fix: config env command

Signed-off-by: Xinwei Xiong(cubxxw-openim) <3293172751nss@gmail.com>

.docker-compose_cfg/config.yaml

@@ -1,3 +1,17 @@
+# Copyright © 2023 OpenIM. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
 #---------------Infrastructure configuration---------------------#
 etcd:
   etcdSchema: openim  #默认即可

.docker-compose_cfg/datasource-compose.yaml

@@ -1,3 +1,17 @@
+# Copyright © 2023 OpenIM. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
 #more datasource-compose.yaml 
 apiVersion: 1
 

.docker-compose_cfg/grafana.ini

@@ -633,7 +633,7 @@ active_sync_enabled = true
 #################################### AWS ###########################
 [aws]
 # Enter a comma-separated list of allowed AWS authentication providers.
-# Options are: default (AWS SDK Default), keys (Access && secret key), credentials (Credentials field), ec2_iam_role (EC2 IAM Role)
+# Options are: default (AWS SDK Default), keys (Access && secret key), credentials (Credentials field), ec2_iam_role (EC2 OpenIM Role)
 allowed_auth_providers = default,keys,credentials
 
 # Allow AWS users to assume a role using temporary security credentials.

.docker-compose_cfg/prometheus-compose.yml

@@ -1,3 +1,17 @@
+# Copyright © 2023 OpenIM. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
 #more prometheus-compose.yml 
 global:
   scrape_interval:     15s 

.dockerignore

@@ -0,0 +1,31 @@
+# Ignore files and directories starting with a dot
+
+# Ignore specific files
+.dockerignore
+
+# Ignore build artifacts
+_output/
+logs/
+
+# Ignore non-essential documentation
+README.md
+README-zh_CN.md
+CONTRIBUTING.md
+CHANGELOG/
+# LICENSE
+
+# Ignore testing and linting configuration
+.golangci.yml
+
+# Ignore deployment-related files
+docker-compose.yaml
+deployments/
+
+# Ignore assets
+assets/
+
+# Ignore components
+components/
+
+# Ignore tools and scripts
+.github/

.env

@@ -1,4 +1,5 @@
 USER=root
 PASSWORD=openIM123
-MINIO_ENDPOINT=http://127.0.0.1:10005
-DATA_DIR=./
+MINIO_ENDPOINT=http://113.99.98.99:10005
+API_URL=http://113.99.98.99:10002/object/
+DATA_DIR=./

.github/.codecov.yml

@@ -1,3 +1,17 @@
+# Copyright © 2023 OpenIM. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
 coverage:
   status:
     project:

.github/labels.yml

@@ -1,3 +1,17 @@
+# Copyright © 2023 OpenIM. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
 # Refer to Kubernetes for size/* Settings
 # https://github.com/Kubernetes/Kubernetes
 XS:

.github/sync.yml

@@ -1,3 +1,17 @@
+# Copyright © 2023 OpenIM. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
 # https://github.com/BetaHuhn/repo-file-sync-action
 # Synchronization for the.github repository
 OpenIMSDK/.github:
@@ -28,6 +42,9 @@ OpenIMSDK/openim-sdk-core:
   - source: .github/workflows/stale.yml
     dest: .github/workflows/stale.yml
     replace: false
+  - source: .github/.codecov.yml
+    dest: .github/.codecov.yml
+    replace: false
 
 OpenIMSDK/OpenIM-Docs:
   - source: .github/workflows/
@@ -38,6 +55,9 @@ OpenIMSDK/OpenIM-Docs:
   - source: scripts/githooks/
     dest: scripts/githooks/
     replace: true
+  - source: .github/.codecov.yml
+    dest: .github/.codecov.yml
+    replace: false
 
 OpenIMSDK/OpenKF:
   - source: LICENSE
@@ -51,6 +71,9 @@ OpenIMSDK/OpenKF:
   - source: .github/workflows/stale.yml
     dest: .github/workflows/stale.yml
     replace: false
+  - source: .github/.codecov.yml
+    dest: .github/.codecov.yml
+    replace: false
 
 group:
   # first group：common to all warehouses
@@ -58,6 +81,10 @@ group:
   - repos: |
       OpenIMSDK/OpenKF@main
       OpenIMSDK/openim-miniprogram-demo@main
+      OpenIMSDK/docs
+      OpenIMSDK/chat
+      OpenIMSDK/community
+      OpenIMSDK/openim-charts
       OpenIMSDK/openim-sdk-cpp@main
     files: 
       - source: LICENSE
@@ -71,10 +98,22 @@ group:
         replace: false
       - source: .github/workflows/project-progress.yml
         dest: .github/workflows/project-progress.yml
-        replace: false
+        replace: false 
       - source: .github/workflows/help-comment-issue.yml
         dest: .github/workflows/help-comment-issue.yml
         replace: false
+      - source: .github/.codecov.yml
+        dest: .github/.codecov.yml
+        replace: false
+      - source: .github/workflows/cla.yml
+        dest: .github/workflows/cla.yml
+        replace: false
+      - source: .github/workflows/auto-assign-issue.yml
+        dest: .github/workflows/auto-assign-issue.yml
+        replace: false
+      - source: .github/workflows/release.yml
+        dest: .github/workflows/release.yml
+        replace: false
       - source: ./scripts/githooks/
         dest: ./scripts/githooks/
         replace: true

.github/weekly-digest.yml

@@ -0,0 +1,21 @@
+# Copyright © 2023 OpenIM. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# https://github.com/apps/weekly-digest/installations/new
+publishDay: sun
+canPublishIssues: true
+canPublishPullRequests: true
+canPublishContributors: true
+canPublishStargazers: true
+canPublishCommits: true

.github/workflows/auto-assign-issue.yml

@@ -0,0 +1,43 @@
+# Copyright © 2023 OpenIM open source community. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+name: Assign issue to comment author
+on:
+  issue_comment:
+    types: [created]
+jobs:
+  assign-issue:
+    if: |
+      contains(github.event.comment.body, '/assign') || contains(github.event.comment.body, '/accept') &&
+      !contains(github.event.comment.user.login, 'openimbot') &&
+      !contains(github.event.comment.user.login, 'kubbot')
+    runs-on: ubuntu-latest
+    permissions:
+      issues: write
+    steps:
+      - name: Checkout code
+        uses: actions/checkout@v3
+
+      - name: Assign the issue
+        run: |
+          export LETASE_MILESTONES=$(curl 'https://api.github.com/repos/$OWNER/$PEPO/milestones' | jq -r 'last(.[]).title')
+          gh issue edit ${{ github.event.issue.number }} --add-assignee "${{ github.event.comment.user.login }}"
+          gh issue edit ${{ github.event.issue.number }} --add-label "triage/accepted"
+          gh issue edit ${{ github.event.issue.number }} --milestone "$LETASE_MILESTONES"
+          gh issue comment $ISSUE --body "@${{ github.event.comment.user.login }} Glad to see you accepted this issue🤲, this issue has been assigned to you. I set the milestones for this issue to [$LETASE_MILESTONES](https://github.com/$OWNER/$PEPO/milestones), We are looking forward to your PR!"
+        env:
+          GH_TOKEN: ${{ secrets.REDBOT_GITHUB_TOKEN }}
+          ISSUE: ${{ github.event.issue.html_url }}
+          OWNER: ${{ github.repository_owner }}
+          REPO: ${{ github.event.repository.name }}

.github/workflows/auto-gh-pr.yml

@@ -0,0 +1,70 @@
+# Copyright © 2023 OpenIM open source community. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+name: Auto PR to release
+
+on:
+  pull_request:
+    # types:
+    #   - closed
+
+jobs:
+  create-pr:
+    runs-on: ubuntu-latest
+    if: github.event.pull_request.base.ref == 'main'
+    steps:
+        - name: Check out code
+          uses: actions/checkout@v3
+          with:
+            fetch-depth: 0
+
+        - name: Setup GitHub CLI
+          run: |
+            sudo apt-key adv --keyserver keyserver.ubuntu.com --recv-key C99B11DEB97541F0
+            sudo apt-add-repository https://cli.github.com/packages
+            sudo apt-get update
+            sudo apt-get install gh
+          continue-on-error: true
+
+        # - name: Configure GitHub CLI
+        #   run: |
+        #     git config --global user.email "3293172751ysy@gmail.com"
+        #     git config --global user.name "kubbot"
+        #     echo "${{ secrets.BOT_GITHUB_TOKEN }}" | gh auth login --with-token
+        - name: Create PR to release branch
+          run: |
+            ISSUEID=$(gh pr view ${{ github.event.pull_request.number }} --repo $OWNER/$REPO | grep -oP 'Fixes #\K\d+')
+            echo "===========> $ISSUEID"
+            ISSUE=$(gh issue view $ISSUEID --repo $OWNER/$REPO --json labels,assignees,milestone,title)
+            echo "===========> $ISSUE"
+
+            LABELS=$(echo $ISSUE | jq -r '.labels[] | select(.name) | .name' | jq -R -r -s -c 'split("\n")[:-1] | join(",")')
+            ASSIGNEES=$(echo $ISSUE | jq -r '.assignees[] | select(.login) | .login' | jq -R -s -c 'split("\n")[:-1] | join(",")')
+            MILESTONE=$(echo $ISSUE | jq -r '.milestone | select(.title) | .title')
+            TITLE=$(echo $ISSUE | jq -r '.title')
+
+            gh pr edit ${{ github.event.pull_request.number }} --repo $OWNER/$REPO --add-label "$LABELS" --add-assignee "$ASSIGNEES" --milestone "$MILESTONE"
+
+            git checkout -b bot/merge-to-release-$ISSUEID
+            git push origin bot/merge-to-release-$ISSUEID
+            gh pr create --base release --head bot/merge-to-release-$ISSUEID --title "Merge main to release" --body ""
+            
+            # gh pr create --base main --head feat/auto-release-pr-624  --title "The bug is fixed" --body "$x" --repo OpenIMSDK/Open-IM-Server --reviewer "cubxxw"
+          continue-on-error: true
+          env:
+              GITHUB_TOKEN: ${{ secrets.BOT_GITHUB_TOKEN }}
+              GH_TOKEN: ${{ github.token }}
+              ISSUE: ${{ github.event.issue.html_url }}
+              OWNER: ${{ github.repository_owner }}
+              REPO: ${{ github.event.repository.name }}

.github/workflows/auto-invite.yml

@@ -1,3 +1,17 @@
+# Copyright © 2023 OpenIM open source community. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
 name: Invite users to join our group
 on:
   issue_comment:

.github/workflows/bot-auto-cherry-pick.yml

@@ -0,0 +1,67 @@
+# Copyright © 2023 OpenIM. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+name: 'Github Rebot for Cherry Pick when PR is merged'
+on:
+  pull_request_target:
+    types:
+      - closed
+
+jobs:
+  comment:
+    runs-on: ubuntu-latest
+    steps:
+      - name: Comment cherry-pick command
+        uses: actions/github-script@v5
+        with:
+          script: |
+            const pr = context.payload.pull_request;
+            if (!pr.merged) {
+              console.log("PR is not merged. Skipping...");
+              return;
+            }
+            if (!pr.milestone || !pr.milestone.title) {
+              console.log("Milestone is not set. Skipping...");
+              return;
+            }
+            const milestone = pr.milestone.title;
+            const ref = `heads/release-${milestone}`;
+            let branchExists;
+            try {
+              await github.rest.git.getRef({
+                owner: context.repo.owner,
+                repo: context.repo.repo,
+                ref: ref
+              });
+              branchExists = true;
+            } catch (error) {
+              if (error.status === 404) {
+                console.log(`Branch ${ref} does not exist. Skipping...`);
+                branchExists = false;
+              } else {
+                throw error; // Rethrow if it's another error
+              }
+            }
+            if (!branchExists) {
+              return;
+            }
+            const cherryPickCmd = `/cherry-pick release-${milestone}`;
+            console.log(`Adding comment: ${cherryPickCmd}`);
+            await github.rest.issues.createComment({
+              owner: context.repo.owner,
+              repo: context.repo.repo,
+              issue_number: pr.number,
+              body: cherryPickCmd
+            });
+          github-token: ${{ secrets.BOT_GITHUB_TOKEN }}

.github/workflows/bot-cherry-pick.yml

@@ -0,0 +1,33 @@
+# Copyright © 2023 OpenIM open source community. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+name: Github Rebot for Cherry Pick On Comment
+on:
+  issue_comment:
+    types: [created]
+jobs:
+  cherry-pick:
+    name: Cherry Pick
+    if: github.event.issue.pull_request != '' && contains(github.event.comment.body, '/cherry-pick') && github.event.comment.user.login=='kubbot'
+    runs-on: ubuntu-latest
+    steps:
+      - name: Checkout the latest code
+        uses: actions/checkout@v2
+        with:
+          token: ${{ secrets.BOT_GITHUB_TOKEN }}
+          fetch-depth: 0 # otherwise, you will fail to push refs to dest repo
+      - name: Automatic Cherry Pick
+        uses: vendoo/gha-cherry-pick@v1
+        env:
+          GITHUB_TOKEN: ${{ secrets.BOT_GITHUB_TOKEN }}

.github/workflows/build-docker-image.yml

@@ -0,0 +1,100 @@
+# Copyright © 2023 OpenIM open source community. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+name: Publish Docker image
+
+on:
+  push:
+    branches:
+      - main
+      - release-*
+    tags:
+      - v*
+  workflow_dispatch:
+
+jobs:
+  build:
+    runs-on: ubuntu-latest
+    steps:
+      - name: Check out the repo
+        uses: actions/checkout@v3
+
+      - name: Build OpenIM Server
+        run: |
+          sudo make build
+
+# docker.io/openim/openim-server:latest
+      - name: Extract metadata (tags, labels) for Docker
+        id: meta
+        uses: docker/metadata-action@v4.6.0
+        with:
+          images: openim/openim-server
+
+      - name: Log in to Docker Hub
+        uses: docker/login-action@v2
+        with:
+          username: ${{ secrets.DOCKER_USERNAME }}
+          password: ${{ secrets.DOCKER_PASSWORD }}
+
+      - name: Build and push Docker image
+        uses: docker/build-push-action@v4
+        with:
+          context: .
+          push: ${{ github.event_name != 'pull_request' }}
+          tags: ${{ steps.meta.outputs.tags }}
+          labels: ${{ steps.meta.outputs.labels }}
+
+# registry.cn-hangzhou.aliyuncs.com/openimsdk/openim-server:latest
+      - name: Extract metadata (tags, labels) for Docker
+        id: meta2
+        uses: docker/metadata-action@v4.6.0
+        with:
+          images: registry.cn-hangzhou.aliyuncs.com/openimsdk/openim-server
+
+      - name: Log in to AliYun Docker Hub
+        uses: docker/login-action@v2
+        with:
+          registry: registry.cn-hangzhou.aliyuncs.com
+          username: ${{ secrets.ALIREGISTRY_USERNAME }}
+          password: ${{ secrets.ALIREGISTRY_TOKEN }}
+      
+      - name: Build and push Docker image
+        uses: docker/build-push-action@v4
+        with:
+          context: .
+          push: ${{ github.event_name != 'pull_request' }}
+          tags: ${{ steps.meta2.outputs.tags }}
+          labels: ${{ steps.meta2.outputs.labels }}
+
+# ghcr.io/openimsdk/openim-server:latest
+      - name: Extract metadata (tags, labels) for Docker
+        id: meta3
+        uses: docker/metadata-action@v4.6.0
+        with:
+          images: ghcr.io/openimsdk/openim-server
+
+      - name: Log in to GitHub Container Registry
+        uses: docker/login-action@v2
+        with:
+          registry: ghcr.io
+          username: ${{ github.actor }}
+          password: ${{ secrets.GITHUB_TOKEN }}
+
+      - name: Build and push Docker image
+        uses: docker/build-push-action@v4
+        with:
+          context: .
+          push: ${{ github.event_name != 'pull_request' }}
+          tags: ${{ steps.meta3.outputs.tags }}
+          labels: ${{ steps.meta3.outputs.labels }}

.github/workflows/check-coverage.yml

@@ -1,45 +1,59 @@
-# name: Check-Coverage
+# Copyright © 2023 OpenIM open source community. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
 
-# on:
-#   workflow_dispatch:
-#   push:
-#     branches: [ "main" ]
-#     paths-ignore:
-#       - "docs/**"
-#       - "**/*.md"
-#       - "**/*.yaml"
-#       - "CONTRIBUTORS"
-#       - "CHANGELOG/**"
-#   pull_request:
-#     branches: [ "*" ]
-#     paths-ignore:
-#       - "docs/**"
-#       - "**/*.md"
-#       - "**/*.yaml"
-#       - "CONTRIBUTORS"
-#       - "CHANGELOG/**"
-# env:
-#   # Common versions
-#   GO_VERSION: "1.20"
+name: Check-Coverage
 
-# jobs:
-#   coverage:
-#     runs-on: ubuntu-20.04
-#     steps:
-#       - name: Checkout
-#         uses: actions/checkout@v3
+on:
+  workflow_dispatch:
+  push:
+    branches: [ "main" ]
+    paths-ignore:
+      - "docs/**"
+      - "**/*.md"
+      - "**/*.yaml"
+      - "CONTRIBUTORS"
+      - "CHANGELOG/**"
+  pull_request:
+    branches: [ "*" ]
+    paths-ignore:
+      - "docs/**"
+      - "**/*.md"
+      - "**/*.yaml"
+      - "CONTRIBUTORS"
+      - "CHANGELOG/**"
+env:
+  # Common versions
+  GO_VERSION: "1.20"
 
-#       - name: Setup Golang with cache
-#         uses: magnetikonline/action-golang-cache@v3
-#         with:
-#           go-version: ${{ env.GO_VERSION }}
-#           token: ${{ secrets.BOT_GITHUB_TOKEN }}
+jobs:
+  coverage:
+    runs-on: ubuntu-20.04
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v3
 
-#       - name: Install Dependencies
-#         run: sudo apt update && sudo apt install -y libgpgme-dev libbtrfs-dev libdevmapper-dev
+      - name: Setup Golang with cache
+        uses: magnetikonline/action-golang-cache@v3
+        with:
+          go-version: ${{ env.GO_VERSION }}
 
-#       - name: Run Cover
-#         run: make cover
+      - name: Install Dependencies
+        run: sudo apt update && sudo apt install -y libgpgme-dev libbtrfs-dev libdevmapper-dev
 
-#       - name: Upload Coverage to Codecov
-#         uses: codecov/codecov-action@v3
+      - name: Run Cover
+        run: make cover
+        continue-on-error: true
+
+      - name: Upload Coverage to Codecov
+        uses: codecov/codecov-action@v3

.github/workflows/cla.yml

@@ -0,0 +1,62 @@
+# Copyright © 2023 OpenIM open source community. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+name: "OpenIM CLA Assistant"
+on:
+  issue_comment:
+    types: [created]
+  pull_request_target:
+    types: [opened,closed,synchronize]
+
+# explicitly configure permissions, in case your GITHUB_TOKEN workflow permissions are set to read-only in repository settings
+permissions:
+  actions: write
+  contents: write
+  pull-requests: write
+  statuses: write
+
+env:
+  # Define Open-IM-Server variables here
+  OPEN_IM_SERVER_REMOTE_ORGANIZATION: openim-sigs
+  REMOTE_REPOSITORY: cla
+  OPEN_IM_SERVER_CLA_DOCUMENT: https://github.com/openim-sigs/cla/blob/main/README.md
+  OPEN_IM_SERVER_SIGNATURES_PATH: signatures/${{ github.event.repository.name }}/cla.json
+
+  OPEN_IM_SERVER_ALLOWLIST: kubbot,bot* 
+
+jobs:
+  CLAAssistant:
+    runs-on: ubuntu-latest
+    steps:
+      - name: "CLA Assistant"
+        if: (github.event.comment.body == 'recheck' || github.event.comment.body == 'I have read the CLA Document and I hereby sign the CLA') || github.event_name == 'pull_request_target'
+        uses: contributor-assistant/github-action@v2.3.0
+        env:
+          GITHUB_TOKEN: ${{ secrets.BOT_GITHUB_TOKEN }}
+          PERSONAL_ACCESS_TOKEN: ${{ secrets.REDBOT_GITHUB_TOKEN }}
+        with:
+          path-to-signatures: ${{ env.OPEN_IM_SERVER_SIGNATURES_PATH }}
+          path-to-document: ${{ env.OPEN_IM_SERVER_CLA_DOCUMENT }}
+          branch: 'main'
+          allowlist: ${{ env.OPEN_IM_SERVER_ALLOWLIST }}
+
+          remote-organization-name: ${{ env.OPEN_IM_SERVER_REMOTE_ORGANIZATION }}
+          remote-repository-name: ${{ env.REMOTE_REPOSITORY }}
+
+          create-file-commit-message: '📚 Docs: Creating file for storing ${{ github.event.repository.name }} CLA Signatures'
+          custom-notsigned-prcomment: '💕 Thank you for your contribution and please kindly read and sign our [🎯https://github.com/openim-sigs/cla/blob/main/README.md](https://github.com/openim-sigs/cla/blob/main/README.md). <br> If you wish to sign the CRA, **Please copy and comment on the following sentence:**'
+          custom-pr-sign-comment: 'I have read the CLA Document and I hereby sign the CLA'
+          custom-allsigned-prcomment: '🤖 All Contributors have signed the [${{ github.event.repository.name }} CLA](https://github.com/openim-sigs/cla/blob/main/README.md).<br> The signed information is recorded [🤖here](https://github.com/openim-sigs/cla/tree/main/signatures/${{ github.event.repository.name }}/cla.json)'
+        #   lock-pullrequest-aftermerge: false - if you don't want this bot to automatically lock the pull request after merging (default - true)
+        #   use-dco-flag: true - If you are using DCO instead of CLA

.github/workflows/codeql-analysis.yml

@@ -1,71 +1,76 @@
-# For most projects, this workflow file will not need changing; you simply need
-# to commit it to your repository.
+# Copyright © 2023 OpenIM open source community. All rights reserved.
 #
-# You may wish to alter this file to override the set of languages analyzed,
-# or to provide custom queries or build logic.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
 #
-# ******** NOTE ********
-# We have attempted to detect the languages in your repository. Please check
-# the `language` matrix defined below to confirm you have the correct set of
-# supported CodeQL languages.
+#     http://www.apache.org/licenses/LICENSE-2.0
 #
-name: "CodeQL"
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+
+name: "OpenIM Code Scanning - Action"
 
 on:
   push:
-    branches: [ main ]
+    branches: [main]
   pull_request:
-    # The branches below must be a subset of the branches above
-    branches: "*"
-#   schedule:
-#     - cron: '23 2 * * 2'
+    branches: [main]
+  schedule:
+    #        ┌───────────── minute (0 - 59)
+    #        │  ┌───────────── hour (0 - 23)
+    #        │  │ ┌───────────── day of the month (1 - 31)
+    #        │  │ │ ┌───────────── month (1 - 12 or JAN-DEC)
+    #        │  │ │ │ ┌───────────── day of the week (0 - 6 or SUN-SAT)
+    #        │  │ │ │ │
+    #        │  │ │ │ │
+    #        │  │ │ │ │
+    #        *  * * * *
+    - cron: '30 1 * * 0'
 
 jobs:
-  analyze:
-    name: Analyze
+  CodeQL-Build:
+    # CodeQL runs on ubuntu-latest, windows-latest, and macos-latest
     runs-on: ubuntu-latest
+
     permissions:
-      actions: read
-      contents: read
+      # required for all workflows
       security-events: write
 
-    strategy:
-      fail-fast: false
-      matrix:
-        language: [ 'go' ]
-        # CodeQL supports [ 'cpp', 'csharp', 'go', 'java', 'javascript', 'python' ]
-        # Learn more:
-        # https://docs.github.com/en/free-pro-team@latest/github/finding-security-vulnerabilities-and-errors-in-your-code/configuring-code-scanning#changing-the-languages-that-are-analyzed
+      # only required for workflows in private repositories
+      actions: write
+      contents: write
 
     steps:
-    - name: Checkout repository
-      uses: actions/checkout@v2
+      - name: Checkout repository
+        uses: actions/checkout@v3
 
-    # Initializes the CodeQL tools for scanning.
-    - name: Initialize CodeQL
-      uses: github/codeql-action/init@v1
-      with:
-        languages: ${{ matrix.language }}
-        # If you wish to specify custom queries, you can do so here or in a config file.
-        # By default, queries listed here will override any specified in a config file.
-        # Prefix the list here with "+" to use these queries and those in the config file.
-        # queries: ./path/to/local/query, your-org/your-repo/queries@main
+      # Initializes the CodeQL tools for scanning.
+      - name: Initialize CodeQL
+        uses: github/codeql-action/init@v2
+        # Override language selection by uncommenting this and choosing your languages
+        with:
+          languages: go
 
-    # Autobuild attempts to build any compiled languages  (C/C++, C#, or Java).
-    # If this step fails, then you should remove it and run the build manually (see below)
-    - name: Autobuild
-      uses: github/codeql-action/autobuild@v1
+      # Autobuild attempts to build any compiled languages (C/C++, C#, Go, or Java).
+      # If this step fails, then you should remove it and run the build manually (see below).
+      - name: Autobuild
+        uses: github/codeql-action/autobuild@v2
 
-    # ℹ️ Command-line programs to run using the OS shell.
-    # 📚 https://git.io/JvXDl
+      # ℹ️ Command-line programs to run using the OS shell.
+      # 📚 See https://docs.github.com/en/actions/using-workflows/workflow-syntax-for-github-actions#jobsjob_idstepsrun
 
-    # ✏️ If the Autobuild fails above, remove it and uncomment the following three lines
-    #    and modify them (or add more) to build your code if your project
-    #    uses a compiled language
+      # ✏️ If the Autobuild fails above, remove it and uncomment the following
+      #    three lines and modify them (or add more) to build your code if your
+      #    project uses a compiled language
 
-    #- run: |
-    #   make bootstrap
-    #   make release
+    #   - run: |
+    #       make bootstrap
+    #       make release
 
-    - name: Perform CodeQL Analysis
-      uses: github/codeql-action/analyze@v1
+      - name: Perform CodeQL Analysis
+        uses: github/codeql-action/analyze@v2

.github/workflows/create_branch_on_tag.yml

@@ -0,0 +1,62 @@
+name: Create Branch on Tag
+
+on:
+  push:
+    tags:
+      - 'v*.*.0'
+
+jobs:
+  create-branch:
+    runs-on: ubuntu-latest
+    steps:
+    - name: Check out code
+      uses: actions/checkout@v3
+      with:
+        fetch-depth: 0
+
+    - name: Set up Git
+      run: |
+        git config --global user.name 'kubbot'
+        git config --global user.email '3293172751yxy@gmail.com'
+
+    - name: Install git-chglog
+      run: make install.git-chglog
+
+    - name: Create Branch
+      run: |
+        TAG_NAME=${GITHUB_REF/refs\/tags\//}
+        IFS='.' read -ra VERSION_PARTS <<< "$TAG_NAME"
+        if [[ "${VERSION_PARTS[2]}" = "0" ]]; then
+          BRANCH_NAME="release-v${VERSION_PARTS[0]}.${VERSION_PARTS[1]}"
+          echo "Creating branch $BRANCH_NAME"
+          git checkout -b "$BRANCH_NAME"
+          git push origin "$BRANCH_NAME"
+        fi
+
+    - name: Push Changes
+      uses: stefanzweifel/git-auto-commit-action@v4
+      with:
+        commit_message: "Auto Commit CHANGELOG"
+        branch: release-v${VERSION_PARTS[0]}.${VERSION_PARTS[1]}
+      env:
+        GITHUB_TOKEN: ${{ secrets.BOT_GITHUB_TOKEN }}
+
+    - name: Create and Push CHANGELOG
+      run: |
+        git checkout main
+        TAG_NAME=${GITHUB_REF/refs\/tags\//}
+        IFS='.' read -ra VERSION_PARTS <<< "$TAG_NAME"
+        if [[ "${VERSION_PARTS[2]}" = "0" ]]; then
+          cd CHANGELOG
+          git-chglog --tag-filter-pattern "v${VERSION_PARTS[0]}.${VERSION_PARTS[1]}.*"  -o "CHANGELOG-${VERSION_PARTS[0]}.${VERSION_PARTS[1]}.md"
+          git add "CHANGELOG-${VERSION_PARTS[0]}.${VERSION_PARTS[1]}.md"
+          git commit -m "Update CHANGELOG for $TAG_NAME"
+        fi
+
+    - name: Push Changes
+      uses: stefanzweifel/git-auto-commit-action@v4
+      with:
+        commit_message: "Auto Commit CHANGELOG"
+        branch: main
+      env:
+        GITHUB_TOKEN: ${{ secrets.BOT_GITHUB_TOKEN }}

.github/workflows/deploy.yml

@@ -0,0 +1,73 @@
+# Copyright © 2023 OpenIM open source community. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+name: OpenIM Deploy for dev
+
+on:
+  push:
+    branches:
+      - 'devops' # Only for the dev branch
+      - 'main'
+    paths:
+      - '.github/workflows/*'
+      # - '__test__/**' # dev No immediate testing is required
+      - 'src/**'
+      - 'Dockerfile'
+      - 'docker-compose.yml'
+      - 'bin/*'
+
+jobs:
+  deploy-dev:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v3
+      - name: executing remote ssh commands using password
+        uses: appleboy/ssh-action@v1.0.0
+        env:
+            OWNER: ${{ github.repository_owner }}
+            REPO: ${{ github.event.repository.name }}
+        with:
+          host: "${{ secrets.SG_M1_HOST }}, ${{ secrets.SG_N1_HOST }}, ${{ secrets.SG_N2_HOST}}"
+          username: ${{ secrets.SG_USERNAME }}
+          password: ${{ secrets.SG_PASSWORD }}
+          port: ${{ secrets.SG_PORT }}
+          envs: OWNER,REPO
+          script_stop: true
+          script: |
+            mkdir -p /test/openim
+            cd /test/openim
+            pwd;ls -al
+            echo "OWNER: $OWNER"
+            echo "REPO: $REPO"
+            git clone -b develop https://github.com/${OWNER}/${REPO}.git; cd ${REPO}
+            docker compose up -d
+
+
+    #   - name: deploy # Deployment
+    #     run: |
+    #       ssh work@182.92.xxx.xxx "
+    #         # 【Attention】Log in with the 'work' account, manually create /home/work/imooc-lego directory
+    #         # Then git clone https://username:password@github.com/imooc-lego/biz-editor-server.git -b dev (private repository, use GitHub username and password)
+    #         # Remember to delete origin to avoid exposing GitHub password
+    #         cd /home/work/imooc-lego/biz-editor-server;
+    #         git remote add origin https://openimbot:${{secrets.WFP_PASSWORD}}@github.com/OpenIMSDK/open-im-server.git;
+    #         git checkout dev;
+    #         git pull origin dev; # Download the latest code again
+    #         git remote remove origin; # Remove origin to avoid exposing GitHub password
+    #         # Start docker
+    #         docker-compose build editor-server; # Same as the service name in docker-compose.yml
+    #         docker-compose up -d;
+    #       "
+    #   - name: delete ssh key # Delete ssh key
+    #     run: rm -rf ~/.ssh/id_rsa

.github/workflows/depsreview.yaml

@@ -0,0 +1,18 @@
+# Copyright © 2023 KubeCub open source community. All rights reserved.
+# Licensed under the MIT License (the "License");
+# you may not use this file except in compliance with the License.
+
+name: Dependency Review
+on: [pull_request]
+
+permissions:
+  contents: read
+
+jobs:
+  dependency-review:
+    runs-on: ubuntu-latest
+    steps:
+      - name: 'Checkout Repository'
+        uses: actions/checkout@v3
+      - name: 'Dependency Review'
+        uses: actions/dependency-review-action@v3

.github/workflows/e2e-test.yml

@@ -0,0 +1,16 @@
+# Copyright © 2023 OpenIM. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# name: OpenIM e2e Test
+

.github/workflows/golangci-lint.yml

@@ -0,0 +1,51 @@
+# Copyright © 2023 OpenIM open source community. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+
+name: OpenIM golangci-lint
+on:
+  push:
+    branches: [main]
+  pull_request:
+    branches: [main]
+jobs:
+    golangci:
+      name: lint
+      runs-on: ubuntu-latest
+      steps:
+        - uses: actions/checkout@v3
+        - uses: actions/setup-go@v4
+          with:
+            go-version: '1.20'
+            cache: false
+        - name: golangci-lint
+          uses: golangci/golangci-lint-action@v3
+          with:
+            # Require: version of golangci-lint to use in form of v1.2 or v1.2.3 or `latest` to use the latest version
+            version: v1.53
+
+            # Optional: working directory, useful for monorepos
+            working-directory: server
+
+            # Optional: golangci-lint command line arguments.
+            # 
+            # Note: by default the `.golangci.yml` file should be at the root of the repository.
+            # The location of the configuration file can be changed by using `--config=`
+            # args: --timeout=30m --config=/my/path/.golangci.yml --issues-exit-code=0
+
+            # Optional: show only new issues if it's a pull request. The default value is `false`.
+            # only-new-issues: true
+
+            # Optional:The mode to install golangci-lint. It can be 'binary' or 'goinstall'.
+            install-mode: "goinstall"

.github/workflows/gosec.yml

@@ -1,30 +1,45 @@
-# name: Run gosec
+# Copyright © 2023 OpenIM. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
 
-# # gosec is a source code security audit tool for the Go language. It performs a static 
-# # analysis of the Go code, looking for potential security problems. The main functions of gosec are:
-# #     1. Find common security vulnerabilities, such as SQL injection, command injection, and cross-site scripting (XSS).
-# #     2. Audit codes according to common security standards and find non-standard codes.
-# #     3. Assist the Go language engineer to write safe and reliable code.
+name: OpenIM Run Gosec
 
-# on:
-#   push:
-#     branches: "*"
-#   pull_request:
-#     branches: "*"
-#     paths-ignore:
-#       - '*.md'
-#       - '*.yml'
-#       - '.github'
+# gosec is a source code security audit tool for the Go language. It performs a static 
+# analysis of the Go code, looking for potential security problems. The main functions of gosec are:
+#     1. Find common security vulnerabilities, such as SQL injection, command injection, and cross-site scripting (XSS).
+#     2. Audit codes according to common security standards and find non-standard codes.
+#     3. Assist the Go language engineer to write safe and reliable code.
+# https://github.com/securego/gosec/
+on:
+  push:
+    branches: "*"
+  pull_request:
+    branches: "*"
+    paths-ignore:
+      - '*.md'
+      - '*.yml'
+      - '.github'
 
-# jobs:
-#   golang-security-action:
-#     runs-on: ubuntu-latest
-#     env:
-#       GO111MODULE: on
-#     steps:
-#       - name: Check out code
-#         uses: actions/checkout@v3
-#       - name: Run Gosec Security Scanner
-#         uses: securego/gosec@master
-#         with:
-#           args: ./...
+jobs:
+  golang-security-action:
+    runs-on: ubuntu-latest
+    env:
+      GO111MODULE: on
+    steps:
+      - name: Check out code
+        uses: actions/checkout@v3
+      - name: Run Gosec Security Scanner
+        uses: securego/gosec@master
+        with:
+          args: ./...
+        continue-on-error: true

.github/workflows/help-comment-issue.yml

@@ -1,3 +1,17 @@
+# Copyright © 2023 OpenIM. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
 name: Good frist issue add comment
 on:
   issues:
@@ -18,4 +32,4 @@ jobs:
           body: |
             This issue is available for anyone to work on. **Make sure to reference this issue in your pull request.** :sparkles: Thank you for your contribution! :sparkles:
             [Join slack 🤖](https://join.slack.com/t/openimsdk/shared_invite/zt-1tmoj26uf-_FDy3dowVHBiGvLk9e5Xkg) to connect and communicate with our developers.
-            If you wish to accept this assignment, please leave a comment in the comments section: `/accept`.🎯
+            If you wish to accept this assignment, please leave a comment in the comments section: `/accept`.🎯

.github/workflows/image.yml

@@ -0,0 +1,95 @@
+# Copyright © 2023 OpenIM open source community. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+name: Build Image
+
+on:
+  push:
+    branches:
+      - main
+    paths:
+      - "**.go"
+      - "!**_test.go"
+      - "build/**"
+    tags:
+      - v*
+
+jobs:
+  release:
+    strategy:
+      matrix:
+        components: [core, swagger]
+    runs-on: ubuntu-20.04
+    steps:
+      - uses: actions/checkout@v3
+        with:
+          fetch-depth: 20
+      - uses: dorny/paths-filter@v2
+        if: ${{ !startsWith(github.ref_name, 'v') }}
+        id: changes
+        with:
+          filters: |
+            go:
+              - '**.go'
+              - 'build/core/Dockerfile'
+            api:
+              - 'openapi/**'
+              - 'build/swagger/build.sh'
+              - 'build/swagger/Dockerfile'
+      - name: Docker meta
+        id: meta
+        uses: docker/metadata-action@v4
+        with:
+          flavor: |
+            latest=false
+          images: |
+            ${{ secrets.DOCKERHUB_USERNAME }}/openimsdk-${{ matrix.components }}
+            registry.cn-hangzhou.aliyuncs.com/${{ secrets.ALIREGISTRY_NAMESPACE }}/openimsdk-${{ matrix.components }}
+          tags: |
+            type=ref,event=branch
+            type=sha,prefix={{branch}}-,enable=${{ github.ref_type == 'branch' }}
+            type=ref,event=tag
+      - name: Login to Docker Hub
+        uses: docker/login-action@v2
+        with:
+          username: ${{ secrets.DOCKERHUB_USERNAME }}
+          password: ${{ secrets.DOCKERHUB_TOKEN }}
+
+      - name: Login to Ali Container Registry
+        uses: docker/login-action@v2
+        with:
+          registry: registry.cn-hangzhou.aliyuncs.com
+          username: ${{ secrets.ALIREGISTRY_USERNAME }}
+          password: ${{ secrets.ALIREGISTRY_TOKEN }}
+
+      - name: Condition
+        id: condition
+        run: |
+          echo "run=${{ startsWith(github.ref_name, 'v') || ((steps.changes.outputs.go == 'true' && (matrix.components == 'core' || matrix.components == 'job')) || (steps.changes.outputs.api == 'true' && matrix.components == 'swagger')) }}" >> $GITHUB_OUTPUT
+
+      - name: Set up QEMU
+        if: ${{ steps.condition.outputs.run == 'true' }}
+        uses: docker/setup-qemu-action@v2
+      - name: Set up Docker Buildx
+        if: ${{ steps.condition.outputs.run == 'true' }}
+        uses: docker/setup-buildx-action@v2
+      - name: Build and push
+        if: ${{ steps.condition.outputs.run == 'true' }}
+        uses: docker/build-push-action@v3
+        with:
+          context: .
+          file: ./build/${{ matrix.components }}/Dockerfile
+          platforms: linux/amd64
+          push: true
+          tags: ${{ steps.meta.outputs.tags }}

.github/workflows/issue-robot.yml

@@ -1,3 +1,17 @@
+# Copyright © 2023 OpenIM open source community. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
 name: 'issue translator'
 on:
   issue_comment:

.github/workflows/link-pr.yml

@@ -1,3 +1,17 @@
+# Copyright © 2023 OpenIM open source community. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
 name: Github Rebot for Link check error
 
 # Every Monday at 12:30 p.m

.github/workflows/lock-issue.yml

@@ -0,0 +1,65 @@
+# Copyright © 2023 OpenIM open source community. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+name: 'Lock Threads'
+
+on:
+  schedule:
+    - cron: '0 * * * *'
+  workflow_dispatch:
+
+permissions:
+  issues: write
+  pull-requests: write
+
+concurrency:
+  group: lock
+
+jobs:
+  action:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: dessant/lock-threads@v4
+        with:
+          github-token: ${{ secrets.BOT_GITHUB_TOKEN }}
+          issue-inactive-days: '365'
+          exclude-issue-created-before: ''
+          exclude-issue-created-after: ''
+          exclude-issue-created-between: ''
+          exclude-issue-closed-before: ''
+          exclude-issue-closed-after: ''
+          exclude-issue-closed-between: ''
+          include-any-issue-labels: ''
+          include-all-issue-labels: ''
+          exclude-any-issue-labels: ''
+          add-issue-labels: ''
+          remove-issue-labels: ''
+          issue-comment: ''
+          issue-lock-reason: 'resolved'
+          pr-inactive-days: '365'
+          exclude-pr-created-before: ''
+          exclude-pr-created-after: ''
+          exclude-pr-created-between: ''
+          exclude-pr-closed-before: ''
+          exclude-pr-closed-after: ''
+          exclude-pr-closed-between: ''
+          include-any-pr-labels: ''
+          include-all-pr-labels: ''
+          exclude-any-pr-labels: ''
+          add-pr-labels: ''
+          remove-pr-labels: ''
+          pr-comment: ''
+          pr-lock-reason: 'resolved'
+          process-only: ''
+          log-output: false

.github/workflows/opencommit.yml

@@ -1,4 +1,18 @@
-name: 'OpenCommit Action'
+# Copyright © 2023 OpenIM. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+name: 'OpenIM Commit Action'
 
 on:
   push:

.github/workflows/openimci.yml

@@ -0,0 +1,184 @@
+# Copyright © 2023 OpenIM open source community. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+name: OpenIM CI Aotu Build and Install
+
+on: 
+  push:
+    branches:
+        - main
+    paths-ignore:
+        - "docs/**"
+        - "README.md"
+        - "README_zh-CN.md"
+        - "CONTRIBUTING.md"
+  pull_request:
+    branches:
+        - main
+    paths-ignore:
+        - "README.md"
+        - "README_zh-CN.md"
+        - "CONTRIBUTING.md"
+        - "docs/**"
+
+env:
+  GO_VERSION: "1.19"
+  GOLANGCI_VERSION: "v1.50.1"
+
+jobs:
+  openim:
+    name: Test with go ${{ matrix.go_version }} on ${{ matrix.os }}
+    runs-on: ${{ matrix.os }}
+    permissions:
+        # Give the default GITHUB_TOKEN write permission to commit and push the changed files back to the repository.
+        contents: write
+    environment:
+      name: openim
+
+    strategy:
+      matrix:
+        go_version: ["1.18","1.19","1.20"]
+        os: [ubuntu-latest]
+
+    steps:
+      - name: Set up Go ${{ matrix.go_version }}
+        uses: actions/setup-go@v2
+        with:
+          go-version: ${{ matrix.go_version }}
+        id: go
+
+      - name: Check out code into the Go module directory
+        uses: actions/checkout@v3
+
+      - name: Install Task
+        uses: arduino/setup-task@v1
+        with:
+          version: 2.x
+
+      - name: Run go modules tidy
+        run: |
+          sudo make tidy
+          sudo make tools.verify.go-gitlint
+          echo "Run go modules tidy successfully" 
+
+      - name: Run go format
+        run: |
+          sudo make format
+          echo "Run go format successfully" 
+        continue-on-error: true
+
+      - name: Generate all necessary files, such as error code files
+        run: |
+          make generate
+          echo "Generate all necessary files successfully" 
+        continue-on-error: true
+
+      - name: Run unit test and get test coverage
+        run: |
+          make cover
+          echo "Run unit test and get test coverage successfully" 
+        continue-on-error: true
+
+      - name: Initialize CodeQL
+        uses: github/codeql-action/init@v2
+        with:
+          languages: go
+
+      - name: Build source code for host platform
+        run: |
+          sudo make build
+          echo "Build source code for host platform successfully" 
+
+      - name: Perform CodeQL Analysis
+        uses: github/codeql-action/analyze@v2
+
+      - name: OpenIM verify copyright
+        run: |
+          sudo make verify-copyright
+          sudo make add-copyright
+          echo "OpenIM verify successfully" 
+        continue-on-error: true
+
+      - name: Clean all build
+        run: |
+          sudo make clean
+          echo "Clean all build successfully" 
+
+      - name: push OpenIM 
+        uses: stefanzweifel/git-auto-commit-action@v4
+        with:
+          commit_message: "cicd: robot automated Change"
+        #   commit_options: '--no-verify --signoff'
+          branch: main
+        #   create_branch: true
+        #   # Optional commit user and author settings
+        #   commit_user_name: kubbot # defaults to "github-actions[bot]"
+        #   commit_user_email: 3293172751ysy@gmail.com # defaults to "41898282+github-actions[bot]@users.noreply.github.com"
+        #   commit_author: Kubbot # defaults to author of the commit that triggered the run
+        continue-on-error: true
+
+      - name: Commit Changes
+        uses: stefanzweifel/git-auto-commit-action@v4
+        with:
+          commit_message: "chore(fmt): robot automated format and lint Change"
+          commit_options: '--no-verify --signoff'
+          branch: main
+        continue-on-error: true
+
+      - name: Set Current Directory
+        id: set_directory
+        run: |
+          echo "::set-output name=directory::$(pwd)"
+        continue-on-error: true
+
+      - name: Collect Test Coverage File
+        id: collect_coverage
+        run: |
+          cd ${{ steps.set_directory.outputs.directory }}
+          make cover
+          echo "::set-output name=coverage_file::./_output/tmp/coverage.out"
+        continue-on-error: true
+
+      - name: Display Test Coverage
+        run: |
+          echo "Test Coverage:"
+          cat ${{ steps.collect_coverage.outputs.coverage_file }}
+        continue-on-error: true
+
+      - name: Set up Docker Buildx
+        uses: docker/setup-buildx-action@v1
+        continue-on-error: true
+
+  openim-start:
+    name: Teat OpenIM make install start on ${{ matrix.os }}
+    runs-on: ${{ matrix.os }}
+    environment:
+      name: openim
+    strategy:
+      matrix:
+        go_version: ["1.20"]
+        os: ["ubuntu-latest"]
+    steps:
+      - name: Set up Go ${{ matrix.go_version }}
+        uses: actions/setup-go@v2
+        with:
+          go-version: ${{ matrix.go_version }}
+        id: go
+
+      - name: Check out code into the Go module directory
+        uses: actions/checkout@v2
+
+      - name: Run OpenIM make install start
+        run: |
+          sudo make install

.github/workflows/project-progress.yml

@@ -1,3 +1,17 @@
+# Copyright © 2023 OpenIM open source community. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
 # GitHub recommends pinning actions to a commit SHA.
 # To get a newer version, you will need to update the SHA.
 # You can also reference a tag or branch, but the action may change without warning.
@@ -17,6 +31,6 @@ jobs:
     steps:
       - uses: alex-page/github-project-automation-plus@v0.8.3
         with:
-          project: OpenIM 2023 Sprint 🔥
+          project: OpenIM-V3.1
           column: In Progress
-          repo-token: ${{ secrets.BOT_GITHUB_TOKEN }}
+          repo-token: ${{ secrets.GITHUB_TOKEN }}

.github/workflows/pull-request.yml

@@ -0,0 +1,114 @@
+# Copyright © 2023 OpenIM. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+name: Github Pull Request
+on:
+  push:
+    branches: [main]
+    paths-ignore:
+      - 'README.md'
+      - 'CONTRIBUTING.md'
+      - 'docs/**'
+  pull_request:
+    branches: [main]
+    paths-ignore:
+      - 'README.md'
+      - 'CONTRIBUTING.md'
+      - 'docs/**'
+
+permissions:
+  pull-requests: write
+  contents: write
+
+jobs:
+  build:
+    runs-on: ubuntu-latest
+    steps:
+      - name: checkout
+        uses: actions/checkout@v3
+        with:
+          fetch-depth: 0
+
+      - name: Get League branch Patch
+        run: |
+          git config user.name 'openimbot'
+          git config user.email 'openimsdk@qq.com'
+          git checkout -b cicd/patch-${{ github.event.number }}
+      - uses: actions/setup-node@v3
+      - name: Setup Go
+        uses: actions/setup-go@v2
+      - name: Run go modules tidy
+        run: |
+          sudo make tidy
+          sudo make tools.verify.go-gitlint
+          echo "Run go modules tidy successfully" 
+
+      - name: Run go format
+        run: |
+          sudo make format
+          echo "Run go format successfully" 
+        continue-on-error: true
+
+      - name: Generate all necessary files, such as error code files
+        run: |
+          make generate
+          echo "Generate all necessary files successfully" 
+        continue-on-error: true
+
+      - name: Run unit test and get test coverage
+        run: |
+          make cover
+          echo "Run unit test and get test coverage successfully" 
+        continue-on-error: true
+
+      - name: Initialize CodeQL
+        uses: github/codeql-action/init@v2
+        with:
+          languages: go
+
+      - name: Build source code for host platform
+        run: |
+          sudo make build
+          echo "Build source code for host platform successfully" 
+
+      - name: Perform CodeQL Analysis
+        uses: github/codeql-action/analyze@v2
+
+      - name: OpenIM verify copyright
+        run: |
+          sudo make verify-copyright
+          sudo make add-copyright
+          echo "OpenIM verify successfully" 
+        continue-on-error: true
+      
+      - name: Commit code
+        run: |
+            git add .
+    
+      - name: Create Pull Request
+        uses: peter-evans/create-pull-request@v5
+        with:
+          commit-message: "cicd: bump League Patch to cicd/patch-${{ github.event.number }}"
+          title: Bump League Patch to cicd/patch-${{ github.event.number }}
+          body: |
+            Review criteria:
+            
+            - [ ] Disenchanter can connect and issue actions
+            
+            This is an automated PR.
+            <sub>[workflow](https://github.com/OpenIMSDK/Open-IM-Server/blob/main/.github/workflows/pull-request.yml).</sub>
+          base: main
+          branch: cicd/patch-${{ github.event.number }}
+          labels: kind/documentation, area/test, ok-to-test
+          token: ${{ secrets.REDBOT_GITHUB_TOKEN }}

.github/workflows/release.yml

@@ -0,0 +1,78 @@
+# Copyright © 2023 OpenIM. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+name: OpenIM Server Release
+
+on:
+  push:
+    # run only against tags
+    tags:
+      - '*'
+
+permissions:
+  contents: write
+  packages: write
+  issues: write
+
+jobs:
+  goreleaser:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v3
+        with:
+          fetch-depth: 0
+      - run: git fetch --force --tags
+      - uses: actions/setup-go@v4
+        with:
+          go-version: stable
+      # More assembly might be required: Docker logins, GPG, etc. It all depends
+      # on your needs.
+      - uses: goreleaser/goreleaser-action@v4
+        with:
+          # either 'goreleaser' (default) or 'goreleaser-pro':
+          distribution: goreleaser
+          version: latest
+          args: release --clean
+        env:
+          GITHUB_TOKEN: ${{ secrets.BOT_GITHUB_TOKEN }}
+          # Your GoReleaser Pro key, if you are using the 'goreleaser-pro'
+          # distribution:
+          # GORELEASER_KEY: ${{ secrets.GORELEASER_KEY }}
+
+  goreleaser-check-pkgs:
+    runs-on: ubuntu-latest
+    env:
+      DOCKER_CLI_EXPERIMENTAL: "enabled"
+    needs: [ goreleaser ]
+    if: github.ref == 'refs/heads/main'
+    strategy:
+      matrix:
+        format: [ deb, rpm, apk ]
+    steps:
+      - uses: actions/checkout@c85c95e3d7251135ab7dc9ce3241c5835cc595a9 # v3
+        with:
+          fetch-depth: 0
+      - uses: arduino/setup-task@e26d8975574116b0097a1161e0fe16ba75d84c1c # v1
+        with:
+          version: 3.x
+          repo-token: ${{ secrets.GITHUB_TOKEN }}
+      - uses: docker/setup-qemu-action@2b82ce82d56a2a04d2637cd93a637ae1b359c0a7 # v2
+      - uses: actions/cache@88522ab9f39a2ea568f7027eddc7d8d8bc9d59c8 # v3
+        with:
+          path: |
+            ./_output/dist/*.deb
+            ./_output/dist/*.rpm
+            ./_output/dist/*.apk
+          key: ${{ github.ref }}
+      - run: task goreleaser:test:${{ matrix.format }}

.github/workflows/scripts-test.yml

@@ -0,0 +1,86 @@
+# Copyright © 2023 OpenIM. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+name: OpenIM Start Execute Scripts
+
+on: 
+    push:
+      branches:
+          - main
+      paths-ignore:
+          - "docs/**"
+          - "README.md"
+          - "README_zh-CN.md"
+          - "CONTRIBUTING.md"
+    pull_request:
+      branches:
+          - main
+      paths-ignore:
+          - "README.md"
+          - "README_zh-CN.md"
+          - "CONTRIBUTING.md"
+          - "docs/**"
+
+jobs:
+  execute-scripts:
+    runs-on: ubuntu-latest
+
+    steps:
+    - name: Checkout code
+      uses: actions/checkout@v2
+
+    - name: Start Docker Compose
+      run: |
+        sudo docker compose stop
+        sudo sleep 30
+        sudo docker compose up -d
+        sudo sleep 60
+      continue-on-error: true
+
+    - name: Stop all services
+      run: |
+        sudo chmod +x ./scripts/stop_all.sh
+        sudo ./scripts/stop_all.sh
+        sudo cat logs/openIM.log 2>/dev/null
+      shell: bash
+      continue-on-error: true
+
+    - name: Build all services
+      run: |
+        sudo chmod +x ./scripts/build_all_service.sh
+        sudo ./scripts/build_all_service.sh
+        sudo cat logs/openIM.log 2>/dev/null
+      shell: bash
+
+    - name: Start all services
+      run: |
+        sudo chmod +x ./scripts/start_all.sh
+        sudo ./scripts/start_all.sh
+        sudo cat logs/openIM.log 2>/dev/null
+      continue-on-error: true
+      shell: bash
+
+    - name: Check all services
+      run: |
+        sudo chmod +x ./scripts/check_all.sh
+        sudo ./scripts/check_all.sh
+        sudo cat logs/openIM.log 2>/dev/null
+      shell: bash
+
+    - name: Print openIM.log
+      run: |
+        sudo cat logs/* 2>/dev/null
+        sudo cat logs/* 2>/dev/null >> "$GITHUB_OUTPUT"
+      shell: bash
+      continue-on-error: true

.github/workflows/stale.yml

@@ -1,3 +1,17 @@
+# Copyright © 2023 OpenIM. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
 # This workflow warns and then closes issues and PRs that have had no activity for a specified amount of time.
 #
 # You can adjust the behavior by modifying this file.

.github/workflows/sync.yml

@@ -8,9 +8,6 @@ on:
     push:
         branches:
           - main
-    pull_request:
-        branches:
-          - main
     workflow_dispatch:
 
 jobs:
@@ -25,7 +22,6 @@ jobs:
         with:
           GH_INSTALLATION_TOKEN: "${{ secrets.BOT_GITHUB_TOKEN }}"
           CONFIG_PATH: .github/sync.yml
-          GH_PAT: "${{ secrets.BOT_GITHUB_TOKEN }}"
           ORIGINAL_MESSAGE: true
           SKIP_PR: true
           COMMIT_EACH_FILE: false

.gitignore

@@ -22,6 +22,7 @@ logs
 .devcontainer
 components
 out-test
+Dockerfile.cross
 
 ### Makefile ###
 tmp/
@@ -30,17 +31,17 @@ output/
 _output/
 
 ### OpenIM deploy ###
-deploy/open_im_demo
-deploy/open_im_api
-deploy/open_im_msg_gateway
-deploy/open_im_msg_transfer
-deploy/open_im_push
-deploy/open_im_timer_task
-deploy/open_im_rpc_user
-deploy/open_im_rpc_friend
-deploy/open_im_rpc_group
-deploy/open_im_rpc_msg
-deploy/open_im_rpc_auth
+deploy/openim_demo
+deploy/openim-api
+deploy/openim-rpc-msg_gateway
+deploy/openim-msgtransfer
+deploy/openim-push
+deploy/openim_timer_task
+deploy/openim-rpc-user
+deploy/openim-rpc-friend
+deploy/openim-rpc-group
+deploy/openim-rpc-msg
+deploy/openim-rpc-auth
 deploy/Open-IM-SDK-Core
 
 # files used by the developer
@@ -162,6 +163,7 @@ go.work
 # Reference: https://intellij-support.jetbrains.com/hc/en-us/articles/206544839
 
 # User-specific stuff
+.idea/
 .idea/**/workspace.xml
 .idea/**/tasks.xml
 .idea/**/usage.statistics.xml
@@ -351,7 +353,6 @@ cscope.po.out
 *testsdir
 *testsfile
 *testsfiles
-*test
 *testdir
 *testfile
 *testfiles
@@ -389,3 +390,5 @@ Sessionx.vim
 [._]*.un~
 
 # End of https://www.toptal.com/developers/gitignore/api/go,git,vim,tags,test,emacs,backup,jetbrains
+.idea
+dist/

.gitmodules

@@ -1,4 +0,0 @@
-
-[submodule "cmd/Open-IM-SDK-Core"]
-	path = cmd/Open-IM-SDK-Core
-	url = https://github.com/OpenIMSDK/Open-IM-SDK-Core.git

.golangci.yml

@@ -1,10 +1,27 @@
+# Copyright © 2023 OpenIMSDK open source community. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# This file contains all available configuration options
+# with their default values.
+
 # options for analysis running
 run:
   # default concurrency is a available CPU number
   concurrency: 4
 
   # timeout for analysis, e.g. 30s, 5m, default is 1m
-  timeout: 1m
+  timeout: 5m
 
   # exit code when at least one issue was found, default is 1
   issues-exit-code: 1
@@ -12,10 +29,37 @@ run:
   # include test files or not, default is true
   tests: true
 
+  # list of build tags, all linters use it. Default is empty list.
+  build-tags:
+    - mytag
+
+  # which dirs to skip: issues from them won't be reported;
+  # can use regexp here: generated.*, regexp is applied on full path;
+  # default value is empty list, but default dirs are skipped independently
+  # from this option's value (see skip-dirs-use-default).
+  # "/" will be replaced by current OS file path separator to properly work
+  # on Windows.
+  skip-dirs:
+    - util
+    - .*~
+    - api/swagger/docs
+    - server/docs
+
   # default is true. Enables skipping of directories:
   #   vendor$, third_party$, testdata$, examples$, Godeps$, builtin$
   skip-dirs-use-default: true
 
+  # which files to skip: they will be analyzed, but issues from them
+  # won't be reported. Default value is empty list, but there is
+  # no need to include all autogenerated files, we confidently recognize
+  # autogenerated files. If it's not please let us know.
+  # "/" will be replaced by current OS file path separator to properly work
+  # on Windows.
+  skip-files:
+    - ".*\\.my\\.go$"
+    - _test.go
+    - ".*\\.pb\\.go"
+
   # by default isn't set. If set we pass it to "go list -mod={option}". From "go help modules":
   # If invoked with -mod=readonly, the go command is disallowed from the implicit
   # automatic updating of go.mod described above. Instead, it fails when any changes
@@ -30,6 +74,7 @@ run:
   # If false (default) - golangci-lint acquires file lock on start.
   allow-parallel-runners: true
 
+
 # output configuration options
 output:
   # colored-line-number|line-number|json|tab|checkstyle|code-climate, default is "colored-line-number"
@@ -44,9 +89,26 @@ output:
   # make issues output unique by line, default is true
   uniq-by-line: true
 
+  # add a prefix to the output file references; default is no prefix
+  path-prefix: ""
+
+  # sorts results by: filepath, line and column
+  sort-results: true
 
 # all available settings of specific linters
 linters-settings:
+  bidichk:
+    # The following configurations check for all mentioned invisible unicode
+    # runes. It can be omitted because all runes are enabled by default.
+    left-to-right-embedding: true
+    right-to-left-embedding: true
+    pop-directional-formatting: true
+    left-to-right-override: true
+    right-to-left-override: true
+    left-to-right-isolate: true
+    right-to-left-isolate: true
+    first-strong-isolate: true
+    pop-directional-isolate: true
   dogsled:
     # checks assignments with too many blank identifiers; default is 2
     max-blank-identifiers: 2
@@ -62,47 +124,217 @@ linters-settings:
     # default is false: such cases aren't reported by default.
     check-blank: false
 
+    # [deprecated] comma-separated list of pairs of the form pkg:regex
+    # the regex is used to ignore names within pkg. (default "fmt:.*").
+    # see https://github.com/kisielk/errcheck#the-deprecated-method for details
+    #ignore: GenMarkdownTree,os:.*,BindPFlags,WriteTo,Help
+    #ignore: (os\.)?std(out|err)\..*|.*Close|.*Flush|os\.Remove(All)?|.*print(f|ln)?|os\.(Un)?Setenv
+
     # path to a file containing a list of functions to exclude from checking
     # see https://github.com/kisielk/errcheck#excluding-functions for details
     #exclude: errcheck.txt
+    
+  errorlint:
+    # Check whether fmt.Errorf uses the %w verb for formatting errors. See the readme for caveats
+    errorf: true
+    # Check for plain type assertions and type switches
+    asserts: true
+    # Check for plain error comparisons
+    comparison: true
+
   exhaustive:
+    # check switch statements in generated files also
+    check-generated: false
     # indicates that switch statements are to be considered exhaustive if a
     # 'default' case is present, even if all enum members aren't listed in the
     # switch
     default-signifies-exhaustive: false
+    # enum members matching the supplied regex do not have to be listed in
+    # switch statements to satisfy exhaustiveness
+    ignore-enum-members: ""
+    # consider enums only in package scopes, not in inner scopes
+    package-scope-only: false
+  exhaustivestruct:
+    struct-patterns:
+      - '*.Test'
+      - '*.Test2'
+      - '*.Embedded'
+      - '*.External'
+
+  # forbidigo:
+  #   # Forbid the following identifiers (identifiers are written using regexp):
+  #   forbid:
+  #     - ^print.*$
+  #     - 'fmt\.Print.*'
+  #     - fmt.Println.* # too much log noise
+  #     - ginkgo\\.F.* # these are used just for local development
+  #   # Exclude godoc examples from forbidigo checks.  Default is true.
+  #   exclude_godoc_examples: false
   funlen:
     lines: 150
-    statements: 40
+    statements: 50
+  gci:
+    # put imports beginning with prefix after 3rd-party packages;
+    # only support one prefix
+    # if not set, use goimports.local-prefixes
+    prefix: github.com/OpenIMSDK/OpenKF
   gocognit:
     # minimal code complexity to report, 30 by default (but we recommend 10-20)
     min-complexity: 30
-  nestif:
-    # minimal complexity of if statements to report, 5 by default
-    min-complexity: 4
   goconst:
     # minimal length of string constant, 3 by default
-    min-len: 5
+    min-len: 3
     # minimal occurrences count to trigger, 3 by default
-    min-occurrences: 5
+    min-occurrences: 3
+    # ignore test files, false by default
+    ignore-tests: false
+    # look for existing constants matching the values, true by default
+    match-constant: true
+    # search also for duplicated numbers, false by default
+    numbers: false
+    # minimum value, only works with goconst.numbers, 3 by default
+    min: 3
+    # maximum value, only works with goconst.numbers, 3 by default
+    max: 3
+    # ignore when constant is not used as function argument, true by default
+    ignore-calls: true
+
+  gocritic:
+    # Which checks should be enabled; can't be combined with 'disabled-checks';
+    # See https://go-critic.github.io/overview#checks-overview
+    # To check which checks are enabled run `GL_DEBUG=gocritic golangci-lint run`
+    # By default list of stable checks is used.
+    enabled-checks:
+      #- rangeValCopy
+      - nestingreduce
+      - truncatecmp
+      - unnamedresult
+      - ruleguard
+
+    # Which checks should be disabled; can't be combined with 'enabled-checks'; default is empty
+    disabled-checks:
+      - regexpMust
+      - ifElseChain
+      #- exitAfterDefer
+
+    # Enable multiple checks by tags, run `GL_DEBUG=gocritic golangci-lint run` to see all tags and checks.
+    # Empty list by default. See https://github.com/go-critic/go-critic#usage -> section "Tags".
+    enabled-tags:
+      - performance
+    disabled-tags:
+      - experimental
+
+    # Settings passed to gocritic.
+    # The settings key is the name of a supported gocritic checker.
+    # The list of supported checkers can be find in https://go-critic.github.io/overview.
+    settings:
+      captLocal: # must be valid enabled check name
+        # whether to restrict checker to params only (default true)
+        paramsOnly: true
+      elseif:
+        # whether to skip balanced if-else pairs (default true)
+        skipBalanced: true
+      hugeParam:
+        # size in bytes that makes the warning trigger (default 80)
+        sizeThreshold: 80
+      nestingReduce:
+        # min number of statements inside a branch to trigger a warning (default 5)
+        bodyWidth: 5
+      rangeExprCopy:
+        # size in bytes that makes the warning trigger (default 512)
+        sizeThreshold: 512
+        # whether to check test functions (default true)
+        skipTestFuncs: true
+      rangeValCopy:
+        # size in bytes that makes the warning trigger (default 128)
+        sizeThreshold: 32
+        # whether to check test functions (default true)
+        skipTestFuncs: true
+      ruleguard:
+        # path to a gorules file for the ruleguard checker
+        rules: ''
+      truncateCmp:
+        # whether to skip int/uint/uintptr types (default true)
+        skipArchDependent: true
+      underef:
+        # whether to skip (*x).method() calls where x is a pointer receiver (default true)
+        skipRecvDeref: true
+      unnamedResult:
+        # whether to check exported functions
+        checkExported: true
   gocyclo:
     # minimal code complexity to report, 30 by default (but we recommend 10-20)
     min-complexity: 30
+  cyclop:
+    # the maximal code complexity to report
+    max-complexity: 50
+    # the maximal average package complexity. If it's higher than 0.0 (float) the check is enabled (default 0.0)
+    package-average: 0.0
+    # should ignore tests (default false)
+    skip-tests: false
   godot:
-    # check all top-level comments, not only declarations
-    check-all: false
+    # comments to be checked: `declarations`, `toplevel`, or `all`
+    scope: declarations
+    # list of regexps for excluding particular comment lines from check
+    exclude:
+      # example: exclude comments which contain numbers
+      # - '[0-9]+'
+    # check that each sentence starts with a capital letter
+    capital: false
   godox:
     # report any comments starting with keywords, this is useful for TODO or FIXME comments that
     # might be left in the code accidentally and should be resolved before merging
     keywords: # default keywords are TODO, BUG, and FIXME, these can be overwritten by this setting
+      #- TODO
+      - BUG
+      - FIXME
+      #- NOTE
       - OPTIMIZE # marks code that should be optimized before merging
       - HACK # marks hack-arounds that should be removed before merging
   gofmt:
     # simplify code: gofmt with `-s` option, true by default
     simplify: true
+
+  gofumpt:
+    # Select the Go version to target. The default is `1.18`.
+    lang-version: "1.20"
+
+    # Choose whether or not to use the extra rules that are disabled
+    # by default
+    extra-rules: false
+
+  goheader:
+    values:
+      const:
+        # define here const type values in format k:v, for example:
+        # COMPANY: MY COMPANY
+      regexp:
+        # define here regexp type values, for example
+        # AUTHOR: .*@mycompany\.com
+    template: # |-
+      # put here copyright header template for source code files, for example:
+      # Note: {{ YEAR }} is a builtin value that returns the year relative to the current machine time.
+      #
+      # {{ AUTHOR }} {{ COMPANY }} {{ YEAR }}
+      # SPDX-License-Identifier: Apache-2.0
+
+      # Licensed under the Apache License, Version 2.0 (the "License");
+      # you may not use this file except in compliance with the License.
+      # You may obtain a copy of the License at:
+
+      #   http://www.apache.org/licenses/LICENSE-2.0
+
+      # Unless required by applicable law or agreed to in writing, software
+      # distributed under the License is distributed on an "AS IS" BASIS,
+      # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+      # See the License for the specific language governing permissions and
+      # limitations under the License.
+    template-path:
+      # also as alternative of directive 'template' you may put the path to file with the template source
   goimports:
     # put imports beginning with prefix after 3rd-party packages;
     # it's a comma-separated list of prefixes
-    local-prefixes: github.com/org/project
+    local-prefixes: github.com/OpenIMSDK/OpenKF
   golint:
     # minimal confidence for issues, default is 0.8
     min-confidence: 0.9
@@ -111,16 +343,91 @@ linters-settings:
       mnd:
         # the list of enabled checks, see https://github.com/tommy-muehle/go-mnd/#checks for description.
         checks: argument,case,condition,operation,return,assign
+        # ignored-numbers: 1000
+        # ignored-files: magic_.*.go
+        # ignored-functions: math.*
+  gomoddirectives:
+    # Allow local `replace` directives. Default is false.
+    replace-local: true
+    # List of allowed `replace` directives. Default is empty.
+    replace-allow-list:
+      - google.golang.org/grpc
+
+    # Allow to not explain why the version has been retracted in the `retract` directives. Default is false.
+    retract-allow-no-explanation: false
+    # Forbid the use of the `exclude` directives. Default is false.
+    exclude-forbidden: false
   gomodguard:
     allowed:
-      modules:                                                        # List of allowed modules
+      modules:    
+        - gorm.io/gen                                                    # List of allowed modules
+        - gorm.io/gorm
+        - gorm.io/driver/mysql
+        - k8s.io/klog
         # - gopkg.in/yaml.v2
       domains:                                                        # List of allowed module domains
-        # - golang.org
+        - google.golang.org
+        - gopkg.in
+        - golang.org
+        - github.com
+        - go.uber.org
+        - go.etcd.io
+    blocked:
+      versions:
+        - github.com/MakeNowJust/heredoc:
+            version: "> 2.0.9"
+            reason: "use the latest version"
+      local_replace_directives: false     # Set to true to raise lint issues for packages that are loaded from a local path via replace directive
+
+  gosec:
+    # To select a subset of rules to run.
+    # Available rules: https://github.com/securego/gosec#available-rules
+    includes:
+      - G401
+      - G306
+      - G101
+    # To specify a set of rules to explicitly exclude.
+    # Available rules: https://github.com/securego/gosec#available-rules
+    excludes:
+      - G204
+    # Exclude generated files
+    exclude-generated: true
+    # Filter out the issues with a lower severity than the given value. Valid options are: low, medium, high.
+    severity: "low"
+    # Filter out the issues with a lower confidence than the given value. Valid options are: low, medium, high.
+    confidence: "low"
+    # To specify the configuration of rules.
+    # The configuration of rules is not fully documented by gosec:
+    # https://github.com/securego/gosec#configuration
+    # https://github.com/securego/gosec/blob/569328eade2ccbad4ce2d0f21ee158ab5356a5cf/rules/rulelist.go#L60-L102
+    config:
+      G306: "0600"
+      G101:
+        pattern: "(?i)example"
+        ignore_entropy: false
+        entropy_threshold: "80.0"
+        per_char_threshold: "3.0"
+        truncate: "32"
+
+  gosimple:
+    # Select the Go version to target. The default is '1.13'.
+    go: "1.20"
+    # https://staticcheck.io/docs/options#checks
+    checks: [ "all" ]
+
   govet:
     # report about shadowed variables
     check-shadowing: true
 
+    # settings per analyzer
+    settings:
+      printf: # analyzer name, run `go tool vet help` to see all analyzers
+        funcs: # run `go tool vet help printf` to see available settings for `printf` analyzer
+          - (github.com/golangci/golangci-lint/pkg/logutils.Log).Infof
+          - (github.com/golangci/golangci-lint/pkg/logutils.Log).Warnf
+          - (github.com/golangci/golangci-lint/pkg/logutils.Log).Errorf
+          - (github.com/golangci/golangci-lint/pkg/logutils.Log).Fatalf
+
     # enable or disable analyzers by name
     enable:
       - atomicalign
@@ -128,17 +435,69 @@ linters-settings:
     disable:
       - shadow
     disable-all: false
-  depguard:
-    list-type: blacklist
-    include-go-root: false
-    packages:
-    packages-with-error-message:
+  # depguard:
+  #   list-type: blacklist
+  #   include-go-root: false
+  #   packages:
+  #     - github.com/Sirupsen/logrus
+  #   packages-with-error-message:
+  #     # specify an error message to output when a blacklisted package is used
+  #     - github.com/Sirupsen/logrus: "logging is allowed only by logutils.Log"
+  ifshort:
+    # Maximum length of variable declaration measured in number of lines, after which linter won't suggest using short syntax.
+    # Has higher priority than max-decl-chars.
+    max-decl-lines: 1
+    # Maximum length of variable declaration measured in number of characters, after which linter won't suggest using short syntax.
+    max-decl-chars: 30
+
+  importas:
+    # if set to `true`, force to use alias.
+    no-unaliased: true
+    # List of aliases
+    alias:
+      # using `servingv1` alias for `knative.dev/serving/pkg/apis/serving/v1` package
+      - pkg: knative.dev/serving/pkg/apis/serving/v1
+        alias: servingv1
+      # using `autoscalingv1alpha1` alias for `knative.dev/serving/pkg/apis/autoscaling/v1alpha1` package
+      - pkg: knative.dev/serving/pkg/apis/autoscaling/v1alpha1
+        alias: autoscalingv1alpha1
+      # You can specify the package path by regular expression,
+      # and alias by regular expression expansion syntax like below.
+      # see https://github.com/julz/importas#use-regular-expression for details
+      - pkg: knative.dev/serving/pkg/apis/(\w+)/(v[\w\d]+)
+        alias: $1$2
+    # using `jwt` alias for `github.com/appleboy/gin-jwt/v2` package
+    jwt: github.com/appleboy/gin-jwt/v2
+
+  ireturn:
+    # ireturn allows using `allow` and `reject` settings at the same time.
+    # Both settings are lists of the keywords and regular expressions matched to interface or package names.
+    # keywords:
+    # - `empty` for `interface{}`
+    # - `error` for errors
+    # - `stdlib` for standard library
+    # - `anon` for anonymous interfaces
+
+    # By default, it allows using errors, empty interfaces, anonymous interfaces,
+    # and interfaces provided by the standard library.
+    allow:
+    - anon
+    - error
+    - empty
+    - stdlib
+    # You can specify idiomatic endings for interface
+    - (or|er)$
+
+    # Reject patterns
+    reject:
+    - github.com\/user\/package\/v4\.Type
+
   lll:
     # max line length, lines longer will be reported. Default is 120.
     # '\t' is counted as 1 character by default, and can be changed with the tab-width option
-    line-length: 120
+    line-length: 240
     # tab width in spaces. Default to 1.
-    tab-width: 1
+    tab-width: 4
   maligned:
     # print struct with more effective memory layout or not, false by default
     suggest-new: true
@@ -152,6 +511,37 @@ linters-settings:
   nakedret:
     # make an issue if func has more lines of code than this setting and it has naked returns; default is 30
     max-func-lines: 30
+
+  nestif:
+    # minimal complexity of if statements to report, 5 by default
+    min-complexity: 4
+
+  nilnil:
+    # By default, nilnil checks all returned types below.
+    checked-types:
+      - ptr
+      - func
+      - iface
+      - map
+      - chan
+
+  nlreturn:
+    # size of the block (including return statement that is still "OK")
+    # so no return split required.
+    block-size: 1
+
+  nolintlint:
+    # Disable to ensure that all nolint directives actually have an effect. Default is true.
+    allow-unused: false
+    # Disable to ensure that nolint directives don't have a leading space. Default is true.
+    allow-leading-space: true
+    # Exclude following linters from requiring an explanation.  Default is [].
+    allow-no-explanation: [ ]
+    # Enable to require an explanation of nonzero length after each nolint directive. Default is false.
+    require-explanation: false
+    # Enable to require nolint directives to mention the specific linter being suppressed. Default is false.
+    require-specific: true
+
   prealloc:
     # XXX: we don't recommend using this linter before doing performance profiling.
     # For most programs usage of prealloc will be a premature optimization.
@@ -161,17 +551,97 @@ linters-settings:
     simple: true
     range-loops: true # Report preallocation suggestions on range loops, true by default
     for-loops: false # Report preallocation suggestions on for loops, false by default
-  nolintlint:
-    # Enable to ensure that nolint directives are all used. Default is true.
-    allow-unused: false
-    # Disable to ensure that nolint directives don't have a leading space. Default is true.
-    allow-leading-space: true
-    # Exclude following linters from requiring an explanation.  Default is [].
-    allow-no-explanation: []
-    # Enable to require an explanation of nonzero length after each nolint directive. Default is false.
-    require-explanation: true
-    # Enable to require nolint directives to mention the specific linter being suppressed. Default is false.
-    require-specific: true
+
+  promlinter:
+    # Promlinter cannot infer all metrics name in static analysis.
+    # Enable strict mode will also include the errors caused by failing to parse the args.
+    strict: false
+    # Please refer to https://github.com/yeya24/promlinter#usage for detailed usage.
+    disabled-linters:
+    #  - "Help"
+    #  - "MetricUnits"
+    #  - "Counter"
+    #  - "HistogramSummaryReserved"
+    #  - "MetricTypeInName"
+    #  - "ReservedChars"
+    #  - "CamelCase"
+    #  - "lintUnitAbbreviations"
+    
+  predeclared:
+    # comma-separated list of predeclared identifiers to not report on
+    ignore: ""
+    # include method names and field names (i.e., qualified names) in checks
+    q: false
+  rowserrcheck:
+    packages:
+      - github.com/jmoiron/sqlx
+  revive:
+    # see https://github.com/mgechev/revive#available-rules for details.
+    ignore-generated-header: true
+    severity: warning
+    rules:
+      - name: indent-error-flow
+        severity: warning
+  staticcheck:
+    # Select the Go version to target. The default is '1.13'.
+    go: "1.16"
+    # https://staticcheck.io/docs/options#checks
+    checks: [ "all" ]
+
+  stylecheck:
+    # Select the Go version to target. The default is '1.13'.
+    go: "1.16"
+
+    # https://staticcheck.io/docs/options#checks
+    checks: [ "all", "-ST1000", "-ST1003", "-ST1016", "-ST1020", "-ST1021", "-ST1022" ]
+    # https://staticcheck.io/docs/options#dot_import_whitelist
+    dot-import-whitelist:
+      - fmt
+    # https://staticcheck.io/docs/options#initialisms
+    initialisms: [ "ACL", "API", "ASCII", "CPU", "CSS", "DNS", "EOF", "GUID", "HTML", "HTTP", "HTTPS", "ID", "IP", "JSON", "QPS", "RAM", "RPC", "SLA", "SMTP", "SQL", "SSH", "TCP", "TLS", "TTL", "UDP", "UI", "GID", "UID", "UUID", "URI", "URL", "UTF8", "VM", "XML", "XMPP", "XSRF", "XSS" ]
+    # https://staticcheck.io/docs/options#http_status_code_whitelist
+    http-status-code-whitelist: [ "200", "400", "404", "500" ]
+
+
+  tagliatelle:
+    # check the struck tag name case
+    case:
+      # use the struct field name to check the name of the struct tag
+      use-field-name: true
+      rules:
+        # any struct tag type can be used.
+        # support string case: `camel`, `pascal`, `kebab`, `snake`, `goCamel`, `goPascal`, `goKebab`, `goSnake`, `upper`, `lower`
+        json: camel
+        yaml: camel
+        xml: camel
+        bson: camel
+        avro: snake
+        mapstructure: kebab
+
+  testpackage:
+    # regexp pattern to skip files
+    skip-regexp: (id|export|internal)_test\.go
+  thelper:
+    # The following configurations enable all checks. It can be omitted because all checks are enabled by default.
+    # You can enable only required checks deleting unnecessary checks.
+    test:
+      first: true
+      name: true
+      begin: true
+    benchmark:
+      first: true
+      name: true
+      begin: true
+    tb:
+      first: true
+      name: true
+      begin: true
+
+  tenv:
+    # The option `all` will run against whole test files (`_test.go`) regardless of method/function signatures.
+    # By default, only methods that take `*testing.T`, `*testing.B`, and `testing.TB` as arguments are checked.
+    all: false
+
   unparam:
     # Inspect exported functions, default is false. Set to true if no external program/library imports your code.
     # XXX: if you enable this setting, unparam will report a lot of false-positives in text editors:
@@ -187,6 +657,24 @@ linters-settings:
   whitespace:
     multi-if: false   # Enforces newlines (or comments) after every multi-line if statement
     multi-func: false # Enforces newlines (or comments) after every multi-line function signature
+
+  wrapcheck:
+    # An array of strings that specify substrings of signatures to ignore.
+    # If this set, it will override the default set of ignored signatures.
+    # See https://github.com/tomarrell/wrapcheck#configuration for more information.
+    ignoreSigs:
+      - .Errorf(
+      - errors.New(
+      - errors.Unwrap(
+      - .Wrap(
+      - .Wrapf(
+      - .WithMessage(
+      - .WithMessagef(
+      - .WithStack(
+    ignorePackageGlobs:
+        - encoding/*
+        - github.com/pkg/*
+
   wsl:
     # If true append is only allowed to be cuddled if appending value is
     # matching variables, fields or types on line above. Default is true.
@@ -194,6 +682,8 @@ linters-settings:
     # Allow calls and assignments to be cuddled as long as the lines have any
     # matching variables, fields or types. Default is true.
     allow-assign-and-call: true
+    # Allow assignments to be cuddled with anything. Default is false.
+    allow-assign-and-anything: false
     # Allow multiline assignments to be cuddled. Default is true.
     allow-multiline-assign: true
     # Allow declarations (var) to be cuddled.
@@ -206,65 +696,181 @@ linters-settings:
     force-err-cuddling: false
     # Allow leading comments to be separated with empty liens
     allow-separated-leading-comment: false
+  makezero:
+    # Allow only slices initialized with a length of zero. Default is false.
+    always: false
+
+
+  # The custom section can be used to define linter plugins to be loaded at runtime. See README doc
+  #  for more info.
+  #custom:
+    # Each custom linter should have a unique name.
+    #example:
+      # The path to the plugin *.so. Can be absolute or local. Required for each custom linter
+      #path: /path/to/example.so
+      # The description of the linter. Optional, just for documentation purposes.
+      #description: This is an example usage of a plugin linter.
+      # Intended to point to the repo location of the linter. Optional, just for documentation purposes.
+      #original-url: github.com/golangci/example-linter
 
 linters:
   # please, do not use `enable-all`: it's deprecated and will be removed soon.
   # inverted configuration with `enable-all` and `disable` is not scalable during updates of golangci-lint
+  # enable-all: true
   disable-all: true
   enable:
+    - typecheck
+    - asciicheck
     - bodyclose
+    - cyclop
     - deadcode
-    - depguard
+    # - depguard
     - dogsled
     - dupl
+    - durationcheck
     - errcheck
+    - errorlint
+    - exhaustive
+    - exportloopref
+    # - forbidigo
     - funlen
-    - gochecknoinits
+    # - gci
+    # - gochecknoinits
+    - gocognit
     - goconst
-    - gocritic
     - gocyclo
+    - godot
+    - godox
     - gofmt
+    - gofumpt
+    - goheader
     - goimports
-    - golint
+    - gomoddirectives
+    - gomodguard
     - goprintffuncname
     - gosec
     - gosimple
     - govet
+    - ifshort
+    - importas
     - ineffassign
-    - interfacer
     - lll
+    - makezero
     - misspell
     - nakedret
+    - nestif
+    - nilerr
+    - nlreturn
+    - noctx
     - nolintlint
+    - paralleltest
+    - prealloc
+    - predeclared
+    - promlinter
+    - revive
     - rowserrcheck
-    - scopelint
+    - sqlclosecheck
     - staticcheck
     - structcheck
     - stylecheck
-    - typecheck
+    - thelper
+    - tparallel
     - unconvert
     - unparam
     - unused
     - varcheck
+    - wastedassign
     - whitespace
-    - asciicheck
-    - gocognit
-    - godot
-    - godox
-    - maligned
-    - nestif
-    - prealloc
-    - gomodguard
-  # don't enable:
-      #- goerr113
-      #- wsl
-      #- testpackage
-      #- exhaustive (TODO: enable after next release; current release at time of writing is v1.27)
-      #- gochecknoglobals
-      #- gomnd
+    - bidichk
+    - wastedassign
+    - golint
+    - execinquery
+    - nosprintfhostport
+    - grouper
+    - decorder
+    - errchkjson
+    - maintidx
+      #- containedctx
+      #- tagliatelle
+      #- nonamedreturns
+      #- nilnil
+      #- tenv
+      #- varnamelen
+      #- contextcheck
+      #- errname
+      #- ForceTypeAssert
+      #- nilassign
+  fast: false
 
 issues:
+  # List of regexps of issue texts to exclude, empty list by default.
+  # But independently from this option we use default exclude patterns,
+  # it can be disabled by `exclude-use-default: false`. To list all
+  # excluded by default patterns execute `golangci-lint run --help`
+  exclude:
+    - tools/.*
+    - test/.*
+    - third_party/.*
+
   # Excluding configuration per-path, per-linter, per-text and per-source
+  exclude-rules:
+    - linters:
+      - golint
+      path: (internal/api/.*)\.go # exclude golint for internal/api/... files
+
+    - linters:
+      - revive
+      path: (log/.*)\.go
+
+    - linters:
+      - wrapcheck
+      path: (cmd/.*|pkg/.*)\.go
+
+    - linters:
+      - typecheck
+        #path: (pkg/storage/.*)\.go
+      path: (internal/.*|pkg/.*)\.go
+
+    - path: (cmd/.*|test/.*|tools/.*|internal/pump/pumps/.*)\.go
+      linters:
+        - forbidigo
+
+    - path: (cmd/[a-z]*/.*|store/.*)\.go
+      linters:
+        - dupl
+
+    - linters:
+        - gocritic
+      text: (hugeParam:|rangeValCopy:)
+
+    - path: (cmd/[a-z]*/.*)\.go
+      linters:
+        - lll
+
+    - path: (validator/.*|code/.*|validator/.*|watcher/watcher/.*)
+      linters:
+        - gochecknoinits
+
+    - path: (internal/.*/options|internal/pump|pkg/log/options.go|internal/authzserver|tools/)
+      linters:
+        - tagliatelle
+
+    - path: (pkg/app/.*)\.go
+      linters:
+        - deadcode
+        - unused
+        - varcheck
+        - forbidigo
+
+    # Exclude some staticcheck messages
+    - linters:
+        - staticcheck
+      text: "SA9003:"
+
+    # Exclude lll issues for long lines with go:generate
+    - linters:
+        - lll
+      source: "^//go:generate "
 
   # Independently from option `exclude` we use default exclude patterns,
   # it can be disabled by this option. To list all
@@ -300,24 +906,27 @@ issues:
   # Show only new issues created in git patch with set file path.
   #new-from-patch: path/to/patch/file
 
+  # Fix found issues (if it's supported by the linter)
+  fix: true
+
 severity:
   # Default value is empty string.
-  # Set the default severity for issues. If severity rules are defined and the issues 
-  # do not match or no severity is provided to the rule this will be the default 
-  # severity applied. Severities should match the supported severity names of the 
+  # Set the default severity for issues. If severity rules are defined and the issues
+  # do not match or no severity is provided to the rule this will be the default
+  # severity applied. Severities should match the supported severity names of the
   # selected out format.
   # - Code climate: https://docs.codeclimate.com/docs/issues#issue-severity
   # -   Checkstyle: https://checkstyle.sourceforge.io/property_types.html#severity
   # -       Github: https://help.github.com/en/actions/reference/workflow-commands-for-github-actions#setting-an-error-message
   default-severity: error
 
-  # The default value is false. 
+  # The default value is false.
   # If set to true severity-rules regular expressions become case sensitive.
   case-sensitive: false
 
   # Default value is empty list.
   # When a list of severity rules are provided, severity information will be added to lint
-  # issues. Severity rules have the same filtering capability as exclude rules except you 
+  # issues. Severity rules have the same filtering capability as exclude rules except you
   # are allowed to specify one matcher per severity rule.
   # Only affects out formats that support setting severity information.
   rules:

.goreleaser.yaml

@@ -0,0 +1,523 @@
+# This is an example .goreleaser.yml file with some sensible defaults.
+# Make sure to check the documentation at https://goreleaser.com
+
+before:
+  hooks:
+    # You may remove this if you don't use go modules.
+    - make tidy
+    - make copyright.add
+    # you may remove this if you don't need go generate
+    - go generate ./...
+
+snapshot:
+  name_template: "{{ incpatch .Version }}-next"
+
+# gomod:
+#   proxy: true
+
+report_sizes: true
+
+# metadata:
+#   mod_timestamp: "{{ .CommitTimestamp }}"
+
+builds:
+  - binary: openim-api
+    id: openim-api
+    main: ./cmd/openim-api/main.go
+    goos:
+      - darwin
+      - windows
+      - linux
+    goarch:
+      - s390x
+      - mips64
+      - mips64le
+      - amd64
+      - ppc64le
+      - arm64
+    goarm:
+      - "6"
+      - "7"
+
+  - binary: openim-cmdutils
+    id: openim-cmdutils
+    main: ./cmd/openim-cmdutils/main.go
+    goos:
+      - darwin
+      - windows
+      - linux
+    goarch:
+      - s390x
+      - mips64
+      - mips64le
+      - amd64
+      - ppc64le
+      - arm64
+    goarm:
+      - "6"
+      - "7"
+
+  - binary: openim-crontask
+    id: openim-crontask
+    main: ./cmd/openim-crontask/main.go
+    goos:
+      - darwin
+      - windows
+      - linux
+    goarch:
+      - s390x
+      - mips64
+      - mips64le
+      - amd64
+      - ppc64le
+      - arm64
+    goarm:
+      - "6"
+      - "7"
+
+  - binary: openim-msggateway
+    id: openim-msggateway
+    main: ./cmd/openim-msggateway/main.go
+    goos:
+      - darwin
+      - windows
+      - linux
+    goarch:
+      - s390x
+      - mips64
+      - mips64le
+      - amd64
+      - ppc64le
+      - arm64
+    goarm:
+      - "6"
+      - "7"
+
+  - binary: openim-msgtransfer
+    id: openim-msgtransfer
+    main: ./cmd/openim-msgtransfer/main.go
+    goos:
+      - darwin
+      - windows
+      - linux
+    goarch:
+      - s390x
+      - mips64
+      - mips64le
+      - amd64
+      - ppc64le
+      - arm64
+    goarm:
+      - "6"
+      - "7"
+
+  - binary: openim-push
+    id: openim-push
+    main: ./cmd/openim-push/main.go
+    goos:
+      - darwin
+      - windows
+      - linux
+    goarch:
+      - s390x
+      - mips64
+      - mips64le
+      - amd64
+      - ppc64le
+      - arm64
+    goarm:
+      - "6"
+      - "7"
+
+  - binary: openim-rpc-auth
+    id: openim-rpc-auth
+    main: ./cmd/openim-rpc/openim-rpc-auth/main.go
+    goos:
+      - darwin
+      - windows
+      - linux
+    goarch:
+      - s390x
+      - mips64
+      - mips64le
+      - amd64
+      - ppc64le
+      - arm64
+    goarm:
+      - "6"
+      - "7"
+
+  - binary: openim-rpc-conversation
+    id: openim-rpc-conversation
+    main: ./cmd/openim-rpc/openim-rpc-conversation/main.go
+    goos:
+      - darwin
+      - windows
+      - linux
+    goarch:
+      - s390x
+      - mips64
+      - mips64le
+      - amd64
+      - ppc64le
+      - arm64
+    goarm:
+      - "6"
+      - "7"
+
+  - binary: openim-rpc-friend
+    id: openim-rpc-friend
+    main: ./cmd/openim-rpc/openim-rpc-friend/main.go
+    goos:
+      - darwin
+      - windows
+      - linux
+    goarch:
+      - s390x
+      - mips64
+      - mips64le
+      - amd64
+      - ppc64le
+      - arm64
+    goarm:
+      - "6"
+      - "7"
+
+  - binary: openim-rpc-group
+    id: openim-rpc-group
+    main: ./cmd/openim-rpc/openim-rpc-group/main.go
+    goos:
+      - darwin
+      - windows
+      - linux
+    goarch:
+      - s390x
+      - mips64
+      - mips64le
+      - amd64
+      - ppc64le
+      - arm64
+    goarm:
+      - "6"
+      - "7"
+
+  - binary: openim-rpc-msg
+    id: openim-rpc-msg
+    main: ./cmd/openim-rpc/openim-rpc-msg/main.go
+    goos:
+      - darwin
+      - windows
+      - linux
+    goarch:
+      - s390x
+      - mips64
+      - mips64le
+      - amd64
+      - ppc64le
+      - arm64
+    goarm:
+      - "6"
+      - "7"
+
+  - binary: openim-rpc-third
+    id: openim-rpc-third
+    main: ./cmd/openim-rpc/openim-rpc-third/main.go
+    goos:
+      - darwin
+      - windows
+      - linux
+    goarch:
+      - s390x
+      - mips64
+      - mips64le
+      - amd64
+      - ppc64le
+      - arm64
+    goarm:
+      - "6"
+      - "7"
+
+  - binary: openim-rpc-user
+    id: openim-rpc-user
+    main: ./cmd/openim-rpc/openim-rpc-user/main.go
+    goos:
+      - darwin
+      - windows
+      - linux
+    goarch:
+      - s390x
+      - mips64
+      - mips64le
+      - amd64
+      - ppc64le
+      - arm64
+    goarm:
+      - "6"
+      - "7"
+
+archives:
+  - format: tar.gz
+    # this name template makes the OS and Arch compatible with the results of uname.
+    name_template: >-
+      {{ .ProjectName }}_
+      {{- title .Os }}_
+      {{- if eq .Arch "amd64" }}x86_64
+      {{- else if eq .Arch "386" }}i386
+      {{- else }}{{ .Arch }}{{ end }}
+      {{- if .Arm }}v{{ .Arm }}{{ end }}
+    # use zip for windows archives
+    files:
+      - LICENSE
+      - README.md
+      - CHANGELOG/*
+      - CONTRIBUTING.md
+      - docs/*
+      - src: "*.md"
+        dst: docs
+
+        # Strip parent folders when adding files to the archive.
+        strip_parent: true
+
+        # File info.
+        # Not all fields are supported by all formats available formats.
+        #
+        # Default: copied from the source file
+        info:
+          # Templates: allowed (since v1.14)
+          owner: root
+
+          # Templates: allowed (since v1.14)
+          group: root
+
+          # Must be in time.RFC3339Nano format.
+          #
+          # Templates: allowed (since v1.14)
+          mtime: "{{ .CommitDate }}"
+
+          # File mode.
+          mode: 0644
+
+    format_overrides:
+    - goos: windows
+      format: zip
+
+changelog:
+  sort: asc
+  use: github
+  filters:
+    exclude:
+      - "^test:"
+      - "^chore"
+      - "merge conflict"
+      - Merge pull request
+      - Merge remote-tracking branch
+      - Merge branch
+      - go mod tidy
+  groups:
+    - title: Dependency updates
+      regexp: '^.*?(feat|fix)\(deps\)!?:.+$'
+      order: 300
+    - title: "New Features"
+      regexp: '^.*?feat(\([[:word:]]+\))??!?:.+$'
+      order: 100
+    - title: "Security updates"
+      regexp: '^.*?sec(\([[:word:]]+\))??!?:.+$'
+      order: 150
+    - title: "Bug fixes"
+      regexp: '^.*?fix(\([[:word:]]+\))??!?:.+$'
+      order: 200
+    - title: "Documentation updates"
+      regexp: ^.*?doc(\([[:word:]]+\))??!?:.+$
+      order: 400
+    - title: "Build process updates"
+      regexp: ^.*?build(\([[:word:]]+\))??!?:.+$
+      order: 400
+    - title: Other work
+      order: 9999
+
+dockers:
+  - image_templates:
+      - "openim/openim-server:{{ .Tag }}-amd64"
+      - "ghcr.io/openimsdk/openim-server:{{ .Tag }}-amd64"
+    dockerfile: Dockerfile
+    use: buildx
+    build_flag_templates:
+      - "--pull"
+      - "--label=io.artifacthub.package.readme-url=https://raw.githubusercontent.com/OpenIMSDK/Open-IM-Server/main/README.md"
+      - "--label=io.artifacthub.package.logo-url=hhttps://github.com/OpenIMSDK/Open-IM-Server/blob/main/assets/logo/openim-logo-green.png"
+      - '--label=io.artifacthub.package.maintainers=[{"name":"Xinwei Xiong","email":"3293172751nss@gmail.com"}]'
+      - "--label=io.artifacthub.package.license=Apace-2.0"
+      - "--label=org.opencontainers.image.description=OpenIM Open source top instant messaging system"
+      - "--label=org.opencontainers.image.created={{.Date}}"
+      - "--label=org.opencontainers.image.name={{.ProjectName}}"
+      - "--label=org.opencontainers.image.revision={{.FullCommit}}"
+      - "--label=org.opencontainers.image.version={{.Version}}"
+      - "--label=org.opencontainers.image.source={{.GitURL}}"
+      - "--platform=linux/amd64"
+    extra_files:
+      - scripts/entrypoint.sh
+  - image_templates:
+      - "goreleaser/goreleaser:{{ .Tag }}-arm64"
+      - "ghcr.io/goreleaser/goreleaser:{{ .Tag }}-arm64"
+    dockerfile: Dockerfile
+    use: buildx
+    build_flag_templates:
+      - "--pull"
+      - "--label=io.artifacthub.package.readme-url=https://raw.githubusercontent.com/OpenIMSDK/Open-IM-Server/main/README.md"
+      - "--label=io.artifacthub.package.logo-url=hhttps://github.com/OpenIMSDK/Open-IM-Server/blob/main/assets/logo/openim-logo-green.png"
+      - '--label=io.artifacthub.package.maintainers=[{"name":"Xinwei Xiong","email":"3293172751nss@gmail.com"}]'
+      - "--label=io.artifacthub.package.license=Apace-2.0"
+      - "--label=org.opencontainers.image.description=OpenIM Open source top instant messaging system"
+      - "--label=org.opencontainers.image.created={{.Date}}"
+      - "--label=org.opencontainers.image.name={{.ProjectName}}"
+      - "--label=org.opencontainers.image.revision={{.FullCommit}}"
+      - "--label=org.opencontainers.image.version={{.Version}}"
+      - "--label=org.opencontainers.image.source={{.GitURL}}"
+      - "--platform=linux/arm64"
+    goarch: arm64
+    extra_files:
+      - scripts/entrypoint.sh
+
+docker_manifests:
+  - name_template: "goreleaser/goreleaser:{{ .Tag }}"
+    image_templates:
+      - "goreleaser/goreleaser:{{ .Tag }}-amd64"
+      - "goreleaser/goreleaser:{{ .Tag }}-arm64"
+  - name_template: "ghcr.io/goreleaser/goreleaser:{{ .Tag }}"
+    image_templates:
+      - "ghcr.io/goreleaser/goreleaser:{{ .Tag }}-amd64"
+      - "ghcr.io/goreleaser/goreleaser:{{ .Tag }}-arm64"
+  - name_template: "goreleaser/goreleaser:latest"
+    image_templates:
+      - "goreleaser/goreleaser:{{ .Tag }}-amd64"
+      - "goreleaser/goreleaser:{{ .Tag }}-arm64"
+  - name_template: "ghcr.io/goreleaser/goreleaser:latest"
+    image_templates:
+      - "ghcr.io/goreleaser/goreleaser:{{ .Tag }}-amd64"
+      - "ghcr.io/goreleaser/goreleaser:{{ .Tag }}-arm64"
+
+nfpms:
+  - id: packages
+    builds:
+      - openim-api
+      - openim-cmdutils
+      - openim-crontask
+      - openim-msggateway
+      - openim-msgtransfer
+      - openim-push
+      - openim-rpc-auth
+      - openim-rpc-conversation
+      - openim-rpc-friend
+      - openim-rpc-group
+      - openim-rpc-msg
+      - openim-rpc-third
+      - openim-rpc-user
+    # Your app's vendor.
+    vendor: OpenIMSDK
+    homepage: https://github.com/OpenIMSDK/Open-IM-Server
+    maintainer: kubbot <https://github.com/kubbot>
+    description: |-
+      Auto sync github labels
+      kubbot && openimbot
+    license: MIT
+    formats:
+      - apk
+      - deb
+      - rpm
+      - termux.deb # Since: v1.11
+      - archlinux # Since: v1.13
+    dependencies:
+      - git
+    recommends:
+      - golang
+
+
+# The lines beneath this are called `modelines`. See `:help modeline`
+# Feel free to remove those if you don't want/use them.
+# yaml-language-server: $schema=https://goreleaser.com/static/schema.json
+# vim: set ts=2 sw=2 tw=0 fo=cnqoj
+
+# Default: './dist'
+dist: ./_output/dist
+
+# .goreleaser.yaml
+milestones:
+  # You can have multiple milestone configs
+  -
+    # Repository for the milestone
+    # Default is extracted from the origin remote URL
+    repo:
+      owner: user
+      name: repo
+
+    # Whether to close the milestone
+    close: true
+
+    # Fail release on errors, such as missing milestone.
+    fail_on_error: false
+
+    # Name of the milestone
+    #
+    # Default: '{{ .Tag }}'
+    name_template: "Current Release"
+
+# publishers:
+#   - name: "fury.io"
+#     ids:
+#       - packages
+#     dir: "{{ dir .ArtifactPath }}"
+#     cmd: |
+#       bash -c '
+#       if [[ "{{ .Tag }}" =~ ^v[0-9]+\.[0-9]+\.[0-9]+$ ]]; then
+#         curl -F package=@{{ .ArtifactName }} https://{{ .Env.FURY_TOKEN }}@push.fury.io/{{ .Env.USERNAME }}/
+#       else
+#         echo "Skipping deployment: Non-production release detected"
+#       fi'
+
+checksum:
+  name_template: "{{ .ProjectName }}_checksums.txt"
+  algorithm: sha256
+
+release:
+  footer: |
+  
+    ## Welcome to the {{ .Tag }} release of [chat](https://github.com/OpenIMSDK/chat)!🎉🎉!
+
+    **Full Changelog**: https://github.com/OpenIMSDK/Open-IM-Server/compare/{{ .PreviousTag }}...{{ .Tag }}
+
+    ## Helping out
+
+    We release logs are recorded on [✨ CHANGELOG](https://github.com/OpenIMSDK/Open-IM-Server/blob/main/CHANGELOG/CHANGELOG.md)
+
+    This release is only possible thanks to **all** the support of some **awesome people**!
+
+    **Want to be one of them 😘?**
+
+    Contributions to this project are welcome! Please see [CONTRIBUTING.md](https://github.com/OpenIMSDK/Open-IM-Server/blob/main/CONTRIBUTING.md) for details.
+
+    <p align="center">
+        <a href="https://github.com/kubbot" style="float: left; margin-right: 10px;">
+            <img src="https://github.com/openimbot/openimbot/blob/main/assets/icon/blue%E9%80%8F%E6%98%8E.png" width="50" height="50" />
+        </a>
+        <a href="https://www.openim.online">
+            <img src="https://github.com/OpenIMSDK/Open-IM-Server/blob/main/assets/logo/openim-logo.png" />
+        </a>
+        <a href="https://github.com/openimbot" style="float: right; margin-left: 10px;">
+            <img src="https://github.com/openimbot/openimbot/blob/main/assets/icon/red%E9%80%8F%E6%98%8E.png" width="50" height="50" />
+        </a>
+    </p>
+
+
+    ## Get Involved with OpenIM!
+
+    **Here are some ways to get involved with the OpenIM community:**
+
+    📢 **Slack Channel**: Join our Slack channels for discussions, communication, and support. Click [here](https://join.slack.com/t/openimsdk/shared_invite/zt-1tmoj26uf-_FDy3dowVHBiGvLk9e5Xkg) to join the Open-IM-Server Slack team channel.
+
+    📧 **Gmail Contact**: If you have any questions, suggestions, or feedback for our open-source projects, please feel free to [contact us via email](https://mail.google.com/mail/?view=cm&fs=1&tf=1&to=winxu81@gmail.com).
+
+    📖 **Blog**: Stay up-to-date with OpenIM-Server projects and trends by reading our [blog](https://doc.rentsoft.cn/). We share the latest developments, tech trends, and other interesting information related to OpenIM.
+
+    📱 **WeChat**: Add us on WeChat (QR Code) and indicate that you are a user or developer of Open-IM-Server. We'll process your request as soon as possible.
+
+    Remember, your contributions play a vital role in making OpenIM successful, and we look forward to your active participation in our community! 🙌

CHANGELOG.md

@@ -0,0 +1 @@
+CHANGELOG/CHANGELOG.md

CHANGELOG/.chglog/CHANGELOG.tpl.md

@@ -1,40 +1,62 @@
+# Version logging for OpenIM
+
+<!-- BEGIN MUNGE: GENERATED_TOC -->
+
+<!-- END MUNGE: GENERATED_TOC -->
+
+{{ if .Versions -}}
+<a name="unreleased"></a>
+## [Unreleased]
+
+{{ if .Unreleased.CommitGroups -}}
+{{ range .Unreleased.CommitGroups -}}
+### {{ .Title }}
+{{ range .Commits -}}
+- {{ if .Scope }}**{{ .Scope }}:** {{ end }}{{ .Subject }}
+{{ end }}
+{{ end -}}
+{{ end -}}
+{{ end -}}
+
 {{ range .Versions }}
 <a name="{{ .Tag.Name }}"></a>
-## {{ if .Tag.Previous }}[{{ .Tag.Name }}]({{ $.Info.RepositoryURL }}/compare/{{ .Tag.Previous.Name }}...{{ .Tag.Name }}){{ else }}{{ .Tag.Name }}{{ end }}
-
-> {{ datetime "2006-01-02" .Tag.Date }}
-
+## {{ if .Tag.Previous }}[{{ .Tag.Name }}]{{ else }}{{ .Tag.Name }}{{ end }} - {{ datetime "2006-01-02" .Tag.Date }}
 {{ range .CommitGroups -}}
 ### {{ .Title }}
-
 {{ range .Commits -}}
-* {{ if .Scope }}**{{ .Scope }}:** {{ end }}{{ .Subject }}
+- {{ if .Scope }}**{{ .Scope }}:** {{ end }}{{ .Subject }}
 {{ end }}
 {{ end -}}
 
 {{- if .RevertCommits -}}
 ### Reverts
-
 {{ range .RevertCommits -}}
-* {{ .Revert.Header }}
+- {{ .Revert.Header }}
 {{ end }}
 {{ end -}}
 
 {{- if .MergeCommits -}}
 ### Pull Requests
-
 {{ range .MergeCommits -}}
-* {{ .Header }}
+- {{ .Header }}
 {{ end }}
 {{ end -}}
 
 {{- if .NoteGroups -}}
 {{ range .NoteGroups -}}
 ### {{ .Title }}
-
 {{ range .Notes }}
 {{ .Body }}
 {{ end }}
 {{ end -}}
 {{ end -}}
+{{ end -}}
+
+{{- if .Versions }}
+[Unreleased]: {{ .Info.RepositoryURL }}/compare/{{ $latest := index .Versions 0 }}{{ $latest.Tag.Name }}...HEAD
+{{ range .Versions -}}
+{{ if .Tag.Previous -}}
+[{{ .Tag.Name }}]: {{ $.Info.RepositoryURL }}/compare/{{ .Tag.Previous.Name }}...{{ .Tag.Name }}
+{{ end -}}
+{{ end -}}
 {{ end -}}

CHANGELOG/.chglog/config.yml

@@ -1,28 +1,67 @@
+bin: git
 style: github
 template: CHANGELOG.tpl.md
 info:
   title: CHANGELOG
   repository_url: https://github.com/OpenIMSDK/Open-IM-Server
 options:
+  tag_filter_pattern: '^v'
+  sort: "date"
+
   commits:
-    # filters:
-    #   Type:
-    #     - feat
-    #     - fix
-    #     - perf
-    #     - refactor
+    filters:
+      Type:
+        - feat
+        - fix
+        - perf
+        - refactor
+        - docs
+        - test
+        - chore
+        - ci
+        - build
+    sort_by: Scope
+
   commit_groups:
-    # title_maps:
-    #   feat: Features
-    #   fix: Bug Fixes
-    #   perf: Performance Improvements
-    #   refactor: Code Refactoring
+    group_by: Type
+    sort_by: Title
+    title_order:
+      - feat
+      - fix
+      - perf
+      - refactor
+      - docs
+      - test
+      - chore
+      - ci
+      - build
+    title_maps:
+      feat: Features
+
   header:
-    pattern: "^(\\w*)(?:\\(([\\w\\$\\.\\-\\*\\s]*)\\))?\\:\\s(.*)$"
+    pattern: "<regexp>"
     pattern_maps:
-      - Type
-      - Scope
-      - Subject
+      - PropName
+
+  issues:
+    prefix:
+      - #
+
+  refs:
+    actions:
+      - Closes
+      - Fixes
+
+  merges:
+    pattern: "^Merge branch '(\\w+)'$"
+    pattern_maps:
+      - Source
+
+  reverts:
+    pattern: "^Revert \"([\\s\\S]*)\"$"
+    pattern_maps:
+      - Header
+
   notes:
     keywords:
       - BREAKING CHANGE

CHANGELOG/CHANGELOG-0.0.0.md

@@ -1,228 +0,0 @@
-
-<a name="v2.3.3"></a>
-## [v2.3.3](https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.3.2...v2.3.3)
-
-> 2022-09-18
-
-
-<a name="v2.3.2"></a>
-## [v2.3.2](https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.3.0-rc2...v2.3.2)
-
-> 2022-09-09
-
-### GetSelfUserInfo
-
-* Handle the case where the user does not exist
-
-### Pull Requests
-
-* Merge pull request [#267](https://github.com/OpenIMSDK/Open-IM-Server/issues/267) from ouyangshi/del
-* Merge pull request [#265](https://github.com/OpenIMSDK/Open-IM-Server/issues/265) from ouyangshi/del
-* Merge pull request [#252](https://github.com/OpenIMSDK/Open-IM-Server/issues/252) from x-shadow-man/config-perf
-* Merge pull request [#263](https://github.com/OpenIMSDK/Open-IM-Server/issues/263) from ouyangshi/main
-* Merge pull request [#258](https://github.com/OpenIMSDK/Open-IM-Server/issues/258) from ouyangshi/main
-* Merge pull request [#261](https://github.com/OpenIMSDK/Open-IM-Server/issues/261) from ouyangshi/v2.3.0release
-
-
-<a name="v2.3.0-rc2"></a>
-## [v2.3.0-rc2](https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.3.0-rc1...v2.3.0-rc2)
-
-> 2022-07-29
-
-
-<a name="v2.3.0-rc1"></a>
-## [v2.3.0-rc1](https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.3.0-rc0...v2.3.0-rc1)
-
-> 2022-07-25
-
-
-<a name="v2.3.0-rc0"></a>
-## [v2.3.0-rc0](https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.2.0...v2.3.0-rc0)
-
-> 2022-07-15
-
-
-<a name="v2.2.0"></a>
-## [v2.2.0](https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.1.0...v2.2.0)
-
-> 2022-07-01
-
-
-<a name="v2.1.0"></a>
-## [v2.1.0](https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.0.10...v2.1.0)
-
-> 2022-06-17
-
-
-<a name="v2.0.10"></a>
-## [v2.0.10](https://github.com/OpenIMSDK/Open-IM-Server/compare/list...v2.0.10)
-
-> 2022-05-13
-
-
-<a name="list"></a>
-## [list](https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.0.9...list)
-
-> 2022-04-29
-
-
-<a name="v2.0.9"></a>
-## [v2.0.9](https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.0.7...v2.0.9)
-
-> 2022-04-29
-
-### Reverts
-
-* update etcd to v3.5.2 ([#206](https://github.com/OpenIMSDK/Open-IM-Server/issues/206))
-
-
-<a name="v2.0.7"></a>
-## [v2.0.7](https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.0.6...v2.0.7)
-
-> 2022-04-08
-
-
-<a name="v2.0.6"></a>
-## [v2.0.6](https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.0.5...v2.0.6)
-
-> 2022-04-01
-
-### Fix
-
-* json tag value of UserIDResult.UserID ([#178](https://github.com/OpenIMSDK/Open-IM-Server/issues/178))
-
-### Pull Requests
-
-* Merge pull request [#173](https://github.com/OpenIMSDK/Open-IM-Server/issues/173) from OpenIMSDK/tuoyun
-
-
-<a name="v2.0.5"></a>
-## [v2.0.5](https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.04...v2.0.5)
-
-> 2022-03-24
-
-
-<a name="v2.04"></a>
-## [v2.04](https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.0.3...v2.04)
-
-> 2022-03-18
-
-
-<a name="v2.0.3"></a>
-## [v2.0.3](https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.0.2...v2.0.3)
-
-> 2022-03-11
-
-
-<a name="v2.0.2"></a>
-## [v2.0.2](https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.0.1...v2.0.2)
-
-> 2022-03-04
-
-### Version
-
-* "3"
-* "2"
-
-
-<a name="v2.0.1"></a>
-## [v2.0.1](https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.0.0...v2.0.1)
-
-> 2022-02-25
-
-### DbMysqlDatabaseName
-
-* openIM_v2
-
-
-<a name="v2.0.0"></a>
-## [v2.0.0](https://github.com/OpenIMSDK/Open-IM-Server/compare/v1.0.7...v2.0.0)
-
-> 2022-02-23
-
-### Pb
-
-* open_im_sdk.OfflinePushInfo
-
-### Pull Requests
-
-* Merge pull request [#131](https://github.com/OpenIMSDK/Open-IM-Server/issues/131) from OpenIMSDK/cms-dev
-
-
-<a name="v1.0.7"></a>
-## [v1.0.7](https://github.com/OpenIMSDK/Open-IM-Server/compare/v1.0.6...v1.0.7)
-
-> 2021-12-17
-
-
-<a name="v1.0.6"></a>
-## [v1.0.6](https://github.com/OpenIMSDK/Open-IM-Server/compare/v1.0.5...v1.0.6)
-
-> 2021-12-10
-
-### Pb
-
-* open_im_sdk.OfflinePushInfo
-
-
-<a name="v1.0.5"></a>
-## [v1.0.5](https://github.com/OpenIMSDK/Open-IM-Server/compare/v1.0.4...v1.0.5)
-
-> 2021-12-03
-
-
-<a name="v1.0.4"></a>
-## [v1.0.4](https://github.com/OpenIMSDK/Open-IM-Server/compare/v1.0.3...v1.0.4)
-
-> 2021-11-25
-
-
-<a name="v1.0.3"></a>
-## [v1.0.3](https://github.com/OpenIMSDK/Open-IM-Server/compare/v1.0.1...v1.0.3)
-
-> 2021-11-12
-
-### Feat
-
-* test utils ([#26](https://github.com/OpenIMSDK/Open-IM-Server/issues/26))
-
-### Fix
-
-* Startup error ([#11](https://github.com/OpenIMSDK/Open-IM-Server/issues/11))
-
-### Pull Requests
-
-* Merge pull request [#12](https://github.com/OpenIMSDK/Open-IM-Server/issues/12) from njulk/main
-* Merge pull request [#9](https://github.com/OpenIMSDK/Open-IM-Server/issues/9) from xmcy0011/dev
-* Merge pull request [#6](https://github.com/OpenIMSDK/Open-IM-Server/issues/6) from Bloomingg/int
-
-
-<a name="v1.0.1"></a>
-## [v1.0.1](https://github.com/OpenIMSDK/Open-IM-Server/compare/v1.0.0...v1.0.1)
-
-> 2021-11-04
-
-
-<a name="v1.0.0"></a>
-## v1.0.0
-
-> 2021-10-28
-
-### Ci
-
-* ignore files created by docker-compose ([#19](https://github.com/OpenIMSDK/Open-IM-Server/issues/19))
-
-### Feat
-
-* optimise get server ip ([#20](https://github.com/OpenIMSDK/Open-IM-Server/issues/20))
-
-### Reverts
-
-* friend modify
-* update
-
-### Pull Requests
-
-* Merge pull request [#7](https://github.com/OpenIMSDK/Open-IM-Server/issues/7) from memory-qianxiao/docker-compose_update
-* Merge pull request [#4](https://github.com/OpenIMSDK/Open-IM-Server/issues/4) from wujingke/patch-1
-

CHANGELOG/CHANGELOG-1.0.md

@@ -0,0 +1,56 @@
+# Version logging for OpenIM
+
+> **Note**:
+> Deprecated version logging for OpenIM, please refer to [CHANGELOG.md](../CHANGELOG.md)
+
+<!-- BEGIN MUNGE: GENERATED_TOC -->
+
+- [Version logging for OpenIM](#version-logging-for-openim)
+  - [Unreleased](#unreleased)
+  - [v1.0.7 - 2021-12-17](#v107---2021-12-17)
+  - [v1.0.6 - 2021-12-10](#v106---2021-12-10)
+  - [v1.0.5 - 2021-12-03](#v105---2021-12-03)
+  - [v1.0.4 - 2021-11-25](#v104---2021-11-25)
+  - [v1.0.3 - 2021-11-12](#v103---2021-11-12)
+  - [v1.0.1 - 2021-11-04](#v101---2021-11-04)
+  - [v1.0.0 - 2021-10-28](#v100---2021-10-28)
+    - [Reverts](#reverts)
+
+<!-- END MUNGE: GENERATED_TOC -->
+
+<a name="unreleased"></a>
+## [Unreleased]
+
+
+<a name="v1.0.7"></a>
+## [v1.0.7] - 2021-12-17
+
+<a name="v1.0.6"></a>
+## [v1.0.6] - 2021-12-10
+
+<a name="v1.0.5"></a>
+## [v1.0.5] - 2021-12-03
+
+<a name="v1.0.4"></a>
+## [v1.0.4] - 2021-11-25
+
+<a name="v1.0.3"></a>
+## [v1.0.3] - 2021-11-12
+
+<a name="v1.0.1"></a>
+## [v1.0.1] - 2021-11-04
+
+<a name="v1.0.0"></a>
+## v1.0.0 - 2021-10-28
+### Reverts
+- friend modify
+- update
+
+
+[Unreleased]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v1.0.7...HEAD
+[v1.0.7]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v1.0.6...v1.0.7
+[v1.0.6]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v1.0.5...v1.0.6
+[v1.0.5]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v1.0.4...v1.0.5
+[v1.0.4]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v1.0.3...v1.0.4
+[v1.0.3]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v1.0.1...v1.0.3
+[v1.0.1]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v1.0.0...v1.0.1

CHANGELOG/CHANGELOG-2.0.md

@@ -0,0 +1,121 @@
+# Version logging for OpenIM:v2.0
+
+> **Note**:
+> Deprecated version logging for OpenIM, please refer to [CHANGELOG.md](../CHANGELOG.md)
+
+<!-- BEGIN MUNGE: GENERATED_TOC -->
+
+- [Version logging for OpenIM:v2.0](#version-logging-for-openimv20)
+  - [\[Unreleased\]](#unreleased)
+  - [\[v2.0.10\] - 2022-05-13](#v2010---2022-05-13)
+  - [\[v2.0.9\] - 2022-04-29](#v209---2022-04-29)
+    - [Reverts](#reverts)
+    - [Pull Requests](#pull-requests)
+  - [\[v2.0.8\] - 2022-04-24](#v208---2022-04-24)
+    - [Pull Requests](#pull-requests-1)
+  - [\[v2.0.7\] - 2022-04-08](#v207---2022-04-08)
+    - [Pull Requests](#pull-requests-2)
+  - [\[v2.0.6\] - 2022-04-01](#v206---2022-04-01)
+    - [Pull Requests](#pull-requests-3)
+  - [\[v2.0.5\] - 2022-03-24](#v205---2022-03-24)
+  - [\[v2.04\] - 2022-03-18](#v204---2022-03-18)
+  - [\[v2.0.3\] - 2022-03-11](#v203---2022-03-11)
+  - [\[v2.0.2\] - 2022-03-04](#v202---2022-03-04)
+    - [Pull Requests](#pull-requests-4)
+  - [\[v2.0.1\] - 2022-02-25](#v201---2022-02-25)
+  - [v2.0.0 - 2022-02-23](#v200---2022-02-23)
+    - [Reverts](#reverts-1)
+
+<!-- END MUNGE: GENERATED_TOC -->
+
+
+<a name="unreleased"></a>
+
+## [Unreleased]
+
+
+<a name="v2.0.10"></a>
+
+## [v2.0.10] - 2022-05-13
+
+<a name="v2.0.9"></a>
+
+## [v2.0.9] - 2022-04-29
+
+### Reverts
+
+- update etcd to v3.5.2 ([#206](https://github.com/OpenIMSDK/Open-IM-Server/issues/206))
+
+### Pull Requests
+
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+
+
+<a name="v2.0.8"></a>
+
+## [v2.0.8] - 2022-04-24
+
+### Pull Requests
+
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+
+
+<a name="v2.0.7"></a>
+
+## [v2.0.7] - 2022-04-08
+
+### Pull Requests
+
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+
+
+<a name="v2.0.6"></a>
+
+## [v2.0.6] - 2022-04-01
+
+### Pull Requests
+
+- Merge branch 'tuoyun'
+
+
+<a name="v2.0.5"></a>
+
+## [v2.0.5] - 2022-03-24
+
+<a name="v2.04"></a>
+
+## [v2.04] - 2022-03-18
+
+<a name="v2.0.3"></a>
+
+## [v2.0.3] - 2022-03-11
+
+<a name="v2.0.2"></a>
+
+## [v2.0.2] - 2022-03-04
+
+### Pull Requests
+
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+
+
+<a name="v2.0.1"></a>
+
+## [v2.0.1] - 2022-02-25
+
+<a name="v2.0.0"></a>
+
+## v2.0.0 - 2022-02-23
+
+### Reverts

CHANGELOG/CHANGELOG-2.1.md

@@ -0,0 +1,50 @@
+# Version logging for OpenIM:v2.1
+
+> **Note**:
+> Deprecated version logging for OpenIM, please refer to [CHANGELOG.md](../CHANGELOG.md)
+
+<!-- BEGIN MUNGE: GENERATED_TOC -->
+
+- [Version logging for OpenIM:v2.1](#version-logging-for-openimv21)
+  - [Unreleased](#unreleased)
+  - [v2.1.0 - 2022-06-17](#v210---2022-06-17)
+    - [Reverts](#reverts)
+    - [Pull Requests](#pull-requests)
+
+
+<!-- END MUNGE: GENERATED_TOC -->
+
+<a name="unreleased"></a>
+## [Unreleased]
+
+
+<a name="v2.1.0"></a>
+## v2.1.0 - 2022-06-17
+### Reverts
+- update etcd to v3.5.2 ([#206](https://github.com/OpenIMSDK/Open-IM-Server/issues/206))
+- friend modify
+- update
+
+### Pull Requests
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+
+
+[Unreleased]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.1.0...HEAD

CHANGELOG/CHANGELOG-2.2.md

@@ -0,0 +1,50 @@
+# Version logging for OpenIM:v2.2
+
+> **Note**:
+> Deprecated version logging for OpenIM, please refer to [CHANGELOG.md](../CHANGELOG.md)
+
+<!-- BEGIN MUNGE: GENERATED_TOC -->
+
+- [Version logging for OpenIM:v2.2](#version-logging-for-openimv22)
+  - [Unreleased](#unreleased)
+  - [v2.2.0 - 2022-07-01](#v220---2022-07-01)
+    - [Reverts](#reverts)
+    - [Pull Requests](#pull-requests)
+
+
+<!-- END MUNGE: GENERATED_TOC -->
+
+<a name="unreleased"></a>
+## [Unreleased]
+
+
+<a name="v2.2.0"></a>
+## v2.2.0 - 2022-07-01
+### Reverts
+- update etcd to v3.5.2 ([#206](https://github.com/OpenIMSDK/Open-IM-Server/issues/206))
+- friend modify
+- update
+
+### Pull Requests
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+
+
+[Unreleased]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.2.0...HEAD

CHANGELOG/CHANGELOG-2.3.md

@@ -0,0 +1,70 @@
+# Version logging for OpenIM:v2.3
+
+> **Note**:
+> Deprecated version logging for OpenIM, please refer to [CHANGELOG.md](../CHANGELOG.md)
+
+<!-- BEGIN MUNGE: GENERATED_TOC -->
+
+- [Version logging for OpenIM:v2.3](#version-logging-for-openimv23)
+  - [Unreleased](#unreleased)
+  - [v2.3.3 - 2022-09-18](#v233---2022-09-18)
+  - [v2.3.2 - 2022-09-09](#v232---2022-09-09)
+  - [v2.3.0-rc2 - 2022-07-29](#v230-rc2---2022-07-29)
+  - [v2.3.0-rc1 - 2022-07-25](#v230-rc1---2022-07-25)
+  - [v2.3.0-rc0 - 2022-07-15](#v230-rc0---2022-07-15)
+    - [Reverts](#reverts)
+    - [Pull Requests](#pull-requests)
+
+
+<!-- END MUNGE: GENERATED_TOC -->
+
+<a name="unreleased"></a>
+## [Unreleased]
+
+
+<a name="v2.3.3"></a>
+## [v2.3.3] - 2022-09-18
+
+<a name="v2.3.2"></a>
+## [v2.3.2] - 2022-09-09
+
+<a name="v2.3.0-rc2"></a>
+## [v2.3.0-rc2] - 2022-07-29
+
+<a name="v2.3.0-rc1"></a>
+## [v2.3.0-rc1] - 2022-07-25
+
+<a name="v2.3.0-rc0"></a>
+## v2.3.0-rc0 - 2022-07-15
+### Reverts
+- update etcd to v3.5.2 ([#206](https://github.com/OpenIMSDK/Open-IM-Server/issues/206))
+- friend modify
+- update
+
+### Pull Requests
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+
+
+[Unreleased]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.3.3...HEAD
+[v2.3.3]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.3.2...v2.3.3
+[v2.3.2]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.3.0-rc2...v2.3.2
+[v2.3.0-rc2]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.3.0-rc1...v2.3.0-rc2
+[v2.3.0-rc1]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.3.0-rc0...v2.3.0-rc1

CHANGELOG/CHANGELOG-2.9.md

@@ -0,0 +1,52 @@
+# Version logging for OpenIM
+
+<!-- BEGIN MUNGE: GENERATED_TOC -->
+
+- [Version logging for OpenIM](#version-logging-for-openim)
+  - [Unreleased](#unreleased)
+  - [v2.9.0+1.839643f - 2023-07-07](#v2901839643f---2023-07-07)
+  - [v2.9.0+2.35f07fe - 2023-07-06](#v290235f07fe---2023-07-06)
+  - [v2.9.0+1.b5072b1 - 2023-07-05](#v2901b5072b1---2023-07-05)
+  - [v2.9.0+3.2667a3a - 2023-07-05](#v29032667a3a---2023-07-05)
+  - [v2.9.0+7.04818ca - 2023-07-05](#v290704818ca---2023-07-05)
+  - [v2.9.0 - 2023-07-04](#v290---2023-07-04)
+    - [Reverts](#reverts)
+    - [Pull Requests](#pull-requests)
+
+
+<!-- END MUNGE: GENERATED_TOC -->
+
+<a name="unreleased"></a>
+## [Unreleased]
+
+
+<a name="v2.9.0+1.839643f"></a>
+## [v2.9.0+1.839643f] - 2023-07-07
+
+<a name="v2.9.0+2.35f07fe"></a>
+## [v2.9.0+2.35f07fe] - 2023-07-06
+
+<a name="v2.9.0+1.b5072b1"></a>
+## [v2.9.0+1.b5072b1] - 2023-07-05
+
+<a name="v2.9.0+3.2667a3a"></a>
+## [v2.9.0+3.2667a3a] - 2023-07-05
+
+<a name="v2.9.0+7.04818ca"></a>
+## [v2.9.0+7.04818ca] - 2023-07-05
+
+<a name="v2.9.0"></a>
+## v2.9.0 - 2023-07-04
+### Reverts
+- update etcd to v3.5.2 ([#206](https://github.com/OpenIMSDK/Open-IM-Server/issues/206))
+
+### Pull Requests
+- Merge branch 'tuoyun'
+
+
+[Unreleased]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.9.0+1.839643f...HEAD
+[v2.9.0+1.839643f]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.9.0+2.35f07fe...v2.9.0+1.839643f
+[v2.9.0+2.35f07fe]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.9.0+1.b5072b1...v2.9.0+2.35f07fe
+[v2.9.0+1.b5072b1]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.9.0+3.2667a3a...v2.9.0+1.b5072b1
+[v2.9.0+3.2667a3a]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.9.0+7.04818ca...v2.9.0+3.2667a3a
+[v2.9.0+7.04818ca]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.9.0...v2.9.0+7.04818ca

CHANGELOG/CHANGELOG-3.0.md

@@ -0,0 +1,188 @@
+# Version logging for OpenIM
+
+<!-- BEGIN MUNGE: GENERATED_TOC -->
+- [Version logging for OpenIM](#version-logging-for-openim)
+  - [Unreleased](#unreleased)
+  - [v2.9.0 - 2023-07-04](#v290---2023-07-04)
+    - [Reverts](#reverts)
+    - [Pull Requests](#pull-requests)
+  - [v2.3.3 - 2022-09-18](#v233---2022-09-18)
+  - [v2.3.2 - 2022-09-09](#v232---2022-09-09)
+  - [v2.3.0-rc2 - 2022-07-29](#v230-rc2---2022-07-29)
+  - [v2.3.0-rc1 - 2022-07-25](#v230-rc1---2022-07-25)
+  - [v2.3.0-rc0 - 2022-07-15](#v230-rc0---2022-07-15)
+  - [v2.2.0 - 2022-07-01](#v220---2022-07-01)
+  - [v2.1.0 - 2022-06-17](#v210---2022-06-17)
+    - [Pull Requests](#pull-requests-1)
+  - [v2.0.10 - 2022-05-13](#v2010---2022-05-13)
+  - [v2.0.9 - 2022-04-29](#v209---2022-04-29)
+    - [Reverts](#reverts-1)
+    - [Pull Requests](#pull-requests-2)
+  - [v2.0.7 - 2022-04-08](#v207---2022-04-08)
+    - [Pull Requests](#pull-requests-3)
+  - [v2.0.6 - 2022-04-01](#v206---2022-04-01)
+    - [Pull Requests](#pull-requests-4)
+  - [v2.0.5 - 2022-03-24](#v205---2022-03-24)
+  - [v2.04 - 2022-03-18](#v204---2022-03-18)
+  - [v2.0.3 - 2022-03-11](#v203---2022-03-11)
+  - [v2.0.2 - 2022-03-04](#v202---2022-03-04)
+    - [Pull Requests](#pull-requests-5)
+  - [v2.0.1 - 2022-02-25](#v201---2022-02-25)
+  - [v2.0.0 - 2022-02-23](#v200---2022-02-23)
+  - [v1.0.7 - 2021-12-17](#v107---2021-12-17)
+  - [v1.0.6 - 2021-12-10](#v106---2021-12-10)
+  - [v1.0.5 - 2021-12-03](#v105---2021-12-03)
+  - [v1.0.4 - 2021-11-25](#v104---2021-11-25)
+  - [v1.0.3 - 2021-11-12](#v103---2021-11-12)
+  - [v1.0.1 - 2021-11-04](#v101---2021-11-04)
+  - [v1.0.0 - 2021-10-28](#v100---2021-10-28)
+    - [Reverts](#reverts-2)
+
+<!-- END MUNGE: GENERATED_TOC -->
+
+<a name="unreleased"></a>
+## [Unreleased]
+
+
+<a name="v2.9.0"></a>
+## [v2.9.0] - 2023-07-04
+### Reverts
+- update etcd to v3.5.2 ([#206](https://github.com/OpenIMSDK/Open-IM-Server/issues/206))
+
+### Pull Requests
+- Merge branch 'tuoyun'
+
+
+<a name="v2.3.3"></a>
+## [v2.3.3] - 2022-09-18
+
+<a name="v2.3.2"></a>
+## [v2.3.2] - 2022-09-09
+
+<a name="v2.3.0-rc2"></a>
+## [v2.3.0-rc2] - 2022-07-29
+
+<a name="v2.3.0-rc1"></a>
+## [v2.3.0-rc1] - 2022-07-25
+
+<a name="v2.3.0-rc0"></a>
+## [v2.3.0-rc0] - 2022-07-15
+
+<a name="v2.2.0"></a>
+## [v2.2.0] - 2022-07-01
+
+<a name="v2.1.0"></a>
+## [v2.1.0] - 2022-06-17
+### Pull Requests
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+
+
+<a name="v2.0.10"></a>
+## [v2.0.10] - 2022-05-13
+
+<a name="v2.0.9"></a>
+## [v2.0.9] - 2022-04-29
+### Reverts
+- update etcd to v3.5.2 ([#206](https://github.com/OpenIMSDK/Open-IM-Server/issues/206))
+
+### Pull Requests
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+
+
+<a name="v2.0.7"></a>
+## [v2.0.7] - 2022-04-08
+### Pull Requests
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+
+
+<a name="v2.0.6"></a>
+## [v2.0.6] - 2022-04-01
+### Pull Requests
+- Merge branch 'tuoyun'
+
+
+<a name="v2.0.5"></a>
+## [v2.0.5] - 2022-03-24
+
+<a name="v2.04"></a>
+## [v2.04] - 2022-03-18
+
+<a name="v2.0.3"></a>
+## [v2.0.3] - 2022-03-11
+
+<a name="v2.0.2"></a>
+## [v2.0.2] - 2022-03-04
+### Pull Requests
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+- Merge branch 'tuoyun'
+
+
+<a name="v2.0.1"></a>
+## [v2.0.1] - 2022-02-25
+
+<a name="v2.0.0"></a>
+## [v2.0.0] - 2022-02-23
+
+<a name="v1.0.7"></a>
+## [v1.0.7] - 2021-12-17
+
+<a name="v1.0.6"></a>
+## [v1.0.6] - 2021-12-10
+
+<a name="v1.0.5"></a>
+## [v1.0.5] - 2021-12-03
+
+<a name="v1.0.4"></a>
+## [v1.0.4] - 2021-11-25
+
+<a name="v1.0.3"></a>
+## [v1.0.3] - 2021-11-12
+
+<a name="v1.0.1"></a>
+## [v1.0.1] - 2021-11-04
+
+<a name="v1.0.0"></a>
+## v1.0.0 - 2021-10-28
+### Reverts
+- friend modify
+- update
+
+
+[Unreleased]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.9.0...HEAD
+[v2.9.0]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.3.3...v2.9.0
+[v2.3.3]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.3.2...v2.3.3
+[v2.3.2]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.3.0-rc2...v2.3.2
+[v2.3.0-rc2]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.3.0-rc1...v2.3.0-rc2
+[v2.3.0-rc1]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.3.0-rc0...v2.3.0-rc1
+[v2.3.0-rc0]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.2.0...v2.3.0-rc0
+[v2.2.0]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.1.0...v2.2.0
+[v2.1.0]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.0.10...v2.1.0
+[v2.0.10]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.0.9...v2.0.10
+[v2.0.9]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.0.7...v2.0.9
+[v2.0.7]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.0.6...v2.0.7
+[v2.0.6]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.0.5...v2.0.6
+[v2.0.5]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.04...v2.0.5
+[v2.04]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.0.3...v2.04
+[v2.0.3]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.0.2...v2.0.3
+[v2.0.2]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.0.1...v2.0.2
+[v2.0.1]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v2.0.0...v2.0.1
+[v2.0.0]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v1.0.7...v2.0.0
+[v1.0.7]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v1.0.6...v1.0.7
+[v1.0.6]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v1.0.5...v1.0.6
+[v1.0.5]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v1.0.4...v1.0.5
+[v1.0.4]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v1.0.3...v1.0.4
+[v1.0.3]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v1.0.1...v1.0.3
+[v1.0.1]: https://github.com/OpenIMSDK/Open-IM-Server/compare/v1.0.0...v1.0.1

CHANGELOG/CHANGELOG.md

@@ -1,3 +1,109 @@
 # Changelog
 
-All notable changes to this project will be documented in this file.
+- [Changelog](#changelog)
+  - [OpenIM versioning policy](#openim-versioning-policy)
+  - [command](#command)
+  - [create next tag](#create-next-tag)
+  - [Release version logs](#release-version-logs)
+  - [Introduction](#introduction)
+  - [Naming Format](#naming-format)
+  - [Examples](#examples)
+  - [Version Modifiers](#version-modifiers)
+  - [Versioning Strategy](#versioning-strategy)
+
+
+All notable changes to this project will be documented in this file.
+
++ [https://github.com/OpenIMSDK/Open-IM-Server/releases](https://github.com/OpenIMSDK/Open-IM-Server/releases)
+
+## OpenIM versioning policy
+
++ [OpenIM Version](../docs/conversions/version.md)
+
+## command
+
+```bash
+git-chglog --tag-filter-pattern 'v2.0.*'  -o CHANGELOG-2.0.md
+```
+
+## create next tag
+
+```bash
+git-chglog --next-tag 2.0.0 -o CHANGELOG.md
+git commit -am "release 2.0.0"
+git tag 2.0.0
+```
+
+| Query          | Description                                    | Example                     |
+| -------------- | ---------------------------------------------- | --------------------------- |
+| `<old>..<new>` | Commit contained in `<new>` tags from `<old>`. | `$ git-chglog 1.0.0..2.0.0` |
+| `<name>..`     | Commit from the `<name>` to the latest tag.    | `$ git-chglog 1.0.0..`      |
+| `..<name>`     | Commit from the oldest tag to `<name>`.        | `$ git-chglog ..2.0.0`      |
+| `<name>`       | Commit contained in `<name>`.                  | `$ git-chglog 1.0.0`        |
+
+
+## Release version logs
+
++ [OpenIM CHANGELOG-V1.0](CHANGELOG-1.0.md)
++ [OpenIM CHANGELOG-V2.0](CHANGELOG-2.0.md)
++ [OpenIM CHANGELOG-V2.1](CHANGELOG-2.1.md)
++ [OpenIM CHANGELOG-V2.2](CHANGELOG-2.2.md)
++ [OpenIM CHANGELOG-V2.3](CHANGELOG-2.3.md)
++ [OpenIM CHANGELOG-V2.9](CHANGELOG-2.9.md)
++ [OpenIM CHANGELOG-V3.0](CHANGELOG-3.0.md)
+
+## Introduction
+
+In both the open-source and closed-source software development communities, it is important to follow a consistent and understandable versioning scheme for software projects. This ensures clear communication of changes, compatibility, and stability across different releases. One widely adopted naming convention is the Semantic Versioning 2.0.0.
+
+## Naming Format
+
+The most common format for version numbers is as follows:
+
+```
+major.minor[.patch[.build]]
+```
+
+Let's take a closer look at each component:
+
+1. **Major Version**: This is the first number in the versioning scheme and indicates significant changes that may not be backward compatible (specific to each project).
+2. **Minor Version**: The second number signifies the addition of new features while maintaining backward compatibility.
+3. **Patch Version**: The third number represents bug fixes or code optimizations without introducing new features. It is generally backward compatible.
+4. **Build Version**: Typically an automatically generated number that increments with each code commit.
+
+## Examples
+
+Here are a few examples to illustrate the versioning scheme:
+
+1. `1.0`
+2. `2.14.0.1478`
+3. `3.2.1 build-354`
+
+## Version Modifiers
+
+Apart from the version numbers, there are also version modifiers used to indicate specific stages or statuses of a release. Some commonly used version modifiers include:
+
+- **alpha**: An internal testing version with numerous known bugs. It is primarily used for communication among developers.
+- **beta**: A testing version released to enthusiastic users for feedback and bug detection.
+- **rc (release candidate)**: The final testing version before the official release.
+- **ga (general availability)**: The initial stable release for public distribution.
+- **r/release** (or no modifier at all): The final released version intended for general users.
+- **lts (long-term support)**: Designates a version that will receive extended maintenance and bug fixes for a specified number of years.
+
+## Versioning Strategy
+
+To effectively manage version numbers, the following strategies are commonly employed:
+
+- The initial version of a project can be either `0.1` or `1.0`.
+- When fixing bugs, the patch version is incremented by 1.
+- When adding new features, the minor version is incremented by 1, and the patch version is reset to 0.
+- In the case of significant modifications, the major version is incremented by 1.
+- The build version is usually automatically generated by the compilation process and follows a defined format. It does not require manual control.
+
+By adhering to these strategies and guidelines, developers can maintain consistency and clarity in versioning their software projects. This enables users and collaborators to understand the nature of changes between different releases and ensure compatibility with their systems.
+
+(Note: Markdown formatting has been used to structure this article. Markdown is a lightweight markup language used to format text on platforms like GitHub.)
+
+------
+
+**Note**: The above article is based on the given content and aims to provide a Markdown-formatted English article explaining the naming conventions for software project versions, specifically focusing on the Semantic Versioning 2.0.0.

CONTRIBUTING.md

@@ -8,13 +8,23 @@ This document provides guidelines and best practices to help you contribute effe
 
 ## 📇Topics
 
-- [What we expect of you](#What-we-expect-of-you)
-- [Code of Conduct](#Code-of-Conduct)
-- [Getting Started](#Getting-Started)
-- [Style and Specification](#Style-and-Specification)
-- [Engage to help anything](#Engage-to-help-anything)
-- [Release version](#Release-version)
-- [Contact Us](#Contact-Us)
+- [Contributing to Open-IM-Server](#contributing-to-open-im-server)
+  - [📇Topics](#topics)
+  - [What we expect of you](#what-we-expect-of-you)
+  - [Code of ConductCode of Conduct](#code-of-conductcode-of-conduct)
+      - [Code and doc contribution](#code-and-doc-contribution)
+      - [Where should I start?](#where-should-i-start)
+      - [Design documents](#design-documents)
+  - [Getting Started](#getting-started)
+  - [Style and Specification](#style-and-specification)
+      - [Reporting security issues](#reporting-security-issues)
+      - [Reporting general issues](#reporting-general-issues)
+      - [Commit Rules](#commit-rules)
+      - [PR Description](#pr-description)
+      - [Docs Contribution](#docs-contribution)
+  - [Engage to help anything](#engage-to-help-anything)
+  - [Release version](#release-version)
+  - [Contact Us](#contact-us)
 
 ## What we expect of you
 
@@ -32,7 +42,7 @@ The [Makefile](./Makefile) is for every developer, even if you don't know how to
 
 #### Code and doc contribution
 
-Every action to make project Open-IM-Server better is encouraged. On GitHub, every improvement for Open-IM-Server could be via a [PR](https://github.com/Open-IM-Server/pulls) (short for pull request).
+Every action to make project Open-IM-Server better is encouraged. On GitHub, every improvement for Open-IM-Server could be via a [PR](https://github.com/OpenIMSDK/Open-IM-Server/pulls) (short for pull request).
 
 + If you find a typo, try to fix it!
 + If you find a bug, try to fix it!
@@ -48,7 +58,7 @@ Every action to make project Open-IM-Server better is encouraged. On GitHub, eve
 #### Where should I start?
 
 + If you are new to the project, don't know how to contribute Open-IM-Server, please check out the [good first issue](https://github.com/OpenIMSDK/Open-IM-Server/issues?q=is%3Aopen+label%3A"good+first+issue"+sort%3Aupdated-desc) label.
-+ You should be good at filtering the Open-IM-Server issue tags and finding the ones you like, such as [RFC](https://github.com/OpenIMSDK/Open-IM-Server/issues?q=is%3Aissue+is%3Aopen+RFC+label%3ARFC) for big initiatives, features for [feature](https://github.com/OpenIMSDK/Open-IM-Server/issues?q=is%3Aissue+label%3Afeature) proposals, and [bug](https://github.com/{github/issues?q=is%3Aissue+label%3Abug+) fixes.
++ You should be good at filtering the Open-IM-Server issue tags and finding the ones you like, such as [RFC](https://github.com/OpenIMSDK/Open-IM-Server/issues?q=is%3Aissue+is%3Aopen+RFC+label%3ARFC) for big initiatives, features for [feature](https://github.com/OpenIMSDK/Open-IM-Server/issues?q=is%3Aissue+label%3Afeature) proposals, and [bug](https://github.com/OpenIMSDK/Open-IM-Server/issues?q=is%3Aissue+label%3Abug+) fixes.
 + If you are looking for something to work on, check out our [open issues](https://github.com/OpenIMSDK/Open-IM-Server/issues?q=is%3Aissue+is%3Aopen+sort%3Aupdated-desc).
 + If you have an idea for a new feature, please [open an issue](https://github.com/OpenIMSDK/Open-IM-Server/issues/new/choose), and we can discuss it.
 
@@ -79,7 +89,7 @@ To propose PR for the Open-IM-Server item, we assume you have registered a GitHu
 
 1. Fork the repository(Open-IM-Server)
 
-2. **CLONE** your own repository to master locally. Use `git clone https://github.com/<your-username>/Open-IM-Server.git` to clone repository to your local machine. Then you can create new branches to finish the change you wish to make.
+2. **CLONE** your own repository to main locally. Use `git clone https://github.com/<your-username>/Open-IM-Server.git` to clone repository to your local machine. Then you can create new branches to finish the change you wish to make.
 
 3. **Set Remote** upstream to be `https://github.com/OpenIMSDK/Open-IM-Server.git` using the following two commands:
 
@@ -120,7 +130,7 @@ To propose PR for the Open-IM-Server item, we assume you have registered a GitHu
 
    ```bash
    ❯ git rebase upstream/main
-   ❯ make link	  # golangci-lint run -c .golangci.yml
+   ❯ make lint	  # golangci-lint run -c .golangci.yml
    ❯ git add -A  # add changes to staging
    ❯ git commit -a -s -m "message for your changes" # -s adds a Signed-off-by trailer
    ```
@@ -180,7 +190,7 @@ To be honest, we regard every user of Open-IM-Serveras a very kind contributor.
 
 Since we collaborate project Open-IM-Server in a distributed way, we appreciate **WELL-WRITTEN**, **DETAILED**, **EXPLICIT** issue reports. To make the communication more efficient, we wish everyone could search if your issue is an existing one in the searching list. If you find it existing, please add your details in comments under the existing issue instead of opening a brand new one.
 
-To make the issue details as standard as possible, we setup an [ISSUE TEMPLATE](https://github.com/OpenIMSDK/Open-IM-Server/tree/main/.github/ISSUE_TEMPLATE) for issue reporters. You can find three kinds of issue templates there: question, bug report and feature request. Please **BE SURE** to follow the instructions to fill fields in template.
+To make the issue details as standard as possible, we setup an [ISSUE TEMPLATE](https://github.com/OpenIMSDK/.github/tree/main/.github/ISSUE_TEMPLATE) for issue reporters. You can find three kinds of issue templates there: question, bug report and feature request. Please **BE SURE** to follow the instructions to fill fields in template.
 
 **There are a lot of cases when you could open an issue:**
 
@@ -242,7 +252,7 @@ An example for this could be:
 
 #### PR Description
 
-PR is the only way to make change to Open-IM-Server project files. To help reviewers better get your purpose, PR description could not be too detailed. We encourage contributors to follow the [PR template](https://github.com/OpenIMSDK/Open-IM-Server/tree/main/.github/PULL_REQUEST_TEMPLATE.md) to finish the pull request.
+PR is the only way to make change to Open-IM-Server project files. To help reviewers better get your purpose, PR description could not be too detailed. We encourage contributors to follow the [PR template](https://github.com/OpenIMSDK/.github/tree/main/.github/PULL_REQUEST_TEMPLATE.md) to finish the pull request.
 
 You can find some very formal PR in [RFC](https://github.com/OpenIMSDK/Open-IM-Server/issues?q=is%3Aissue+is%3Aopen+RFC+label%3ARFC) issues and learn about them.
 
@@ -295,7 +305,6 @@ The documentation for Open-IM-Server includes:
 
 + [README.md](https://github.com/OpenIMSDK/Open-IM-Server/blob/main/README.md): This file includes the basic information and instructions for getting started with Open-IM-Server.
 + [CONTRIBUTING.md](https://github.com/OpenIMSDK/Open-IM-Server/blob/main/CONTRIBUTING.md): This file contains guidelines for contributing to Open-IM-Server's codebase, such as how to submit issues, pull requests, and code reviews.
-+ [DEVELOPGUIDE.md](https://github.com/OpenIMSDK/Open-IM-Server/blob/main/DEVELOPGUIDE.md): This file provides a more in-depth guide to developing Open-IM-Server, including information on the project's architecture, coding conventions, and testing practices.
 + [Official Documentation](https://doc.rentsoft.cn/): This is the official documentation for Open-IM-Server, which includes comprehensive information on all of its features, configuration options, and troubleshooting tips.
 
 Please obey the following rules to better format the docs, which would greatly improve the reading experience.
@@ -315,7 +324,7 @@ We choose GitHub as the primary place for Open-IM-Server to collaborate. So the
 + help solve other user's problems;
 + help review other's [PR](https://github.com/OpenIMSDK/Open-IM-Server/pulls?q=is%3Apr+is%3Aopen+sort%3Aupdated-desc) design; 
 + discuss about Open-IM-Server to make things clearer;
-+ advocate [Open-IM-Server](google.com/search?q=Open-IM-Server) technology beyond GitHub;
++ advocate [Open-IM-Server](https://google.com/search?q=Open-IM-Server) technology beyond GitHub;
 + write blogs on Open-IM-Server and so on.
 
 In a word, **ANY HELP IS CONTRIBUTION.**

Dockerfile

@@ -1,39 +1,37 @@
-FROM golang as build
+# Build Stage
+FROM golang:1.20 AS builder
 
-# go mod Installation source, container environment variable addition will override the default variable value
-ENV GO111MODULE=on
-ENV GOPROXY=https://goproxy.cn,direct
+LABEL org.opencontainers.image.source=https://github.com/OpenIMSDK/Open-IM-Server
+LABEL org.opencontainers.image.description="OpenIM Server image"
+LABEL org.opencontainers.image.licenses="Apache 2.0"
+
+# Set go mod installation source and proxy
+ARG GO111MODULE=on
+ARG GOPROXY=https://goproxy.cn,direct
+ENV GO111MODULE=$GO111MODULE
+ENV GOPROXY=$GOPROXY
 
 # Set up the working directory
 WORKDIR /Open-IM-Server
-# add all files to the container
-COPY . .
 
-WORKDIR /Open-IM-Server/scripts
-RUN chmod +x *.sh
+# Copy all files to the container
+ADD . .
 
-RUN /bin/sh -c ./build_all_service.sh
+RUN /bin/sh -c "make build"
 
-#Blank image Multi-Stage Build
-FROM ubuntu
+# Production Stage
+FROM alpine
 
-RUN rm -rf /var/lib/apt/lists/*
-RUN apt-get update && apt-get install apt-transport-https && apt-get install procps\
-&&apt-get install net-tools
-#Non-interactive operation
-ENV DEBIAN_FRONTEND=noninteractive
-RUN apt-get install -y vim curl tzdata gawk
-#Time zone adjusted to East eighth District
-RUN ln -fs /usr/share/zoneinfo/Asia/Shanghai /etc/localtime && dpkg-reconfigure -f noninteractive tzdata
+RUN apk --no-cache add tzdata; \
+     apt --no-cache add ca-certificates
 
+# Set directory to map logs, config files, scripts, and SDK
+VOLUME ["/Open-IM-Server/logs", "/Open-IM-Server/config", "/Open-IM-Server/scripts", "/Open-IM-Server/db/sdk"]
 
-#set directory to map logs,config file,scripts file.
-VOLUME ["/Open-IM-Server/logs","/Open-IM-Server/config","/Open-IM-Server/scripts","/Open-IM-Server/db/sdk"]
-
-#Copy scripts files and binary files to the blank image
-COPY --from=build /Open-IM-Server/scripts /Open-IM-Server/scripts
-COPY --from=build /Open-IM-Server/bin /Open-IM-Server/bin
+# Copy scripts and binary files to the production image
+COPY --from=builder /Open-IM-Server/scripts /Open-IM-Server/scripts
+COPY --from=builder /Open-IM-Server/_output/bin/platforms/linux/amd64 /Open-IM-Server/_output/bin/platforms/linux/amd64
 
 WORKDIR /Open-IM-Server/scripts
 
-CMD ["./docker_start_all.sh"]
+CMD ["docker_start_all.sh"]

Makefile

@@ -4,6 +4,7 @@
 
 .DEFAULT_GOAL := help
 
+## all: Run tidy, gen, add-copyright, format, lint, cover, build ✨
 .PHONY: all
 all: tidy gen add-copyright format lint cover build
 
@@ -24,6 +25,8 @@ include scripts/make-rules/copyright.mk
 include scripts/make-rules/gen.mk
 include scripts/make-rules/dependencies.mk
 include scripts/make-rules/tools.mk
+include scripts/make-rules/release.mk
+include scripts/make-rules/swagger.mk
 
 # ==============================================================================
 # Usage
@@ -36,11 +39,12 @@ Options:
 
   BINS             Binaries to build. Default is all binaries under cmd.
                    This option is available when using: make {build}(.multiarch)
-                   Example: make build BINS="open_im_api open_im_cms_api".
+                   Example: make build BINS="openim-api openim-cmdutils".
 
   PLATFORMS        Platform to build for. Default is linux_arm64 and linux_amd64.
                    This option is available when using: make {build}.multiarch
-                   Example: make build.multiarch PLATFORMS="linux_arm64 linux_amd64".
+                   Example: make multiarch PLATFORMS="linux_s390x linux_mips64
+                   linux_mips64le darwin_amd64 windows_amd64 linux_amd64 linux_arm64".
 
   V                Set to 1 enable verbose build. Default is 0.
 endef
@@ -49,120 +53,150 @@ export USAGE_OPTIONS
 # ==============================================================================
 # Targets
 
-## build: Build binaries by default
+## build: Build binaries by default ✨
 .PHONY: build
 build:
 	@$(MAKE) go.build
 
-## build-multiarch: Build binaries for multiple platforms. See option PLATFORMS.
-.PHONY: build-multiarch
-build-multiarch:
+## multiarch: Build binaries for multiple platforms. See option PLATFORMS. ✨
+.PHONY: multiarch
+multiarch:
 	@$(MAKE) go.build.multiarch
 
-## tidy: tidy go.mod
+## install: Install deployment openim ✨
+.PHONY: install
+install:
+	@$(MAKE) go.install
+
+## check: Check OpenIM deployment ✨
+.PHONY: check
+check:
+	@$(MAKE) go.check
+
+## tidy: tidy go.mod ✨
 .PHONY: tidy
 tidy:
 	@$(GO) mod tidy
 
-## vendor: vendor go.mod
+## vendor: vendor go.mod ✨
 .PHONY: vendor
 vendor:
 	@$(GO) mod vendor
 
-## style: code style -> fmt,vet,lint
+## style: code style -> fmt,vet,lint ✨
 .PHONY: style
 style: fmt vet lint
 
-## fmt: Run go fmt against code.
+## fmt: Run go fmt against code. ✨
 .PHONY: fmt
 fmt:
 	@$(GO) fmt ./...
 
-## vet: Run go vet against code.
+## vet: Run go vet against code. ✨
 .PHONY: vet
 vet:
 	@$(GO) vet ./...
 
-## lint: Check syntax and styling of go sources.
+## lint: Check syntax and styling of go sources. ✨
 .PHONY: lint
 lint:
 	@$(MAKE) go.lint
 
-## format: Gofmt (reformat) package sources (exclude vendor dir if existed).
+## format: Gofmt (reformat) package sources (exclude vendor dir if existed). ✨
 .PHONY: format
 format:
 	@$(MAKE) go.format
 
-## test: Run unit test.
+## test: Run unit test. ✨
 .PHONY: test
 test:
 	@$(MAKE) go.test
 
-## cover: Run unit test and get test coverage.
-.PHONY: cover 
+## cover: Run unit test and get test coverage. ✨
+.PHONY: cover
 cover:
 	@$(MAKE) go.test.cover
 
-## updates: Check for updates to go.mod dependencies
+## updates: Check for updates to go.mod dependencies. ✨
 .PHONY: updates
 	@$(MAKE) go.updates
 
-## imports: task to automatically handle import packages in Go files using goimports tool
+## imports: task to automatically handle import packages in Go files using goimports tool. ✨
 .PHONY: imports
 imports:
 	@$(MAKE) go.imports
 
-## clean: Remove all files that are created by building. 
+## clean: Remove all files that are created by building. ✨
 .PHONY: clean
 clean:
 	@$(MAKE) go.clean
 
-## image: Build docker images for host arch.
+## image: Build docker images for host arch. ✨
 .PHONY: image
 image:
 	@$(MAKE) image.build
 
-## image.multiarch: Build docker images for multiple platforms. See option PLATFORMS.
+## image.multiarch: Build docker images for multiple platforms. See option PLATFORMS. ✨
 .PHONY: image.multiarch
 image.multiarch:
 	@$(MAKE) image.build.multiarch
 
-## push: Build docker images for host arch and push images to registry.
+## push: Build docker images for host arch and push images to registry. ✨
 .PHONY: push
 push:
 	@$(MAKE) image.push
 
-## push.multiarch: Build docker images for multiple platforms and push images to registry.
+## push.multiarch: Build docker images for multiple platforms and push images to registry. ✨
 .PHONY: push.multiarch
 push.multiarch:
 	@$(MAKE) image.push.multiarch
 
-## tools: Install dependent tools.
+## tools: Install dependent tools. ✨
 .PHONY: tools
 tools:
 	@$(MAKE) tools.install
 
-## gen: Generate all necessary files.
+## gen: Generate all necessary files. ✨
 .PHONY: gen
 gen:
 	@$(MAKE) gen.run
 
-## verify-copyright: Verify the license headers for all files.
+## swagger: Generate swagger document. ✨
+.PHONY: swagger
+swagger:
+	@$(MAKE) swagger.run
+
+## serve-swagger: Serve swagger spec and docs. ✨
+.PHONY: swagger.serve
+serve-swagger:
+	@$(MAKE) swagger.serve
+
+## verify-copyright: Verify the license headers for all files. ✨
 .PHONY: verify-copyright
 verify-copyright:
 	@$(MAKE) copyright.verify
 
-## add-copyright: Add copyright ensure source code files have license headers.
+## add-copyright: Add copyright ensure source code files have license headers. ✨
 .PHONY: add-copyright
 add-copyright:
 	@$(MAKE) copyright.add
 
-## help: Show this help info.
+## advertise: Project introduction, become a contributor ✨
+.PHONY: advertise
+advertise:
+	@$(MAKE) copyright.advertise
+
+## release: release the project ✨
+.PHONY: release
+release: release.verify release.ensure-tag
+	@scripts/release.sh
+
+## help: Show this help info. ✨
 .PHONY: help
 help: Makefile
 	$(call makehelp)
 
-## help-all: Show all help details info.
+## help-all: Show all help details info. ✨
 .PHONY: help-all
-help-all: go.help copyright.help tools.help image.help help
+help-all: go.help copyright.help tools.help image.help dependencies.help gen.help release.help swagger.help help
 	$(call makeallhelp)

README-zh_CN.md

@@ -19,19 +19,21 @@
 
 <p align="center">
     <a href="./README.md"><b>English</b></a> •
-    <a href="./README_zh.md"><b>中文</b></a>
+    <a href="./README_zh-CN.md"><b>中文</b></a>
 </p>
 
 </p>
 
 ## Open-IM-Server 是什么
 
-Open-IM-Server 是一款即时通讯服务器，使用纯 Golang 开发，采用 JSON over WebSocket 传输协议。在 Open-IM-Server 中，所有东西都是消息，因此您可以轻松扩展自定义消息，而无需修改服务器代码。使用微服务架构，Open-IM-Server 可以使用集群进行部署。通过在客户端服务器上部署 Open-IM-Server，开发人员可以免费快速地将即时通讯和实时网络功能集成到自己的应用程序中，并确保业务数据的安全性和隐私性。
+Open-IM-Server 是一款即时通讯服务器，使用纯 Golang 开发，采用 JSON over WebSocket 传输协议。在 Open-IM-Server 中，所有东西都是消息，因此您可以轻松扩展自定义消息，而无需修改服务器代码。使用微服务架构，Open-IM-Server 可以使用集群进行部署。通过在服务器上部署 Open-IM-Server，开发人员可以快速地将即时通讯和实时网络功能集成到自己的应用程序中，并确保业务数据的安全性和隐私性。
+
+Open-IM-Server并不是一个独立的产品，本身不包含账号的注册和登录服务。
+为方便大家测试，我们开源了包括登录注册功能的 [chat 仓库](https://github.com/OpenIMSDK/chat)，chat 业务服务端和 Open-IM-Server 一起部署，即可搭建一个聊天产品。
 
 ## 特点
 
-+ 免费
-+ 可扩展架构
++ 开源
 + 易于集成
 + 良好的可扩展性
 + 高性能
@@ -40,137 +42,207 @@ Open-IM-Server 是一款即时通讯服务器，使用纯 Golang 开发，采用
 
 ## 社区
 
-+ 访问中文官方网站：[Open-IM中文开发文档](https://doc.rentsoft.cn/)
++ 访问中文官方网站：[OpenIM中文开发文档](https://doc.rentsoft.cn/)
 
 ## 快速开始
 
-### 安装Open-IM-Server
+### 使用 docker-compose 部署
 
-> Open-IM 依赖于五个开源高性能组件：ETCD、MySQL、MongoDB、Redis 和 Kafka。在部署 Open-IM-Server 之前，请确保已安装上述五个组件。如果您的服务器没有上述组件，则必须首先安装缺失组件。如果您已经拥有上述组件，则建议直接使用它们。如果没有，则建议使用 Docker-compose，无需安装依赖项，一键部署，更快更方便。
+1. 克隆项目
 
-### 使用 Docker 部署
+```
+git clone https://github.com/OpenIMSDK/Open-IM-Server 
+cd Open-IM-Server
+git checkout release-v3.0 #or other release branch
+```
 
-1. 安装 [Go 环境](https://golang.org/doc/install)。确保 Go 版本至少为 1.17。
+2. 修改 .env
 
-2. 克隆 Open-IM 项目到您的服务器
+```
+此处主要修改相关组件密码
+USER=root #不用修改
+PASSWORD=openIM123  #8位以上的数字和字母组合密码，密码对redis mysql mongo生效，以及config/config.yaml中的accessSecret
+ENDPOINT=http://127.0.0.1:10005 #minio对外服务的ip和端口，或用域名storage.xx.xx，app要能访问到此ip和端口或域名，
+API_URL=http://127.0.0.1:10002/object/ #app要能访问到此ip和端口或域名，
+DATA_DIR=./  #指定大磁盘目录
+```
 
-   `git clone <https://github.com/OpenIMSDK/Open-IM-Server.git> --recursive`
+3. 部署和启动
 
-3. 部署
+注意：此命令只能执行一次，它会根据.env 中的 PASSWORD 变量修改 docker-compose 中组件密码，并修改 config/config.yaml 中的组件密码
+如果.env 中的密码变了，需要先 docker-compose down ; rm components -rf 后再执行此命令。
 
-   1. 修改 env
+```
+chmod +x install_im_server.sh;
+./install_im_server.sh;
+```
 
-      ```
-      #cd Open-IM-server
-      USER=root
-      PASSWORD=openIM123    #密码至少8位数字，不包括特殊字符
-      ENDPOINT=http://127.0.0.1:10005 #请用互联网IP替换127.0.0.1
-      DATA_DIR=./
-      ```
+4. 检查服务
 
-   2. 部署和启动
+```
+cd scripts;
+./docker_check_service.sh
+```
 
-      ```
-      chmod +x install_im_server.sh;
-      ./install_im_server.sh;
-      ```
+![https://github.com/OpenIMSDK/Open-IM-Server/blob/main/docs/images/docker_build.png](https://github.com/OpenIMSDK/Open-IM-Server/blob/main/docs/images/docker_build.png)
 
-   3. 检查服务
+### 使用源码编译
 
-      ```
-      cd scripts;
-      ./docker_check_service.sh
-      ./check_all.sh
-      ```
-
-      ![https://github.com/OpenIMSDK/Open-IM-Server/blob/main/docs/Open-IM-Servers-on-System.png](https://github.com/OpenIMSDK/Open-IM-Server/blob/main/docs/Open-IM-Servers-on-System.png)
-
-### 使用源代码部署
-
-1. Go 1.17 或更高版本。
+1. Go 1.18或更高版本。
 
 2. 克隆
 
    ```
-   git clone <https://github.com/OpenIMSDK/Open-IM-Server.git> --recursive
-   cd cmd/openim-sdk-core
-   git checkout main
+   git clone https://github.com/OpenIMSDK/Open-IM-Server 
+   cd Open-IM-Server
+   git checkout release-v3.0 #or other release branch
    ```
 
-3. 设置可执行权限
+3. 编译
 
    ```
-   cd ../../scripts/
+   cd Open-IM-server/scripts
    chmod +x *.sh
+   ./build_all_service.sh
    ```
 
-4. 构建
+所有服务已成功构建如图所示
 
-   ```
-   ./batch_build_all_service.sh
-   ```
+![编译成功](https://github.com/OpenIMSDK/Open-IM-Server/blob/main/docs/images/build.png)
 
-所有服务已成功构建
+### 组件配置说明
 
-### 配置说明
+config/config.yaml中针对存储组件有详细的配置说明
 
-> Open-IM 配置分为基本组件配置和业务内部服务配置。当使用产品时，开发人员需要将每个组件的地址填写为其服务器组件的地址，并确保业务内部服务端口未被占用。
-
-### 基本组件配置说明
-
-+ ETCD
-  + Etcd 用于 RPC 服务的发现和注册，Etcd Schema 是注册名称的前缀，建议将其修改为公司名称，Etcd 地址(ip+port)支持集群部署，可以填写多个 ETCD 地址，也可以只有一个 etcd 地址。
++ Zookeeper
+  + 用于RPC 服务发现和注册，支持集群。
+  
+    ````
+    ```
+    zookeeper:
+      schema: openim                          #不建议修改
+      address: [ 127.0.0.1:2181 ]             #地址
+      username:                               #用户名
+      password:                               #密码
+    ```
+    ````
+  
+    
+  
 + MySQL
-  + MySQL 用于消息和用户关系的全存储，暂时不支持集群部署。修改地址、用户、密码和数据库名称。
+  
+  + 用于存储用户、关系链、群组，支持数据库主备。
+  
+    ```
+    mysql:
+      address: [ 127.0.0.1:13306 ]            #地址
+      username: root                          #用户名
+      password: openIM123                     #密码
+      database: openIM_v2                     #不建议修改
+      maxOpenConn: 1000                       #最大连接数
+      maxIdleConn: 100                        #最大空闲连接数
+      maxLifeTime: 60                         #连接可以重复使用的最长时间（秒）
+      logLevel: 4                             #日志级别 1=slient 2=error 3=warn 4=info
+      slowThreshold: 500                      #慢语句阈值 （毫秒）
+    ```
+  
+    
+  
 + Mongo
-  + Mongo 用于消息的离线存储，默认存储 7 天。暂时不支持集群部署。只需修改地址和数据库名称即可。
+  + 用于存储离线消息，支持mongo分片集群。
+  
+    ```
+    mongo:
+      uri:                                    #不为空则直接使用该值
+      address: [ 127.0.0.1:37017 ]            #地址
+      database: openIM                        #mongo db 默认即可
+      username: root                          #用户名
+      password: openIM123                     #密码
+      maxPoolSize: 100                        #最大连接数
+    ```
+  
 + Redis
-  + Redis 目前主要用于消息序列号存储和用户令牌信息存储。暂时不支持集群部署。只需修改相应的 Redis 地址和密码即可。
+  + 用于存储消息序列号、最新消息、用户token及mysql缓存，支持集群部署。
+  
+    ```
+    redis:
+      address: [ 127.0.0.1:16379 ]            #地址
+      username:                               #用户名
+      password: openIM123                     #密码
+    ```
+  
 + Kafka
-  + Kafka 用作消息传输存储队列，支持集群部署，只需修改相应的地址。
+  + 用于消息队列，用于消息解耦，支持集群部署。
+  
+    ```
+    kafka:
+      username:                               #用户名
+      password:                               #密码
+      addr: [ 127.0.0.1:9092 ]                #地址
+      latestMsgToRedis:
+        topic: "latestMsgToRedis"
+      offlineMsgToMongo:
+        topic: "offlineMsgToMongoMysql"
+      msgToPush:
+        topic: "msqToPush"
+      msgToModify:
+        topic: "msgToModify"
+      consumerGroupID:
+        msgToRedis: redis
+        msgToMongo: mongo
+        msgToMySql: mysql
+        msgToPush: push
+        msgToModify: modify
+    ```
 
-### 内部服务配置说明
+### 启停服务
 
-+ credential&&push
-  + Open-IM 需要使用三方离线推送功能。目前使用的是腾讯的三方推送，支持 IOS、Android 和 OSX 推送。这些信息是腾讯推送的一些注册信息，开发人员需要去腾讯云移动推送注册相应的信息。如果您没有填写相应的信息，则无法使用离线消息推送功能。
-+ api&&rpcport&&longconnsvr&&rpcregistername
-  + API 端口是 HTTP 接口，longconnsvr 是 WebSocket 监听端口，rpcport 是内部服务启动端口。两者都支持集群部署。请确保这些端口未被使用。如果要为单个服务打开多个服务，请填写多个以逗号分隔的端口。rpcregistername 是每个服务在注册表 Etcd 中注册的服务名称，无需修改。
-+ log&&modulename
-  + 日志配置包括日志文件的存储路径，日志发送到 Elasticsearch 进行日志查看。目前不支持将日志发送到 Elasticsearch。暂时不需要修改配置。modulename 用于根据服务模块的名称拆分日志。默认配置可以。
+启动服务
 
-### 脚本说明
+```
+./start_all.sh;
+```
 
-> Open-IM 脚本提供服务编译、启动和停止脚本。有四个 Open-IM 脚本启动模块，一个是 http+rpc 服务启动模块，第二个是 WebSocket 服务启动模块，然后是 msg_transfer 模块，最后是 push 模块。
+检查服务
 
-+ path_info.cfg&&style_info.cfg&&
+```
+./check_all.sh
+```
 
-  functions.sh
+停止服务
 
-  + 包含每个模块的路径信息，包括源代码所在的路径、服务启动名称、shell 打印字体样式以及一些用于处理 shell 字符串的函数。
+```
+./stop_all.sh
+```
 
-+ build_all_service.sh
+### 开放 IM 端口
 
-  + 编译模块，将 Open-IM 的所有源代码编译为二进制文件并放入 bin 目录。
+| TCP 端口  | 说明                                                  | 操作                                    |
+| --------- | ----------------------------------------------------- | --------------------------------------- |
+| TCP:10001 | ws 协议，消息端口，如消息发送、推送等，用于客户端 SDK | 端口放行或 nginx 反向代理，并关闭防火墙 |
+| TCP:10002 | api 端口，如用户、好友、群组、消息等接口。            | 端口放行或 nginx 反向代理，并关闭防火墙 |
+| TCP:10005 | 选择 minio 存储时需要(openIM 默认使用 minio 存储)     | 端口放行或 nginx 反向代理，并关闭防火墙 |
 
-+ start_rpc_api_service.sh&&msg_gateway_start.sh&&msg_transfer_start.sh&&push_start.sh
+### 开放 Chat 端口
 
-  + 独立脚本启动模块，后跟 API 和 RPC 模块、消息网关模块、消息传输模块和推送模块。
+| TCP 端口  | 说明                     | 操作                                    |
+| --------- | ------------------------ | --------------------------------------- |
+| TCP:10008 | 业务系统，如注册、登录等 | 端口放行或 nginx 反向代理，并关闭防火墙 |
+| TCP:10009 | 管理后台，如统计、封号等 | 端口放行或 nginx 反向代理，并关闭防火墙 |
 
-+ start_all.sh&&stop_all.sh
+## APP和OpenIM关系
 
-  + 总脚本，启动所有服务和关闭所有服务。
+OpenIM 是开源的即时通讯组件，它并不是一个独立的产品，此图展示了AppServer、AppClient、Open-IM-Server以及Open-IM-SDK之间的关系
 
-## 认证流程图
+![https://github.com/OpenIMSDK/Open-IM-Server/blob/main/docs/open-im-server.png](https://github.com/OpenIMSDK/Open-IM-Server/blob/main/docs/images/open-im-server.png)
 
-![https://github.com/OpenIMSDK/Open-IM-Server/blob/main/docs/open-im-server.png](https://github.com/OpenIMSDK/Open-IM-Server/blob/main/docs/open-im-server.png)
+## 整体架构
 
-## 架构
-
-![https://github.com/OpenIMSDK/Open-IM-Server/blob/main/docs/Architecture.jpg](https://github.com/OpenIMSDK/Open-IM-Server/blob/main/docs/Architecture.jpg)
+![https://github.com/OpenIMSDK/Open-IM-Server/blob/main/docs/Architecture.jpg](https://github.com/OpenIMSDK/Open-IM-Server/blob/main/docs/images/Architecture.jpg)
 
 ## 开始开发 OpenIM
 
-[社区存储库](https://github.com/OpenIMSDK/community)包含有关从源代码构建 Kubernetes、如何贡献代码和文档、有关什么的联系人等所有信息。
+[社区存储库](https://github.com/OpenIMSDK/community)包含有关从源代码构建 Kubernetes、如何贡献代码和文档。
 
 ## 贡献
 

README.md

@@ -1,16 +1,19 @@
-<h1 align="center" style="border-bottom: none">
-    <b>
-        <a href="https://doc.rentsoft.cn/">Open IM Server</a><br>
-    </b>
-    ⭐️  Open source Instant Messaging Server  ⭐️ <br>
-</h1>
+<p align="center">
+    <a href="https://www.openim.online">
+        <img src="./assets/logo-gif/openim-logo.gif" width="60%" height="30%"/>
+    </a>
+</p>
+
+<h3 align="center" style="border-bottom: none">
+    ⭐️  Open source Instant Messaging Server ⭐️ <br>
+<h3>
 
 
 <p align=center>
 <a href="https://goreportcard.com/report/github.com/OpenIMSDK/Open-IM-Server"><img src="https://goreportcard.com/badge/github.com/OpenIMSDK/Open-IM-Server" alt="A+"></a>
 <a href="https://github.com/OpenIMSDK/Open-IM-Server/issues?q=is%3Aissue+is%3Aopen+sort%3Aupdated-desc+label%3A%22good+first+issue%22"><img src="https://img.shields.io/github/issues/OpenIMSDK/Open-IM-Server/good%20first%20issue?logo=%22github%22" alt="good first"></a>
 <a href="https://github.com/OpenIMSDK/Open-IM-Server"><img src="https://img.shields.io/github/stars/OpenIMSDK/Open-IM-Server.svg?style=flat&logo=github&colorB=deeppink&label=stars"></a>
-<a href="https://join.slack.com/t/openimsdk/shared_invite/zt-1tmoj26uf-_FDy3dowVHBiGvLk9e5Xkg"><img src="https://img.shields.io/badge/Slack-100%2B-blueviolet?logo=slack&amp;logoColor=white"></a>
+<a href="https://join.slack.com/t/openimsdk/shared_invite/zt-1tmoj26uf-_FDy3dowVHBiGvLk9e5Xkg"><img src="https://img.shields.io/badge/Slack-300%2B-blueviolet?logo=slack&amp;logoColor=white"></a>
 <a href="https://github.com/OpenIMSDK/Open-IM-Server/blob/main/LICENSE"><img src="https://img.shields.io/badge/license-Apache--2.0-green"></a>
 <a href="https://golang.org/"><img src="https://img.shields.io/badge/Language-Go-blue.svg"></a>
 </p>
@@ -26,142 +29,206 @@
 
 ## What is Open-IM-Server
 
-Instant messaging server. Backend in pure Golang, wire transport protocol is JSON over websocket.
-Everything is a message in Open-IM-Server, so you can extend custom messages easily, there is no need to modify the server code.
-Using microservice architectures, Open-IM-Server can be deployed using clusters.
-By deployment of the Open-IM-Server on the customer's server, developers can integrate instant messaging and real-time network capabilities into their own applications free of charge and quickly, and ensure the security and privacy of business data.
+Open-IM-Server is an instant messaging server developed using pure Golang, adopting JSON over WebSocket as the communication protocol. In Open-IM-Server, everything is a message, so you can easily extend custom messages without modifying the server code. With a microservice architecture, Open-IM-Server can be deployed using clusters. By deploying Open-IM-Server on a server, developers can quickly integrate instant messaging and real-time networking features into their applications, ensuring the security and privacy of business data.
+
+Open-IM-Server is not a standalone product and does not include account registration and login services. For your convenience, we have open-sourced the [chat repository](https://github.com/OpenIMSDK/chat) which includes login and registration functionality. By deploying the chat business server alongside Open-IM-Server, a chat product can be set up.
 
 ## Features
 
-- Everything in Free
-- Scalable architecture
-- Easy integration
-- Good scalability
+- Open source
+- Easy to integrate
+- Excellent scalability
 - High performance
 - Lightweight
 - Supports multiple protocols
 
 ## Community
-- Visit the Chinese official website here: [📚 Open-IM docs](https://www.openim.online/zh)
+- Visit the official website: [OpenIM  Developer Documentation](https://www.openim.online/)
 
-## Quick start
+## Quick Start
 
-### Installing Open-IM-Server
+### Deploying with docker-compose
 
-> Open-IM relies on five open source high-performance components: ETCD, MySQL, MongoDB, Redis, and Kafka. Privatization deployment Before Open-IM-Server, please make sure that the above five components have been installed. If your server does not have the above components, you must first install Missing components. If you have the above components, it is recommended to use them directly. If not, it is recommended to use Docker-compose, no To install dependencies, one-click deployment, faster and more convenient.
+1. Clone the project
 
-#### Deploy using Docker
-
-1. Install [Go environment](https://golang.org/doc/install). Make sure Go version is at least 1.17
-
-2. Clone the Open-IM project to your server
-
-   ```
-   git clone https://github.com/OpenIMSDK/Open-IM-Server.git --recursive
-   ```
-
-3. Deploy
-
-    1. Modify env
-
-       ```
-       #cd Open-IM-server
-       USER=root  
-       PASSWORD=openIM123    #Password with more than 8 digits, excluding special characters
-       ENDPOINT=http://127.0.0.1:10005 #Replace 127.0.0.1 with Internet IP
-       DATA_DIR=./ 
-       ```
-
-    2. Deploy && Start
-    
-       ```
-       chmod +x install_im_server.sh;
-       ./install_im_server.sh;
-       ```
-    
-    4. Check service
-    
-       ```
-       cd scripts;
-       ./docker_check_service.sh./check_all.sh
-       ```
-       
-       ![OpenIMServersonSystempng](https://github.com/OpenIMSDK/Open-IM-Server/blob/main/docs/Open-IM-Servers-on-System.png)
-
-#### Deploy using source code
-
-1. Go 1.17 or above.
-2. Clone
-
-```shell
-git clone https://github.com/OpenIMSDK/Open-IM-Server.git --recursive 
-cd cmd/openim-sdk-core
-git checkout main
+```bash
+# choose what you need
+BRANCH=release-v3.0
+git clone -b $BRANCH https://github.com/OpenIMSDK/Open-IM-Server openim && export openim=$(pwd)/openim && cd $openim && make build
 ```
 
-1. Set executable permissions
+2. Modify .env
 
-```shell
-cd ../../scripts/
-chmod +x *.sh
+```bash
+USER=root #no need to modify
+PASSWORD=openIM123  #A combination of 8 or more numbers and letters, this password applies to redis, mysql, mongo, as well as accessSecret in config/config.yaml
+ENDPOINT=http://127.0.0.1:10005 #minio's external service IP and port, or use the domain name storage.xx.xx, the app must be able to access this IP and port or domain,
+API_URL=http://127.0.0.1:10002/object/ #the app must be able to access this IP and port or domain,
+DATA_DIR=./  #designate large disk directory
 ```
 
-1. build
+3. Deploy and start
 
-```shell
-./batch_build_all_service.sh
+> **Note**
+> This command can only be executed once. It will modify the component passwords in docker-compose based on the PASSWORD variable in .env, and modify the component passwords in config/config.yaml. If the password in .env changes, you need to first execute docker-compose down; rm components -rf and then execute this command.
+
+```
+make install
 ```
 
-all services build success
+4. Check the service
 
-### CONFIGURATION INSTRUCTIONS
+```bash
+make check
+```
 
-> Open-IM configuration is divided into basic component configuration and business internal service configuration. Developers need to fill in the address of each component as the address of their server component when using the product, and ensure that the internal service port of the business is not occupied
+![https://github.com/OpenIMSDK/Open-IM-Server/blob/main/docs/images/docker_build.png](https://github.com/OpenIMSDK/Open-IM-Server/blob/main/docs/images/docker_build.png)
 
-#### Basic Component Configuration Instructions
 
-- ETCD
-    - Etcd is used for the discovery and registration of rpc services, etcd Schema is the prefix of the registered name, it is recommended to modify it to your company name, etcd address (ip+port) supports clustered deployment, you can fill in multiple ETCD addresses separated by commas, and also only one etcd address.
+
+### Compile from source
+
+Ur need `Go 1.18` or higher version, and `make`.
+```bash
+# choose what you need
+BRANCH=release-v3.0
+git clone -b $BRANCH https://github.com/OpenIMSDK/Open-IM-Server openim && export openim=$(pwd)/openim && cd $openim && make build
+```
+Read about the [OpenIM Version Policy](https://github.com/OpenIMSDK/Open-IM-Server/blob/main/docs/conversions/version.md)
+
+`make help` to help you see the instructions supported by OpenIM.
+
+All services have been successfully built as shown in the figure
+
+![Successful Compilation](https://github.com/OpenIMSDK/Open-IM-Server/blob/main/docs/images/build.png)
+
+### Component Configuration Instructions
+
+The config/config.yaml file has detailed configuration instructions for the storage components.
+
+- Zookeeper
+
+  - Used for RPC service discovery and registration, cluster support.
+
+    ```
+    zookeeper:
+      schema: openim                          #Not recommended to modify
+      address: [ 127.0.0.1:2181 ]             #address
+      username:                               #username
+      password:                               #password
+    ```
+
 - MySQL
-    - mysql is used for full storage of messages and user relationships. Cluster deployment is not supported for the time being. Modify addresses and users, passwords, and database names.
+
+  - Used for storing users, relationships, and groups, supports master-slave database.
+
+    ```
+    mysql:
+      address: [ 127.0.0.1:13306 ]            #address
+      username: root                          #username
+      password: openIM123                     #password
+      database: openIM_v2                     #Not recommended to modify
+      maxOpenConn: 1000                       #maximum connection
+      maxIdleConn: 100                        #maximum idle connection
+      maxLifeTime: 60                         #maximum time a connection can be reused (seconds)
+      logLevel: 4                             #log level 1=slient 2=error 3=warn 4=info
+      slowThreshold: 500                      #slow statement threshold (milliseconds)
+    ```
+
 - Mongo
-    - Mongo is used for offline storage of messages. The default storage is 7 days. Cluster deployment is temporarily not supported. Just modify the address and database name.
+
+  - Used for storing offline messages, supports mongo sharded clusters.
+
+    ```
+    mongo:
+      uri:                                    #Use this value directly if not empty
+      address: [ 127.0.0.1:37017 ]            #address
+      database: openIM                        #default mongo db
+      username: root                          #username
+      password: openIM123                     #password
+      maxPoolSize: 100                        #maximum connections
+    ```
+
 - Redis
-    - Redis is currently mainly used for message serial number storage and user token information storage. Cluster deployment is temporarily not supported. Just modify the corresponding redis address and password.
+
+  - Used for storing message sequence numbers, latest messages, user tokens, and mysql cache, supports cluster deployment.
+
+    ```
+    redis:
+      address: [ 127.0.0.1:16379 ]            #address
+      username:                               #username
+      password: openIM123                     #password
+    ```
+
 - Kafka
-    - Kafka is used as a message transfer storage queue to support cluster deployment, just modify the corresponding address
 
-#### Internal Service Configuration Instructions
+  - Used for message queues, for message decoupling, supports cluster deployment.
 
-- credential&&push
-    - The Open-IM needs to use the three-party offline push function. Currently, Tencent's three-party push is used. It supports IOS, Android and OSX push. This information is some registration information pushed by Tencent. Developers need to go to Tencent Cloud Mobile Push to register the corresponding information. If you do not fill in the corresponding information, you cannot use the offline message push function
-- api&&rpcport&&longconnsvr&&rpcregistername
-    - The api port is the http interface, longconnsvr is the websocket listening port, and rpcport is the internal service startup port. Both support cluster deployment. Make sure that these ports are not used. If you want to open multiple services for a single service, fill in multiple ports separated by commas. rpcregistername is the service name registered by each service to the registry etcd, no need to modify
-- log&&modulename
-    - The log configuration includes the storage path of the log file, and the log is sent to elasticsearch for log viewing. Currently, the log is not supported to be sent to elasticsearch. The configuration does not need to be modified for the time being. The modulename is used to split the log according to the name of the service module. The default configuration is fine.
-- multiloginpolicy&&tokenpolicy
-    - Open-IM supports multi-terminal login. Currently, there are three multi-terminal login policies. The PC terminal and the mobile terminal are online at the same time by default. When multiple policies are configured to be true, the first policy with true is used by default, and the token policy is the generated token policy. , The developer can customize the expiration time of the token
+    ```
+    kafka:
+      username:                               #username
+      password:                               #password
+      addr: [ 127.0.0.1:9092 ]                #address
+      latestMsgToRedis:
+        topic: "latestMsgToRedis"
+      offlineMsgToMongo:
+        topic: "offlineMsgToMongoMysql"
+      msgToPush:
+        topic: "msqToPush"
+      msgToModify:
+        topic: "msgToModify"
+      consumerGroupID:
+        msgToRedis: redis
+        msgToMongo: mongo
+        msgToMySql: mysql
+        msgToPush: push
+        msgToModify: modify
+    ```
 
-### scripts DESCRIPTION
+### Start and Stop Services
 
-> Open-IM scripts provides service compilation, start, and stop scripts. There are four Open-IM scripts start modules, one is the http+rpc service start module, the second is the websocket service start module, then the msg_transfer module, and the last is the push module
+Start services
 
-- path_info.cfg&&style_info.cfg&&functions.sh
-    - Contains the path information of each module, including the path where the source code is located, the name of the service startup, the shell print font style, and some functions for processing shell strings
-- build_all_service.sh
-    - Compile the module, compile all the source code of Open-IM into a binary file and put it into the bin directory
-- start_rpc_api_service.sh&&msg_gateway_start.sh&&msg_transfer_start.sh&&push_start.sh
-    - Independent scripts startup module, followed by api and rpc modules, message gateway module, message transfer module, and push module
-- start_all.sh&&stop_all.sh
-    - Total scripts, start all services and close all services
+```
+./start_all.sh;
+```
 
-## Authentication Clow Chart 
+Check services
 
-![avatar](https://github.com/OpenIMSDK/Open-IM-Server/blob/main/docs/open-im-server.png)
+```
+./check_all.sh
+```
 
-## Architecture
+Stop services
 
-![avatar](https://github.com/OpenIMSDK/Open-IM-Server/blob/main/docs/Architecture.jpg)
+```
+./stop_all.sh
+```
+
+### Open IM Ports
+
+| TCP Port  | Description                                                  | Operation                                             |
+| --------- | ------------------------------------------------------------ | ----------------------------------------------------- |
+| TCP:10001 | ws protocol, message port such as message sending, pushing etc, used for client SDK | Port release or nginx reverse proxy, and firewall off |
+| TCP:10002 | api port, such as user, friend, group, message interfaces.   | Port release or nginx reverse proxy, and firewall off |
+| TCP:10005 | Required when choosing minio storage (openIM uses minio storage by default) | Port release or nginx reverse proxy, and firewall off |
+
+### Open Chat Ports
+
+| TCP Port  | Description                                         | Operation                                             |
+| --------- | --------------------------------------------------- | ----------------------------------------------------- |
+| TCP:10008 | Business system, such as registration, login etc    | Port release or nginx reverse proxy, and firewall off |
+| TCP:10009 | Management backend, such as statistics, banning etc | Port release or nginx reverse proxy, and firewall off |
+
+## Relationship Between APP and OpenIM
+
+OpenIM is an open source instant messaging component, it is not an independent product. This image shows the relationship between AppServer, AppClient, Open-IM-Server and Open-IM-SDK.
+
+![https://github.com/OpenIMSDK/Open-IM-Server/blob/main/docs/open-im-server.png](https://github.com/OpenIMSDK/Open-IM-Server/blob/main/docs/images/open-im-server.png)
+
+## Overall Architecture
+
+![https://github.com/OpenIMSDK/Open-IM-Server/blob/main/docs/Architecture.jpg](https://github.com/OpenIMSDK/Open-IM-Server/blob/main/docs/images/Architecture.jpg)
 
 ## To start developing OpenIM
 The [community repository](https://github.com/OpenIMSDK/community) hosts all information about building Kubernetes from source, how to contribute code and documentation, who to contact about what, etc.
@@ -180,7 +247,7 @@ We take notes of each [biweekly meeting](https://github.com/OpenIMSDK/Open-IM-Se
 ## Who are using Open-IM-Server
 The [user case studies](https://github.com/OpenIMSDK/community/blob/main/ADOPTERS.md) page includes the user list of the project. You can leave a [📝comment](https://github.com/OpenIMSDK/Open-IM-Server/issues/379) to let us know your use case.
 
-![avatar](https://github.com/OpenIMSDK/OpenIM-Docs/blob/main/docs/images/WechatIMG20.jpeg)
+![avatar](https://openim-1253691595.cos.ap-nanjing.myqcloud.com/WechatIMG20.jpeg)
 
 ## License
 

assets/README.md

@@ -0,0 +1,32 @@
+# `/assets`
+
+The `/assets` directory in the OpenIM repository contains various assets such as images, logos, and animated GIFs. These assets serve different purposes and contribute to the functionality and aesthetics of the OpenIM project.
+
+## Directory Structure:
+
+```bash
+assets/
+├── README.md                     # Documentation for the assets directory
+├── images                        # Directory holding images related to OpenIM
+│   ├── architecture.png          # Image depicting the architecture of OpenIM
+│   └── mvc.png                   # Image illustrating the Model-View-Controller (MVC) pattern
+├── intive-slack.png              # Image displaying the Intive Slack logo
+├── logo                          # Directory containing various logo variations for OpenIM
+│   ├── openim-logo-black.png     # OpenIM logo with a black background
+│   ├── openim-logo-blue.png      # OpenIM logo with a blue background
+│   ├── openim-logo-green.png     # OpenIM logo with a green background
+│   ├── openim-logo-purple.png    # OpenIM logo with a purple background
+│   ├── openim-logo-white.png     # OpenIM logo with a white background
+│   ├── openim-logo-yellow.png    # OpenIM logo with a yellow background
+│   └── openim-logo.png           # OpenIM logo with a transparent background
+└── logo-gif                      # Directory containing animated GIF versions of the OpenIM logo
+    └── openim-log.gif            # Animated OpenIM logo with a transparent background
+```
+
+## Copyright Notice:
+
+The OpenIM logo, including its variations and animated versions, displayed in this repository [OpenIM](https://github.com/OpenIMSDK/openim) under the `/assets/logo` and `/assets/logo-gif` directories, are protected by copyright laws.
+
+The logo design is credited to @Xx(席欣).
+
+Please respect the intellectual property rights and refrain from unauthorized use and distribution of these assets.

assets/logo-gif/LICENSE

@@ -0,0 +1 @@
+# The OpenIM logo files are licensed under a choice of either Apache-2.0 or CC-BY-4.0 (Creative Commons Attribution 4.0 International).

assets/logo/LICENSE

@@ -0,0 +1 @@
+# The OpenIM logo files are licensed under a choice of either Apache-2.0 or CC-BY-4.0 (Creative Commons Attribution 4.0 International).

build/docker/openim-api/Dockerfile

@@ -0,0 +1,12 @@
+FROM golang:1.20.0 as build
+
+WORKDIR /openim
+
+RUN ln -sf /usr/share/zoneinfo/Asia/Shanghai /etc/localtime && \
+      echo "Asia/Shanghai" > /etc/timezone && \
+      mkdir -p /var/log/miniblog
+
+COPY miniblog /openim
+
+EXPOSE 10002
+CMD ["./bin/openim-api","--port", "10002"]

cmd/api/deploy.Dockerfile

@@ -1,18 +0,0 @@
-FROM ubuntu
-
-WORKDIR /Open-IM-Server/bin
-
-RUN apt-get update && apt-get install apt-transport-https && apt-get install procps\
-&&apt-get install net-tools
-#Non-interactive operation
-ENV DEBIAN_FRONTEND=noninteractive
-RUN apt-get install -y vim curl tzdata gawk
-#Time zone adjusted to East eighth District
-RUN ln -fs /usr/share/zoneinfo/Asia/Shanghai /etc/localtime && dpkg-reconfigure -f noninteractive tzdata
-RUN apt-get -qq update \
-    && apt-get -qq install -y --no-install-recommends ca-certificates curl
-COPY ./open_im_api ./
-
-VOLUME ["/Open-IM-Server/logs","/Open-IM-Server/config"]
-
-CMD ["./open_im_api","--port", "10002"]

cmd/crontask/deploy.Dockerfile

@@ -1,18 +0,0 @@
-FROM ubuntu
-
-WORKDIR /Open-IM-Server/bin
-
-RUN apt-get update && apt-get install apt-transport-https && apt-get install procps\
-&&apt-get install net-tools
-#Non-interactive operation
-ENV DEBIAN_FRONTEND=noninteractive
-RUN apt-get install -y vim curl tzdata gawk
-#Time zone adjusted to East eighth District
-RUN ln -fs /usr/share/zoneinfo/Asia/Shanghai /etc/localtime && dpkg-reconfigure -f noninteractive tzdata
-RUN apt-get -qq update \
-    && apt-get -qq install -y --no-install-recommends ca-certificates curl
-COPY ./open_im_cron_task ./
-
-VOLUME ["/Open-IM-Server/logs","/Open-IM-Server/config"]
-
-CMD ["./open_im_cron_task"]

cmd/crontask/main.go

@@ -1,13 +0,0 @@
-package main
-
-import (
-	"github.com/OpenIMSDK/Open-IM-Server/internal/tools"
-	"github.com/OpenIMSDK/Open-IM-Server/pkg/common/cmd"
-)
-
-func main() {
-	cronTaskCmd := cmd.NewCronTaskCmd()
-	if err := cronTaskCmd.Exec(tools.StartCronTask); err != nil {
-		panic(err.Error())
-	}
-}

cmd/msggateway/deploy.Dockerfile

@@ -1,18 +0,0 @@
-FROM ubuntu
-
-WORKDIR /Open-IM-Server/bin
-
-RUN apt-get update && apt-get install apt-transport-https && apt-get install procps\
-&&apt-get install net-tools
-#Non-interactive operation
-ENV DEBIAN_FRONTEND=noninteractive
-RUN apt-get install -y vim curl tzdata gawk
-#Time zone adjusted to East eighth District
-RUN ln -fs /usr/share/zoneinfo/Asia/Shanghai /etc/localtime && dpkg-reconfigure -f noninteractive tzdata
-RUN apt-get -qq update \
-    && apt-get -qq install -y --no-install-recommends ca-certificates curl
-COPY ./open_im_msg_gateway ./
-
-VOLUME ["/Open-IM-Server/logs","/Open-IM-Server/config"]
-
-CMD ["./open_im_msg_gateway","--port", "10140" "--ws_port", "10001"， "--prometheus_port", "20240"]

cmd/msggateway/main.go

@@ -1,15 +0,0 @@
-package main
-
-import (
-	"github.com/OpenIMSDK/Open-IM-Server/pkg/common/cmd"
-)
-
-func main() {
-	msgGatewayCmd := cmd.NewMsgGatewayCmd()
-	msgGatewayCmd.AddWsPortFlag()
-	msgGatewayCmd.AddPortFlag()
-	msgGatewayCmd.AddPrometheusPortFlag()
-	if err := msgGatewayCmd.Exec(); err != nil {
-		panic(err.Error())
-	}
-}

cmd/msgtransfer/Makefile

@@ -1,34 +0,0 @@
-.PHONY: all build run gotool install clean help
-
-NAME=open_im_msg_transfer
-BIN_DIR=../../bin/
-
-OS:= $(or $(os),linux)
-ARCH:=$(or $(arch),amd64)
-all: gotool build
-
-ifeq ($(OS),windows)
-
-BINARY_NAME=${NAME}.exe
-
-else
-
-BINARY_NAME=${NAME}
-
-endif
-
-build:
-	CGO_ENABLED=0 GOOS=${OS} GOARCH=${ARCH}; go build -ldflags="-w -s" -o ${BINARY_NAME}
-
-run:
-	@go run ./
-
-gotool:
-	go fmt ./
-	go vet ./
-
-install:build
-	mv ${BINARY_NAME} ${BIN_DIR}
-
-clean:
-	@if [ -f ${BINARY_NAME} ] ; then rm ${BINARY_NAME} ; fi

cmd/msgtransfer/deploy.Dockerfile

@@ -1,18 +0,0 @@
-FROM ubuntu
-
-WORKDIR /Open-IM-Server/bin
-
-RUN apt-get update && apt-get install apt-transport-https && apt-get install procps\
-&&apt-get install net-tools
-#Non-interactive operation
-ENV DEBIAN_FRONTEND=noninteractive
-RUN apt-get install -y vim curl tzdata gawk
-#Time zone adjusted to East eighth District
-RUN ln -fs /usr/share/zoneinfo/Asia/Shanghai /etc/localtime && dpkg-reconfigure -f noninteractive tzdata
-RUN apt-get -qq update \
-    && apt-get -qq install -y --no-install-recommends ca-certificates curl
-COPY ./open_im_msg_transfer ./
-
-VOLUME ["/Open-IM-Server/logs","/Open-IM-Server/config"]
-
-CMD ["./open_im_msg_transfer","--prometheus_port", "21400"]

cmd/msgtransfer/main.go

@@ -1,13 +0,0 @@
-package main
-
-import (
-	"github.com/OpenIMSDK/Open-IM-Server/pkg/common/cmd"
-)
-
-func main() {
-	msgTransferCmd := cmd.NewMsgTransferCmd()
-	msgTransferCmd.AddPrometheusPortFlag()
-	if err := msgTransferCmd.Exec(); err != nil {
-		panic(err.Error())
-	}
-}

cmd/openim-api/Makefile

@@ -1,6 +1,6 @@
 .PHONY: all build run gotool install clean help
 
-NAME=open_im_api
+NAME=openim-api
 BIN_DIR=../../bin/
 
 OS:= $(or $(os),linux)

cmd/openim-api/deploy.Dockerfile

@@ -0,0 +1,32 @@
+# Copyright © 2023 OpenIM. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+FROM ubuntu
+
+WORKDIR /Open-IM-Server/bin
+
+RUN apt-get update && apt-get install apt-transport-https && apt-get install procps\
+&&apt-get install net-tools
+#Non-interactive operation
+ENV DEBIAN_FRONTEND=noninteractive
+RUN apt-get install -y vim curl tzdata gawk
+#Time zone adjusted to East eighth District
+RUN ln -fs /usr/share/zoneinfo/Asia/Shanghai /etc/localtime && dpkg-reconfigure -f noninteractive tzdata
+RUN apt-get -qq update \
+    && apt-get -qq install -y --no-install-recommends ca-certificates curl
+COPY ./openim-api ./
+
+VOLUME ["/Open-IM-Server/logs","/Open-IM-Server/config"]
+
+CMD ["./openim-api","--port", "10002"]