下 [📝评论](https://github.com/OpenIMSDK/Open-IM-Server/issues/379) 让我们知道您的用例。
+</details> <details>  <summary>组件配置说明</summary>
 
-![https://github.com/OpenIMSDK/OpenIM-Docs/blob/main/docs/images/WechatIMG20.jpeg](https://github.com/OpenIMSDK/OpenIM-Docs/blob/main/docs/images/WechatIMG20.jpeg)
+config/config.yaml 文件为存储组件提供了详细的配置说明。
 
-## 许可证
+- Zookeeper
 
-Open-IM-Server 使用 Apache 2.0 许可证。有关详情，请参阅 LICENSE 文件。
+  - 用于 RPC 服务发现和注册，支持集群。
+
+    ```
+    bashCopy codezookeeper:
+      schema: openim                          #不建议修改
+      address: [ 127.0.0.1:2181 ]             #地址
+      username:                               #用户名
+      password:                               #密码
+    ```
+
+- MySQL
+
+  - 用于存储用户、关系和群组，支持主从数据库。
+
+    ```
+    bashCopy codemysql:
+      address: [ 127.0.0.1:13306 ]            #地址
+      username: root                          #用户名
+      password: openIM123                     #密码
+      database: openIM_v2                     #不建议修改
+      maxOpenConn: 1000                       #最大连接
+      maxIdleConn: 100                        #最大空闲连接
+      maxLifeTime: 60                         #连接可重用的最大时间(秒)
+      logLevel: 4                             #日志级别 1=静音 2=错误 3=警告 4=信息
+      slowThreshold: 500                      #慢语句阈值(毫秒)
+    ```
+
+- Mongo
+
+  - 用于存储离线消息，支持 mongo 分片集群。
+
+    ```
+    bashCopy codemongo:
+      uri:                                    #如果不为空，则直接使用此值
+      address: [ 127.0.0.1:37017 ]            #地址
+      database: openIM                        #默认 mongo 数据库
+      username: root                          #用户名
+      password: openIM123                     #密码
+      maxPoolSize: 100                        #最大连接数
+    ```
+
+- Redis
+
+  - 用于存储消息序列号、最新消息、用户令牌和 mysql 缓存，支持集群部署。
+
+    ```
+    bashCopy coderedis:
+      address: [ 127.0.0.1:16379 ]            #地址
+      username:                               #用户名
+      password: openIM123                     #密码
+    ```
+
+- Kafka
+
+  - 用于消息队列，用于消息解耦，支持集群部署。
+
+    ```
+    bashCopy codekafka:
+      username:                               #用户名
+      password:                               #密码
+      addr: [ 127.0.0.1:9092 ]                #地址
+      latestMsgToRedis:
+        topic: "latestMsgToRedis"
+      offlineMsgToMongo:
+        topic: "offlineMsgToMongoMysql"
+      msgToPush:
+        topic: "msqToPush"
+      msgToModify:
+        topic: "msgToModify"
+      consumerGroupID:
+        msgToRedis: redis
+        msgToMongo: mongo
+        msgToMySql: mysql
+        msgToPush: push
+        msgToModify: modify
+    ```
+
+</details> <details>  <summary>启动和停止服务</summary>
+
+启动服务
+
+```
+bashCopy code
+./scripts/start-all.sh;
+```
+
+检查服务
+
+```
+bashCopy code
+./scripts/check-all.sh
+```
+
+停止服务
+
+```
+bashCopy code
+./scripts/stop-all.sh
+```
+
+</details>
+
+<details>  <summary>开放 IM 端口</summary>
+
+| TCP 端口  | 描述                                                | 操作                                    |
+| --------- | --------------------------------------------------- | --------------------------------------- |
+| TCP:10001 | ws 协议，消息端口如消息发送、推送等，用于客户端 SDK | 端口释放或 nginx 反向代理，并关闭防火墙 |
+| TCP:10002 | api 端口，如用户、朋友、组、消息接口。              | 端口释放或 nginx 反向代理，并关闭防火墙 |
+| TCP:10005 | 选择 minio 存储时所需 (openIM 默认使用 minio 存储)  | 端口释放或 nginx 反向代理，并关闭防火墙 |
+
+</details>  <details>  <summary>开放聊天端口</summary>
+
+- 聊天仓库: https://github.com/OpenIMSDK/chat
+
+| TCP 端口  | 描述                     | 操作                                    |
+| --------- | ------------------------ | --------------------------------------- |
+| TCP:10008 | 业务系统，如注册、登录等 | 端口释放或 nginx 反向代理，并关闭防火墙 |
+| TCP:10009 | 管理后台，如统计、封禁等 | 端口释放或 nginx 反向代理，并关闭防火墙 |
+
+</details>
+
+## :link: APP 和 OpenIM 之间的关系
+
+OpenIM 不仅仅是一个开源的即时消息组件，它是您的应用程序生态系统的一个不可分割的部分。查看此图表以了解 AppServer、AppClient、Open-IM-Server 和 Open-IM-SDK 如何互动。
+
+![App-OpenIM 关系](https://github.com/OpenIMSDK/Open-IM-Server/blob/main/docs/images/open-im-server.png)
+
+## :building_construction: 总体架构
+
+深入了解 Open-IM-Server 的功能与我们的架构图。
+
+![总体架构](https://github.com/OpenIMSDK/Open-IM-Server/blob/main/docs/images/Architecture.jpg)
+
+## :hammer_and_wrench: 开始开发 OpenIM
+
+OpenIM 我们的目标是建立一个顶级的开源社区。我们有一套标准，在 [Community repository](https://github.com/OpenIMSDK/community) 中。
+
+如果您想为这个 Open-IM-Server 仓库做贡献，请阅读我们的 [贡献者文档](https://github.com/OpenIMSDK/Open-IM-Server/blob/main/CONTRIBUTING.md)。
+
+在您开始之前，请确保您的更改是需要的。最好的方法是创建一个 [新的讨论](https://github.com/OpenIMSDK/Open-IM-Server/discussions/new/choose) 或 [Slack 通讯](https://join.slack.com/t/openimsdk/shared_invite/zt-1tmoj26uf-_FDy3dowVHBiGvLk9e5Xkg)，或者如果您发现一个问题，首先 [报告它](https://github.com/OpenIMSDK/Open-IM-Server/issues/new/choose)。
+
+- [代码标准](https://github.com/OpenIMSDK/Open-IM-Server/blob/main/docs/conversions/go_code.md)
+- [Docker 图像标准](https://github.com/OpenIMSDK/Open-IM-Server/blob/main/docs/conversions/images.md)
+- [目录标准](https://github.com/OpenIMSDK/Open-IM-Server/blob/main/docs/conversions/directory.md)
+- [提交标准](https://github.com/OpenIMSDK/Open-IM-Server/blob/main/docs/conversions/commit.md)
+- [版本控制标准](https://github.com/OpenIMSDK/Open-IM-Server/blob/main/docs/conversions/version.md)
+- [接口标准](https://github.com/OpenIMSDK/Open-IM-Server/blob/main/docs/conversions/api.md)
+- [日志标准](https://github.com/OpenIMSDK/Open-IM-Server/blob/main/docs/conversions/log.md)
+- [错误代码标准](https://github.com/OpenIMSDK/Open-IM-Server/blob/main/docs/conversions/error_code.md)
+
+## :busts_in_silhouette: 社区
+
+- 📚 [OpenIM 社区](https://github.com/OpenIMSDK/community)
+- 💕 [OpenIM 兴趣小组](https://github.com/Openim-sigs)
+- 🚀 [加入我们的 Slack 社区](https://join.slack.com/t/openimsdk/shared_invite/zt-1tmoj26uf-_FDy3dowVHBiGvLk9e5Xkg)
+- :eyes: [加入我们的微信群 (微信群)](https://openim-1253691595.cos.ap-nanjing.myqcloud.com/WechatIMG20.jpeg)
+
+## :calendar: 社区会议
+
+我们希望任何人都可以参与我们的社区并贡献代码，我们提供礼物和奖励，欢迎您每周四晚上加入我们。
+
+我们的会议在 [OpenIM Slack](https://join.slack.com/t/openimsdk/shared_invite/zt-1tmoj26uf-_FDy3dowVHBiGvLk9e5Xkg) 🎯，然后您可以搜索 Open-IM-Server 管道加入。
+
+我们在 [GitHub 讨论](https://github.com/OpenIMSDK/Open-IM-Server/discussions/categories/meeting) 中记下每次 [双周会议](https://github.com/orgs/OpenIMSDK/discussions/categories/meeting) 的笔记，我们的历史会议记录以及会议回放都可在 [Google Docs :bookmark_tabs:](https://docs.google.com/document/d/1nx8MDpuG74NASx081JcCpxPgDITNTpIIos0DS6Vr9GU/edit?usp=sharing) 中找到。
+
+## :eyes: 谁在使用 OpenIM
+
+查看我们的 [用户案例研究](https://github.com/OpenIMSDK/community/blob/main/ADOPTERS.md) 页面以获取项目用户列表。不要犹豫，留下一个 [📝评论](https://github.com/OpenIMSDK/Open-IM-Server/issues/379) 并分享您的使用案例。
+
+## :page_facing_up: 许可证
+
+OpenIM 根据 Apache 2.0 许可证授权。请查看 [LICENSE](https://github.com/OpenIMSDK/Open-IM-Server/tree/main/LICENSE) 以获取完整的许可证文本。
+
+OpenIM logo，包括其变体和动画版本，在此存储库 [OpenIM](https://github.com/OpenIMSDK/Open-IM-Server) 下的 [assets/logo](./assets/logo) 和 [assets/logo-gif](./assets/logo-gif) 目录中显示，受版权法保护。
+
+## 🔮 感谢我们的贡献者！
+
+<a href="https://github.com/OpenIMSDK/Open-IM-Server/graphs/contributors">   <img src="https://contrib.rocks/image?repo=OpenIMSDK/Open-IM-Server" /> </a>

README.md

@@ -1,16 +1,19 @@
-<h1 align="center" style="border-bottom: none">
-    <b>
-        <a href="https://doc.rentsoft.cn/">Open IM Server</a><br>
-    </b>
-    ⭐️  Open source Instant Messaging Server  ⭐️ <br>
-</h1>
+<p align="center">
+    <a href="https://www.openim.online">
+        <img src="./assets/logo-gif/openim-logo.gif" width="60%" height="30%"/>
+    </a>
+</p>
+
+<h3 align="center" style="border-bottom: none">
+    ⭐️  Open source Instant Messaging Server ⭐️ <br>
+<h3>
 
 
 <p align=center>
 <a href="https://goreportcard.com/report/github.com/OpenIMSDK/Open-IM-Server"><img src="https://goreportcard.com/badge/github.com/OpenIMSDK/Open-IM-Server" alt="A+"></a>
 <a href="https://github.com/OpenIMSDK/Open-IM-Server/issues?q=is%3Aissue+is%3Aopen+sort%3Aupdated-desc+label%3A%22good+first+issue%22"><img src="https://img.shields.io/github/issues/OpenIMSDK/Open-IM-Server/good%20first%20issue?logo=%22github%22" alt="good first"></a>
 <a href="https://github.com/OpenIMSDK/Open-IM-Server"><img src="https://img.shields.io/github/stars/OpenIMSDK/Open-IM-Server.svg?style=flat&logo=github&colorB=deeppink&label=stars"></a>
-<a href="https://join.slack.com/t/openimsdk/shared_invite/zt-1tmoj26uf-_FDy3dowVHBiGvLk9e5Xkg"><img src="https://img.shields.io/badge/Slack-100%2B-blueviolet?logo=slack&amp;logoColor=white"></a>
+<a href="https://join.slack.com/t/openimsdk/shared_invite/zt-1tmoj26uf-_FDy3dowVHBiGvLk9e5Xkg"><img src="https://img.shields.io/badge/Slack-300%2B-blueviolet?logo=slack&amp;logoColor=white"></a>
 <a href="https://github.com/OpenIMSDK/Open-IM-Server/blob/main/LICENSE"><img src="https://img.shields.io/badge/license-Apache--2.0-green"></a>
 <a href="https://golang.org/"><img src="https://img.shields.io/badge/Language-Go-blue.svg"></a>
 </p>
@@ -19,169 +22,371 @@
 
 <p align="center">
     <a href="./README.md"><b> English </b></a> •
-    <a href="./README-zh_CN.md"><b> 中文 </b></a>
+    <a href="./README-zh_CN.md"><b> 简体中文 </b></a> •
+    <a href="https://www.openim.online/en"><b> Docs </b></a>
 </p>
 
+
 </p>
 
-## What is Open-IM-Server
+## ✨ About OpenIM
 
-Instant messaging server. Backend in pure Golang, wire transport protocol is JSON over websocket.
-Everything is a message in Open-IM-Server, so you can extend custom messages easily, there is no need to modify the server code.
-Using microservice architectures, Open-IM-Server can be deployed using clusters.
-By deployment of the Open-IM-Server on the customer's server, developers can integrate instant messaging and real-time network capabilities into their own applications free of charge and quickly, and ensure the security and privacy of business data.
+Open-IM-Server, meticulously developed in pure Golang, is a powerful instant messaging server. Its distinct communication method, employing pb+websocket, views every interaction as a message, streamlining customization without altering server code. Built on a microservice architecture, it offers deployment through clusters for outstanding performance and scalability.
 
-## Features
+Open-IM-Server is more than an instant messaging server; it's a powerful tool for incorporating real-time networking into your applications, positioning itself as your premier choice for integration! 🚀
 
-- Everything in Free
-- Scalable architecture
-- Easy integration
-- Good scalability
-- High performance
-- Lightweight
-- Supports multiple protocols
+Please be aware that Open-IM-Server does not function as a standalone product and does not offer built-in account registration or login services. To ease your implementation process, we've open-sourced the [chat repository](https://github.com/OpenIMSDK/chat), which comprises these features. Deploying this chat business server in conjunction with Open-IM-Server expedites the setup of a comprehensive chat product. 👥
 
-## Community
-- Visit the Chinese official website here: [📚 Open-IM docs](https://www.openim.online/zh)
+Further enhancing your experience, we also provide an SDK client, wherein most complex logics are implemented. The [SDK repository](https://github.com/OpenIMSDK/openim-sdk-core) can be found at [this link](https://github.com/OpenIMSDK/openim-sdk-core). The [chat repository](https://github.com/OpenIMSDK/chat) is our business server while the 'core' represents the high-level encapsulation of the SDK, synergistically working together to deliver superior results. ✨
 
-## Quick start
+## :star2: Why OpenIM
 
-### Installing Open-IM-Server
+**🔍 Function screenshot display**
 
-> Open-IM relies on five open source high-performance components: ETCD, MySQL, MongoDB, Redis, and Kafka. Privatization deployment Before Open-IM-Server, please make sure that the above five components have been installed. If your server does not have the above components, you must first install Missing components. If you have the above components, it is recommended to use them directly. If not, it is recommended to use Docker-compose, no To install dependencies, one-click deployment, faster and more convenient.
+<div align="center">
 
-#### Deploy using Docker
+|            💻🔄📱 Multi Terminal Synchronization 🔄🖥️             |                  📅⚡ Efficient Meetings 🚀💼      |
+| :----------------------------------------------------------: | :---------------------------------------------------------: |
+| ![multiple-message](./assets/demo/multi-terminal-synchronization.png) | ![efficient-meetings](./assets/demo/efficient-meetings.png) |
+|             📲🔄 **One-to-one and Group Chats** 👥🗣️             |        🎁💻 **Special Features - Custom Messages** ✉️🎨|
+|         ![group-chat](./assets/demo/group-chat.png)          |   ![special-function](./assets/demo/special-function.png)      |
 
-1. Install [Go environment](https://golang.org/doc/install). Make sure Go version is at least 1.17
+</div>
 
-2. Clone the Open-IM project to your server
+1. **Comprehensive Message Type Support :speech_balloon:**
 
-   ```
-   git clone https://github.com/OpenIMSDK/Open-IM-Server.git --recursive
-   ```
+   ✅ Supports almost all types of messages, including text, images, emojis, voice, video, geographical location, files, quotes, business cards, system notifications, custom messages and more
 
-3. Deploy
+   ✅ Supports one-on-one and multi-person audio and video calls
 
-    1. Modify env
+   ✅ Provides terminal support for multiple platforms such as iOS, Android, Flutter, uni-app, ReactNative, Electron, Web, H5 
 
-       ```
-       #cd Open-IM-server
-       USER=root  
-       PASSWORD=openIM123    #Password with more than 8 digits, excluding special characters
-       ENDPOINT=http://127.0.0.1:10005 #Replace 127.0.0.1 with Internet IP
-       DATA_DIR=./ 
-       ```
+2. **Efficient Meetings Anytime, Anywhere :earth_americas:**
 
-    2. Deploy && Start
-    
-       ```
-       chmod +x install_im_server.sh;
-       ./install_im_server.sh;
-       ```
-    
-    4. Check service
-    
-       ```
-       cd scripts;
-       ./docker_check_service.sh./check_all.sh
-       ```
-       
-       ![OpenIMServersonSystempng](https://github.com/OpenIMSDK/Open-IM-Server/blob/main/docs/Open-IM-Servers-on-System.png)
+   ✅ Based on IM (Instant Messaging) with 100% reliable forced signaling capabilities, it paves the way for IM systems, deeply integrated with chat applications 
 
-#### Deploy using source code
+   ✅ Supports hundreds of people in a single meeting, with subscription numbers reaching thousands, and server-side audio and video recording 
 
-1. Go 1.17 or above.
-2. Clone
+3. **One-on-one and Group Chats for Various Social Scenarios :busts_in_silhouette:**
 
-```shell
-git clone https://github.com/OpenIMSDK/Open-IM-Server.git --recursive 
-cd cmd/openim-sdk-core
-git checkout main
+   ✅ OpenIM has four roles: application administrator, group owner, group administrator, and regular member 
+
+   ✅ Powerful group features such as muting, group announcements, group validation, unlimited group members, and loading group messages as needed 
+
+4. **Unique Features :star2:**
+
+   ✅ Supports read-and-burn private chats, customizable duration
+
+   ✅ Message editing function broadens social scenarios, making instant communication more diverse and interesting
+
+5. **Open Source :open_hands:**
+
+   ✅ The code of OpenIM is open source, self-controlled data, aimed at building a globally leading IM open source community, including client SDK and server 
+
+   ✅ Based on open source Server, many excellent open source projects have been developed, such as [OpenKF](https://github.com/OpenIMSDK/OpenKF) (Open source AI customer service system) 
+
+6. **Easy to Expand :wrench:**
+
+   ✅ The OpenIM server is implemented in Golang, introducing an innovative "everything is a message" communication model, simplifying the implementation of custom messages and extended features 
+
+7. **High Performance :racing_car:**
+
+   ✅ OpenIM supports a hierarchical governance architecture in the cluster, tested by a large number of users, and abstracts the storage model of online messages, offline messages, and historical messages 
+
+8. **Full Platform Support :tv:**
+
+   ✅ Supports native iOS, Android; cross-platform Flutter, uni-app, ReactNative; major web front-end frameworks such as React, Vue; applets; and PC platforms supported by Electron
+
+9. **The ultimate deployment experience 🤖** 
+
+   ✅  Supports [cluster deployment](https://github.com/OpenIMSDK/Open-IM-Server/edit/main/deployments/README.md)
+
+   ✅  Supports multi-architecture mirroring, our Docker images are hosted not only on GitHub but also on Alibaba Cloud and Docker Hub supporting multiple architectures. Visit [our GitHub packages](https://github.com/orgs/OpenIMSDK/packages?repo_name=Open-IM-Server) and read our [version management document](https://github.com/OpenIMSDK/Open-IM-Server/blob/main/docs/conversions/version.md) for more information.
+
+11. **A large ecosystem of open source communities 🤲**
+
+    ✅  We have tens of thousands of users and many solutions to problems.
+
+    ✅  We have a large open source community called [OpenIMSDK](https://github.com/OpenIMSDK) that runs the core modules, we have an open source community called [openim-sigs](https://github.com/openim-sigs) to explore more IM-based infrastructure products.
+
+## :rocket: Quick Start
+
+You can quickly learn OpenIM engineering solutions,  all it takes is one simple command:
+
+```bash
+$ make demo
 ```
 
-1. Set executable permissions
+🤲 In order to facilitate the user experience, we have provided a variety of deployment solutions, you can choose your own deployment method according to the list below:
 
-```shell
-cd ../../scripts/
-chmod +x *.sh
+<details>   <summary>Deploying with Docker Compose</summary>
+
+
+> docker compose will not be maintained in future versions, but it is still the easiest and most convenient way to organize docker compose deployments into a separate project https://github.com/openim-sigs/openim-docker to maintain.
+
+**1. Clone the project**
+
+
+```bash
+# choose what you need, We take branch 3.2 as an example
+$ BRANCH=release-v3.2
+$ git clone -b $BRANCH https://github.com/OpenIMSDK/Open-IM-Server openim/openim-server && export openim_dir=$(pwd)/openim && cd ${openim_dir}/openim-server
 ```
 
-1. build
+> **Note**
+> If you don't know OpenIM's versioning policy, 📚Read our release policy: https://github.com/OpenIMSDK/Open-IM-Server/blob/main/docs/conversions/version.md
 
-```shell
-./batch_build_all_service.sh
+
+
+**2. Configure the config file**
+
+If you tried to get started quickly with `make demo`, then you know that our config file is generated by automation.
+
+You can use `make init` to quickly initialize a configuration file
+
+```bash
+$ make init
+$ git diff
 ```
 
-all services build success
+Then feel free to modify your current config file,  you can also modify `/scripts/install/environment.sh` document template, `make init` is essentially rendering `environment.sh` template, and then through the `make init` to automatically generate a new configuration.
 
-### CONFIGURATION INSTRUCTIONS
+If you only need to change the config file for a short time, or if you don't want to make any major changes in the future, you can modify the `.env file directly
 
-> Open-IM configuration is divided into basic component configuration and business internal service configuration. Developers need to fill in the address of each component as the address of their server component when using the product, and ensure that the internal service port of the business is not occupied
+```bash
+USER=root 								#no need to modify
+PASSWORD=openIM123  					#A combination of 8 or more numbers and letters, this password applies to redis, mysql, mongo, as well as accessSecret in config/config.yaml
+ENDPOINT=http://127.0.0.1:10005 		#minio's external service IP and port, or use the domain name storage.xx.xx, the app must be able to access this IP and port or domain,
+API_URL=http://127.0.0.1:10002/object/ 	#the app must be able to access this IP and port or domain,
+DATA_DIR=./  							#designate large disk directory
+```
 
-#### Basic Component Configuration Instructions
+**3. Deploy and start**
+
+> **Note**
+>
+> You can deploy either directly with `make install` or with `docker compose up`, the logic is the same
+
+```bash
+$ make install
+# OR
+$ docker-compose up
+```
+
+4. Check the service
+
+```bash
+$ make check
+```
+
+Looking at the command line at this point, there are two items in the output, checking for the start of the component port that OpenIM depends on, and the start of the OpenIM core component
+
+</details> 
+
+<details>  <summary>Compile from Source</summary>
+
+
+Ur need `Go 1.18` or higher version, and `make`.
+
+
+```bash
+go version && make --version || echo "Error: One of the commands failed."
+```
+
+Version Details: https://github.com/OpenIMSDK/Open-IM-Server/blob/main/docs/conversions/version.md
+
+```bash
+# choose what you need
+$ BRANCH=release-v3.1
+$ git clone -b $BRANCH https://github.com/OpenIMSDK/Open-IM-Server openim && export openim=$(pwd)/openim && cd $openim && make start
+```
+
+> `make help` to help you see the instructions supported by OpenIM.
+
+Use `make check` to check all component starts
+
+```bash
+$ make check
+```
+
+You can use the `make help-all` see OpenIM in action.
+
+</details>
+
+<details>  <summary>Component Configuration Instructions</summary>
+The `config/config.yaml` file has detailed configuration instructions for the storage components.
+
+
+The config file is available via [environment.sh](https://github.com/OpenIMSDK/Open-IM-Server/blob/main/scripts/install/environment.sh) configuration [openim.yaml](https://github.com/OpenIMSDK/Open-IM-Server/blob/main/deployments/templates/openim.yaml) template, and then through the `make init` to automatically generate a new configuration.
+
+- Zookeeper
+
+  - Used for RPC service discovery and registration, cluster support.
+
+    ```bash
+    zookeeper:
+      schema: openim                          #Not recommended to modify
+      address: [ 127.0.0.1:2181 ]             #address
+      username:                               #username
+      password:                               #password
+    ```
 
-- ETCD
-    - Etcd is used for the discovery and registration of rpc services, etcd Schema is the prefix of the registered name, it is recommended to modify it to your company name, etcd address (ip+port) supports clustered deployment, you can fill in multiple ETCD addresses separated by commas, and also only one etcd address.
 - MySQL
-    - mysql is used for full storage of messages and user relationships. Cluster deployment is not supported for the time being. Modify addresses and users, passwords, and database names.
+
+  - Used for storing users, relationships, and groups, supports master-slave database.
+
+    ```bash
+    mysql:
+      address: [ 127.0.0.1:13306 ]            #address
+      username: root                          #username
+      password: openIM123                     #password
+      database: openIM_v2                     #Not recommended to modify
+      maxOpenConn: 1000                       #maximum connection
+      maxIdleConn: 100                        #maximum idle connection
+      maxLifeTime: 60                         #maximum time a connection can be reused (seconds)
+      logLevel: 4                             #log level 1=slient 2=error 3=warn 4=info
+      slowThreshold: 500                      #slow statement threshold (milliseconds)
+    ```
+
 - Mongo
-    - Mongo is used for offline storage of messages. The default storage is 7 days. Cluster deployment is temporarily not supported. Just modify the address and database name.
+
+  - Used for storing offline messages, supports mongo sharded clusters.
+
+    ```bash
+    mongo:
+      uri:                                    #Use this value directly if not empty
+      address: [ 127.0.0.1:37017 ]            #address
+      database: openIM                        #default mongo db
+      username: root                          #username
+      password: openIM123                     #password
+      maxPoolSize: 100                        #maximum connections
+    ```
+
 - Redis
-    - Redis is currently mainly used for message serial number storage and user token information storage. Cluster deployment is temporarily not supported. Just modify the corresponding redis address and password.
+
+  - Used for storing message sequence numbers, latest messages, user tokens, and mysql cache, supports cluster deployment.
+
+    ```bash
+    redis:
+      address: [ 127.0.0.1:16379 ]            #address
+      username:                               #username
+      password: openIM123                     #password
+    ```
+
 - Kafka
-    - Kafka is used as a message transfer storage queue to support cluster deployment, just modify the corresponding address
 
-#### Internal Service Configuration Instructions
+  - Used for message queues, for message decoupling, supports cluster deployment.
 
-- credential&&push
-    - The Open-IM needs to use the three-party offline push function. Currently, Tencent's three-party push is used. It supports IOS, Android and OSX push. This information is some registration information pushed by Tencent. Developers need to go to Tencent Cloud Mobile Push to register the corresponding information. If you do not fill in the corresponding information, you cannot use the offline message push function
-- api&&rpcport&&longconnsvr&&rpcregistername
-    - The api port is the http interface, longconnsvr is the websocket listening port, and rpcport is the internal service startup port. Both support cluster deployment. Make sure that these ports are not used. If you want to open multiple services for a single service, fill in multiple ports separated by commas. rpcregistername is the service name registered by each service to the registry etcd, no need to modify
-- log&&modulename
-    - The log configuration includes the storage path of the log file, and the log is sent to elasticsearch for log viewing. Currently, the log is not supported to be sent to elasticsearch. The configuration does not need to be modified for the time being. The modulename is used to split the log according to the name of the service module. The default configuration is fine.
-- multiloginpolicy&&tokenpolicy
-    - Open-IM supports multi-terminal login. Currently, there are three multi-terminal login policies. The PC terminal and the mobile terminal are online at the same time by default. When multiple policies are configured to be true, the first policy with true is used by default, and the token policy is the generated token policy. , The developer can customize the expiration time of the token
+    ```bash
+    kafka:
+      username:                               #username
+      password:                               #password
+      addr: [ 127.0.0.1:9092 ]                #address
+      latestMsgToRedis:
+        topic: "latestMsgToRedis"
+      offlineMsgToMongo:
+        topic: "offlineMsgToMongoMysql"
+      msgToPush:
+        topic: "msqToPush"
+      msgToModify:
+        topic: "msgToModify"
+      consumerGroupID:
+        msgToRedis: redis
+        msgToMongo: mongo
+        msgToMySql: mysql
+        msgToPush: push
+        msgToModify: modify
+    ```
 
-### scripts DESCRIPTION
+</details>
 
-> Open-IM scripts provides service compilation, start, and stop scripts. There are four Open-IM scripts start modules, one is the http+rpc service start module, the second is the websocket service start module, then the msg_transfer module, and the last is the push module
-
-- path_info.cfg&&style_info.cfg&&functions.sh
-    - Contains the path information of each module, including the path where the source code is located, the name of the service startup, the shell print font style, and some functions for processing shell strings
-- build_all_service.sh
-    - Compile the module, compile all the source code of Open-IM into a binary file and put it into the bin directory
-- start_rpc_api_service.sh&&msg_gateway_start.sh&&msg_transfer_start.sh&&push_start.sh
-    - Independent scripts startup module, followed by api and rpc modules, message gateway module, message transfer module, and push module
-- start_all.sh&&stop_all.sh
-    - Total scripts, start all services and close all services
-
-## Authentication Clow Chart 
-
-![avatar](https://github.com/OpenIMSDK/Open-IM-Server/blob/main/docs/open-im-server.png)
-
-## Architecture
-
-![avatar](https://github.com/OpenIMSDK/Open-IM-Server/blob/main/docs/Architecture.jpg)
-
-## To start developing OpenIM
-The [community repository](https://github.com/OpenIMSDK/community) hosts all information about building Kubernetes from source, how to contribute code and documentation, who to contact about what, etc.
+<details>  <summary>Deployed with kubernetes</summary>
 
 
-## Contributing
+read: https://github.com/OpenIMSDK/Open-IM-Server/blob/main/deployments/README.md
 
-Contributions to this project are welcome! Please see [CONTRIBUTING.md](./CONTRIBUTING.md) for details.
+</details> 
 
-## Community Meetings
-We want anyone to get involved in our community, we offer gifts and rewards, and we welcome you to join us every Thursday night.
-
-We take notes of each [biweekly meeting](https://github.com/OpenIMSDK/Open-IM-Server/issues/381) in [GitHub discussions](https://github.com/OpenIMSDK/Open-IM-Server/discussions/categories/meeting), and our minutes are written in [Google Docs](https://docs.google.com/document/d/1nx8MDpuG74NASx081JcCpxPgDITNTpIIos0DS6Vr9GU/edit?usp=sharing).
+<details>  <summary>Open IM Ports</summary>
 
 
-## Who are using Open-IM-Server
-The [user case studies](https://github.com/OpenIMSDK/community/blob/main/ADOPTERS.md) page includes the user list of the project. You can leave a [📝comment](https://github.com/OpenIMSDK/Open-IM-Server/issues/379) to let us know your use case.
+| TCP Port  | Description                                                  | Operation                                             |
+| --------- | ------------------------------------------------------------ | ----------------------------------------------------- |
+| TCP:10001 | ws protocol, message port such as message sending, pushing etc, used for client SDK | Port release or nginx reverse proxy, and firewall off |
+| TCP:10002 | api port, such as user, friend, group, message interfaces.   | Port release or nginx reverse proxy, and firewall off |
+| TCP:10005 | Required when choosing minio storage (openIM uses minio storage by default) | Port release or nginx reverse proxy, and firewall off |
 
-![avatar](https://github.com/OpenIMSDK/OpenIM-Docs/blob/main/docs/images/WechatIMG20.jpeg)
+</details> 
 
-## License
+<details>  <summary>Open Chat Ports</summary>
 
-Open-IM-Server is under the Apache 2.0 license. See the [LICENSE](./LICENSE) file for details
+
++ chat warehouse: https://github.com/OpenIMSDK/chat 
+
+| TCP Port  | Description                                         | Operation                                             |
+| --------- | --------------------------------------------------- | ----------------------------------------------------- |
+| TCP:10008 | Business system, such as registration, login etc    | Port release or nginx reverse proxy, and firewall off |
+| TCP:10009 | Management backend, such as statistics, banning etc | Port release or nginx reverse proxy, and firewall off |
+
+</details>
+
+
+## :link: Relationship Between APP and OpenIM
+
+OpenIM isn't just an open-source instant messaging component, it's an integral part of your application ecosystem. Check out this diagram to understand how AppServer, AppClient, Open-IM-Server, and Open-IM-SDK interact.
+
+![App-OpenIM Relationship](https://github.com/OpenIMSDK/Open-IM-Server/blob/main/docs/images/open-im-server.png)
+
+## :building_construction: Overall Architecture
+
+Delve into the heart of Open-IM-Server's functionality with our architecture diagram.
+
+![Overall Architecture](https://github.com/OpenIMSDK/Open-IM-Server/blob/main/docs/images/Architecture.jpg)
+
+## :hammer_and_wrench: To start developing OpenIM
+
+OpenIM Our goal is to build a top-level open source community. We have a set of standards, in the [Community repository](https://github.com/OpenIMSDK/community).
+
+If you'd like to contribute to this Open-IM-Server repository, please read our [contributor documentation](https://github.com/OpenIMSDK/Open-IM-Server/blob/main/CONTRIBUTING.md).
+
+Before you start, please make sure your changes are in demand. The best for that is to create a [new discussion](https://github.com/OpenIMSDK/Open-IM-Server/discussions/new/choose) OR [Slack Communication](https://join.slack.com/t/openimsdk/shared_invite/zt-1tmoj26uf-_FDy3dowVHBiGvLk9e5Xkg), or if you find an issue, [report it](https://github.com/OpenIMSDK/Open-IM-Server/issues/new/choose) first.
+
+- [Code Standards](https://github.com/OpenIMSDK/Open-IM-Server/blob/main/docs/conversions/go_code.md)
+- [Docker Images Standards](https://github.com/OpenIMSDK/Open-IM-Server/blob/main/docs/conversions/images.md)
+- [Directory Standards](https://github.com/OpenIMSDK/Open-IM-Server/blob/main/docs/conversions/directory.md)
+- [Commit Standards](https://github.com/OpenIMSDK/Open-IM-Server/blob/main/docs/conversions/commit.md)
+- [Versioning Standards](https://github.com/OpenIMSDK/Open-IM-Server/blob/main/docs/conversions/version.md)
+- [Interface Standards](https://github.com/OpenIMSDK/Open-IM-Server/blob/main/docs/conversions/api.md)
+- [Log Standards](https://github.com/OpenIMSDK/Open-IM-Server/blob/main/docs/conversions/log.md)
+- [Error Code Standards](https://github.com/OpenIMSDK/Open-IM-Server/blob/main/docs/conversions/error_code.md)
+
+## :busts_in_silhouette: Community
+
++ 📚 [OpenIM Community](https://github.com/OpenIMSDK/community)
++ 💕 [OpenIM Interest Group](https://github.com/Openim-sigs)
++ 🚀 [Join our Slack community](https://join.slack.com/t/openimsdk/shared_invite/zt-1tmoj26uf-_FDy3dowVHBiGvLk9e5Xkg)
++ :eyes: [Join our wechat (微信群)](https://openim-1253691595.cos.ap-nanjing.myqcloud.com/WechatIMG20.jpeg)
+
+## :calendar: Community Meetings
+
+We want anyone to get involved in our community and contributing code, we offer gifts and rewards, and we welcome you to join us every Thursday night.
+
+Our conference is in the [OpenIM Slack](https://join.slack.com/t/openimsdk/shared_invite/zt-1tmoj26uf-_FDy3dowVHBiGvLk9e5Xkg) 🎯, then you can search the Open-IM-Server pipeline to join
+
+We take notes of each [biweekly meeting](https://github.com/orgs/OpenIMSDK/discussions/categories/meeting) in [GitHub discussions](https://github.com/OpenIMSDK/Open-IM-Server/discussions/categories/meeting), Our historical meeting notes, as well as replays of the meetings are available at [Google Docs :bookmark_tabs:](https://docs.google.com/document/d/1nx8MDpuG74NASx081JcCpxPgDITNTpIIos0DS6Vr9GU/edit?usp=sharing).
+
+## :eyes: Who are using OpenIM
+
+Check out our [user case studies](https://github.com/OpenIMSDK/community/blob/main/ADOPTERS.md) page for a list of the project users. Don't hesitate to leave a [📝comment](https://github.com/OpenIMSDK/Open-IM-Server/issues/379) and share your use case.
+
+## :page_facing_up: License
+
+OpenIM is licensed under the Apache 2.0 license. See [LICENSE](https://github.com/OpenIMSDK/Open-IM-Server/tree/main/LICENSE) for the full license text.
+
+The OpenIM logo, including its variations and animated versions, displayed in this repository [OpenIM](https://github.com/OpenIMSDK/Open-IM-Server) under the [assets/logo](./assets/logo) and [assets/logo-gif](assets/logo-gif) directories, are protected by copyright laws.
+
+## 🔮 Thanks to our contributors!
+
+<a href="https://github.com/OpenIMSDK/Open-IM-Server/graphs/contributors">
+  <img src="https://contrib.rocks/image?repo=OpenIMSDK/Open-IM-Server" />
+</a>

assets/README.md

@@ -0,0 +1,32 @@
+# `/assets`
+
+The `/assets` directory in the OpenIM repository contains various assets such as images, logos, and animated GIFs. These assets serve different purposes and contribute to the functionality and aesthetics of the OpenIM project.
+
+## Directory Structure:
+
+```bash
+assets/
+├── README.md                     # Documentation for the assets directory
+├── images                        # Directory holding images related to OpenIM
+│   ├── architecture.png          # Image depicting the architecture of OpenIM
+│   └── mvc.png                   # Image illustrating the Model-View-Controller (MVC) pattern
+├── intive-slack.png              # Image displaying the Intive Slack logo
+├── logo                          # Directory containing various logo variations for OpenIM
+│   ├── openim-logo-black.png     # OpenIM logo with a black background
+│   ├── openim-logo-blue.png      # OpenIM logo with a blue background
+│   ├── openim-logo-green.png     # OpenIM logo with a green background
+│   ├── openim-logo-purple.png    # OpenIM logo with a purple background
+│   ├── openim-logo-white.png     # OpenIM logo with a white background
+│   ├── openim-logo-yellow.png    # OpenIM logo with a yellow background
+│   └── openim-logo.png           # OpenIM logo with a transparent background
+└── logo-gif                      # Directory containing animated GIF versions of the OpenIM logo
+    └── openim-log.gif            # Animated OpenIM logo with a transparent background
+```
+
+## Copyright Notice:
+
+The OpenIM logo, including its variations and animated versions, displayed in this repository [OpenIM](https://github.com/OpenIMSDK/openim) under the `/assets/logo` and `/assets/logo-gif` directories, are protected by copyright laws.
+
+The logo design is credited to @Xx(席欣).
+
+Please respect the intellectual property rights and refrain from unauthorized use and distribution of these assets.

assets/demo/README.md

@@ -0,0 +1,14 @@
+## :star2: Why OpenIM
+
+**🔍 Function screenshot display**
+
+<div align="center">
+
+
+|             multiple message              |               Efficient meetings                |
+| :---------------------------------------: | :---------------------------------------------: |
+| ![multiple-message](./multiple-message.png) | ![efficient-meetings](./efficient-meetings.png) |
+|      **One-to-one and group chats**       |     **Special features - Custom messages**      |
+|      ![group-chat](./group-chat.png)      |   ![special-function](./special-function.png)    |
+
+</div>

assets/logo-gif/LICENSE

@@ -0,0 +1 @@
+# The OpenIM logo files are licensed under a choice of either Apache-2.0 or CC-BY-4.0 (Creative Commons Attribution 4.0 International).

assets/logo/LICENSE

@@ -0,0 +1 @@
+# The OpenIM logo files are licensed under a choice of either Apache-2.0 or CC-BY-4.0 (Creative Commons Attribution 4.0 International).

build/README.md

@@ -0,0 +1,65 @@
+# Building OpenIM
+
+Building OpenIM is easy if you take advantage of the containerized build environment. This document will help guide you through understanding this build process.
+
+## Requirements
+
+1. Docker, using one of the following configurations:
+  * **macOS** Install Docker for Mac. See installation instructions [here](https://docs.docker.com/docker-for-mac/).
+     **Note**: You will want to set the Docker VM to have at least 4GB of initial memory or building will likely fail.
+  * **Linux with local Docker**  Install Docker according to the [instructions](https://docs.docker.com/installation/#installation) for your OS.
+  * **Windows with Docker Desktop WSL2 backend**  Install Docker according to the [instructions](https://docs.docker.com/docker-for-windows/wsl-tech-preview/). Be sure to store your sources in the local Linux file system, not the Windows remote mount at `/mnt/c`.
+  
+  **Note**: You will need to check if Docker CLI plugin buildx is properly installed (`docker-buildx` file should be present in `~/.docker/cli-plugins`). You can install buildx according to the [instructions](https://github.com/docker/buildx/blob/master/README.md#installing).
+
+2. **Optional** [Google Cloud SDK](https://developers.google.com/cloud/sdk/)
+
+You must install and configure Google Cloud SDK if you want to upload your release to Google Cloud Storage and may safely omit this otherwise.
+
+## Actions
+
+About [Images packages](https://github.com/orgs/OpenIMSDK/packages?repo_name=Open-IM-Server)
+
+All files in the `build/images` directory are not templated and are instead rendered by Github Actions, which is an automated process.
+
+Trigger condition:
+1. create a new tag with the format `vX.Y.Z` (e.g. `v1.0.0`)
+2. push the tag to the remote repository
+3. wait for the build to finish
+4. download the artifacts from the release page
+
+## Make images
+
+**help info:**
+
+```bash
+$ make image.help
+```
+
+**build images:**
+
+```bash
+$ make image
+```
+
+## Overview
+
+While it is possible to build OpenIM using a local golang installation, we have a build process that runs in a Docker container.  This simplifies initial set up and provides for a very consistent build and test environment.
+
+
+## Basic Flow
+
+The scripts directly under [`build/`](.) are used to build and test.  They will ensure that the `kube-build` Docker image is built (based on [`build/build-image/Dockerfile`](build-image/Dockerfile) and after base image's `KUBE_BUILD_IMAGE_CROSS_TAG` from Dockerfile is replaced with one of those actual tags of the base image, like `v1.13.9-2`) and then execute the appropriate command in that container.  These scripts will both ensure that the right data is cached from run to run for incremental builds and will copy the results back out of the container. You can specify a different registry/name and version for `kube-cross` by setting `KUBE_CROSS_IMAGE` and `KUBE_CROSS_VERSION`, see [`common.sh`](common.sh) for more details.
+
+The `kube-build` container image is built by first creating a "context" directory in `_output/images/build-image`.  It is done there instead of at the root of the OpenIM repo to minimize the amount of data we need to package up when building the image.
+
+There are 3 different containers instances that are run from this image.  The first is a "data" container to store all data that needs to persist across to support incremental builds. Next there is an "rsync" container that is used to transfer data in and out to the data container.  Lastly there is a "build" container that is used for actually doing build actions.  The data container persists across runs while the rsync and build containers are deleted after each use.
+
+`rsync` is used transparently behind the scenes to efficiently move data in and out of the container.  This will use an ephemeral port picked by Docker.  You can modify this by setting the `KUBE_RSYNC_PORT` env variable.
+
+All Docker names are suffixed with a hash derived from the file path (to allow concurrent usage on things like CI machines) and a version number.  When the version number changes all state is cleared and clean build is started.  This allows the build infrastructure to be changed and signal to CI systems that old artifacts need to be deleted.
+
+## Build artifacts
+The build system output all its products to a top level directory in the source repository named `_output`.
+These include the binary compiled packages (e.g. kubectl, kube-scheduler etc.) and archived Docker images.
+If you intend to run a component with a docker image you will need to import it from this directory with